Navien Service Specialist · Cook County, IL
Navien Water Heater & Boiler Service in Cook County, IL
GSHA Services, LTD is a Navien Service Specialist for water heaters and boilers serving Cook County’s northern, northwestern and near-western suburbs, plus Tinley Park and Lemont. We have no office in Cook County; work is dispatched from Lake Bluff or Woodstock. GSHA reviews equipment sizing, gas supply, venting, condensate, water connections, electrical work and applicable permit requirements before providing a written installation proposal. Contact the office to confirm service for your exact address.
Cook County housing is the oldest we serve: the median home was built in 1961, about 28 percent of housing units date from 1939 or earlier, and about 73 percent were built before 1980 (U.S. Census Bureau, ACS 2020-2024). Natural gas heats about 80 percent of occupied homes, electricity about 16 percent and propane only about 1.5 percent. That means two very different Navien conversations: replacing an aging boiler and water heater in a pre-war house with a combi-boiler, and fitting a compact wall-hung tankless into a condo, townhome or tight basement where a tank heater no longer makes sense.

Communities we serve in Cook County
GSHA’s service-area ZIP list covers Arlington Heights, Palatine, Des Plaines, Park Ridge, Mount Prospect, Prospect Heights, Wheeling, Rolling Meadows, Elk Grove Village, Schaumburg, Hoffman Estates and Streamwood in the northwest suburbs; Glenview, Northbrook, Morton Grove, Golf, Skokie, Wilmette, Kenilworth, Winnetka and Glencoe to the north; Franklin Park, Schiller Park, River Grove, Melrose Park, Hillside, Berkeley, Broadview and Westchester to the near west; and Tinley Park and Lemont to the south.
Some of these cross county lines, which changes the permit office rather than the scheduling: Barrington and Buffalo Grove are partly in Lake County, Bartlett in DuPage and Kane, Hanover Park in DuPage, Lemont in DuPage and Will, Tinley Park in Will, and Elgin’s Hanover Township portion is in Cook; Palatine is partly in Lake County and Schaumburg partly in DuPage.
Only some City of Chicago ZIP codes are on the list. GSHA crews have worked at Chicago addresses, but city coverage is confirmed address by address, as it is for Cicero, Berwyn, Matteson and Richton Park. The full ZIP-code list is on the GSHA service area page; if your ZIP is missing, call (224) 220-3660.
Navien equipment guidance for Cook County homes
Pre-war houses with radiators. Nearly half of Cook County’s housing was built before 1960, and in the older parts of Park Ridge, Wilmette, Winnetka, Glencoe, Kenilworth, Skokie and the near-west suburbs, hot-water and steam radiator systems are common. For a hot-water system with a separate tank heater, a Navien NCB-H combi-boiler replaces both with one wall-hung 95% AFUE unit (60,000 to 150,000 BTU/h heating, up to 5.4 GPM of domestic hot water at a 70°F rise) and frees the floor space the old cast-iron boiler occupied; larger North Shore homes may need the NFC-H (175,000 or 199,900 BTU/h heating) or an NFB-H heating boiler with a separate water heater. Navien’s combi and heating boilers are hot-water boilers, so a steam system is a different conversation that GSHA evaluates on site. GSHA inventories the radiators, calculates heat loss and reviews the water temperatures and controls before recommending equipment.
Condos and townhomes. More than half of Cook County’s housing units are in buildings with two or more units, and many condo owners replace a tank heater in a utility closet. A wall-hung Navien NPE-2 can free that closet, but venting is the hard part: the unit vents through PVC and needs a code-compliant termination, which may mean an exterior wall penetration that the association must approve. Palatine’s own water heater rules show how much the closet matters: a replacement heater in a confined space needs two 100-square-inch ventilation openings, new installations are prohibited inside a storage closet, and a tankless application must show the heater and the floor drain on a diagram. GSHA checks the building, the association rules and the local code before quoting.
