Authorized Weil-McLain dealer · Cook County, IL

Authorized Weil-McLain Dealer Serving Cook County, IL

GSHA Services, LTD is an authorized Weil-McLain dealer and installer serving Cook County’s northern, northwestern and near-western suburbs, plus Tinley Park and Lemont. We have no office in Cook County: most Cook County work is dispatched from our Lake Bluff office in Lake County, and the county’s northwest edge is handled from Woodstock. Every Weil-McLain boiler job includes the heat-loss calculation or steam radiation survey, removal of the old boiler, near-boiler piping, gas piping, chimney or vent work, condensate, electrical work by GSHA’s own licensed electricians, the municipal or county permit and inspection, combustion testing, start-up and a walkthrough.

Cook County housing is the oldest we serve, which makes it boiler country. The median home was built in 1961, about 28 percent of housing units date from 1939 or earlier, and about 73 percent were built before 1980 (U.S. Census Bureau, ACS 2020-2024). Natural gas heats about 80 percent of occupied homes, electricity about 16 percent and propane only about 1.5 percent. In the pre-war suburbs that means a mix of hot-water radiator systems, steam systems and two-flats and small buildings where one boiler heats several units, and three different gas utilities with three different sets of rebate rules.

Request a free installation estimateCall (224) 220-3660

Weil-McLain cast iron gas boiler with draft hood, chimney vent, circulator and expansion tank installed by GSHA Services, LTD in Hampshire, IL
A chimney-vented Weil-McLain cast iron boiler installed by GSHA crews (Hampshire, IL), the kind of like-for-like replacement common in older Cook County homes.

Communities we serve in Cook County

GSHA’s service-area ZIP list covers Arlington Heights, Palatine, Des Plaines, Park Ridge, Mount Prospect, Prospect Heights, Wheeling, Rolling Meadows, Elk Grove Village, Schaumburg, Hoffman Estates and Streamwood in the northwest suburbs; Glenview, Northbrook, Morton Grove, Golf, Skokie, Wilmette, Kenilworth, Winnetka and Glencoe to the north; Franklin Park, Schiller Park, River Grove, Melrose Park, Hillside, Berkeley, Broadview and Westchester to the near west; and Tinley Park and Lemont to the south.

Some of these cross county lines, which changes the permit office rather than the scheduling: Barrington and Buffalo Grove are partly in Lake County, Bartlett in DuPage and Kane, Hanover Park in DuPage, Lemont in DuPage and Will, Tinley Park in Will, and Elgin’s Hanover Township portion is in Cook; Palatine is partly in Lake County and Schaumburg partly in DuPage.

Only some City of Chicago ZIP codes are on the list. GSHA crews have worked at Chicago addresses, but city coverage is confirmed address by address, as it is for Cicero, Berwyn, Matteson and Richton Park. The full ZIP-code list is on the GSHA service area page; if your ZIP is missing, call (224) 220-3660.

Weil-McLain boiler guidance for Cook County homes

Steam: the first question in a pre-war house. In the older parts of Park Ridge, Wilmette, Winnetka, Glencoe, Kenilworth, Skokie and the near-west suburbs, many houses still heat with steam. A condensing boiler is a hot-water appliance, so the replacement for a steam boiler is another steam boiler. Weil-McLain’s EG Series 7 is a cast iron gas boiler rated for water or steam, with net AHRI steam ratings from 47 MBH (196 square feet of radiation) on the EG-30 to 176 MBH (733 square feet) on the EG-75, configured for natural gas with intermittent electronic ignition and an automatic vent damper. For an oil-fired steam house, the SGO Series 4 covers 0.95 to 2.55 GPH. A steam boiler is sized from the connected radiation, so GSHA measures every radiator and checks the near-boiler piping, the main vents and the water line, which often matter as much as the boiler itself. One rebate note: the Peoples Gas and North Shore Gas steam boiler measure requires 82.5% AFUE or higher, and Weil-McLain rates the EG at 82% on steam, so it falls just short.

Hot-water radiators: condensing or cast iron. For a hot-water radiator system, the choice is between a like-for-like cast iron boiler on the chimney and a condensing boiler that vents through the wall or roof. The CGa Series 4 (84% AFUE, natural draft, 38 to 233 MBH) is the chimney-vented choice, and GSHA publishes its installed-from prices on our Weil-McLain prices page. The condensing choices are the GV90+ (91.0 to 91.9% AFUE, cast iron primary with stainless condensing secondary), the modulating Ultra Gas Series 4 (up to 94.1% AFUE on sizes 80 through 299) and the wall-hung ECO Tec and AquaBalance (95% AFUE). Peoples Gas and North Shore Gas note on their 2026 application that a condensing boiler delivers its rated efficiency only if return water is cold enough to condense the flue gases, and they require active outdoor-air reset unless supply temperatures never need to exceed 140°F, so GSHA inventories the radiators and sets the reset curve to the house.

