Authorized Briggs & Stratton Dealer · Cook County, IL
Briggs & Stratton Generators in Cook County, IL
GSHA Services, LTD installs and services Briggs & Stratton home standby generators across most of Cook County from our Lake Bluff office at 11 N Skokie Hwy. We have no office inside Cook County, but most of it is close: the nearest north-suburban villages are about 10 straight-line miles from Lake Bluff, Chicago’s North Side about 23 and the Loop about 30, while the south and southwest suburbs are roughly 40 to 45 miles out. A few communities on the county’s northwest edge, such as Elgin’s Cook County side, are nearer our Woodstock headquarters. As an authorized Briggs & Stratton dealer and installer we do the whole job with our own crews and our own licensed electricians.
Cook County is different from the rest of our territory in three ways. It has three gas utilities, so the company we coordinate a meter upgrade with depends on your address. Its housing is older and denser than anywhere else we work: 27.9 percent of houses date from 1939 or earlier and more than half of all housing units are in multi-unit buildings. And many communities have combined sewers, where rainwater and sewage share pipes and basement backups are a known risk, which puts the sump pump at the top of every generator load list.

Communities we serve in Cook County
The table lists the twelve most populous municipalities wholly or partly in Cook County, with 2020 Census populations, approximate straight-line distance from the nearer GSHA office and the detail that most affects a generator installation there. Cicero and Berwyn distances are estimated from neighboring Oak Park.
| City or village | Population (2020 Census) | Distance from nearer office | Generator note |
|---|---|---|---|
| Chicago | 2,746,388 | 29.9 mi to the Loop (Lake Bluff); North Side about 23 | Peoples Gas (Nicor in some annexed areas); City of Chicago issues permits, not the county |
| Elgin | 114,797 | 21.1 mi (Woodstock) | Also in Kane County; separate sewer system per MWRD |
| Cicero | 85,268 | about 29 mi (Lake Bluff) | Combined sewer system per MWRD |
| Schaumburg | 78,723 | 20.8 mi (Lake Bluff) | Also partly in DuPage County |
| Evanston | 78,110 | 18.1 mi (Lake Bluff) | Nicor Gas; combined sewer system per MWRD |
| Arlington Heights | 77,676 | 14.8 mi (Lake Bluff) | Nicor Gas; combined and separate sewers |
| Palatine | 67,908 | 15 mi (Lake Bluff) | Also partly in Lake County |
| Skokie | 67,824 | 17.9 mi (Lake Bluff) | Cook County Building and Zoning keeps a satellite office here |
| Des Plaines | 60,675 | 17.1 mi (Lake Bluff) | Combined and separate sewers |
| Orland Park | 58,703 | 44.8 mi (Lake Bluff) | Inside our 50-mile radius; small part in Will County |
| Oak Lawn | 58,362 | 39.5 mi (Lake Bluff) | Inside our 50-mile radius |
| Berwyn | 57,250 | about 30 mi (Lake Bluff) | Combined sewer system per MWRD |
Distances are approximate straight-line miles as measured for GSHA’s Cook County generator page. Tinley Park, at about 48.9 miles, is the farthest suburb we measured; communities beyond 50 miles of both offices are quoted case by case. See our service area page.
Briggs & Stratton generator guidance for Cook County homes
Combined sewers make the sump pump non-negotiable. The Metropolitan Water Reclamation District’s Cook County Flood Response Resource Guide (December 2025) explains that the region’s flat landscape makes it prone to flooding, that many communities have combined sewers in which sewage and rainwater share pipes, and that basement backups happen when rain enters neighborhood sewers faster than it can drain. It lists a malfunctioning sump pump among the sources of water in a home and notes that most homeowner’s insurance policies do not cover flooding. A sump pump only protects the basement while it has power, so it is the first circuit on every Cook County estimate. A Briggs & Stratton PowerProtect DX 13kW, rated 13 kW on propane and 11.5 kW on natural gas with 37 kVA of motor-starting capability, carries the sump pump, furnace, refrigerator and lights.
Old houses, old services. With 27.9 percent of Cook County houses built in 1939 or earlier and only 4.4 percent since 2010 (2019-2023 American Community Survey), many homes still have original or partly updated electrical service. Briggs & Stratton makes a 100-amp transfer switch for older homes with 100-amp service, plus 150, 200 and dual 200/400-amp versions. Our electricians look at the meter socket, main panel and grounding before recommending a switch, and if a panel change is needed we say so at the estimate, not on install day.
Tight lots. Only 45.3 percent of the county’s housing units are single-family houses, and many sit on close-set lots. The DX 13kW’s upright cabinet is 28.5 by 25.5 inches, which Briggs & Stratton describes as a 39% smaller footprint than other leading generators; the 18 to 26kW models measure about 46 by 27 inches. All DX models are approved for installation as close as 18 inches to a building when NFPA 37 is followed and the home has working carbon monoxide detectors, and the county’s generator permit asks for the distance from every lot line on the site plan, so we measure before we recommend a model.
