Authorized Navien dealer · Will County, IL
Authorized Navien Dealer Serving Will County, IL
GSHA Services, LTD is an authorized Navien dealer and installer serving Will County homeowners from Joliet and Plainfield to New Lenox, Bolingbrook and Romeoville. We have no office in Will County: estimators, installation crews and our own licensed electricians are dispatched from our Woodstock office in McHenry County and our Lake Bluff office in Lake County. On a Navien job we size the unit, install the tankless water heater, combi-boiler or boiler, handle the gas piping, PVC venting, condensate and electrical work, pull the municipal permit, start up the unit and walk you through it. GSHA installs and services other water heater brands too, so a Navien recommendation is a fit for your house, not the only thing we sell.
Will County has the newest housing of any county we serve. The median home was built in 1992, only about 37 percent of homes predate 1980, and about 7 percent predate 1940 (Census Bureau ACS 2020-2024). Gas is nearly universal: 87.9 percent of occupied homes heat with utility gas, 2.0 percent with bottled or LP gas and 9.3 percent with electricity, and Nicor Gas serves the Will County communities we checked. That makes the typical Navien project here a tank-to-tankless replacement in a 1990s or 2000s home, often a larger house where hot-water demand drives the model choice.

Communities we serve in Will County
GSHA’s published service-area ZIP list includes these Will County communities: Joliet, the county seat, whose city limits also reach into Kendall County; New Lenox, Crest Hill and Romeoville, which lie entirely within Will County; Plainfield, partly in Kendall County; Bolingbrook, shared with DuPage County; and Channahon, which extends into Grundy County. Four more listed communities sit mostly outside Will County but include Will County neighborhoods: Naperville (mostly DuPage County), Aurora (mostly DuPage, Kane and Kendall counties), Lemont (mostly Cook County, also DuPage) and Tinley Park (mostly Cook County). In a cross-county town the building department depends on which side of the line your house sits on, and GSHA sorts that out during the estimate.
Crete is not on the published ZIP list, although GSHA crews have recently worked there; if you live in Crete or elsewhere in southern Will County, please confirm your address at (224) 220-3660 or through the estimate form before scheduling. The complete ZIP-code list is on the GSHA service area page.
Navien equipment guidance for Will County homes
The 1990s and 2000s house. With a 1992 median build year, most Will County homes we see have a gas furnace and a 40- or 50-gallon gas water heater in the basement or utility room, installed by the builder and now on their first or second replacement. That is the classic Navien tank-to-tankless job: the tank comes out, a wall-hung NPE-2 goes up, and the vent changes from the tank’s metal connector to the Navien’s PVC pipe, with a condensate drain and neutralizer. New Lenox’s permit guide asks for exactly that kind of change to be spelled out: the application must say whether the unit is a direct replacement or a high-efficiency upgrade, and any modification to the venting system, such as changing from a conventional draft-hood vent to direct vent, must be submitted with it.
Sizing for larger homes. Will County’s owner-occupied, three- and four-bedroom houses often have three full baths, and simultaneous demand is the real sizing question. Navien rates the NPE-240A2 at 5.6 GPM and the NPE-240S2 at 5.8 GPM at a 67°F rise, the 210 sizes at 5.1 to 5.3 GPM and the 180 sizes at 4.3 GPM. Where one unit is not enough, for example a large home with body sprays or a big soaking tub, Navien’s Ready-Link cascading lets two or more NPE-2 units work together, with the next unit firing as the first reaches about 80 percent of capacity. GSHA counts fixtures and checks the gas supply before recommending one unit or two.
A or S2. In a two-story with the primary suite at the far end of the house, the NPE-A2’s built-in ComfortFlow buffer tank and recirculation pump shorten the wait for hot water; with a NaviCirc valve at the farthest fixture it can recirculate through the existing hot and cold lines. In a ranch or compact layout, an NPE-S2 at up to 0.96 UEF is simpler. Navien’s residential warranty on both (1 year labor, 5 years parts, 15 years on the heat exchanger) assumes standard or controlled recirculation, so GSHA sets a recirculation schedule through the unit or NaviLink rather than running a pump nonstop.
