Authorized Cummins Dealer · Lake County, IL
Cummins Generator Dealer Serving Lake County, IL
Lake County homeowners are served from GSHA’s Lake Bluff office at 11 N Skokie Hwy, inside the county. GSHA Services, LTD is an authorized Cummins dealer and installer: we size, install, start up and service Cummins QuietConnect™ home standby generators and their automatic transfer switches, using our own licensed electricians and gas-line technicians rather than subcontractors. Every project starts with a free in-home estimate.
Two things set Lake County apart when we plan a Cummins installation. The county has two natural gas utilities, North Shore Gas in the east and center and Nicor Gas in the west and northwest, with several villages split between them, so the utility that has to approve a meter upgrade depends on your exact address. And the village, not the county, sets the rules for most installations, from contractor licensing in Lake Bluff to lot-line noise limits in Mundelein. Both affect where the generator goes and what the quote includes, so we settle them at the estimate.

Communities we serve in Lake County
GSHA’s published service area covers these Lake County communities: Antioch, Deerfield, Grayslake, Gurnee, Highland Park, Ingleside, Lake Bluff, Lake Forest, Lake Villa, Lake Zurich, Libertyville, Lincolnshire, Mundelein, Round Lake, Vernon Hills, Wadsworth, Wauconda, Waukegan and Zion. Four more are on the list but cross a county line: Barrington and Buffalo Grove extend into Cook County, and Fox Lake and Island Lake extend into McHenry County. Coverage follows the ZIP code, so the county line does not decide whether we serve you, but it does decide which permit office and sometimes which gas utility you deal with. Ingleside is unincorporated, so its permits run through Lake County rather than a village hall.
GSHA crews have also worked recently in Winthrop Harbor, Beach Park, Kildeer, Deer Park, Long Grove and Hawthorn Woods. Those names are not on the published list, although several share listed ZIP codes, so if you live in one of them, or anywhere in the county not named above, please confirm your address when you call (224) 220-3660. The full ZIP-code list is on the GSHA service area page.
| Area | Gas utility (per tariff lists) | What it means for a generator |
|---|---|---|
| Deerfield, Highland Park, Lake Bluff, Lake Forest, Libertyville, Vernon Hills, Zion | North Shore Gas | Meter upgrades coordinated with North Shore Gas |
| Barrington, Fox Lake, Ingleside, Lake Zurich, Round Lake, Wauconda | Nicor Gas | Meter upgrades coordinated with Nicor Gas |
| Antioch, Grayslake, Gurnee, Lake Villa, Mundelein, Waukegan | On both companies’ lists | We confirm the utility from your gas bill or meter tag |
Cummins generator guidance for Lake County homes
Two air conditioners and a finished basement
Many of the homes we see on the North Shore and in the central county have two central air conditioners, a finished basement with a sump pump and sometimes an ejector pump, and a detached garage or pool equipment. That load list usually points to the Cummins QuietConnect™ 20 kW, rated 75 A on natural gas and 83.3 A on propane, with Cummins’ built-in load management handling the second air conditioner. The controller can manage up to four loads, shedding one when the house is drawing close to the generator’s limit and restoring it when there is room, so both air conditioners can be on the generator without being allowed to start together. For the largest estates, where even a managed 20 kW will not cover what the family wants running, Cummins lists liquid-cooled QuietConnect™ models from 25 kW upward, and we quote those after a site visit.
Essentials-only homes and narrow lots
Not every house needs whole-home power. A ranch in Round Lake or a split-level in Waukegan that only needs the furnace, sump pump, refrigerator, lights and garage door is usually a fit for the 13 kW (54.2 A on either fuel) or the 17 kW (70.8 A). Placement is often the harder question on close-set lots in Highland Park, Lake Bluff and Lake Forest. Cummins’ specification sheet says NFPA 37 permits its air-cooled units to be installed 18 inches from a building, and the enclosure is 34.1 by 36.0 by 27.3 inches, but village zoning and the plat of survey decide the actual spot.
