Authorized Peerless dealer · Northern Illinois

Your Authorized Peerless Boiler Dealer in Northern Illinois

GSHA Services, LTD is an authorized Peerless dealer and installer. Peerless boilers are built by PB Heat, LLC, and the residential line covers cast-iron hot-water and steam boilers, the condensing PUREFIRE boiler, the Series PBC combination boiler and Peerless Partner indirect water heaters. Our own crews, working from our headquarters in Woodstock and our office in Lake Bluff, size, install, start up and service Peerless equipment across McHenry, Lake, Boone, Kane, DuPage, Cook and Will counties, and our in-house licensed electricians handle the wiring under the same permit.

A boiler replacement is rarely a simple swap. The right Peerless boiler depends on whether your house has hot-water baseboard, radiators or steam, whether the chimney can still vent a natural-draft appliance, how much heat the house actually loses on a 0°F January night, and whether you want the boiler to make your domestic hot water too. This page walks through those choices, the Peerless models that fit each one, and how utility rebates from Nicor Gas, Peoples Gas and North Shore Gas treat them. Every project starts with a free in-home estimate.

Request a free installation estimateCall (224) 220-3660

Peerless Series MI-e cast iron gas boiler with new copper piping, circulator and chimney vent installed by GSHA Services, LTD in Hickory Hills, IL
A Peerless Series MI-e cast-iron boiler installed by GSHA crews in Hickory Hills, IL (December 2024).

An authorized Peerless installer with its own crews

GSHA does not subcontract boiler work. The comfort advisor who measures your house, the crew that sets the boiler, the licensed electrician who wires the disconnect and controls, and the technician who comes back for the annual cleaning all work for GSHA Services, LTD. That matters with a boiler more than with most equipment, because a boiler’s performance depends on the whole hydronic system around it: the circulator, the air separator and expansion tank, the zone valves, the chimney or vent pipe, and, on a condensing boiler, the outdoor reset curve.

We install Peerless boilers and indirect water heaters, repair existing Peerless boilers of any age, including the discontinued Series MI, and service other boiler brands as well. If you are comparing brands, our boiler installation page covers the other manufacturers we install.

What every Peerless installation includes

  • A room-by-room heat-loss calculation and, on older homes, a radiator or baseboard inventory, so the boiler is sized to the house rather than to the old nameplate.
  • Removal and disposal of the old boiler.
  • Supply and return piping connections, circulator, air separation, expansion tank and fill valve with backflow protection.
  • Venting: a new connector to a checked chimney for a cast-iron boiler, or sealed-combustion PVC venting for a condensing or direct-vent boiler, with a condensate neutralizer where needed.
  • Gas piping and a new gas valve, and the electrical disconnect and control wiring by our own licensed electricians.
  • The municipal or county permit and inspection.
  • Start-up with a combustion analysis, a walkthrough of the controls and Peerless warranty registration.

Published installed-from prices for the Peerless Series MI-e are on our Peerless boiler prices page; other Peerless models are quoted after a free on-site estimate.

Current Peerless offers

Ask GSHA about current Peerless offers.

The consumer rebates PB Heat lists on its website are utility programs outside Illinois, so we do not show a Peerless promotion here. If a manufacturer offer becomes available for your equipment and installation date, we will tell you at the estimate. Financing through Synchrony and Service Finance is described on our financing page.

Illinois gas utility rebates

Utility rebates run separately from any manufacturer offer and depend on which gas company serves your address:

  • Nicor Gas (most of McHenry, Kane, DuPage, Boone and Will counties, western Lake County and most of the Cook suburbs we serve): the 2026 residential rebates include a boiler measure for residential boilers rated 95% AFUE and up, and a combination-boiler measure that requires 95% AFUE, sealed combustion, a modulating burner and a programmed outdoor reset control. The residential PUREFIRE models (95.0 to 95.1% AFUE) and the Series PBC combi (95.1 to 95.3% AFUE) meet the efficiency threshold; cast-iron models in the mid-80s do not. Install during 2026 and claim within 90 days or by January 31, 2027.
  • North Shore Gas and Peoples Gas (eastern and central Lake County, the North Shore and Chicago): the shared 2026 HVAC and Water Heating application lists hot-water boilers with active outdoor-air reset, an indirect water heater paired with a condensing, modulating boiler, and a two-in-one tier for a combination boiler that replaces both an existing gas boiler and an existing gas storage water heater. Applications are due within 30 days of installation or by December 31, 2026.

