Navien Service Specialist · Kane County, IL
Navien Water Heater & Boiler Service in Kane County, IL
Kane County homeowners are served by GSHA Services, LTD, a Navien Service Specialist for water heaters and boilers. Our crews serve St. Charles, Geneva, Batavia, Elgin, Aurora and the other communities on our service-area list. GSHA reviews sizing, gas supply, venting, condensate, water connections, electrical work and applicable permit requirements before providing an installation quote. Call (224) 220-3660 to confirm service availability for your address.
Kane County counted 516,522 residents in the 2020 Census. Of its roughly 184,700 occupied homes, about 86 percent heat with utility gas, about 11.5 percent with electricity and about 1.5 percent with propane (U.S. Census Bureau, 2020-2024 American Community Survey), and Nicor Gas is the gas utility across the county. The median home was built in 1985, and about 45 percent were built before 1980, including the historic river-town cores of Elgin, Aurora, St. Charles, Geneva and Batavia, where gravity-era chimneys and hot-water radiator systems are still common. That mix makes Kane County a place where both Navien tankless water heaters and Navien combi-boilers earn their keep.

Communities we serve in Kane County
GSHA’s service-area ZIP list includes these Kane County communities: St. Charles, Geneva (the county seat), Batavia, Elgin, Aurora, Carpentersville, East Dundee and West Dundee, Hampshire, Algonquin, Huntley, Bartlett and the Wasco area near St. Charles.
Several of these cross county lines. St. Charles and Batavia extend partly into DuPage County, Elgin into Cook County, and Aurora into DuPage, Kendall and Will counties. Algonquin and Huntley straddle the Kane/McHenry line and also appear on our McHenry County page, and Bartlett is mainly a Cook and DuPage village with a small Kane parcel. The Wasco area is unincorporated, and Geneva’s Mill Creek subdivision is outside the city’s jurisdiction, so permits there go through Kane County rather than a city hall.
Campton Hills, Pingree Grove and Sleepy Hollow are not named on our published ZIP list, although they use listed ZIP codes such as 60175, 60140 and 60118; if you live there, please confirm coverage before scheduling. The full ZIP-code list is on our service area page.
Navien equipment guidance for Kane County homes
Subdivision homes from the 1980s onward. Much of Kane County’s housing east and west of the Fox River was built in the last four decades, typically with a gas furnace and a 40- or 50-gallon gas water heater side by side in the basement. Replacing that tank with a Navien NPE-2 frees floor space and removes the tank’s standby losses; the choice between the NPE-A2 and NPE-S2 comes down to whether you want built-in recirculation. In a two-story with a primary bath over the garage, ComfortFlow in the NPE-A2 (a buffer tank and pump inside the cabinet) shortens the wait for hot water; in a compact ranch, an NPE-S2 at up to 0.96 UEF is the simpler choice. Size follows winter demand: Navien rates the NPE-240S2 at 5.8 GPM, the NPE-210S2 at 5.3 GPM and the NPE-180S2 at 4.3 GPM at a 67°F rise.
River-town houses with radiators. In the older neighborhoods of Elgin, Aurora, St. Charles, Geneva and Batavia, about one Kane County home in eight was built before 1940, and many still heat with hot-water radiators. When the old boiler and the water heater are both near the end, a Navien NCB-H combi-boiler replaces them with one 95% AFUE wall-hung unit that supplies up to 5.4 GPM of domestic hot water at a 70°F rise and up to 150,000 BTU/h of heat, with built-in control of up to three zone valves or pumps. For large Victorian homes whose heat loss exceeds that, the NFC-H combi (175,000 or 199,900 BTU/h heating) or an NFB-H heating boiler with a separate water heater fits. GSHA calculates the heat loss and inventories the radiators first, because old boilers in these houses were often sized for drafty windows that have long since been replaced.