Cold-weather rating near the lake
Cummins says standard air-cooled QuietConnect™ models perform down to 0°F out of the box and the extreme-cold E models down to -40°F. A generator on the exposed side of a house in January is exactly where that difference matters, so we quote the E versions (RS13AE, RS17AE, RS20AE) or a Cummins cold weather kit for Lake County installations.
Gas demand and the meter
Cummins lists full-load natural gas consumption of 217,227 BTU/hr for the 13 kW, 245,954 BTU/hr for the 17 kW and 255,947 BTU/hr for the 20 kW. A large house with two furnaces, a boiler for radiant floors or a pool heater may already be near its meter’s limit, so our gas technicians add the generator’s demand to everything on the meter and check that the unit will receive at least the 3.5 inches of water column Cummins specifies. If the meter has to grow, North Shore Gas or Nicor Gas does that work and we schedule around it.
Older services and lakefront homes
Lakefront and older homes sometimes need a service upgrade or a service-entrance-rated transfer switch, and we identify that at the free estimate so the quote is complete. Our electricians check the ComEd meter socket, the main panel and the service size before choosing the switch, because a whole-house switch has to match what is actually on the wall.
Permits, utilities and installation considerations
Permits and inspections
A standby generator adds wiring, a transfer switch and a gas connection, so it is permitted and inspected by the municipality your address sits in, or by the county if you are unincorporated. GSHA prepares the application, files it and attends the inspections. What the local pages we checked say:
- Unincorporated Lake County (Ingleside and other unincorporated areas). Lake County Planning, Building and Development (500 W Winchester Rd, Unit 101, Libertyville; 847-377-2600) requires a building permit for installing or altering any equipment regulated by the building, electrical or mechanical code, and takes applications through its online Permit ePortal.
- Village of Lake Bluff. The Building Division (847-283-6885) requires building permits for all projects that alter or improve a property and requires every contractor working in the Village to hold a Village contractor’s license. The Village enforces the 2017 National Electrical Code and the 2018 International Fuel Gas Code, among others, which govern a generator’s transfer switch wiring and gas piping.
- Village of Libertyville. The Building Division (325 N Milwaukee Ave, Suite 203; 847-918-2020) reviews plans, issues permits and inspects; its online permit page accepts electrical service upgrade applications by email, and its residential permit page asks for a plat of survey showing the location of outdoor equipment such as an air conditioner, the same kind of plat we prepare for a generator pad.
- Village of Grayslake. The Building Department (10 S Seymour Ave; 847-223-8515) says almost all building or property changes need a permit. In the Prairie Crossing subdivision the Village issues the permit but Lake County performs plan review and inspections under the annexation agreement. The Village limits construction to 7:00 a.m. to 7:00 p.m. on weekdays and 8:30 a.m. to 5:00 p.m. on Saturdays.
- Village of Mundelein. The Building Department (300 Plaza Circle; 847-949-3283) takes applications through its BS&A online portal and needs 48 hours’ notice for inspections.
Placement and noise
Village rules for outdoor equipment vary, and few name generators directly, so we confirm with the village how its rules apply before the permit is filed. Mundelein’s code allows ground-based HVAC equipment only in the interior side or rear yard, at least five feet from the rear lot line and three feet from an interior side lot line, never in the front or corner side yard, and screened where visible from a neighboring lot or the street; we plan a generator pad to the same standard there unless the Village directs otherwise. Mundelein’s noise chapter caps residential sound at the lot line at 55 dBA at night (10:00 p.m. to 7:00 a.m.) and 60 dBA by day, and its exemption is written for HVAC systems. Cummins rates the air-cooled QuietConnect™ units at 65 dB(A) at 23 feet at normal load, which is a different measurement from a lot-line reading, so we keep the unit as far from the property line as the lot allows and schedule the weekly exercise in daytime using Cummins’ quieter crank-only exercise mode. Libertyville applies octave-band sound limits measured within the receiving residence. We could not verify a generator setback or noise rule for Lake Bluff or Grayslake, so GSHA confirms placement with those villages at permit time.