Check current eligibility with your gas utility before you buy. GSHA supplies the model and serial numbers, AHRI certificate and itemized invoice the applications ask for, and sets up outdoor reset when you plan to apply.

Explore Peerless products

These are the residential gas-fired Peerless products GSHA installs most often, from PB Heat’s current residential lineup. Ratings come from PB Heat’s product pages; the model is chosen from your heat-loss calculation, piping and venting.

PUREFIRE condensing boilers

Stainless steel, fully modulating condensing boiler for hot-water heat; 95% AFUE on the residential sizes, with outdoor reset capability and domestic hot water priority.

Featured: PF-50, PF-80, PF-110, PF-140, PF-200, PF-210

Key specs
  • Input up to 50,000 to 210,000 BTU/h by model
  • 95.0% AFUE (PF-210: 95.1%)
  • Sealed combustion, direct vent, PVC intake and exhaust
  • Cascade capable, up to 16 boilers
  • Natural gas or LP
Request a PUREFIRE estimate

Series PBC combi-boilers

One stainless steel condensing appliance for hot-water heat and on-demand domestic hot water, up to 5.2 GPM at a 70°F rise.

Featured: PBC-34, PBC-40, PBC-52

Key specs
  • Heating input up to 80,000 to 120,000 BTU/h
  • 95.1 to 95.3% AFUE, ENERGY STAR certified
  • Turndown 8.1:1 to 10:1 by model
  • 2- or 3-inch PVC, CPVC, polypropylene or AL29-4C venting
Request a combi estimate
Top view of a Peerless Series MI-e boiler showing the draft hood, chimney vent connector, circulator pump and expansion tank installed by GSHA Services

Series MI-e cast iron

Chimney-vented cast-iron hot-water boiler with the Hydrostat IC control; 84.3 to 84.6% AFUE in seven sizes.

Featured: MI-e-03 to MI-e-09

See MI-e sizes and prices

Series MI-x cast iron

Natural-draft cast-iron hot-water boiler, 84% AFUE, with the Hydrostat IC control and an automatic vent damper.

Featured: MI-x-03 to MI-x-09

Request an MI-x estimate

Series PSCII direct vent

Sealed-combustion cast-iron boiler for homes where the chimney is inadequate or unavailable; 85.0 to 86.0% AFUE.

Featured: PSC II-03 to PSC II-06

Request a PSCII estimate

Series 63 and 63-x steam

Cast-iron steam boilers for one-pipe and two-pipe steam radiator systems in older homes.

Featured: 63-03L to 63-06; 63-x-03 to 63-x-06

Request a steam boiler estimate

Peerless Partner indirect water heaters

Stainless steel storage tanks heated by the boiler, 30 to 119 gallons, for homes that want boiler-made domestic hot water.

Featured: PP and PV series

Water heater services
Combustion analyzer printout recorded during a GSHA Services boiler start-up and safety inspection

Repair and maintenance

Annual cleaning, safety checks and repairs for Peerless boilers of any age, including the discontinued Series MI.

All Peerless residential boilers

Boiler repair and maintenance

Choose a Peerless boiler

Four questions settle most Peerless boiler decisions. We answer them at the free estimate, but it helps to know what they are.

1. Hot water or steam?

A hot-water (hydronic) system pumps heated water through baseboard, radiators or in-floor tubing and returns it to the boiler. A steam system boils water and lets the steam rise to the radiators on its own, with condensate returning by gravity. The two are not interchangeable. If your radiators have a single pipe and an air vent on the side, or a sight glass on the boiler shows a water line, you likely have steam, and the replacement is a Peerless Series 63 or 63-x steam boiler sized from the radiator inventory (PB Heat rates the 63 from 233 to 746 square feet of steam radiation, and the 63-x from 258 to 646). Hot-water homes have every other Peerless option.