Keeping a condensing boiler condensing. A condensing boiler reaches its rated efficiency only when the water returning from the radiators is cool enough to condense the flue gases. That is why Nicor Gas’s 2026 combination-boiler measure requires a programmed outdoor reset control: the boiler lowers its supply temperature on mild days and raises it only in deep cold. Navien’s modulation (heating turndown up to 11:1 on the NCB-H and up to 15:1 on the NHB-H and NFB-H) lets a correctly sized unit run low and steady instead of cycling on and off.
Gas piping in Elgin and elsewhere. A Navien NPE-240 or NFC-H can fire at up to 199,900 BTU/h for space heating and up to 210,000 BTU/h for hot water on the combi models, far more than the tank it replaces. Navien lists 1/2-inch gas piping up to 24 feet for the NPE-2 series and the NFB-H, subject to local code, but the meter and the other appliances on the line set the real limit. Elgin’s local HVAC amendments add a material rule: interior gas piping must be schedule 40 black iron from the meter to the appliance connector, with limited exceptions. GSHA sizes and runs the piping to the code of the town you live in.
Ducted homes and controls. If your home uses a forced-air furnace, review our furnace installation options. For Navien water heaters and boilers, NaviLink, NaviLink Lite and NaviCirc have model and configuration requirements. GSHA checks the exact equipment and installation before recommending an accessory.
Permits, utilities and installation considerations
Water heater and boiler replacements in Kane County go through the local building department, and the rules are set town by town. GSHA pulls the permit and schedules the inspection; here is what the municipalities we checked publish.
- Geneva. The Building Division’s Water Heater Replacement Permit Information sheet (revised May 1, 2026) says a building permit is required before replacing a water heater, issued over the counter. Plumbing on a residential project may be done by the owner only if the owner occupies the home; otherwise it must be done by an Illinois licensed plumber, who submits a letter of intent with copies of the Illinois plumbing license and Illinois contractor license. Inspections need 24 hours’ notice, vent systems must be UL-listed and terminated per the manufacturer’s instructions, and chimneys or vents must be sized or resized to draft properly (630-262-0280, pdf@geneva.il.us). Geneva’s furnace and AC handout adds that the final inspection confirms the furnace and water heater have proper make-up air. Mill Creek is outside Geneva’s jurisdiction and permits through Kane County.
- St. Charles. The city’s Building Permits FAQs require a permit and final inspection when a furnace or air conditioner is replaced (630-377-4406); we confirm the water heater and boiler requirement with the Building Division when we file.
- Batavia. The Building Permit Applications page lists heating and mechanical equipment among projects that need a permit, filed through the One Stop Permit Portal (630-454-2700).
- Elgin. Ordinance G15-25 requires a permit to install or alter HVAC equipment and requires schedule 40 black iron interior gas piping from the meter to the appliance connector, with limited exceptions; the city’s Permits page puts responsibility for scheduling inspections on the permit holder, which GSHA handles (3-1-1 in Elgin or 847-931-6001).
- Unincorporated Kane County. The Kane County Building & Zoning Division permits unincorporated properties, including Mill Creek and Wasco, through the county web portal and asks 48 to 72 hours’ notice for inspections (630-232-3485).
- Aurora and other municipalities. GSHA confirms the permit path for your address before work starts.
Venting, make-up air and chimneys. Navien condensing units are sealed-combustion appliances that vent and draw combustion air through PVC (the NPE-2 series lists 2-inch PVC up to 75 feet), so they do not rely on room air the way an atmospheric tank does. What changes is the chimney left behind: when a water heater that shared a flue with a furnace is removed, the furnace may be left venting alone into a flue that is now too large, which is exactly the draft issue Geneva’s handout calls out. GSHA checks the remaining appliance and includes a liner in the quote if one is needed. Condensate from the Navien unit runs through a neutralizer to a drain.
Utilities and rebates. Check the utility on your bill and use Nicor Gas’s service-area lookup where needed. Review the current residential rebate requirements for the exact model and project. Existing equipment, installation date and application terms can affect eligibility. Batavia, Geneva and St. Charles run municipal electric utilities; electricity and gas programs have separate requirements. Confirm the relevant program before including an incentive in your budget.