Utilities
North Shore Gas says it serves nearly 166,000 customers in 54 communities between Winnetka and the Illinois-Wisconsin border, and its tariff lists Deerfield, Highland Park, Lake Bluff, Lake Forest, Libertyville, Vernon Hills and Zion among others. Nicor Gas serves the western and northwestern county, including Barrington, Fox Lake, Ingleside, Lake Zurich, Round Lake and Wauconda. Antioch, Grayslake, Gurnee, Lake Villa, Mundelein and Waukegan appear on both companies’ lists, so your gas bill or Nicor’s ZIP lookup tool settles which utility we coordinate a meter upgrade with. ComEd delivers electricity across the whole county, and Lake County has no municipal electric utility, so every transfer switch here sits behind a ComEd meter.
What GSHA handles
From start to finish, GSHA counts the loads and sizes the generator, checks the gas meter and piping, chooses and installs the transfer switch with its own licensed electricians, sets the pad, runs the gas line, pulls the permit, schedules and attends the inspections, starts the generator, tests a transfer under load, connects Cummins remote monitoring and registers the warranty. Once the permit is issued, most installations take one to two days on site.
Cummins products we install in Lake County
The same Cummins line is available county-wide. Full specifications are on the main Cummins page.

QuietConnect™ 20 kW
75 A on natural gas, 83.3 A on propane, with load management for up to four loads. Our usual answer for two air conditioners.
Models: RS20A, RS20AC, RS20AE, RS20ACE
Explore the Cummins 20 kW
QuietConnect™ 17 kW
70.8 A on either fuel. Essentials plus one central air conditioner.
Models: RS17A, RS17AE
Explore the Cummins 17 kW
QuietConnect™ 13 kW
54.2 A on natural gas or propane. Essentials: furnace, sump pump, refrigerator, lights.
Models: RS13A, RS13AE
Explore the Cummins 13 kWLiquid-Cooled QuietConnect™
Cummins lists liquid-cooled models from 25 kW upward for the largest homes; quoted after a site visit.
Models: RS25 and up
Liquid-cooled detailsCurrent Cummins offers
Ask GSHA about current Cummins offers.
Promotions change through the year and each names its qualifying equipment and dates, so tell us your planned installation date and we will say which offer, if any, applies. Financing through Synchrony and Service Finance is on our financing page. See financing options.
Questions and answers
Who installs Cummins generators in Lake Forest, Libertyville and Highland Park?
GSHA Services, LTD, an authorized Cummins dealer with an office in Lake Bluff, installs and services Cummins home standby generators across Lake County using its own licensed electricians and gas-line technicians.
Can one Cummins generator run two air conditioners?
Often yes. The QuietConnect™ 20 kW has load management for up to four loads built into its controller, so it can carry two central air conditioners without letting them start at the same moment. We measure the compressors and the rest of your load list at the estimate to confirm.
Which gas utility will handle my meter?
It depends on the address. North Shore Gas serves the eastern and central county and Nicor Gas the western and northwestern county, and Antioch, Grayslake, Gurnee, Lake Villa, Mundelein and Waukegan appear on both lists. We confirm the utility from your bill and coordinate any meter upgrade with that company.
Does Lake Bluff require anything special?
Lake Bluff requires a building permit for any project that alters or improves a property and requires every contractor working in the Village to hold a Village contractor’s license. GSHA handles the permit application and inspections.
Is there a noise limit for generators in Mundelein?
Mundelein caps residential sound at the lot line at 55 dBA at night and 60 dBA by day, and its exemption is written for HVAC systems. Cummins rates its air-cooled units at 65 dB(A) at 23 feet, a different measurement, so we place the unit as far from the lot line as practical, run the weekly exercise in daytime in Cummins’ crank-only mode and confirm the requirements with the Village before filing the permit.
What if my side yard is narrow?
Cummins’ specification sheet says NFPA 37 permits its air-cooled units to sit 18 inches from a building, and the enclosure is 34.1 by 36.0 inches. If village zoning rules out the side yard, we look at a rear-yard location with a longer gas run.
What affects the installed price in Lake County?
