Authorized Generac Dealer · Will County, IL
Authorized Generac Dealer Serving Will County, IL
Will County, Illinois’s fourth most populous county with 696,355 residents at the 2020 Census across 849 square miles, is served from GSHA’s office at 11 N Skokie Hwy, Lake Bluff, IL 60044. Lake Bluff is the nearer of our two offices for every community on this page. Straight-line distances run from about 42 miles for Bolingbrook to about 56 for Shorewood; five of the eleven towns in our table are inside our standard 50-mile radius, and Joliet and the others in the 52-to-56-mile band are quoted case by case rather than turned away. As an authorized Generac dealer and installer, we send our own crews and licensed electricians and handle the permit, inspections and start-up.
Will County has the newest housing in our territory: the median home was built in 1992, and about 88 percent of the county’s roughly 244,300 occupied homes heat with utility gas, with only about 9 percent on electric heat (U.S. Census Bureau, 2020-2024 American Community Survey). That means larger homes with 200 A services and central air are common, which suits whole-house Generac systems, and the county’s building ordinance requires basements to drain to a sump pump, which makes backup power for that pump a practical necessity.

Communities we serve in Will County
The table lists eleven of the largest municipalities wholly or mainly in Will County, with 2020 Census populations (for the whole municipality where it crosses a county line) and straight-line miles from our Lake Bluff office.
| Community | Population (2020) | Straight-line miles from Lake Bluff | Note |
|---|---|---|---|
| Joliet | 150,362 | 53.5 | Includes the Kendall County part; quoted case by case |
| Bolingbrook | 73,922 | 41.7 | Includes the DuPage County part; closest town in the table |
| Plainfield | 44,762 | 48.8 | Includes the Kendall County part |
| Romeoville | 39,863 | 45.4 | Wholly in Will County |
| New Lenox | 27,214 | 53.3 | Quoted case by case |
| Lockport | 26,094 | 48.8 | Wholly in Will County |
| Homer Glen | 24,543 | 47.1 | Includes the Cook County part |
| Crest Hill | 20,459 | 51.8 | Quoted case by case |
| Frankfort | 20,296 | 54.1 | Includes the Cook County part; quoted case by case |
| Mokena | 19,887 | 52.1 | Quoted case by case |
| Shorewood | 18,186 | 55.5 | Quoted case by case |
Populations: 2020 U.S. Census counts as reported on Wikipedia. Distances are approximate straight-line miles; road miles are longer.
Coverage is listed by ZIP code on our service area page. Call (224) 220-3660 with your address and we will tell you what applies to your street before scheduling the estimate.
Generac sizing guidance for Will County homes
Newer, larger homes. With a 1992 median build year, Will County has more houses with 200 A services, central air, finished basements and, in the newer subdivisions of Plainfield, Bolingbrook, Romeoville, New Lenox, Mokena and Frankfort, two air conditioners. For a gas-heated home with one air conditioner, Generac’s 18 kW (18 kW on propane, 17 kW on natural gas) or 22 kW (22 and 21) through a 200 A service-entrance-rated switch is the usual whole-house fit. For two air conditioners we look at the 24 kW (24 and 22.5), 26 kW (26 and 24) or 28 kW (28 and 25), or a smaller unit with a Generac Load Manager or the ecobee by Generac smart thermostat so the second compressor starts only when there is capacity for it.
The sump pump is required, so it gets power. Will County’s building ordinance (sec. 150.070) requires drain tile around any foundation that encloses below-grade space, connected to a sump pump that discharges to an approved drainage facility or at least ten feet from the house, and it forbids tying footing drains or sump pumps into a sanitary sewer or septic system. A house built to that standard depends on its sump pump, and an electric pump does nothing in an outage unless it has backup power. Even Generac’s 10 kW, packaged with a 100 A limited-circuit switch for essentials, can carry the sump pump along with the furnace, refrigerator and lights.
Wells outside the service areas. The Will County Health Department’s Environmental Health Division permits and inspects private wells and septic systems. Outside municipal water service, the well pump is a motor load with a large starting current that has to be counted in sizing; a modest well home that wants essentials covered often starts with Generac’s 14 kW, rated 14 kW on both fuels.
Gas heat makes winter easier. Only about 9 percent of Will County homes heat with electricity, the lowest share in our territory, so in most houses the furnace adds little electrical load and a generator sized for summer air conditioning also covers winter. Generac still recommends its battery heater and oil heater below 32°F and a breather heater below 0°F where heavy icing occurs, and we recommend the battery and oil heaters on every Will County install.
