Powered anode rods. Local GSHA installation.
Your Authorized Corro-Protec Dealer in Northern Illinois
GSHA Services, LTD is an authorized Corro-Protec dealer and installer. From our Woodstock headquarters and our Lake Bluff office, our own plumbing crews and licensed electricians fit Corro-Protec powered anode rods into tank-type water heaters for homeowners in McHenry, Lake, Boone, Kane, DuPage, Cook and Will counties.
A Corro-Protec rod replaces the magnesium or aluminum anode that slowly dissolves inside most water heaters. Instead of giving up its own metal, it protects the steel tank with a small electric current, and Corro-Protec says it can stop the rotten-egg smell that a sacrificial anode helps create. Every job starts with a free estimate in which we confirm your tank’s port, size and clearance so the right model goes in the first time. Request a free estimate or call (224) 220-3660.
Authorized Corro-Protec Dealer & InstallerGSHA Services, LTD · Woodstock & Lake Bluff, IL
An authorized Corro-Protec dealer with its own crews
Why buying through an authorized dealer matters
Corro-Protec’s limited warranty lists products bought from an unauthorized reseller among its exclusions, alongside improper installation, installation in the wrong port, an incompatible water heater and an unauthorized power supply. Buying the rod from GSHA, an authorized Corro-Protec dealer, and having GSHA install it addresses the first of those, and the way we install it is designed to address the rest. (Source: Corro-Protec Limited Warranty, corroprotec.com.)
Our own plumbers, our own licensed electricians
The technician who opens your water heater works for GSHA. We shut the heater down safely, relieve pressure, remove the old anode (which is often seized after years in hot water), fit the correct Corro-Protec model, check for leaks and restart the heater. If there is no outlet within reach of the power supply’s 12-foot cord, GSHA’s own licensed electricians can add one. Because GSHA also installs and services tank and tankless water heaters, water softeners and filtration, the advice you get covers the whole water system, not just one part.
Questions before you book?
Call (224) 220-3660 or email info@gshaservices.com. A photo of the label on your water heater helps us identify the model and anode location before we arrive.
More from GSHA on Corro-Protec and water heaters
- Corro-Protec powered anode rod installation (our product overview page)
- Water heater services: repair, maintenance and replacement
- Gas tank vs. tankless vs. heat pump water heaters
- Well water problems in northwest Illinois
- Water filtration systems
- Service area by ZIP code
Current Corro-Protec offers
Ask GSHA about current Corro-Protec offers.
We did not find a Corro-Protec consumer promotion that we could confirm as current on both corroprotec.com and gshaservices.com, so none is advertised here. Corro-Protec’s product page does describe a 90-day money-back guarantee and a 20-year limited warranty; how that warranty works is explained in the warranty section below. Financing programs available through GSHA are on our financing page.
Last checked 2026-10-23. Offers and guarantees are set by the manufacturer and can change; we confirm what applies at your estimate.
How a Corro-Protec powered anode works
Almost every glass-lined steel storage water heater sold in North America leaves the factory with one or two anode rods. The anode is there because no glass lining is perfect: wherever water reaches bare steel, the tank starts to corrode. A conventional anode is made of magnesium or aluminum, metals that corrode more readily than steel, so the anode is consumed instead of the tank. That is why it is called sacrificial, and why it eventually runs out. Corro-Protec’s FAQ notes that water heater manufacturers often call for anode inspection every one to three years to keep the tank warranty in force.
A Corro-Protec rod works on a different principle, which Corro-Protec describes as impressed current cathodic protection. The rod is titanium coated with mixed metal oxide (MMO). A low-voltage DC power supply drives a small, controlled current from the rod through the water to the tank wall, which protects the exposed steel without consuming the rod. Corro-Protec lists the output of its regular rods at 0.005 A for the 10-39 gallon model and 0.015 A for the larger models.
- Nothing to wear away. Corro-Protec says the titanium rod does not degrade the way a magnesium or aluminum anode does.
- A status light. A green LED on the power supply shows that the system is running; Corro-Protec says the light goes out if there is a fault, so a quick look is all the checking it needs.
- Safe if the tank is drained. Corro-Protec says the rod turns itself off automatically when the tank is empty.