Gas-heated homes and natural-gas output. Gas heats 82.2 percent of occupied homes in the county, so most houses already have a gas service line to tie into. The PowerProtect+ DX 18kW and both 22kW models produce their full rating on natural gas, which makes them the usual whole-house choice for a gas-heated home with one central air conditioner; Briggs & Stratton says every PowerProtect+ model is engineered to start a 5-ton air conditioner.
Larger suburban homes. In Arlington Heights, Palatine, Schaumburg and Orland Park, newer and larger homes often have two air conditioners. A 26kW model with Briggs & Stratton’s Symphony Choice Low Voltage Dual Module manages both systems; the DX 26kW publishes 65.5 kVA of motor-starting capability, the highest in the family.
Permits, utilities and installation considerations
Who issues the permit
Only about 2.4 percent of Cook County residents live in unincorporated areas, according to the Civic Federation, most of them in Bremen, Lemont, Leyden, Northfield, Maine and Orland townships. For those addresses, the Cook County Department of Building and Zoning issues the permit: “Generator” is one of the permit types it accepts online, its e-permits page lists a $100 deposit, and it enforces the 2014 Cook County Electrical Code and, for drawings submitted after December 1, 2021, the 2021 International Residential Code with county amendments. The county’s generator permit sheet asks for a plat of survey sealed by an Illinois surveyor and not more than five years old, a site plan showing the unit’s distance from every lot line, a single-line diagram of the meter, main panel and transfer switch, cut sheets for the generator and switch, and letters of intent from an electrical contractor registered with the department and from a registered plumbing contractor. Its FAQ adds that references to the National Electrical Code must be removed from drawings and that electrical inspections are scheduled with the township’s field inspector. The sheet dates from 2015 and shows a different deposit formula from the current e-permits page, so we confirm fees when we apply.
Everyone else deals with their own city or village. The county’s e-permits page states it cannot process permits for the City of Chicago or for properties inside incorporated suburbs. GSHA prepares the drawings, pulls the electrical and gas permits from whichever authority applies, and meets the inspectors; most installations take one to two days on site once the permit is issued.
Gas: Nicor, Peoples Gas or North Shore Gas
Nicor Gas serves most suburban communities; its county service list names every suburb in our table and “Chicago (Annexed Areas)”. Peoples Gas states it delivers natural gas to more than 898,000 customers in the city of Chicago. North Shore Gas serves nearly 166,000 customers in 54 communities between Winnetka and the Wisconsin border, and Nicor’s list also names some of those north-shore villages, so there the utility depends on the address; we confirm it from your gas bill or meter tag. Briggs & Stratton publishes half-load natural-gas use of 194,000 BTU/hr for the 22kW models and 206,000 BTU/hr for the 26kW models, and full-load demand is higher. Our gas technicians check whether the existing meter and regulator can carry the generator plus the furnace, water heater and range, and coordinate any upgrade with the right utility.
Electric: ComEd
ComEd is the electric provider across Cook County, including Chicago. The Briggs & Stratton transfer switch is installed between ComEd’s meter and your panel: when utility power is interrupted it starts the generator and moves the house onto it, isolating your wiring from ComEd’s lines, and it transfers back automatically when service returns.
Wells and septic
Private wells and septic systems exist in parts of the county. The Cook County Department of Public Health reviews private sewage disposal systems throughout the county except in incorporated Barrington Hills, Inverness, Palos Park and South Barrington, which have their own septic ordinances. The county’s generator application asks whether the property is on well and septic or on water and sewer; on a well, the pump goes on the load list and affects the model we recommend.
Cold-weather starts
Briggs & Stratton’s cold weather kits add a battery warmer and two oil heaters that switch on by thermostat as temperatures drop; we recommend them for every Cook County installation.
Briggs & Stratton products we install in Cook County
The same lineup is available county-wide. Full specifications are on the main Briggs & Stratton page.

PowerProtect DX 13kW
Sump pump and essentials on a tight city or inner-suburb lot.
Explore the DX 13kW
PowerProtect+ DX 18kW
Full 18 kW on natural gas; engineered to start a 5-ton air conditioner.
Explore the 18kW
22kW DX and PowerProtect+ DX
Whole-house coverage for gas-heated homes with one central air conditioner.
Explore the 22kW models
26kW DX and PowerProtect+ DX
Larger suburban homes with two ACs or an electric range.
Explore the 26kW modelsAutomatic Transfer Switches
100-amp switches for older homes up to dual 200/400 amps for large ones.
About transfer switchesSymphony Choice
Manages two AC systems, a range or electric heat.
About Symphony ChoiceEnergyTrak Monitoring
Know the sump pump has power while you are away; built into PowerProtect+ models.
About EnergyTrakService & Repair
Maintenance and repair for current and older Briggs & Stratton units.
Explore repairCurrent Briggs & Stratton offers
Ask GSHA about current Briggs & Stratton offers.
We confirm at the estimate which offer, if any, applies to your generator and purchase date. Financing through Synchrony and Service Finance is on our financing page.
Questions and answers
Do you install inside the city of Chicago?