Permits, utilities and installation considerations
Who issues the permit
The Will County Building Ordinance (sec. 150.003) applies to buildings and equipment located outside the limits of the county’s cities, villages and incorporated towns. Inside a municipality, the city or village issues the generator permit. For unincorporated properties, it is the Will County Land Use Department, Development Services Division, Building Section, 58 East Clinton Street, Suite 100, Joliet (815-727-8634), which takes applications, documents, inspection requests and fees through its SmartGov public portal. The county has adopted the 2018 International Residential Code, the 2017 National Electrical Code, the 2018 International Fuel Gas Code and the 2018 International Mechanical Code, with amendments in its 2021 Building Ordinance. The ordinance does not name standby generators, but sec. 150.003 requires a permit in advance for any electrical installation outside municipal limits and sec. 150.110 requires a permit for all electrical work, so a generator and transfer switch fall under those rules.
County wiring rules and contractor requirements
Sec. 150.110 also requires copper wiring on the load side of the meter and EMT conduit throughout structures, and the county issues electrical permits only when a licensed and bonded electrical contractor is listed on the application. Since 1993, every contractor working in unincorporated Will County has had to register with the Land Use Department, carry insurance and post a $10,000 surety bond, and electrical contractors and plumbers also file a letter of intent for the property. GSHA’s standard Generac installation already uses EMT conduit and wiring, as described on our Generac generators page, and we handle the registration and letters as part of the permit.
Natural gas: Nicor Gas
Nicor Gas lists Will County among the counties it serves, and village resident guides in New Lenox and Homer Glen name Nicor as the natural gas provider. Nicor describes a territory of about 17,000 square miles across the northern third of Illinois. Generac lists full-load natural gas use of 235 cubic feet per hour for the 18 kW, 311 for the 22 kW, 291 for the 24 kW and 297 for the 28 kW, on top of your furnace, water heater and other gas appliances; for the 28 kW it lists a required supply pressure of 3.5 inches of water column on natural gas. Our gas technicians check the meter and service line before the install, and when they cannot carry the load we arrange a meter upgrade with Nicor. A home outside Nicor’s lines can run the same Generac on propane.
Electric service: ComEd and recent storms
ComEd delivers electricity in Will County; New Lenox and Homer Glen list it as the provider. The county has recent outage experience: on August 13, 2026 it announced recovery resources after a series of storms, including the severe weather of August 11, caused damage and power outages in several communities, with the county’s emergency management director describing them as significant. The Generac transfer switch isolates the house from ComEd’s lines during an outage so the generator never feeds back toward utility crews, then returns the home to utility power when service is restored.
Drainage and flood risk
The county’s Comprehensive Stormwater Management Plan (1998) describes two river basins, the Des Plaines to the north and west, with the DuPage River as a major tributary, and the Kankakee to the south and east. It reports that most chronic flood problems were along the DuPage River and in one area along the Des Plaines, that local drainage flooding is a bigger problem than river overbank flooding in many parts of the county, and that there is considerably more flood-prone area than the FIRM maps show. In practice, we set the generator on the highest practical ground on the lot, away from swales and window wells, and keep the sump pump on the generator’s covered circuits.
Placement
Generac allows its units as close as 18 inches to a structure, away from doors, windows and fresh air intakes and subject to local codes, which we confirm with the permitting authority at the estimate. Every current Generac air-cooled size uses the same 46.4 by 26.3 inch enclosure. Generac rates its units at 61 to 67 dB(A) at 23 feet under load and 49 to 55 dB(A) during Quiet-Test exercise; on subdivision lots we keep the unit away from neighbors’ windows where possible.
Generac products we install in Will County
The full Generac air-cooled line and its accessories are available in Will County. The size table and installation details are on the main Generac page.

Generators, 10 to 18 kW
Essentials systems with the required sump pump, well homes and one-air-conditioner houses.
Featured: 10 kW (7257), 14 kW (7258), 18 kW (7259)
Explore Generac generator sizes
Generators, 22 to 28 kW
Newer, larger homes with two air conditioners and finished basements.
Featured: 22 kW (7260), 24 kW (7261), 26 kW (7327), 28 kW (7282)
Compare Generac sizesTransfer Switches & Load Management
Service-entrance-rated switches for 200 A services, wired in EMT as the county requires.
Featured: 7321 and 7323-7329 packages, Load Manager 50 A / 100 A
How we install the switchMobile Link & Maintenance
Cellular Mobile Link is standard on current models, useful when you are away during a storm.
Basic (free) and Premium plans; Service Schedule A / B
Generator maintenanceCurrent Generac offers
Ask GSHA about current Generac offers.
Generac promotions carry their own model lists and dates, so we confirm which one, if any, applies to your generator and installation date in the written quote. Financing through Synchrony and Service Finance is available to qualified buyers, subject to credit approval. See financing options.
Questions and answers
Which Will County towns are inside your standard radius?
Bolingbrook, Romeoville, Homer Glen, Plainfield and Lockport are inside the standard 50-mile radius of our Lake Bluff office. Joliet, New Lenox, Crest Hill, Frankfort, Mokena and Shorewood are in the roughly 52-to-56-mile band and are quoted case by case. Call (224) 220-3660 with your address and we will tell you what applies.