- Low running cost. Corro-Protec estimates that its best-selling rod uses about $2 to $3 of electricity per year.
- Certified components. Corro-Protec states that the regular rods are tested and certified by the Water Quality Association against NSF/ANSI/CAN 372 (lead-free), and that the power supply conforms to UL Std. 1310, is certified to CSA Std. C22.2 No. 223 and is ETL listed (Intertek 5003982). The product page lists Canada as the country of origin.
Corro-Protec also says its rod reduces sediment accumulation and can cut water heating energy costs by up to 10 percent a year, based on its internal testing and independent sources, with results that vary. We pass those claims on as the manufacturer’s; a powered anode is not a water softener and does not remove hardness minerals from your water.
Corro-Protec models GSHA installs
Corro-Protec sizes its residential rods by tank capacity and by where the anode sits. The two layouts matter: Corro-Protec warns never to install a dedicated-port model in a hot water outlet, or the warranty is void. GSHA identifies the layout before ordering. Part numbers and specifications below are from Corro-Protec’s product page.
Dedicated port, 10-39 gal
For smaller tanks with a separate anode port on top: point-of-use heaters and compact electric or gas tanks.
Part no. 96386
Specifications
- Tank size: 10-39 gallons
- Port: dedicated anode port
- Rod: titanium + mixed metal oxide, regular length
- Output: 0.005 A
- In the box: rod, power supply with 12-foot cord, installation guide
Specifications from corroprotec.com; GSHA confirms the model for your tank at the estimate.
Dedicated port, 40-89 gal
Corro-Protec’s standard model and the one most homes need: the typical 40 or 50 gallon gas or electric tank with an anode port on top.
Part no. 96387
Specifications
- Tank size: 40-89 gallons
- Port: dedicated anode port
- Rod: titanium + mixed metal oxide, regular length
- Output: 0.015 A
- In the box: rod, power supply with 12-foot cord, installation guide
Specifications from corroprotec.com; GSHA confirms the model for your tank at the estimate.
Dedicated port, 90-120 gal
An extra-large rod for big residential tanks. Because it is longer, it needs more headroom above the tank, which we measure before ordering.
Part no. 96388
Specifications
- Tank size: 90-120 gallons
- Port: dedicated anode port
- Rod: titanium + mixed metal oxide, X-Large, 19 inches long
- Output: 0.015 A
- In the box: rod, power supply with 12-foot cord, installation guide
Specifications from corroprotec.com; GSHA confirms the model for your tank at the estimate.
Hot water outlet, 10-120 gal
For tanks whose anode shares the hot water outlet, a layout Corro-Protec says fits most Bradford White heaters. Installed with the supplied stainless fittings.
Part no. 96383 (also 96382 for Buderus)
Specifications
- Tank size: 10-120 gallons (96383)
- Port: hot water outlet; fits most Bradford White
- Fittings: stainless steel 304 elbow, nipple and tee included
- Output: 0.015 A
- Buderus version (96382): 1-inch NPT thread with stainless fittings
Specifications from corroprotec.com; GSHA confirms the model for your tank at the estimate.
Corro-Protec also sells a 12-volt rod for RV water heaters; GSHA’s work is residential water heaters in homes.
Hot water that smells like rotten eggs
A sulfur or rotten-egg smell that shows up only at the hot taps is one of the most common reasons homeowners call us about anodes. Here is how the sources we rely on explain it, in their words rather than ours.
- Corro-Protec says the smell is usually caused by hydrogen sulfide gas, produced when sulfur-reducing bacteria react with sulfates in the water, sometimes together with a magnesium anode. It says its powered rod neutralizes those bacteria and that in most cases the smell disappears within 24 hours of installation.
- The Minnesota Department of Health, in its guidance for well owners, suggests smelling both hot and cold taps; if only the hot water smells, the problem is likely in the water heater. It explains that the anode is usually magnesium, which can supply electrons that help convert sulfate to hydrogen sulfide, that a replacement anode of a different material such as aluminum can be installed, and that removing the anode altogether may significantly shorten the life of the heater. It advises consulting a water heater dealer.
That last point is why we do not simply pull the anode out of a smelly tank. A powered anode keeps the tank protected while taking the sacrificial metal out of the picture. If the cold water smells too, the cause is in the water supply rather than the heater, and we will talk about testing and treatment instead; see our well water guide and filtration options.