Boilers where they exist. Hydronic heat is less common in Will County’s newer housing, but older parts of Joliet, Lockport and Lemont and some custom homes with in-floor radiant heat have boilers. A Navien NCB-H combi-boiler (95% AFUE, up to 150,000 BTU/h heating and 5.4 GPM of hot water at a 70°F rise) suits a home where one unit can handle both; an NHB-H heating boiler with built-in control of three zone pumps or valves suits a radiant floor system with a separate water heater. Radiant floors run at low water temperatures, which is where a condensing boiler is most efficient, and Nicor Gas’s 2026 combination-boiler measure requires a programmed outdoor reset control.
Forced-air homes and controls. Most Will County homes have ductwork, and the Navien NPF hydro-furnace (97% AFUE, 15 to 100% modulation, variable-speed ECM blower, dual-fuel compatible with an AHRI-matched heat pump) is an option alongside conventional furnaces. NaviLink or NaviLink Lite adds phone control, usage data and diagnostic notifications on any Navien unit, which is useful when the service office is a drive away.
Permits, utilities and installation considerations
In Will County the contractor pulls the permit and the municipality inspects the work; GSHA handles the application, specification sheets, contractor registration and inspections. Here is what the municipalities we checked publish for water heaters and related work.
- Village of New Lenox. The Miscellaneous Permits Guide lists water heaters, furnaces, air conditioning units and garage heating units among the projects that require a permit. The submittal is the Miscellaneous Permit form, the manufacturer’s specifications for the water heater, and a note saying whether it is a direct replacement or a high-efficiency upgrade; any venting modification must be submitted with the application. The specifications must be on site for the final inspection, and an emergency installation still requires the application to be filed the next business day. Contractors must register with the village; Building Department (815) 462-6490.
- City of Lockport. The building permit FAQ describes an Over the Counter Permit that includes HVAC and water heaters, reviewed quickly without building plans or plats, and lists water heaters among the work that requires a permit; contractors register with the Building Department first (Building Services, (815) 838-0549).
- City of Joliet. The contractor, not the homeowner, must pull the permit, and Joliet requires contractor registration, a certificate of insurance and a per-project letter of intent; permits are not issued over the counter (residential permit information). GSHA confirms the current water heater form with the Building & Inspectional Services Division, (815) 724-4070.
- Village of Plainfield. Permits go through the Permitting & Licensing Portal, and the building codes page lists the adopted plumbing, mechanical, fuel gas and electrical codes; GSHA confirms the water heater submittal with the Building Department, (815) 439-2937.
- Unincorporated Will County. The Land Use Department Building Section permits through its SmartGov portal. Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment and electrical installations, with an emergency-repair exception if the permit is applied for the next business day, and every contractor must be registered with the county.
- Other municipalities (Bolingbrook, Romeoville, Crest Hill, Channahon, Naperville, Aurora, Lemont, Tinley Park) have their own building departments; GSHA confirms the requirement for your address before scheduling.
Venting in newer homes. Navien condensing units vent through PVC (2-inch PVC up to 75 feet for the NPE-2 series), so a basement water heater usually vents out the rim joist or up through an unused chase. In newer subdivisions with tight side yards, we place the termination to keep clearances from windows, doors, the gas meter and the neighboring house. If the old water heater shared a metal B-vent with the furnace, the furnace’s vent is checked once it is alone; a furnace that is already condensing has its own PVC vent and is unaffected. Condensate is neutralized before it reaches a floor drain or condensate pump.
Gas supply. A Navien NPE-240 fires at up to 199,900 BTU/h, and two cascaded units double that. Navien lists 1/2-inch gas piping up to 24 feet for the NPE-2 series, but the meter and the furnace, range, dryer and any fireplace on the same line decide what the system can supply; meter-capacity questions go to Nicor Gas, and GSHA sizes and runs the piping and installs a new gas valve.