Do I need a permit in unincorporated Will County?
Yes. The county ordinance requires a permit in advance for electrical installations outside municipal limits and for all electrical work, issues electrical permits only to licensed and bonded electrical contractors, and requires contractors to register, carry insurance and post a bond. GSHA handles the application through the Land Use Department’s SmartGov portal; inside a city or village, the municipality issues the permit.
Will a Generac run my sump pump?
Yes. Will County’s ordinance requires basements and crawl spaces to drain to a sump pump, so the pump goes on every system we design, from Generac’s 10 kW essentials package up.
Will Nicor need to upgrade my gas meter?
Sometimes. A Generac at full load uses up to about 316 cubic feet of natural gas per hour depending on size, on top of your other appliances. Our gas technicians check the meter and service line, and when they cannot carry the load we arrange the upgrade with Nicor before the install date.
Can one Generac run two air conditioners?
Often, either with a larger size or with a Generac Load Manager or ecobee by Generac thermostat that staggers the compressors. We read both units’ nameplates at the estimate before recommending one approach.
What affects the installed price in Will County?
The generator size and switch, any load management, the length of the gas run, a Nicor meter upgrade, cold-weather accessories, the permit fee, and whether your address is beyond our standard radius. Every job is quoted in writing after a free on-site estimate.
Which Generac offers apply right now?
Ask GSHA about current Generac offers; we confirm eligibility for your model and installation date when we quote.
More Generac pages
Authorized Generac dealer in Illinois (main page) · Generac generator sizes · Generac error codes · Service Schedule A / B reminders · Generator error codes, all brands · Generator installation
Other counties
Request a free Generac installation estimate
Tell us about your Will County home and what you want running during an outage. We will follow up to schedule a free, no-obligation in-home visit, check your panel, gas meter and sump pump, choose a spot for the generator, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA estimator reviews your loads, panel and gas supply and explains the Generac options that fit.
Written quote
You receive an itemized quote with the generator, transfer switch, permits, warranty registration and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Generac dealer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Generac generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
GSHA Services, LTD is an independent authorized Generac dealer. Generac® is a registered trademark of Generac Power Systems, Inc.
Sources
- Census Reporter API, ACS 2024 5-year (2020-2024) tables B25040 and B25035, Will County (05000US17197) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040&geo_ids=05000US17197 (accessed 2026-10-23)
- Will County, Illinois (Wikipedia: 2020 Census populations, county population and area) — https://en.wikipedia.org/wiki/Will_County,_Illinois (accessed 2026-10-23)
- Nicor Gas, Where We Are (Will County service territory) — https://www.nicorgas.com/company/where-we-are.html (accessed 2026-10-23)
- Village of New Lenox, Guide for New Residents (Nicor gas, ComEd electric) — https://www.newlenox.net/292/Guide-for-New-Residents (accessed 2026-10-23)
- Village of Homer Glen, Utilities (Nicor gas, ComEd electric) — https://www.homerglenil.org/2485/Utilities (accessed 2026-10-23)
- Will County Land Use Department, Development Services Division: Building (permits, adopted codes, SmartGov portal) — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-10-23)
- Will County Building Ordinance sec. 150.003 (permit requirement outside municipal limits) — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-10-23)
- Will County Building Ordinance sec. 150.110 Electrical Requirements — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-48224 (accessed 2026-10-23)
- Will County Building Ordinance sec. 150.070 (drain tile and sump pumps) — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-48134 (accessed 2026-10-23)
- Will County Land Use Department: contractor registration FAQ — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (accessed 2026-10-23)
- Will County Comprehensive Stormwater Management Plan (September 1998) — https://willcounty.gov/County-Offices/Economic-Development/Stormwater-Management-Planning-Committee/Plans-Projects/FileId/4021 (accessed 2026-10-23)
- Will County Health Department: Safe Water, Wells and Septic Systems — https://willcountyhealth.org/safe-water-wells-and-septic-systems/ (accessed 2026-10-23)
- Will County news release, August 13, 2026: resources for residents impacted by storms — https://willcounty.gov/News/resources-available-for-will-county-residents-impacted-by-storms (accessed 2026-10-23)
- Generac Home Standby Generator, 28kW (model 7282): fuel pressure — https://www.generac.com/residential-products/standby-generators/gaseous/standby-generator-28kw-7282/ (accessed 2026-10-23)
- Generac spec sheet, 10/14/18 kW air-cooled standby generator — https://productmanuals.generac.com/api/manualfiles/G0072580/A0005151081/0 (accessed 2026-10-23)
- Generac spec sheet, 22-28 kW air-cooled standby generator — https://productmanuals.generac.com/api/manualfiles/G0072600/A0005151077/0 (accessed 2026-10-23)
- GSHA Generac generators page (installation includes EMT conduit and wiring) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/generac-generators/ (accessed 2026-10-23)
- GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