Single-family homes in the northwest suburbs. In Arlington Heights, Palatine, Mount Prospect, Schaumburg and Hoffman Estates, the typical house dates from the 1960s to the 1980s with a gas furnace and a tank water heater on a shared flue. Replacing the tank with a Navien NPE-A2 or NPE-S2 removes the water heater from the chimney; GSHA then checks the furnace’s remaining flue. Size comes from simultaneous demand: Navien rates the 240 sizes at 5.6 to 5.8 GPM, the 210 sizes at 5.1 to 5.3 GPM and the 180 sizes at 4.3 GPM at a 67°F rise. Check the current program for the utility on your bill; eligibility depends on the exact model, existing equipment, installation date and other program requirements.
Recirculation in long, narrow houses. Older Cook County homes often run the water piping a long way from a front basement to a rear second-floor bath. Navien’s NPE-A2 has a built-in ComfortFlow buffer tank and recirculation pump. A compatible NaviCirc arrangement may use existing hot and cold piping, depending on the model and plumbing. GSHA reviews the configuration and controls before recommending a setup. Manufacturer warranty terms depend on the exact model, use and installation; review the current written terms with your quote.
Forced-air homes. If your home uses a furnace and ductwork, review our furnace installation options and ask which equipment fits your home. Navien boiler recommendations depend on a compatible hot-water heating system.
Permits, utilities and installation considerations
Water heater and boiler permits
Nearly every Cook County address is inside a municipality that issues its own permits; the Cook County Department of Building and Zoning covers only unincorporated areas and cannot process permits for Chicago or incorporated suburbs (e-Permits). GSHA applies for the permit, supplies the plumber’s letter of intent and equipment sheets, and meets the inspector.
- Palatine requires a permit for “replacing or installing an air conditioning, heating unit or water heater” (when a permit is required). Its 2026 Water Heater Replacement handout makes it an Express permit filed online, installed per the manufacturer’s specifications and the Illinois State Plumbing Code, with a full-port shut-off on the cold side, dielectric unions between dissimilar metals, lead-free solder, rigid Type L copper without flexible connectors, a full-size relief valve discharge ending within 6 inches of the floor, a heat trap, bonding, and an 18-inch raise for a gas water heater in a garage. Tankless heaters need a diagram showing the heater and floor drain, the plumber must be registered with the Village and submit a letter of intent, and the permit may take a five-day review. In an emergency, work can start to restore hot water if the permit is applied for within one business day; a final inspection follows.
- Arlington Heights lists both “Boiler Replacement” and “Water Heater Replacement” as over-the-counter permits, applied for through the Civic Access portal.
- Des Plaines takes applications through its Customer Self Service portal (Building and Permits), and Park Ridge schedules inspections with a one-to-two-working-day wait (Permits and Inspections); GSHA confirms each city’s water heater and boiler submittals when it files.
- City of Chicago (confirm your address first) does not require a permit for repairing or replacing a boiler in kind, or an element of its heating system such as a radiator, in a residential building up to four stories (Department of Buildings); a Navien condensing boiler replacing a cast-iron boiler is a different type, so GSHA confirms the permit path with the Department of Buildings.
- Unincorporated Cook County permits through the County’s Department of Building and Zoning.
Venting and chimneys in older buildings
Navien condensing units vent in PVC (2-inch PVC up to 75 feet for the NPE-2 series), so the termination location, clearances from windows, doors and neighboring buildings, and in some suburbs the side-yard distance, are worked out before the permit is filed. In a pre-war house the old masonry chimney often served the boiler and the water heater together; when both are replaced by a combi that vents through PVC, the chimney may be abandoned entirely, and when only the water heater leaves, the remaining appliance’s flue is checked. Peoples Gas and North Shore Gas already require a chimney liner when a high-efficiency furnace orphans a water heater on a chimney, and GSHA applies the same check in reverse. Condensate is neutralized before it reaches a drain.
Utilities and rebates
Confirm the utility on your current bill before reviewing incentives. Nicor Gas, Peoples Gas and North Shore Gas have separate service areas and program requirements. ComEd and municipal electricity programs are separate from gas-utility programs.
- Check Peoples Gas or North Shore Gas for current requirements where either serves your address.
- Check Nicor Gas for current requirements where it serves your address.