The generator size, whether a service-entrance-rated switch or service upgrade is needed, the length of the gas run, a North Shore Gas or Nicor meter upgrade, screening or placement required by your village and the permit fee. Every job is quoted after a free in-home estimate; see our Cummins installation and pricing page for more.
Which Cummins offers apply right now?
Ask GSHA about current Cummins offers. We confirm what applies to your generator and installation date at the estimate; financing is described on our financing page.
More Cummins pages
Authorized Cummins dealer in Northern Illinois (main page) · Cummins installation and pricing · Cummins generators · Cummins fault codes · Whole-house generator installation
Other counties
Request a free Cummins installation estimate
Tell us about your home and the generator you are considering in Lake County. We will follow up to schedule a free, no-obligation in-home visit, count the loads you want carried, check the gas meter, electrical service and placement, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA advisor reviews your panel, gas meter and the proposed pad location and explains the Cummins options that fit.
Written quote
You receive an itemized quote with the generator, transfer switch, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Cummins dealer for home standby generators. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Cummins generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Cummins Quiet Connect Series Specification Sheet NAS-6254 (RS13A, RS17A, RS20A, RS20AC) — https://mart.cummins.com/imagelibrary/data/assetfiles/0058055.pdf (accessed 2026-10-23)
- Cummins QuietConnect™ Series (home standby) — https://www.cummins.com/en-na/na/generators/home-standby/quietconnect-series (accessed 2026-10-23)
- Cummins QuietConnect™ product listing (liquid-cooled RS25 and up) — https://www.cummins.com/generators/quietconnecttm-series?v=3151&application=Residential+Home+Standby (accessed 2026-10-23)
- Lake County Planning, Building and Development, Building Permits — https://www.lakecountyil.gov/740/Building-Permits (verified by GSHA 2026-09)
- Village of Lake Bluff, Building Permit Process — https://www.lakebluff.org/departments-services/community-development/50-building-permit-process (verified by GSHA 2026-09)
- Village of Lake Bluff, Adopted Building Codes — https://www.lakebluff.org/departments-services/community-development/1003-adopted-building-codes (verified by GSHA 2026-09)
- Village of Libertyville, Residential Permits — https://www.libertyville.com/departments/community_development/building/general_permit/residential_permit.php (verified by GSHA 2026-09)
- Village of Libertyville, Online Permit Application — https://www.libertyville.com/departments/community_development/building/online_permit_application.php (verified by GSHA 2026-09)
- Village of Libertyville Zoning Code Sec. 26-12-2 (noise) — https://library.municode.com/il/libertyville/codes/code_of_ordinances?nodeId=LIILMUCO_CH26ZO_ART12PEST_S26-12-2NO (verified by GSHA 2026-09)
- Village of Grayslake, Building FAQs — https://www.villageofgrayslake.com/669/Frequently-Asked-Questions-FAQs (verified by GSHA 2026-09)
- Village of Grayslake, General Construction Information Handout — https://villageofgrayslake.com/DocumentCenter/View/10574/BDH-1-General-Construction-Information-Handout (verified by GSHA 2026-09)
- Village of Mundelein, Building & Construction Permits — https://www.mundelein.org/405/Building-Construction-Permits (verified by GSHA 2026-09)
- Village of Mundelein Municipal Code 20.52.060(K) (ground-based equipment placement) — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT20ZO_CH20.52TEDEST_20.52.060PEEN (verified by GSHA 2026-09)
- Village of Mundelein Municipal Code 9.08.020 (noise) — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT9OFEAMOSA_CH9.08NO_9.08.020NOPR (verified by GSHA 2026-09)
- North Shore Gas, About (customers and communities served) — https://www.northshoregasdelivery.com/company/about (verified by GSHA 2026-09)
- Nicor Gas service area ZIP lookup — https://www.nicorgas.com/company/where-we-are/our-service-area.html (verified by GSHA 2026-09)
- GSHA Lennox Lake County page (compiled utility tariff lists and village permit research) — https://gshaservices.com/lennox/lake-county-il/ (accessed 2026-10-23)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