Will a Corro-Protec rod fit my water heater?
Corro-Protec says its rods fit the vast majority of storage water heaters on the market, from 10 to 120 gallons, and lists electric, gas, solar, hybrid, geothermal and indirect water heaters as compatible. The exceptions are tankless heaters and stainless steel or plastic-lined tanks, which do not use an anode. At the estimate we check:
- Anode location. A hex head or plastic cap on top of the tank usually marks a dedicated anode port; on many Bradford White heaters the anode is part of the hot water outlet. Corro-Protec also offers a wye fitting for tanks where the anode shares the outlet location.
- Thread size. Corro-Protec’s standard thread is 3/4-inch NPT; certain Buderus models use 1-inch NPT.
- Headroom. The regular rod is about 12 inches tall, so it needs roughly a foot of clear space above the tank; the 90-120 gallon rod is 19 inches long.
- Power. The power supply comes with a 12-foot cord. If the nearest receptacle is out of reach, GSHA’s licensed electricians can install one, which may need its own permit depending on your municipality.
- Tank condition. A powered anode protects a tank; it cannot repair one that is already leaking. If the heater is near the end of its life, we will say so and price a replacement alongside the rod.
- Your water heater’s warranty. Corro-Protec states that a compatible, properly installed rod should not, by itself, void the water heater manufacturer’s warranty. We still recommend reading your heater’s warranty terms, and we install exactly per Corro-Protec’s guide.
Corro-Protec also says its rod can be used safely with any water treatment system, so a water softener or filter is not a reason to skip it.
The Corro-Protec warranty, in plain terms
Corro-Protec advertises a 20-year limited warranty. The written warranty on corroprotec.com is more specific, and it is worth knowing how it works before you buy:
- Base warranty, 5 years: covers the anode rod and the power supply against defects in materials and workmanship from the date of original purchase.
- Extended warranty, up to 20 years: covers the anode rod only. From year 6 through year 20, coverage is a prorated credit toward repair or replacement of the rod, starting at 70 percent in year 6 and stepping down to 5 percent.
- Registration: the extended warranty requires registration at corroprotec.com/warranty within 90 days of purchase. Not registering does not affect the base warranty.
- Single-family homes: extended coverage is limited to single-family residences; commercial and industrial use is excluded unless Corro-Protec authorizes it in writing.
- Conditions: the product must be properly installed in a compatible heater, continuously powered, properly grounded and used according to the installation guide. Exclusions include the wrong port, unauthorized resellers or power supplies, power surges, extreme water conditions and labor or water damage costs.
GSHA registers the rod with you after installation so the 90-day deadline is not missed, and gives you the serial number and invoice that a claim would require.
How GSHA installs a Corro-Protec rod
Corro-Protec describes the installation as about 15 minutes for a straightforward tank. In a real basement, the time goes into the parts around it: a seized anode, a tight ceiling, an outlet on the wrong wall. These are the steps GSHA follows.
- Identify the heater and layout. Brand, capacity, fuel and anode location, from the label and a look at the top of the tank, so the right part number is on the truck.
- Shut down safely. Gas valve or breaker off, cold supply closed, pressure relieved and enough water drained to work on the fitting.
- Remove the old anode. Corro-Protec specifies a 1-1/16 inch (27 mm) socket for removal; old anodes are often fused in place, and we have the tools to get them out without damaging the tank.
- Install the Corro-Protec rod. Sealed and tightened to Corro-Protec’s suggested torque of about 22 foot-pounds, or fitted with the supplied stainless tee on a hot-outlet heater.
- Power and verify. Refill and bleed the tank, check for leaks, restart the heater, plug in the power supply and confirm the green status light.
- Register and hand off. We register the warranty, show you the status light and leave the paperwork with you.
If we find a problem with the heater itself, such as a leaking tank, a faulty relief valve or a venting issue, we tell you before any rod goes in. Our water heater services page covers repair and replacement.