2. Can the chimney still vent the boiler?

The cast-iron Series MI-e and MI-x are natural-draft boilers that vent into a chimney through a draft diverter and automatic vent damper. They are the closest like-for-like replacement for the cast-iron boilers in most older Chicago-area basements, and they keep the piping changes small. If the chimney is in poor condition, would need a liner, or no longer serves another appliance, a sealed-combustion boiler that vents through the wall may be simpler: the cast-iron Series PSCII (direct vent, 85.0 to 86.0% AFUE) or a condensing PUREFIRE or PBC, which vent in PVC and need a condensate drain.

3. How much efficiency is worth it?

The Series MI-e is rated 84.3 to 84.6% AFUE; the residential PUREFIRE and the Series PBC are rated 95.0 to 95.3% AFUE. The higher figure is only reached when the water returning from the radiators is cool enough for the boiler to condense, which is why outdoor reset, radiator sizing and the heat-loss calculation matter so much. In a house with generous radiation and tightened windows, a condensing boiler spends most of the winter in its efficient range; in a house with small baseboard that needs very hot water, the gain is smaller. The 95% models are also the ones that line up with Nicor Gas’s boiler and combination-boiler rebate measures.

4. Should the boiler make your hot water?

Three ways to do it: keep a separate water heater; add a Peerless Partner indirect water heater, a stainless steel tank heated by the boiler through a coil, run from the boiler’s domestic hot water priority output (the Hydrostat IC on the MI-e and MI-x has two circulator outputs for DHW priority or a heating zone, and the PUREFIRE control offers DHW priority); or choose a Series PBC combi, which makes on-demand hot water itself, up to 3.4, 4.0 or 5.2 GPM at a 70°F rise depending on the model. A household that runs two showers and a dishwasher at once is usually better served by a boiler plus an indirect tank; a smaller household may prefer the space savings of a combi.

Peerless seriesTypeHeatingEfficiencyVentingBest fit
PUREFIRE (PF-50 to PF-210)Stainless steel condensing, modulatingHot water; 50 to 210 MBH max input95.0 to 95.1% AFUESealed combustion, PVCHot-water homes that want maximum efficiency, zoning and an indirect tank
Series PBC (PBC-34, -40, -52)Stainless steel condensing combiHot water; 80 to 120 MBH max heating input; DHW up to 5.2 GPM95.1 to 95.3% AFUESealed combustion, PVC/CPVC/polypropylene/AL29-4CReplacing a boiler and a tank heater with one wall-hung unit
Series MI-e (03 to 09)Cast iron, natural draftHot water; 70 to 280 MBH input84.3 to 84.6% AFUEChimney, vent damperLike-for-like replacement of an older cast-iron boiler
Series MI-x (03 to 09)Cast iron, natural draftHot water; 70 to 280 MBH input84% AFUEChimney, vent damperLike-for-like cast-iron replacement
Series PSCII (03 to 06)Cast iron, sealed combustionHot water; 65 to 150 MBH input85.0 to 86.0% AFUEDirect ventCast-iron durability where the chimney is unusable
Series 63 / 63-xCast iron steamSteam; 88.5 to 287.5 MBH (63), 100 to 250 MBH (63-x)82.0 to 83.0% AFUEChimneyHomes with steam radiators

Ratings from PB Heat’s current product pages. The Series 63-x is listed for natural gas only; the other series are listed for natural gas or LP.

Why the installation matters

Sizing from heat loss, not from the old nameplate

Many boilers in northern Illinois were sized decades ago for houses with single-pane windows and no insulation, and some were oversized on top of that. A boiler that is far too large short-cycles, wears its controls and, in a condensing model, spends less time in its efficient range. GSHA calculates the heat loss room by room against the 0°F winter design temperature used in local building codes, inventories the radiators or baseboard, and sizes the Peerless boiler from the net I=B=R rating, the heat actually delivered to the system after piping losses.

Chimneys and venting

A cast-iron MI-e or MI-x reuses the chimney, so we inspect it first. Older masonry chimneys may need a liner sized for the new boiler, and when a boiler and a water heater shared one flue, replacing either one changes how the other drafts. Condensing PUREFIRE and PBC boilers and the direct-vent PSCII do not use the chimney at all; they vent through the wall or roof in plastic or stainless pipe, so the termination is planned against window, door, gas meter and lot-line clearances before the permit is filed. If the chimney is left serving a water heater alone, we check that appliance’s draft too.