Utilities and rebates. Nicor Gas’s service territory names Will County communities including Aurora, Bolingbrook, Channahon, Crest Hill, Frankfort, Crete and Joliet, and New Lenox, Lockport and Plainfield name Nicor Gas on their own resident pages; a ZIP lookup on nicorgas.com is the definitive check. ComEd delivers electricity across most of the county, while most of Naperville, including its Will County portion, is served by the city’s own electric utility; neither affects a gas water heater rebate. Nicor Gas’s 2026 residential rebates include boilers at 95% AFUE and up and a combination-boiler measure requiring 95% AFUE, sealed combustion, modulation and a programmed outdoor reset control; every Navien NCB-H, NFC-H, NHB-H and NFB-H is rated 95% AFUE. Nicor’s tankless measure is limited to residential units of 75 MBTUH or less, so the Navien NPE-2 line does not qualify for that measure. Equipment must be professionally installed during 2026 and claimed within 90 days or by January 31, 2027. Check current eligibility with Nicor Gas.
What GSHA handles. Removal of the old water heater, gas piping and a new gas valve, isolation service valves for future flushing, the relief valve and thermal expansion tank, PVC venting and the condensate neutralizer, recirculation setup, the electrical connection by our own licensed electricians, the permit, the inspection, start-up and a walkthrough of the EZNav controls.
Recent GSHA work in Will County
GSHA crews have recently worked in Joliet, Romeoville, Crest Hill, Channahon and Frankfort, and in Crete in the southern part of the county, where we ask homeowners to confirm coverage for their address before booking.
Navien products we install in Will County
The same Navien lineup is available county-wide. Featured models, ratings and published installed prices are on the main Navien dealer page.

NPE-A2 tankless
Built-in ComfortFlow recirculation; cascade-capable with Ready-Link.
Featured: NPE-240A2, NPE-210A2, NPE-180A2
Explore Navien tankless
NPE-S2 tankless
Standard condensing tankless, up to 0.96 UEF.
Featured: NPE-240S2, NPE-210S2, NPE-180S2, NPE-150S2
Compare NPE-S2 models
NCB-H combi-boilers
Heat and hot water in one 95% AFUE wall-hung unit.
Featured: NCB-190/060H to NCB-250/150H
Explore combi-boilersNFC-H combi-boilers
Fire-tube combis for larger homes, up to 199,900 BTU/h heating.
Featured: NFC-250/175H, NFC-250/200H
Explore NFC-H
NHB-H boilers
Heating-only condensing boilers for radiant and baseboard systems.
Featured: NHB-55H, NHB-80H, NHB-110H, NHB-150H
Explore Navien boilersNFB-H boilers
Fire-tube heating boilers, 175,000 and 199,900 BTU/h.
Featured: NFB-175H, NFB-200H
Explore NFB-HNPF hydro-furnaces
97% AFUE forced-air heat for ducted homes.
Featured: NPF700 series
Explore hydro-furnacesNaviLink, NaviCirc, PeakFlow
Phone control, recirculation and scale prevention.
Featured: NaviLink, NaviCirc, PeakFlow
See accessoriesCurrent Navien offers
Ask GSHA about current Navien offers.
Each Navien offer names its own models and dates; tell us when you plan to install and we will say which applies. Financing through Synchrony and Service Finance is on our financing page.
Utility rebates run separately; check current eligibility with Nicor Gas.
Questions and answers
Do you serve my Will County address?
Yes, if you are in a listed ZIP: Joliet, New Lenox, Crest Hill, Romeoville, Plainfield, Bolingbrook or Channahon, or the Will County parts of Naperville, Aurora, Lemont and Tinley Park. Crete and other southern Will County addresses should call (224) 220-3660 to confirm first.
Does New Lenox require a permit to replace a water heater?
Yes. New Lenox lists water heaters among the projects that require a permit, with the manufacturer’s specifications and a note on whether the unit is a direct replacement or a high-efficiency upgrade; any change to the venting must be included. An emergency replacement still needs the application filed the next business day.
Is a water heater an over-the-counter permit in Lockport?
Yes. Lockport’s building permit FAQ lists HVAC and water heaters as Over the Counter Permits that are reviewed quickly without building plans or plats.
Is one tankless enough for a large house?
Often one NPE-240 is enough: Navien rates the NPE-240A2 at 5.6 GPM and the NPE-240S2 at 5.8 GPM at a 67°F rise. If your household routinely runs more than that at once, Navien’s Ready-Link cascading lets two units share the load. GSHA counts fixtures and checks the gas supply before recommending either.