Water in the counties we serve
The water that fills your tank varies a great deal across our service area: Lake Michigan water along the lakefront and in most of DuPage and Cook, deep and shallow wells in McHenry, Boone and much of Will, and a river-and-well blend in Aurora. The figures below come from each utility’s most recent water quality report we could read. Hardness is listed only where the utility publishes it. A powered anode protects the tank in all of these waters; it does not change their hardness.
| County | Example utility and source | Disinfectant | Hardness published |
|---|---|---|---|
| McHenry | Crystal Lake: groundwater from shallow sand-and-gravel and deep sandstone wells | Chlorine | About 20-30 grains entering treatment; about 2-8 grains per gallon after the city’s ion exchange softening |
| Lake | Central Lake County JAWA: Lake Michigan, treated in Lake Bluff | Chlorine | Highland Park (Lake Michigan): 7.3-8.2 grains per gallon |
| Boone | Belvidere: five wells, four in deep sandstone | Chlorine | 19 to 28 grains (average) |
| Kane | Aurora: Fox River plus shallow and deep wells, lime-softened | Chloramines | 110-160 mg/L (6-10 grains per gallon) |
| DuPage | DuPage Water Commission: Lake Michigan water bought from Chicago | Chlorine | Elmhurst: about 144 mg/L, about 8 grains per gallon |
| Cook | Hanover Park: Lake Michigan water from Chicago via a joint action water agency | Chlorine | Not stated in Hanover Park’s report |
| Will | Joliet: 21 deep bedrock and 5 shallow gravel wells; Lake Michigan water planned from 2030 | Chloramines (per the report’s table) | Not stated; the report says Lake Michigan water will be lower in hardness |
One utility per county is shown as an example; your own utility’s report may differ. Each county page names its sources.
Find your county
GSHA installs Corro-Protec rods from two offices: Woodstock (McHenry County) and Lake Bluff (Lake County). Crews travel from those offices into Boone, Kane, DuPage, Cook and Will counties. Each county page covers the communities we serve there, the local water supply, permit notes and how to get an estimate. The ZIP-code list is the definitive coverage map.
- McHenry County, ILWoodstock office
- Lake County, ILLake Bluff office
- Boone County, ILserved from Woodstock
- Kane County, ILserved from Woodstock and Lake Bluff
- DuPage County, ILserved from Woodstock and Lake Bluff
- Cook County, ILserved from Woodstock and Lake Bluff
- Will County, ILserved from Woodstock and Lake Bluff
Questions and answers
Is GSHA an authorized Corro-Protec dealer?
Yes. GSHA Services, LTD is an authorized Corro-Protec dealer and installer. We supply genuine Corro-Protec rods and install them with our own crews. That matters because Corro-Protec’s warranty excludes products bought from unauthorized resellers.
What is the difference between a powered anode and a regular anode rod?
A regular anode is magnesium or aluminum and protects the tank by corroding in its place until it is used up. A Corro-Protec powered anode is a titanium rod coated with mixed metal oxide that protects the tank with a small current from a power supply, so, according to Corro-Protec, it is not consumed.
Will it get rid of the rotten-egg smell in my hot water?
If the smell is only in the hot water, the water heater is the likely source, and Corro-Protec says its rod eliminates the smell in most cases within 24 hours. If the cold water smells as well, the cause is in the water supply and needs a different fix, such as testing and treatment. We check both taps at the estimate.
Do I need a new water heater?
No. A Corro-Protec rod installs in your existing tank, provided the tank is a compatible storage type and is not already leaking. It does not fit tankless heaters or stainless steel or plastic-lined tanks.
Does it need electricity?
Yes. It runs from a low-voltage power supply with a 12-foot cord, and Corro-Protec estimates its best-selling rod uses about $2 to $3 of electricity a year. If there is no receptacle within reach, our licensed electricians can add one.
Will installing it void my water heater warranty?
Corro-Protec states that a compatible rod installed properly should not, by itself, void the water heater manufacturer’s warranty. Warranty terms vary by heater brand, so we suggest reviewing yours; we install exactly as Corro-Protec’s guide specifies.
How long is the warranty?
Corro-Protec’s written warranty gives 5 years on the rod and power supply, and an extended warranty of up to 20 years on the rod alone, prorated from year 6, if the product is registered within 90 days of purchase. GSHA registers it with you after installation.
Does it work with a water softener?
