Authorized MagicPak Dealer · Cook County, IL

MagicPak Dealer Serving Cook County, IL

GSHA Services, LTD is an authorized MagicPak dealer and installer serving condominium owners, apartment owners, associations and property managers in Cook County’s northern, northwestern and near-western suburbs, plus Tinley Park and Lemont. We have no office in Cook County; most Cook County work is dispatched from our Lake Bluff office and the county’s northwest edge from Woodstock. Our own crews and licensed electricians handle the whole MagicPak replacement, from measuring the closet and wall opening to the permit and start-up.

Cook County is where multi-unit living is the norm rather than the exception. Of about 2.28 million housing units, roughly 1.23 million (54.2 percent) are in buildings with two or more homes, and about 457,000 (20.1 percent) are in buildings of 20 or more units (U.S. Census Bureau, American Community Survey 2020-2024). With a 1961 median build year, many of these buildings have been through several generations of heating and cooling equipment, and all-in-one through-the-wall units are a common way to give each home its own system without condensers on the roof or balconies.

Request a free installation estimateCall (224) 220-3660

MagicPak M-Series single packaged vertical unit cabinet

Communities we serve in Cook County

GSHA’s service-area ZIP list covers Arlington Heights, Palatine, Des Plaines, Park Ridge, Mount Prospect, Prospect Heights, Wheeling, Rolling Meadows, Elk Grove Village, Schaumburg, Hoffman Estates and Streamwood in the northwest suburbs; Glenview, Northbrook, Morton Grove, Golf, Skokie, Wilmette, Kenilworth, Winnetka and Glencoe to the north; Franklin Park, Schiller Park, River Grove, Melrose Park, Hillside, Berkeley, Broadview and Westchester to the near west; and Tinley Park and Lemont to the south. Barrington, Buffalo Grove, Bartlett, Hanover Park and Elgin cross into neighboring counties.

Only some City of Chicago ZIP codes are on the list, so Chicago owners and associations should confirm their address with GSHA first; the same applies to Cicero, Berwyn and other suburbs not on the list. The full list is on the GSHA service area page.

Multi-unit housing in Cook County

The Census units-in-structure table counts every housing unit, occupied or vacant, county-wide, including Chicago. It does not identify which buildings use MagicPak units, but it shows the scale of multifamily housing here.

Type of structureHousing unitsShare
One unit, detached900,82439.6%
One unit, attached (townhomes, rowhouses)124,0815.5%
Buildings with 2 to 4 units441,00019.4%
Buildings with 5 to 19 units335,09114.7%
Buildings with 20 or more units456,75120.1%

Source: U.S. Census Bureau, ACS 2020-2024 5-year estimates, table B25024, Cook County. Mobile homes and other types make up the remainder.

Cook is the only county we serve where detached houses are a minority of homes. The suburbs on our list have a different mix from the city, with more mid-sized condominium buildings and townhome developments, but the pattern holds: many owners share walls, a roof and a facade with neighbors, and decisions about the exterior belong to an association. On heating fuel, about 80 percent of occupied homes county-wide heat with utility gas, about 16 percent with electricity and about 1.5 percent with propane (ACS 2020-2024, table B25040); electric heat is common in apartment and condominium buildings, so we confirm what each unit uses.

MagicPak guidance for Cook County homes

Gas units. For a unit with its own gas line and flue, the MGE9 (95% AFUE, up to 11.7 SEER2) and MGE8 (80% AFUE, up to 13.4 SEER2, 0.75 to 3.0 tons) are MagicPak’s current M-Series gas options. The MGE9’s FreezeShield circulates flue gas to keep condensate from freezing, its stainless steel five-pass primary heat exchanger carries MagicPak’s 20-year limited warranty, and its sealed burner box isolates combustion from the surrounding closet. The telescoping flue adjusts for wall thickness, which matters in older masonry buildings.