Will my gas line need to be replaced?
Sometimes. Navien lists 1/2-inch gas piping up to 24 feet for the NPE-2 series, but the meter and the other gas appliances decide. GSHA checks the whole system at the estimate and includes any piping or valve changes in the written quote.
Does a Navien unit qualify for a Nicor Gas rebate?
Navien boilers and combi-boilers are rated 95% AFUE, matching Nicor’s 2026 boiler and combination-boiler measures (outdoor reset required for the combination measure). Nicor’s tankless measure is limited to units of 75 MBTUH or less, so NPE-2 tankless units do not qualify for it. Check current eligibility with Nicor Gas.
How do you handle service from Woodstock and Lake Bluff?
Call (224) 220-3660 and we schedule a technician. If NaviLink is installed, you can give GSHA installer access so we can see the unit’s status and error codes before the visit.
Do you service Navien units installed by others?
Yes. GSHA repairs and maintains Navien tankless water heaters, combi-boilers and boilers from any installer, including discontinued first-generation NPE units.
More Navien pages
Navien Authorized Dealer in Illinois (main page) · Navien tankless water heaters: prices and installation · Navien boilers and combi-boilers prices · Boiler installation · Water heater services
Other counties
Request a free Navien installation estimate
Tell us about your home and the equipment you are considering in Will County. We will follow up to schedule a free, no-obligation in-home visit, size the unit, check the existing gas, venting, condensate, water and electrical, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA comfort advisor checks the existing water heater or boiler and explains the Navien options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Navien dealer and installer (listed on Navien’s Installer/Service Locator). Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Navien equipment across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Will County (05000US17197) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17197 (accessed 2026-10-23)
- Navien Installer/Service Locator — https://www.navieninc.com/installers (accessed 2026-10-23)
- Navien NPE-A2 Series (Ready-Link cascading, venting and gas piping) — https://www.navieninc.com/series/npe-a2 (accessed 2026-10-23)
- Navien NPE-S2 Series — https://www.navieninc.com/series/npe-s2 (accessed 2026-10-23)
- Navien NPE-A2 warranty — https://www.navieninc.com/series/npe-a2/warranty (accessed 2026-10-23)
- Navien NCB-H Series — https://www.navieninc.com/series/ncb-h (accessed 2026-10-23)
- Navien NHB-H Series — https://www.navieninc.com/series/nhb-h (accessed 2026-10-23)
- Navien NFC-H Series — https://www.navieninc.com/series/nfc-h (accessed 2026-10-23)
- Navien NFB-H Series — https://www.navieninc.com/series/nfb-h (accessed 2026-10-23)
- Navien NPF Series — https://www.navieninc.com/series/npf (accessed 2026-10-23)
- Navien NaviLink — https://www.navieninc.com/accessories/navilink (accessed 2026-10-23)
- Village of New Lenox – Miscellaneous Permits Guide (water heaters) — https://www.newlenox.net/DocumentCenter/View/113 (accessed 2026-10-23)
- Village of New Lenox – contractor registration FAQ — https://www.newlenox.net/m/faq?cat=16 (accessed 2026-09-16)
- City of Lockport – building permit FAQ (Over the Counter Permits: HVAC, water heaters) — https://www.cityoflockport.net/Faq.aspx?QID=68 (accessed 2026-10-23)
- City of Lockport – Building Services — https://cityoflockport.net/133/Building (accessed 2026-09-16)
- City of Joliet – building permit forms — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-permit-forms (accessed 2026-09-16, via GSHA Lennox Will County page)
- City of Joliet – residential permit information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/residential-building-permit-information (accessed 2026-09-16)
- Village of Plainfield – Building and Code Enforcement — https://www.plainfieldil.gov/departments/building-and-code-enforcement (accessed 2026-09-16)
- Village of Plainfield – Building Codes — https://www.plainfieldil.gov/departments/building-and-code-enforcement/building-codes (accessed 2026-09-16)
- Will County Land Use Department – Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-10-23)
- Will County Building Ordinance Sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-09-16, via GSHA Lennox Will County page)
- Will County contractor registration — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (accessed 2026-09-16)
- Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
- Nicor Gas – Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-10-23)
- City of Naperville Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