Corro-Protec says the rod can be used safely with any water treatment system. A powered anode does not soften water, so a softener and a powered anode do different jobs.
Do I need a permit to replace an anode rod?
It depends on the municipality. Some building departments treat it as maintenance; Chicago, for example, lists repairing or replacing an existing hot water heater as Express Permit plumbing work. GSHA checks with your building department and pulls any permit the job requires, including for a new receptacle. Each county page has details.
Are there any Corro-Protec offers right now?
Ask GSHA about current Corro-Protec offers. We only publish a promotion when we can confirm it is current on the manufacturer’s site and our own. Financing options are on our financing page.
Request a free Corro-Protec installation estimate
Tell us about your water heater: brand, size, fuel and roughly how old it is, plus whether the hot water smells. We will follow up to confirm the right Corro-Protec model and schedule a free, no-obligation visit.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
Fit check
A GSHA technician confirms the anode location, thread, headroom and power, and checks the condition of the heater.
Written quote
You receive an itemized quote for the rod, installation, any electrical work and warranty registration. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Corro-Protec dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install Corro-Protec powered anode rods and service water heaters across the northern and western Chicago suburbs; see the full service area by ZIP code. GSHA Services is an independent dealer, not Corro-Protec; product warranties are provided by the manufacturer. Contact us · Financing · All products and brands
Sources
- Corro-Protec Powered Anode Rod for Water Heaters (product page: part numbers, specifications, certifications, guarantee) — https://www.corroprotec.com/product/water-heater-anode-rod/ (accessed 2026-10-23)
- Corro-Protec FAQ (how it works, odor, compatibility, installation, LED, water treatment) — https://www.corroprotec.com/faq/ (accessed 2026-10-23)
- Corro-Protec Limited Warranty — https://www.corroprotec.com/corro-protec-limited-warranty/ (accessed 2026-10-23)
- Minnesota Department of Health, Hydrogen Sulfide in Well Water — https://www.health.mn.gov/communities/environment/water/wells/waterquality/hydrosulfide.html (accessed 2026-10-23)
- City of Crystal Lake, 2025 Annual Water Quality Report — https://www.crystallake.org/home/showpublisheddocument/25220/639143636150430000 (accessed 2026-10-23)
- Village of Round Lake Beach, 2025 Water Quality Report (CLCJAWA Lake Michigan supply) — https://cms2.revize.com/revize/roundlakebeach/Round%20Lake%20Beach%20CCR%202025.pdf (accessed 2026-10-23)
- City of Highland Park, Water Hardness Information — https://www.cityhpil.com/government/city_departments/public_works/water_treatment_plant/hardness_information.php (accessed 2026-10-23)
- City of Belvidere, 2025 Water Quality Report — https://www.belvidereil.gov/wp-content/uploads/2026/07/Water-Quality-Report-2025-2.pdf (accessed 2026-10-23)
- City of Aurora, 2025 Water Quality Report (Spanish-language edition) — https://www.aurora.il.us/files/sharedassets/mainsite/v/2/watersewer/documents/water-quality-reports/2025-water-quality-report-spanish-final.pdf (accessed 2026-10-23)
- DuPage Water Commission, 2025 CCR Report — https://dpwc.org/wp-content/uploads/2026/03/2025-DuPage-Water-Commission-CCR-Report.pdf (accessed 2026-10-23)
- City of Elmhurst, Water Quality Report 2025 — https://cms3.revize.com/revize/elmhurst/Document%20Center/Services/Public%20Works/Utility%20Division/Water%20Quality%20Report%202025%20FINAL%20.pdf (accessed 2026-10-23)
- Village of Hanover Park, 2025 Water Quality Report — https://www.hpil.org/327/Water-Quality-Report (accessed 2026-10-23)
- City of Joliet, 2024 Drinking Water Quality Report — https://www.joliet.gov/home/showpublisheddocument/36625/639026112238500000 (accessed 2026-10-23)
- City of Chicago Department of Buildings, Express Permit: Plumbing Work — https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/instructions/EPP/PLUMB.html (accessed 2026-10-23)
- GSHA Corro-Protec overview page — https://gshaservices.com/corro-protec/ (accessed 2026-10-23)
- GSHA Services service-area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA Services financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