All-electric buildings. With about 16 percent of occupied homes heating with electricity, many Cook County condominiums are all-electric. The MHP heat pump (up to 13.4 SEER2 and 6.7 HSPF2, with 3 to 10 kW of electric heat) and the MCE (0 to 10 kW electric heat, up to 13.4 SEER2) are the choices. In Winnetka, where electricity comes from the village’s own utility, ComEd programs do not apply.

Older buildings. In a 1960s or 1970s building, the closet may hold a unit that was already a replacement for something else. We record what is there now, measure the opening, sleeve and louver, and check MagicPak’s current literature so the quote is clear about whether the opening can be reused.

Sound and vibration. In stacked units, a closet unit can transmit vibration to the floor or wall it sits on. Correct setting of the cabinet, sealed duct connections and a clear return path keep the unit quiet for you and your neighbors.

Working in mid-rise and larger buildings

One in five Cook County homes is in a building of 20 or more units. A MagicPak replacement in a building that size is planned around the building as much as the unit:

  • Building rules first. Management companies commonly set work hours, require an elevator or loading-dock reservation and ask for the contractor’s certificate of insurance before work starts. We ask for the building’s contractor rules when we schedule the estimate.
  • Moving equipment. An all-in-one cabinet is a single heavy piece. We plan how it travels through the lobby, elevator and hallway and protect finishes along the way, and we remove the old unit the same way.
  • Exterior access. On upper floors the louver is reached from inside. Where the sleeve or louver needs work that cannot be done from inside, we discuss it with the association, which controls access to the exterior.
  • Consistency. Boards often want every unit in the building replaced to the same standard. We can survey a sample of units and write a standard scope naming the MagicPak model family, louver finish and how the opening is finished.
  • Records. We provide model and serial numbers, the permit and installation date for each unit, which helps the association plan future replacements.

Whether an owner needs association approval, and what the board controls, is set by the building’s declaration, bylaws and rules. Ask your board or manager first, and we will supply what they request.

Before you call: what speeds up a Cook County quote

Cook County MagicPak jobs move fastest when we know a few things before the estimate. None of this is required, but each item saves a step:

  • The existing nameplate. A photo of the label inside the closet door or on the cabinet, showing brand, model and serial number, tells us the age and type of unit and what opening it uses.
  • Gas or electric. Whether your unit has a gas line and flue, or runs on electricity only. Your utility bills answer this if you are unsure.
  • Your gas and electric utilities. Nicor Gas, Peoples Gas or North Shore Gas, and ComEd or the Village of Winnetka, from your bills. This decides which incentive programs we check.
  • Building rules. The management company’s contractor rules: work hours, elevator reservations, insurance certificate requirements and any approval form for HVAC replacements.
  • Association requirements. Whether the board specifies a louver color or finish, or a particular replacement standard.
  • Floor and access. Which floor the unit is on and whether there is an elevator, so we plan how to move a single heavy cabinet in and the old one out.

Send what you have with the estimate form or by email to info@gshaservices.com, and we will gather the rest at the visit.

Permits, utilities and installation considerations

Permits

Nearly every Cook County address is inside a municipality that issues its own HVAC permit; the Cook County Department of Building and Zoning covers only unincorporated areas and Forest Preserve land (e-Permits). GSHA applies for the permit and meets the inspector. Fees below are as each municipality published them; GSHA confirms the current fee when it applies.

  • Arlington Heights lists Furnace Replacement among its over-the-counter permits through the Civic Access portal; the furnace guide needs the contractor’s proposal.
  • Palatine requires a permit for replacing or installing an air conditioning or heating unit (when a permit is required); replacements are Express permits filed online, and the 2026 furnace handout lists a $103 fee per item, a possible five-day plan review, a final inspection with access to the electrical panel, and an emergency same-location start if the application is filed within one business day.
  • Des Plaines takes applications through its Customer Self Service portal (Building and Permits); City Code 10-13-3 lists HVAC/Mechanical (remove/replace) at $75 for one- and two-family homes, so fees for units in larger buildings may differ.
  • Park Ridge requires a permit for heating and air conditioning work and schedules inspections with a normal one-to-two-working-day wait (Permits and Inspections).
  • Unincorporated Cook County uses an HVAC permit application that asks for the old and new equipment’s make, model and AFUE or SEER, a justification if capacity changes by more than 15 percent, and a Cook County-registered HVAC contractor.
  • City of Chicago (confirm your address with GSHA first) exempts only an in-kind replacement of a furnace or air conditioner, of the same type, size and shape, in a residential building up to four stories; anything else needs a permit (Department of Buildings).