What GSHA handles. Removal of the old water heater or boiler, gas piping to local code and a new gas valve, isolation service valves for future flushing, the relief valve and thermal expansion tank, PVC venting and condensate neutralizer, recirculation setup, the electrical connection by our own licensed electricians, the permit, the inspection, start-up and a walkthrough of the controls.
Recent GSHA work in Kane County
GSHA crews have recently worked in Aurora, Elgin and West Dundee, and in Huntley and Algonquin, which straddle the Kane/McHenry line.
Residential Navien water heaters and boilers in Kane County
Review residential Navien water heater and boiler options with GSHA. Model selection, local availability and installation scope depend on your home. See our Navien installation and service page, then contact us to confirm the next step for your address.

NPE-A2 tankless
Condensing tankless with ComfortFlow recirculation built in.
Featured: NPE-240A2, NPE-210A2, NPE-180A2
Explore Navien tankless
NPE-S2 tankless
Standard condensing tankless, up to 0.96 UEF.
Featured: NPE-240S2, NPE-210S2, NPE-180S2, NPE-150S2
Compare NPE-S2 models
NCB-H combi-boilers
Radiator heat plus on-demand hot water, 95% AFUE.
Featured: NCB-190/060H to NCB-250/150H
Explore combi-boilersNFC-H combi-boilers
Fire-tube combis for large older homes, up to 199,900 BTU/h heating.
Featured: NFC-250/175H, NFC-250/200H
Explore NFC-H
NHB-H boilers
Heating-only condensing boilers with three-zone control.
Featured: NHB-55H, NHB-80H, NHB-110H, NHB-150H
Explore Navien boilersNFB-H boilers
Fire-tube heating boilers, 175,000 and 199,900 BTU/h.
Featured: NFB-175H, NFB-200H
Explore NFB-HNaviLink, NaviCirc, PeakFlow
Phone control, recirculation and scale prevention.
Featured: NaviLink, NaviCirc, PeakFlow
See accessoriesOffers and financing
Ask GSHA about current options for your project. Financing, manufacturer promotions and utility rebates have separate terms and eligibility requirements. Confirm the exact equipment, installation date and current requirements before including an incentive in your budget.
See our financing information or call (224) 220-3660 to discuss your project.
Questions and answers
Do you serve my Kane County address?
Yes, if you are in a listed ZIP: St. Charles, Geneva, Batavia, Elgin, Aurora, Carpentersville, East Dundee, West Dundee, Hampshire, Algonquin, Huntley, Bartlett or the Wasco area. Campton Hills, Pingree Grove and Sleepy Hollow are not named on the published list, although they use listed ZIP codes, so call (224) 220-3660 to confirm.
Does Geneva require a permit to replace a water heater?
Yes. Geneva’s Water Heater Replacement Permit Information sheet requires a building permit before the replacement, issued over the counter, with the work done by an Illinois licensed plumber (or the owner-occupant) and an inspection on 24 hours’ notice. GSHA handles the application and letter of intent.
Can a combi-boiler replace the boiler and water heater in my older St. Charles home?
A combi-boiler may fit a compatible hot-water heating system. GSHA first confirms whether the home uses hot water or steam, then checks heat loss, the distribution system and domestic hot-water demand. A heating-only boiler with a separate water heater may suit better; the recommendation depends on the home.
Will my gas line handle a tankless water heater?
Sometimes as-is, sometimes not. A Navien NPE-240 fires at up to 199,900 BTU/h. Navien lists 1/2-inch gas piping up to 24 feet for the series, but the meter and other appliances decide, and Elgin requires schedule 40 black iron interior gas piping. GSHA checks and quotes any piping changes.
Does a Navien unit qualify for a Nicor Gas rebate?
Check the current Nicor Gas program for the exact model and project. Eligibility depends on more than an efficiency rating, including the equipment being replaced, installation date and application requirements.
I live in Batavia, Geneva or St. Charles with city electric. Does that matter?