Two-flats and small buildings. More than half of Cook County’s housing units are in buildings with two or more units, and in the older near-west and north suburbs a single boiler often heats a two-flat or a small building. The Ultra Gas Series 4 runs from 80 to 399 MBH, and its U-Control can manage one to three setpoints for single or multiple zones and control multiple boilers from one panel. For larger cast iron steam or hot-water loads, the EG-75 reaches 282 MBH input. GSHA sizes these from a building heat loss and, on steam, the total connected radiation.

Northwest suburbs: smaller hot-water systems. In Arlington Heights, Palatine, Mount Prospect, Schaumburg and Hoffman Estates, most 1960s to 1980s homes are forced air, but where a boiler serves baseboard or radiant floors, a compact AquaBalance Series 2 (80 to 155 MBH, 95% AFUE) or an ECO Tec fits a small mechanical room. A Weil-McLain combi (ECO Tec C, AquaBalance C or Simplicity) can replace both the boiler and the tank water heater, which is also what the Peoples Gas and North Shore Gas two-in-one tier requires.

Permits, utilities and installation considerations

Boiler permits

Nearly every Cook County address is inside a municipality that issues its own permits; the Cook County Department of Building and Zoning covers only unincorporated areas and cannot process permits for Chicago or incorporated suburbs (e-Permits). GSHA applies for the permit, supplies the equipment sheets and meets the inspector.

  • Arlington Heights lists “Boiler Replacement” and “Water Heater Replacement” as over-the-counter permits, applied for through the Civic Access portal.
  • Palatine requires a permit for “replacing or installing an air conditioning, heating unit or water heater” (when a permit is required); its Express permit system handles many replacement projects online.
  • Des Plaines takes applications through its Customer Self Service portal (Building and Permits), and Park Ridge schedules inspections with a one-to-two-working-day wait (Permits and Inspections); GSHA confirms each city’s boiler submittals when it files.
  • City of Chicago (confirm your address first) does not require a permit for repairing or replacing a boiler in kind, or an element of its heating system such as a radiator, in a residential building up to four stories (Department of Buildings). A cast iron EG or CGa replacing a similar cast iron boiler may fall under that rule; a condensing boiler replacing a chimney-vented cast iron boiler is a different type of installation, so GSHA confirms the permit path with the Department of Buildings.
  • Unincorporated Cook County permits through the County’s Department of Building and Zoning.

Chimneys and venting in older buildings

In a pre-war house the masonry chimney often served the boiler and the water heater together. When a CGa or EG goes back on it, GSHA inspects the flue and lines it if needed. When a condensing boiler leaves it, the gas water heater may be left venting alone into a flue sized for two appliances; Peoples Gas and North Shore Gas already require a chimney liner when a high-efficiency furnace orphans a water heater, and GSHA applies the same check to a boiler replacement. Condensing boilers vent through PVC, CPVC, polypropylene or stainless steel as Weil-McLain lists, and on tight lots with neighboring buildings close by, the termination location and clearances are worked out before the permit is filed. Condensate is neutralized before it reaches a drain.

Utilities and rebates

The rebate depends on the utility on your bill. Nicor Gas serves most Cook suburbs on GSHA’s list, Peoples Gas serves Chicago, and North Shore Gas serves the communities from Winnetka north; along the north shore GSHA confirms the gas utility from the bill. ComEd is the electric utility everywhere except Winnetka, which has its own municipal electric department; that does not affect gas boiler rebates. For 2026:

  • Peoples Gas and North Shore Gas share one HVAC and Water Heating application: hot-water boilers up to 300 MBh at 90% or 95% AFUE (the GV90+ and Ultra Gas meet the 90% tier; the ECO Tec, AquaBalance and Simplicity meet 95%); steam boilers at 82.5% AFUE or higher; two-in-one units at 90% or 95% AFUE replacing both a gas boiler and a gas storage water heater; and indirect water heaters paired with a condensing, modulating boiler. Boilers need active outdoor-air reset unless supply temperatures never need to exceed 140°F, and applications are due within 30 days of installation or by December 31, 2026.
  • Nicor Gas lists boilers at 95% AFUE and above under 300 MBTUH (the ECO Tec, AquaBalance and Simplicity) and a combination-boiler measure requiring 95% AFUE, sealed combustion, modulation and a programmed outdoor reset control. Install in 2026 and claim within 90 days or by January 31, 2027.