None of these pages sets a separate rule for through-the-wall packaged units, so GSHA files a MagicPak as a heating and cooling replacement and confirms with the department where a requirement written for split systems, such as an AC site plan, does not fit.

Utilities and incentives

Nicor Gas serves most Cook suburbs on our list, Peoples Gas serves Chicago, and North Shore Gas serves the communities from Winnetka north; along the north shore we confirm the gas utility from your bill. ComEd is the electric utility everywhere except Winnetka. Nicor Gas tiers furnace rebates at 95 and 97 percent AFUE; Peoples Gas and North Shore Gas share an application with the same AFUE tiers, a short filing window after installation and a sealed-combustion requirement. Whether a gas packaged unit such as the 95% AFUE MGE9 qualifies under those furnace programs is set by each utility’s equipment rules, so we check before you count on it. Rental owners on Nicor with three or more units can look at Nicor’s Multi-Family Savings program. ComEd advertises heat pump discounts through its contractor network, subject to eligibility and funding. Check current eligibility with your utilities.

Gas, electrical and condensate

GSHA reconnects or extends the gas piping with a shut-off at the unit, and our licensed electricians verify the circuit, breaker and disconnect against the new nameplate; Palatine’s final inspection includes access to the electrical panel, so we arrange that with you. We confirm each unit’s condensate drain, which in stacked buildings often ties into a shared riser, and keep winter condensate from a condensing MGE9 flowing.

MagicPak products we install in Cook County

The full MagicPak line is available county-wide. Specs are on the main MagicPak page.

Cutaway of a MagicPak gas heat and electric cooling M-Series unit

MGE9 and MGE8 gas/electric

95% AFUE MGE9 with FreezeShield, or the 80% AFUE MGE8.

GSHA MGE product page

V-Series, sleeves and louvers

V-Series HWC and EWC units, wall sleeves and louvers.

All MagicPak products

Current MagicPak offers

Ask GSHA about current MagicPak offers.

Financing programs available through GSHA are on our financing page. Utility incentives run separately; check current eligibility with your gas utility and ComEd.

Questions and answers

Does a like-for-like MagicPak replacement in Chicago need a permit?

Chicago’s Department of Buildings exempts only an in-kind replacement of a furnace or air conditioner of the same type, size and shape in a residential building up to four stories. A taller building, or a replacement that changes type, size or shape, needs a permit. Only some Chicago ZIP codes are on our ZIP list, so confirm your address with us first.

How fast can a failed unit be replaced in Palatine?

Palatine’s 2026 handouts allow an emergency same-location start if the permit application is filed within one business day, and mention a possible five-day plan review otherwise. We explain the options when you call.

Our board wants all 80 units replaced to one standard. Can GSHA help?

Yes. We survey a sample of units, write a standard scope with the MagicPak model family and louver finish, and schedule replacements to suit the building’s rules.

Which gas utility am I on in Wilmette or Winnetka?

It varies along the north shore, so check your bill. North Shore Gas serves communities from Winnetka north, but Nicor’s list also names Winnetka, Wilmette and Kenilworth. Winnetka also has its own electric utility.

Is the condensing MGE9 suitable for a high-rise?

It can be, if the building has a condensate path that works year-round. MagicPak’s FreezeShield protects the unit’s own condensate system; we check the building’s drain before recommending the MGE9 over the MGE8.

What does the permit cost for a condo unit in Des Plaines?

Des Plaines City Code lists HVAC/Mechanical remove-and-replace at $75 for one- and two-family homes. A unit in a larger building may fall under a different fee category, so GSHA confirms the fee with the city when it applies for the permit and shows it on your quote.

Can I replace my MagicPak with a split system instead?