Check both your gas and electric bills. Municipal electric programs and gas-utility programs have separate requirements, and the relevant program depends on the equipment and fuel. Confirm eligibility with the utility before relying on an incentive.
What happens to my chimney when the water heater is removed?
If a furnace still uses it, GSHA checks that the furnace drafts properly on its own and adds a liner to the quote if needed. Geneva’s own handout requires chimneys and vents to be sized for proper draft.
Do you service Navien units you did not install?
Yes. GSHA repairs and maintains Navien tankless water heaters, combi-boilers and boilers from any installer, including first-generation NPE units. Call (224) 220-3660.
More Navien pages
Navien water heater and boiler service (main page) · Navien tankless water heaters: prices and installation · Navien boilers and combi-boilers prices · Boiler installation · Water heater services
Other counties
Need help with an existing Navien?
Use our Navien repair guide for symptoms and service, or learn about tankless maintenance.
Request a Navien installation estimate or service visit
Tell us about your home in Kane County, the equipment you have and whether you need installation, repair or maintenance. GSHA will confirm service availability and the next step for your address.
Open GSHA Online BookingCall (224) 220-3660
For an installation assessment, we review the existing equipment and the work needed before providing a written quote. If you need help choosing a service, call our office.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and a Navien Service Specialist for water heaters and boilers. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Navien water heaters and boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Kane County (05000US17089) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17089 (accessed 2026-10-23)
- 2020 Census population, Kane County (as cited on the GSHA Lennox Kane County page) — https://gshaservices.com/lennox/kane-county-il/ (accessed 2026-10-23)
- Navien Installer/Service Locator — https://www.navieninc.com/installers (accessed 2026-10-23)
- Navien NPE-A2 Series — https://www.navieninc.com/series/npe-a2 (accessed 2026-10-23)
- Navien NPE-S2 Series — https://www.navieninc.com/series/npe-s2 (accessed 2026-10-23)
- Navien NCB-H Series — https://www.navieninc.com/series/ncb-h (accessed 2026-10-23)
- Navien NFC-H Series — https://www.navieninc.com/series/nfc-h (accessed 2026-10-23)
- Navien NHB-H Series — https://www.navieninc.com/series/nhb-h (accessed 2026-10-23)
- Navien NFB-H Series — https://www.navieninc.com/series/nfb-h (accessed 2026-10-23)
- Navien NPF Series — https://www.navieninc.com/series/npf (accessed 2026-10-23)
- Navien NaviLink — https://www.navieninc.com/accessories/navilink (accessed 2026-10-23)
- City of Geneva – Water Heater Replacement Permit Information (rev. 5-1-2026) — https://www.geneva.il.us/DocumentCenter/View/31 (accessed 2026-10-23)
- City of Geneva – Furnace/Air Conditioner/HVAC Replacement handout — https://www.geneva.il.us/DocumentCenter/View/14/Furnace-and-Air-Conditioner (accessed 2026-10-23)
- City of St. Charles – Building Permits FAQs — https://www.stcharlesil.gov/Services/Forms-Permits-Applications/Building-Permits/Building-Permits-FAQs (accessed 2026-09-16, via GSHA Lennox Kane County page)
- City of Batavia – Building Permit Applications — https://www.bataviail.gov/o/ed/page/building-permit-applications (accessed 2026-09-16, via GSHA Lennox Kane County page)
- City of Elgin – Local HVAC Amendments, Ordinance G15-25 — https://elginil.gov/DocumentCenter/View/830/Local-HVAC-Amendments (accessed 2026-09-16, via GSHA Lennox Kane County page)
- City of Elgin – Permits — https://elginil.gov/2614/Permits (accessed 2026-09-16)
- Kane County Building & Zoning Division — https://www.kanecountyil.gov/FDER/Pages/Development/Building%26ZoningDivision.aspx (accessed 2026-10-23)
- Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
- Nicor Gas rebate FAQ — https://www.nicorgas.com/ways-to-save/residential-savings/rebates/rebate-faq.html (accessed 2026-09-16)
- Nicor Gas – Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-10-23)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