Check current eligibility with your gas utility, and ask GSHA which programs your equipment qualifies for.

Gas, electrical and what GSHA handles

GSHA checks the meter and piping against the new boiler’s input, installs a new gas valve and any larger piping, near-boiler piping and circulators, the expansion tank and air separation (or the steam header, equalizer and Hartford loop on steam), venting or chimney liner, the condensate neutralizer and outdoor reset sensor, and its own licensed electricians make the electrical connection. Financing is described on GSHA’s financing page.

Recent GSHA work in Cook County

GSHA crews have recently worked in Arlington Heights, Palatine, Des Plaines, Mount Prospect, Glenview, Wheeling, Schaumburg and Hoffman Estates, and in Barrington and Bartlett on the county’s edges; jobs at individual Chicago addresses and in suburbs outside the ZIP list are confirmed case by case.

Weil-McLain products we install in Cook County

The same Weil-McLain lineup is available county-wide. Featured models, ratings and published prices are on the main Weil-McLain dealer page.

EG steam/water

Cast iron steam boiler for pre-war radiator systems.

Featured: EG-30 to EG-75

Explore the EG
Weil-McLain CGa cast iron gas boiler

CGa and CGi

Chimney-vented cast iron hot-water boilers.

Featured: CGa-25 to CGa-8, CGi-25 to CGi-8

Explore the CGa
Weil-McLain GV90+ gas boiler

GV90+

91% AFUE; meets the Peoples Gas and North Shore Gas 90% tier.

Featured: GV90+3 to GV90+6

Explore the GV90+

Ultra and AquaBalance

Ultra Gas up to 399 MBH for two-flats; compact AquaBalance.

Featured: ULTRA-80 to ULTRA-399, AB-80H to AB-155H

Explore Ultra and AquaBalance

ECO Tec

95% AFUE wall-hung condensing boiler.

Featured: ECO Tec 80-H to 199-H

Explore ECO Tec

Combi-boilers

Two-in-one heat and hot water from one unit.

Featured: ECO Tec C, AquaBalance C, Simplicity

Explore combis

Oil boilers

SGO for oil-fired steam; WGO and WTGO for hot water.

Featured: SGO, WGO, WTGO

Explore oil boilers

Indirect water heaters

Aqua Plus and Aqua Pro; an indirect measure with Peoples Gas and North Shore Gas.

Featured: Aqua Plus, Aqua Pro

Explore indirect tanks

Current Weil-McLain offers

Ask GSHA about current Weil-McLain offers.

Each Weil-McLain offer names its own models and dates; tell us when you plan to install and we will say which applies. Financing through Synchrony and Service Finance is on our financing page.

Utility rebates run separately; check current eligibility with Nicor Gas, Peoples Gas or North Shore Gas.

Questions and answers

Do you install Weil-McLain boilers in Chicago?

Case by case. Only some City of Chicago ZIP codes are on GSHA’s published service-area list, and our crews have worked at Chicago addresses; call (224) 220-3660 to confirm yours.

Do I need a permit to replace a boiler in Chicago?

The Department of Buildings does not require a permit to repair or replace a boiler in kind, or an element of its heating system such as a radiator, in a residential building up to four stories. A condensing boiler replacing a cast iron chimney-vented boiler is a different type of installation, so GSHA confirms the permit path before work starts.

Is a boiler replacement an over-the-counter permit in Arlington Heights?

Yes. Arlington Heights lists boiler replacement and water heater replacement among its over-the-counter permits through the Civic Access portal.

We have steam radiators in Wilmette. Which Weil-McLain boiler fits?

Usually the EG Series 7, a cast iron gas boiler rated for steam, sized from the measured radiation. Condensing boilers are for hot-water systems. GSHA also checks the near-boiler piping and main vents, which often decide how well a steam system works.

Does the EG qualify for a North Shore Gas or Peoples Gas steam rebate?

Not under the 2026 steam boiler measure, which requires 82.5% AFUE or higher; Weil-McLain rates the EG at 82% on steam. Check current eligibility with your utility.

Which Weil-McLain boilers fit the Peoples Gas or North Shore Gas hot-water tiers?

The GV90+ (91.0 to 91.9% AFUE) and Ultra Gas Series 4 (up to 94.1%) meet the 90% tier, and the ECO Tec, AquaBalance and Simplicity (95%) meet the 95% tier. Active outdoor-air reset is required unless supply temperatures never need to exceed 140°F.