Eligibility depends on the exact equipment, the system being replaced, installation date, documentation and current program terms. Confirm these before including an incentive in your budget.
Gas, electrical and what GSHA handles
GSHA checks the meter and piping against the new unit’s input (up to 199,900 BTU/h on the NPE-240 sizes and up to 210,000 BTU/h for hot water on the combis), installs a new gas valve and any larger piping, isolation valves for future flushing, the relief valve and expansion tank, venting and condensate neutralizer, and its own licensed electricians make the electrical connection. Financing is described on GSHA’s financing page.
Recent GSHA work in Cook County
GSHA crews have recently worked in Arlington Heights, Palatine, Des Plaines, Mount Prospect, Glenview, Wheeling, Schaumburg and Hoffman Estates, and in Barrington and Bartlett on the county’s edges; jobs at individual Chicago addresses and in suburbs outside the ZIP list are confirmed case by case.
Residential Navien water heaters and boilers in Cook County
Review residential Navien water heater and boiler options with GSHA. Model selection, local availability and installation scope depend on your home. See our Navien installation and service page, then contact us to confirm the next step for your address.

NPE-A2 tankless
Built-in ComfortFlow recirculation; 0.95 UEF.
Featured: NPE-240A2, NPE-210A2, NPE-180A2
Explore Navien tankless
NPE-S2 tankless
Standard condensing tankless, up to 0.96 UEF.
Featured: NPE-240S2, NPE-210S2, NPE-180S2, NPE-150S2
Compare NPE-S2 models
NCB-H combi-boilers
Radiator heat plus on-demand hot water, 95% AFUE.
Featured: NCB-190/060H to NCB-250/150H
Explore combi-boilersNFC-H combi-boilers
Fire-tube combis for large North Shore homes.
Featured: NFC-250/175H, NFC-250/200H
Explore NFC-H
NHB-H boilers
Heating-only condensing boilers; pair with an indirect tank.
Featured: NHB-55H, NHB-80H, NHB-110H, NHB-150H
Explore Navien boilersNFB-H boilers
Fire-tube heating boilers, 175,000 and 199,900 BTU/h.
Featured: NFB-175H, NFB-200H
Explore NFB-HNaviLink, NaviCirc, PeakFlow
Compatible controls, recirculation and scale-prevention options depend on the exact model and installation. PeakFlow does not soften water or remove hardness.
Featured: NaviLink, NaviCirc, PeakFlow
See accessoriesOffers and financing
Ask GSHA about current options for your project. Financing, manufacturer promotions and utility rebates have separate terms and eligibility requirements. Confirm the exact equipment, installation date and current requirements before including an incentive in your budget.
See our financing information or call (224) 220-3660 to discuss your project.
Questions and answers
Do you install Navien units in Chicago?
Case by case. Only some City of Chicago ZIP codes are on GSHA’s published service-area list, and our crews have worked at Chicago addresses; call (224) 220-3660 to confirm yours.
What does Palatine require for a water heater permit?
An online Express permit with the signed contract and the equipment sheet, a plumber registered with the Village and a letter of intent, and a final inspection. A tankless needs a diagram showing the heater and floor drain, and the handout lists installation details such as a full-port cold-water shut-off, rigid Type L copper and a relief discharge within 6 inches of the floor. In an emergency, work can start if the permit is applied for within one business day.
Is a boiler replacement an over-the-counter permit in Arlington Heights?
Yes. Arlington Heights lists both boiler replacement and water heater replacement among its over-the-counter permits through the Civic Access portal.
Can a Navien combi-boiler work with my old radiators?
On a hot-water radiator system, usually. A Navien NCB-H or NFC-H heats the radiators and makes domestic hot water on demand; outdoor reset keeps water temperatures low enough on mild days for the boiler to condense. Steam systems need a different approach, which GSHA evaluates on site.
Will a Navien tankless qualify for a Peoples Gas or North Shore Gas rebate?
Check the current program from the utility on your bill for the exact model and project. Efficiency alone does not establish eligibility. The equipment being replaced, installation date, documentation and application deadline may also affect qualification.
And in a Nicor Gas suburb?