Yes. The Loop is about 30 straight-line miles from our Lake Bluff office and the North Side about 23. Inside Chicago the gas utility is Peoples Gas (Nicor serves some annexed areas) and the City of Chicago, not the county, issues the permit; we handle both.
What does Cook County require for a generator permit in unincorporated areas?
A sealed plat of survey no more than five years old, a site plan with lot-line distances, a single-line diagram, equipment cut sheets and letters of intent from registered electrical and plumbing contractors, filed online with a deposit currently listed at $100. GSHA prepares the package and confirms fees when applying.
Which gas utility will you coordinate with?
Nicor Gas in most suburbs, Peoples Gas in Chicago, and North Shore Gas or Nicor on the north shore depending on the address. We confirm from your bill and arrange any meter upgrade with that utility.
My house is from the 1920s. Can it take a standby generator?
Usually. We check the service, meter socket and panel first; Briggs & Stratton’s 100-amp transfer switch suits older 100-amp services, and if the service itself needs an upgrade we quote it up front.
Why is the sump pump always first?
Because combined sewers and flat terrain make basement water a real risk in much of the county, according to MWRD, and a sump pump stops when the power does.
Is Orland Park inside your service area?
Yes. Orland Park is about 44.8 straight-line miles from Lake Bluff and Oak Lawn about 39.5, both inside our 50-mile radius. Communities beyond 50 miles of both offices are quoted case by case.
Do you repair older Briggs & Stratton generators?
Yes, including Fortress-series units. See our repair page and fault code guide.
Are there Briggs & Stratton offers in Cook County?
Ask GSHA about current Briggs & Stratton offers; we confirm what applies at the estimate.
More Briggs & Stratton pages
Briggs & Stratton Authorized Dealer in Illinois (main page) · PowerProtect DX generators · Briggs & Stratton repair · Generator error codes · Generator installation
Other counties
Request a free Briggs & Stratton installation estimate
Tell us about your home and the generator you are considering in Cook County. We will follow up to schedule a free, no-obligation in-home visit, count the loads you want covered, check the electrical service, gas meter and placement, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA advisor checks the panel, gas meter and lot and explains the Briggs & Stratton options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing, water treatment and generator contractor and an authorized Briggs & Stratton dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Briggs & Stratton generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Briggs & Stratton residential standby generator lineup and DX / PowerProtect+ DX product pages — https://energy.briggsandstratton.com/en-us/products/residential-standby-generators (accessed 2026-10-23)
- PowerProtect DX 13kW product page — https://energy.briggsandstratton.com/en-us/products/powerprotect-dx-13kw-home-standby-generator (accessed 2026-10-23)
- Briggs & Stratton transfer switches and cold weather accessories — https://energy.briggsandstratton.com/en-us/residential/products/standby-generators/transfer-switches-and-accessories (accessed 2026-10-23)
- GSHA KOHLER Generator Installation in Cook County (GSHA-verified county facts and distances) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/kohler-generators-installation-cook-county/ (accessed 2026-10-23)
- Cook County, Illinois (Wikipedia, 2020 Census places table) — https://en.wikipedia.org/wiki/Cook_County,_Illinois (verified by GSHA 2026-09)
- U.S. Census Bureau ACS 2019-2023 Narrative Profile, Cook County — https://www.census.gov/acs/www/data/data-tables-and-tools/narrative-profiles/2023/report.php?geotype=county&state=17&county=031 (verified by GSHA 2026-09)
- U.S. Census Bureau QuickFacts, Cook County — https://www.census.gov/quickfacts/fact/table/cookcountyillinois/PST045224 (verified by GSHA 2026-09)
- Nicor Gas, Where We Are — https://www.nicorgas.com/company/where-we-are.html (verified by GSHA 2026-09)
- Peoples Gas service area — https://www.peoplesgasdelivery.com/company/area (verified by GSHA 2026-09)
- North Shore Gas, About — https://www.northshoregasdelivery.com/company/about (verified by GSHA 2026-09)
- Commonwealth Edison (Wikipedia) — https://en.wikipedia.org/wiki/Commonwealth_Edison (verified by GSHA 2026-09)
- Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (verified by GSHA 2026-09)
- Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (verified by GSHA 2026-09)
- Cook County Generator Installation Permit Requirements (rev. 2015) — http://www.cookcountyil.gov/sites/g/files/ywwepo161/files/service/generatorinstallationrequirements.pdf (verified by GSHA 2026-09)
- Cook County Building and Zoning FAQ — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/faq-building_and_zoning.pdf (verified by GSHA 2026-09)
- Civic Federation, Unincorporated Areas of Cook County — https://www.civicfed.org/sites/default/files/REPORT_UnincorporatedAreasofCookCounty.pdf (verified by GSHA 2026-09)
- Cook County Department of Public Health, Septic Systems — https://cookcountypublichealth.org/environmental-health/water-and-sewage/septic/ (verified by GSHA 2026-09)
- MWRD Cook County Flood Response Resource Guide (12/15/2025) — https://www.mwrd.org/sites/default/files/2025-12/Flood_Resource_Guide_251215.pdf (verified by GSHA 2026-09)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