Sometimes, but in most multi-unit buildings there is nowhere for an outdoor condenser and the association controls the roof and exterior. A through-the-wall replacement uses the opening you already have, which is why most owners stay with an all-in-one unit.

Do you service MagicPak units in Cook County that GSHA did not install?

Yes, within our service area. Call (224) 220-3660.

More MagicPak pages

MagicPak authorized dealer in Illinois (main page) · Magic-Pak package units · MGE · MHP · MCE

Other counties

Request a free MagicPak installation estimate

Tell us about your home and the unit you are replacing in Cook County. We will follow up to schedule a free, no-obligation visit, measure the closet and wall opening, check the vent, gas, electrical and ductwork, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

On-site visit

A GSHA comfort advisor measures the unit, checks the existing installation and explains the MagicPak options that fit.

Written quote

You receive an itemized quote with the equipment, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized MagicPak dealer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. MagicPak M-Series overview — https://www.magicpak.com/products/m-series (accessed 2026-10-23)
  2. MagicPak MGE9 — https://www.magicpak.com/products/m-series/mge9 (accessed 2026-10-23)
  3. MagicPak MGE8 — https://www.magicpak.com/products/m-series/mge8 (accessed 2026-10-23)
  4. MagicPak MHP — https://www.magicpak.com/products/m-series/mhp (accessed 2026-10-23)
  5. MagicPak MCE — https://www.magicpak.com/products/m-series/mce (accessed 2026-10-23)
  6. MagicPak warranty — https://www.magicpak.com/products/warranty (accessed 2026-10-23)
  7. Census Reporter, ACS 2020-2024 5-year, table B25024 Units in Structure, Cook County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25024&geo_ids=05000US17031 (accessed 2026-10-23)
  8. Census Reporter, ACS 2020-2024 5-year, tables B25040 and B25035, Cook County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035&geo_ids=05000US17031 (accessed 2026-10-23)
  9. Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-09-16)
  10. Cook County HVAC Permit Application — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/documents/2022-03/HVAC%20Permit%20Application%202022.pdf (accessed 2026-09-16)
  11. Village of Arlington Heights – Over-the-counter permits — https://www.vah.com/over_the_counter_permits/index.php (accessed 2026-09-16)
  12. Village of Arlington Heights – Furnace Replacement guide — https://www.vah.com/HVAC%20-%20Furnace%20-%20Replacement.pdf (accessed 2026-09-16)
  13. Village of Palatine – When a Building Permit is Required — https://www.palatine.il.us/621/When-a-Building-Permit-is-Required (accessed 2026-09-16)
  14. Village of Palatine – Express Building Permits — https://www.palatine.il.us/609/Express-Building-Permits (accessed 2026-09-16)
  15. Village of Palatine – Furnace Replacement handout (2026) — https://www.palatine.il.us/DocumentCenter/View/2515/Furnace-Replacement-PDF (accessed 2026-09-16)
  16. City of Des Plaines – Building and Permits — https://www.desplainesil.gov/Departments/Community-and-Economic-Development/Building-and-Permits (accessed 2026-09-16)
  17. Des Plaines City Code 10-13-3 — https://codelibrary.amlegal.com/codes/desplainesil/latest/desplaines_il/0-0-0-6936 (accessed 2026-09-16)
  18. City of Park Ridge – Permits and Inspections — https://www.parkridge.us/your_government/city_departments/permits_and_inspections_2.php (accessed 2026-09-16)
  19. City of Chicago Department of Buildings – mechanical work not requiring a permit — https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/help/faq/DOB/bldg-permit-not-required/worktype/mechanical.html (accessed 2026-09-16)
  20. Nicor Gas Residential Rebates — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
  21. Nicor Gas Multi-Family Savings — https://www.nicorgas.com/ways-to-save/multi-family-savings.html (accessed 2026-10-23)
  22. Peoples Gas Residential Rebates — https://www.peoplesgasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
  23. North Shore Gas Residential Rebates — https://www.northshoregasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
  24. ComEd Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
  25. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)