Check Nicor Gas’s current requirements for the exact equipment and project. Water heaters, heating boilers and combi-boilers can have different eligibility rules. Confirm the model, existing equipment, installation date and application requirements before relying on an incentive.
Can you put a tankless in my condo?
Often, if the unit can vent to a code-compliant exterior termination and the association approves the wall penetration. GSHA checks the building, the association rules and the municipal code before quoting.
Do you service Navien units installed by others?
Yes. GSHA repairs and maintains Navien tankless water heaters, combi-boilers and boilers from any installer, including discontinued first-generation NPE units. Call (224) 220-3660.
More Navien pages
Navien water heater and boiler service (main page) · Navien tankless water heaters: prices and installation · Navien boilers and combi-boilers prices · Boiler installation · Water heater services
Other counties
Need help with an existing Navien?
Use our Navien repair guide for symptoms and service, or learn about tankless maintenance.
Request a Navien installation estimate or service visit
Tell us about your home in Cook County, the equipment you have and whether you need installation, repair or maintenance. GSHA will confirm service availability and the next step for your address.
Open GSHA Online BookingCall (224) 220-3660
For an installation assessment, we review the existing equipment and the work needed before providing a written quote. If you need help choosing a service, call our office.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and a Navien Service Specialist for water heaters and boilers. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Navien water heaters and boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Cook County (05000US17031) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17031 (accessed 2026-10-23)
- Share of Cook County housing units in multi-unit buildings, as cited on the GSHA Lennox Cook County page — https://gshaservices.com/lennox/cook-county-il/ (accessed 2026-10-23)
- Navien Installer/Service Locator — https://www.navieninc.com/installers (accessed 2026-10-23)
- Navien NPE-A2 Series — https://www.navieninc.com/series/npe-a2 (accessed 2026-10-23)
- Navien NPE-S2 Series — https://www.navieninc.com/series/npe-s2 (accessed 2026-10-23)
- Navien NPE-A2 warranty — https://www.navieninc.com/series/npe-a2/warranty (accessed 2026-10-23)
- Navien NCB-H Series — https://www.navieninc.com/series/ncb-h (accessed 2026-10-23)
- Navien NFC-H Series — https://www.navieninc.com/series/nfc-h (accessed 2026-10-23)
- Navien NHB-H Series — https://www.navieninc.com/series/nhb-h (accessed 2026-10-23)
- Navien NFB-H Series — https://www.navieninc.com/series/nfb-h (accessed 2026-10-23)
- Navien NPF Series — https://www.navieninc.com/series/npf (accessed 2026-10-23)
- Village of Palatine – When a Building Permit is Required — https://www.palatine.il.us/621/When-a-Building-Permit-is-Required (accessed 2026-10-23)
- Village of Palatine – 2026 Water Heater Replacement handout — https://www.palatine.il.us/DocumentCenter/View/721/Water-Heater-Replacement-PDF (accessed 2026-10-23)
- Village of Palatine – Express Building Permits — https://www.palatine.il.us/609/Express-Building-Permits (accessed 2026-10-23)
- Village of Arlington Heights – Over the Counter Permits — https://www.vah.com/over_the_counter_permits/index.php (accessed 2026-10-23)
- City of Des Plaines – Building and Permits — https://www.desplainesil.gov/Departments/Community-and-Economic-Development/Building-and-Permits (accessed 2026-09-16, via GSHA Lennox Cook County page)
- City of Park Ridge – Permits and Inspections — https://www.parkridge.us/your_government/city_departments/permits_and_inspections_2.php (accessed 2026-10-23)
- City of Chicago Department of Buildings – mechanical work not requiring a permit — https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/help/faq/DOB/bldg-permit-not-required/worktype/mechanical.html (accessed 2026-10-23)
- Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-09-16)
- Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (accessed 2026-09-16)
- Peoples Gas HVAC and Water Heating Application 2026 — https://www.peoplesgasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23)
- North Shore Gas HVAC and Water Heating Application 2026 — https://www.northshoregasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23)
- Peoples Gas residential rebates — https://www.peoplesgasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
- North Shore Gas residential rebates — https://www.northshoregasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
- Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