Outdoor reset and condensing

Outdoor reset lowers the boiler water temperature on mild days and raises it only when it is cold outside. On a condensing boiler it is what keeps the return water cool enough to condense; on a cast-iron boiler, the Hydrostat IC control’s boiler reset serves a similar purpose within the limits a cast-iron boiler allows. Nicor Gas’s combination-boiler measure requires a programmed outdoor reset control, and the Peoples Gas and North Shore Gas boiler measure requires active outdoor-air reset, so GSHA programs it on every condensing installation.

Water quality and the hydronic system

Sludge and air are the enemies of a new boiler, especially a stainless steel condensing heat exchanger. We flush old radiator systems, add an air separator and fill the system with treated water. Our standard Peerless cast-iron installation package includes a Discal air separator, an expansion tank, a backflow preventer with autofill and a commissioning kit for the system water.

Warranty and registration

PB Heat describes its warranties as full-cost rather than prorated, with terms set out in each product’s warranty document; registration is required for some coverage, such as the PUREFIRE and PBC parts and labor terms. The residential PUREFIRE and Series PBC carry a 12-year limited residential heat exchanger warranty, and the PSCII a non-prorated lifetime heat exchanger warranty. Optional 5- and 10-year extended service agreements covering parts and labor are sold through the installing contractor and administered by Trinity Warranty Solutions. GSHA registers the boiler at installation and gives you the confirmation.

Recent Peerless work by GSHA crews

Our job photos include the Peerless Series MI-e shown at the top of this page, installed in Hickory Hills in December 2024 with new copper supply and return piping, a circulator, an expansion tank and a new chimney vent connector, and a start-up combustion analysis recorded on a GSHA boiler installation. We also repair existing Peerless boilers, including the discontinued Series MI, which PB Heat lists as out of circulation; a discontinued boiler with sound sections usually does not need to be replaced. Details are on our Series MI page.

Find your county

Permits, gas utilities, rebate programs and housing age differ from county to county, and they change which Peerless boiler makes sense. Each county page covers the building departments we checked, the gas utility, and the boiler situations we see most often there.

Coverage follows our published ZIP-code list on the service area page. Boone County is served from Woodstock with no local office, so please confirm your address when you call.

More Peerless and boiler pages

Peerless boilers: prices and installation cost · Peerless Series MI-e gas boiler · Peerless Series MI (discontinued) · Peerless Series GM semi-commercial boiler · Boiler installation · Boiler repair and maintenance · Water heater services · All products and brands

Questions and answers

Is GSHA an authorized Peerless dealer?

Yes. GSHA Services, LTD is an authorized Peerless dealer and installer, and our own crews and licensed electricians install and service Peerless boilers and indirect water heaters across the seven counties on this page.

Which Peerless boiler replaces my old cast-iron boiler?

If the chimney is sound and you want the simplest swap, a cast-iron Series MI-e or MI-x vents the same way and connects to the existing piping with few changes. If you want higher efficiency or the chimney is a problem, a condensing PUREFIRE or a direct-vent PSCII changes the venting to a wall or roof termination. We size any of them from a heat-loss calculation.

Do you install Peerless steam boilers?

Yes. PB Heat’s Series 63 (natural gas or LP) and Series 63-x (natural gas) are cast-iron steam boilers. A steam replacement is sized from the radiator inventory, and the near-boiler piping matters as much as the boiler, so we quote steam jobs only after an on-site visit.

What is a combi-boiler and is the Series PBC right for me?

A combi-boiler heats the house and makes domestic hot water on demand in one appliance. The Series PBC delivers up to 3.4, 4.0 or 5.2 GPM of hot water at a 70°F rise depending on the model. It suits households whose hot-water demand fits that flow; larger households usually do better with a boiler and an indirect tank.

Does a Peerless boiler qualify for a gas utility rebate?

It depends on the model and the utility. The 95% AFUE PUREFIRE and Series PBC models meet the efficiency threshold of Nicor Gas’s 2026 boiler and combination-boiler measures (the combination measure also requires a programmed outdoor reset control). Peoples Gas and North Shore Gas list hot-water boilers with outdoor reset, indirect water heaters paired with a condensing, modulating boiler, and a two-in-one combi tier. Check current eligibility with your utility.

Can my discontinued Peerless boiler be repaired?