One boiler heats our two-flat. Can you replace it?

Yes. GSHA sizes a two-flat boiler from a building heat loss or, on steam, the connected radiation. The Ultra Gas Series 4 runs up to 399 MBH and can manage multiple zones, and the EG reaches 282 MBH for cast iron steam or hot water.

Do you service Weil-McLain boilers installed by others?

Yes. GSHA repairs and maintains Weil-McLain boilers from any installer, including discontinued models. Call (224) 220-3660.

More Weil-McLain pages

Weil-McLain Authorized Dealer in Illinois (main page) · Weil-McLain boilers: prices and installation cost · Best gas boiler brands for older homes · Boiler installation · Boiler repair & maintenance

Other counties

Request a free Weil-McLain installation estimate

Tell us about your home and the boiler you are considering in Cook County. We will follow up to schedule a free, no-obligation in-home visit, calculate the heat loss or survey your steam radiation, check the existing chimney or venting, gas supply, piping and electrical, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA comfort advisor checks the existing boiler and system and explains the Weil-McLain options that fit.

Written quote

You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Weil-McLain dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Weil-McLain boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Cook County (05000US17031) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17031 (accessed 2026-10-23, via GSHA Navien Cook County page)
  2. Share of Cook County housing units in multi-unit buildings, as cited on the GSHA Lennox Cook County page — https://gshaservices.com/lennox/cook-county-il/ (accessed 2026-10-23)
  3. Weil-McLain EG Series 7 Gas Boiler — https://www.weil-mclain.com/products/eg-series-7-gas-boiler/ (accessed 2026-10-23)
  4. Weil-McLain SGO Series 4 Oil-Fired Steam Boiler — https://www.weil-mclain.com/products/sgo-series-4-oil-fired-steam-boiler/ (accessed 2026-10-23)
  5. Weil-McLain CGa Gas Boiler Series 4 — https://www.weil-mclain.com/products/cga-gas-boiler-series-4/ (accessed 2026-10-23)
  6. Weil-McLain GV90+ Gas Boiler — https://www.weil-mclain.com/products/gv90-gas-boiler/ (accessed 2026-10-23)
  7. Weil-McLain Ultra Gas Boiler Series 4 — https://www.weil-mclain.com/products/ultra-s4-gas-boiler/ (accessed 2026-10-23)
  8. Weil-McLain ECO Tec Gas Boiler Series 3 — https://www.weil-mclain.com/products/eco-tec-boiler-3/ (accessed 2026-10-23)
  9. Weil-McLain AquaBalance Series 2 — https://www.weil-mclain.com/products/aquabalance-series-2/ (accessed 2026-10-23)
  10. Weil-McLain Simplicity Gas Combi Boiler — https://www.weil-mclain.com/products/simplicity-gas-combi-boiler/ (accessed 2026-10-23)
  11. Village of Arlington Heights – Over the Counter Permits — https://www.vah.com/over_the_counter_permits/index.php (accessed 2026-10-23, via GSHA Navien Cook County page)
  12. Village of Palatine – When a Building Permit is Required — https://www.palatine.il.us/621/When-a-Building-Permit-is-Required (accessed 2026-10-23)
  13. Village of Palatine – Express Building Permits — https://www.palatine.il.us/609/Express-Building-Permits (accessed 2026-10-23)
  14. City of Des Plaines – Building and Permits — https://www.desplainesil.gov/Departments/Community-and-Economic-Development/Building-and-Permits (accessed 2026-09-16)
  15. City of Park Ridge – Permits and Inspections — https://www.parkridge.us/your_government/city_departments/permits_and_inspections_2.php (accessed 2026-10-23)
  16. City of Chicago Department of Buildings – mechanical work not requiring a permit — https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/help/faq/DOB/bldg-permit-not-required/worktype/mechanical.html (accessed 2026-10-23, via GSHA Navien Cook County page)
  17. Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-09-16)
  18. Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (accessed 2026-09-16)
  19. Peoples Gas HVAC and Water Heating Application 2026 — https://www.peoplesgasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23)
  20. Peoples Gas residential rebates — https://www.peoplesgasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
  21. North Shore Gas residential rebates — https://www.northshoregasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
  22. Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
  23. GSHA Weil-McLain Boilers Prices and Installation Cost page — https://gshaservices.com/hvac-services-illinois-wisconsin/boiler-installation/weil-mclain-boilers-prices/ (accessed 2026-10-23)
  24. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
  25. GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)