Usually, if the cast-iron sections are sound. GSHA repairs existing Peerless boilers, including the Series MI, which PB Heat lists as out of circulation. Leaking sections, repeated failures or failed safety controls are the usual reasons to replace instead.

What warranty comes with a Peerless boiler?

Terms vary by series and are set out in PB Heat’s warranty documents. The residential PUREFIRE and Series PBC carry a 12-year limited residential heat exchanger warranty, the PSCII a non-prorated lifetime heat exchanger warranty, and registration is required for parts and labor coverage on some models. Extended 5- and 10-year service agreements are available through the installer. GSHA registers the boiler for you.

How long does a boiler replacement take?

A like-for-like cast-iron replacement is usually a one-day job once the permit is issued; a change to condensing or direct-vent equipment, new zoning or an indirect tank can add time. We give you the schedule in the written quote.

Do you service Peerless boilers you did not install?

Yes. GSHA cleans, inspects and repairs Peerless boilers regardless of who installed them. Call (224) 220-3660 or see our boiler repair and maintenance page.

Request a free Peerless installation estimate

Tell us about your home and the boiler you have now. We will follow up to schedule a free, no-obligation in-home visit, calculate the heat loss, check the existing piping, radiators, chimney or venting, gas and electrical, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA comfort advisor checks the existing boiler and system and explains the Peerless options that fit.

Written quote

You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Peerless dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Peerless boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. PB Heat – Peerless residential boilers (product lineup) — https://www.peerlessboilers.com/product_category/residential/ (accessed 2026-10-23)
  2. PB Heat – Peerless PUREFIRE Residential — https://www.peerlessboilers.com/products/peerless-purefire/ (accessed 2026-10-23)
  3. PB Heat – PUREFIRE Residential cut sheet (outdoor reset, DHW priority, cascade, PVC venting, warranty) — https://www.peerlessboilers.com/wp-content/uploads/2023/04/CUT_PureFireRes_web0825.pdf (accessed 2026-10-23)
  4. PB Heat – Series PBC combi boiler — https://www.peerlessboilers.com/products/peerless-combi/ (accessed 2026-10-23)
  5. PB Heat – Series MI-e — https://www.peerlessboilers.com/products/series-mi-e/ (accessed 2026-10-23)
  6. PB Heat – Series MI-x — https://www.peerlessboilers.com/products/series-mi-x/ (accessed 2026-10-23)
  7. PB Heat – Series PSCII — https://www.peerlessboilers.com/products/series-pscii/ (accessed 2026-10-23)
  8. PB Heat – Series 63 steam boiler — https://www.peerlessboilers.com/products/series-63/ (accessed 2026-10-23)
  9. PB Heat – Series 63-x steam boiler — https://www.peerlessboilers.com/products/series-63-x/ (accessed 2026-10-23)
  10. PB Heat – Peerless Partner indirect-fired water heaters — https://www.peerlessboilers.com/products/peerless-partner-indirect-fired-water-heater/ (accessed 2026-10-23)
  11. PB Heat – Warranty (complete warranty program, extended service agreements via Trinity Warranty Solutions) — https://www.peerlessboilers.com/consumers/warranty/ (accessed 2026-10-23)
  12. PB Heat – Consumer Rebates (utility programs outside Illinois) — https://www.peerlessboilers.com/consumers/rebates/ (accessed 2026-10-23)
  13. Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
  14. North Shore Gas HVAC and Water Heating Application 2026 — https://www.northshoregasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23, via GSHA Navien Lake County page)
  15. Peoples Gas HVAC and Water Heating Application 2026 — https://www.peoplesgasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23, via GSHA Navien Cook County page)
  16. City of Woodstock City Code Title 7 Chapter 1 Building Code (0 F winter design temperature) — https://codelibrary.amlegal.com/codes/woodstockil/latest/woodstock_il/0-0-0-13901 (accessed 2026-09-16, via GSHA Lennox McHenry County page)
  17. GSHA Peerless boilers prices page (MI-e installed-from prices, installation package, Hickory Hills installation) — https://gshaservices.com/hvac-services-illinois-wisconsin/boiler-installation/peerless-boilers-prices/ (accessed 2026-10-23)
  18. GSHA Peerless Series MI (discontinued) page — https://gshaservices.com/product/peerless-boilers-mi-series-boiler/ (accessed 2026-10-23)
  19. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
  20. GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)