Authorized MagicPak Dealer · DuPage County, IL

MagicPak Dealer Serving DuPage County, IL

GSHA Services, LTD is an authorized MagicPak dealer and installer serving condominium owners, apartment owners, townhome associations and property managers across DuPage County. We have no office in DuPage; crews come from our offices in Woodstock (McHenry County) and Lake Bluff (Lake County). One company handles the whole replacement: measuring the closet and wall opening, the MagicPak unit, gas piping, the through-wall vent and condensate drain, electrical work by our own licensed electricians, the village permit and inspection, and start-up.

DuPage is the most multifamily county we serve outside Cook. Of about 367,200 housing units, roughly 107,800 (29.4 percent) are in buildings with two or more homes, split almost evenly between 5-to-19-unit buildings (about 45,000) and buildings of 20 or more (about 45,700), and another 43,500 (11.8 percent) are single-family attached homes (U.S. Census Bureau, American Community Survey 2020-2024). With a 1978 median build year, many of those buildings are on their second or third generation of through-the-wall equipment.

Request a free installation estimateCall (224) 220-3660

MagicPak M-Series single packaged vertical unit cabinet

Communities we serve in DuPage County

GSHA’s published service area includes Addison, Bensenville, Bloomingdale, Carol Stream, Elmhurst, Glen Ellyn, Glendale Heights, Itasca, Lombard, Roselle, Villa Park, Warrenville, West Chicago, Wheaton (the county seat), Winfield and Wood Dale. Aurora, Bartlett, Bolingbrook, Hanover Park, Lemont and Naperville are also on our list and straddle county lines; only the permit office and, in Naperville, the electric utility change.

Downers Grove, Woodridge, Hinsdale, Lisle, Westmont and Oak Brook are also on our ZIP list. Burr Ridge is not named on it, although its 60527 ZIP code is listed, so if your building is there, please confirm your address with GSHA at (224) 220-3660 before scheduling. The full list is on the GSHA service area page.

Multi-unit housing in DuPage County

The Census units-in-structure table counts every housing unit, occupied or vacant. It does not identify MagicPak buildings, but it shows how much of DuPage lives in the kind of building where all-in-one units are common.

Type of structureHousing unitsShare
One unit, detached214,44758.4%
One unit, attached (townhomes, rowhouses)43,49711.8%
Buildings with 2 to 4 units17,0594.6%
Buildings with 5 to 19 units45,04312.3%
Buildings with 20 or more units45,72012.5%

Source: U.S. Census Bureau, ACS 2020-2024 5-year estimates, table B25024, DuPage County. Mobile homes and other types make up the remainder.

Two features stand out. First, DuPage has comparatively few duplexes and fourplexes; its multi-unit homes are mostly in garden buildings and larger complexes, which usually means an association or a professional manager is involved in any replacement. Second, the county heats mostly with gas, about 83 percent of occupied homes, with about 14.7 percent on electricity and 1.1 percent on propane (ACS 2020-2024, table B25040). Electric heat is more common in apartment and condominium buildings than those county-wide figures suggest, so we confirm what each unit actually uses.

MagicPak guidance for DuPage County homes

Gas units. Nicor Gas is the gas utility named by Wheaton, Glen Ellyn and Lombard. For a gas-fed unit, MagicPak’s MGE9 (95% AFUE, up to 11.7 SEER2) and MGE8 (80% AFUE, up to 13.4 SEER2, 0.75 to 3.0 tons) are the current M-Series options. The choice has a paperwork side in DuPage: Wheaton asks for a combustion-air worksheet when the gas appliance is not high-efficiency, so an 80% AFUE MGE8 application in Wheaton carries an extra step that an MGE9 may not. The MGE9’s FreezeShield circulates flue gas to keep condensate from freezing, and its flue telescopes to suit different wall thicknesses.

Electric units. In all-electric buildings, the MHP heat pump (up to 13.4 SEER2 and 6.7 HSPF2, with 3 to 10 kW of electric heat) and the MCE (0 to 10 kW electric heat, up to 13.4 SEER2) are the choices. In Naperville, most buildings buy electricity from the city’s own utility rather than ComEd, which changes the incentive programs but not the equipment.

Thermostats. Wheaton and Lombard both call for a programmable thermostat with a furnace permit. If your existing thermostat is an old non-programmable model, we include a compatible programmable thermostat in the MagicPak quote so the permit closes cleanly.

Sizing on paper. Lombard requires a Manual J load calculation or equal on site for a furnace replacement, and Wheaton requires sizing from a load calculation. We calculate the load for the home rather than copying the old nameplate, and leave the calculation with the permit documents where the village asks for it.

What DuPage villages and associations will ask for

A MagicPak replacement in a DuPage condominium usually involves two sets of paperwork: the village’s and the association’s. We prepare both.

For the village

  • Equipment brand, efficiency and capacity, with MagicPak’s manufacturer specifications (Wheaton lists these submittals)
  • A combustion-air worksheet for a non-high-efficiency gas appliance (Wheaton)
  • The installation manual and a Manual J or equal on site at inspection (Lombard)
  • A programmable thermostat (Wheaton and Lombard)
  • Contractor registration where required, for example with the DuPage County Building Official for unincorporated addresses

For the association

  • The proposed MagicPak model and its specification sheet
  • The louver color and finish, matched to the building
  • A description of any change to the wall opening or vent termination
  • GSHA’s certificate of insurance
  • Scheduling within the building’s work hours and any elevator or loading-area reservation

Whether association approval is required, and what it covers, is set by your declaration, bylaws and rules; in many buildings the exterior wall and louver are common or limited common elements. Ask your board or manager before we schedule.

What we look for in an older DuPage condominium

Half of DuPage County’s housing was built before 1978, and many of its garden and mid-rise condominium buildings date from the 1970s and 1980s. Through-the-wall units in those buildings have usually been replaced at least once, sometimes with a different brand, so the closet you have today may not match the original design. On an estimate in an older building we check:

  • The existing unit and its history. Brand, model, serial number and age, and whether the current unit was itself a replacement that needed adapters or trim to fit.
  • Sleeve and louver condition. Rust, damaged blades or a failed seal around the sleeve let air and water in. A replacement is the right moment to deal with it, with association approval where needed.
  • Vent and clearances. On gas units, where the flue terminates at the louver and whether the new unit’s vent can use the same position.
  • Condensate route. Older buildings sometimes drain units in ways that would not be accepted today. We confirm the new unit drains to an approved path.
  • Electrical capacity. Our licensed electricians compare the existing circuit and panel with the new nameplate, which matters most when switching to a unit with more electric heat.
  • Ducts and return air. Leaky or undersized return paths make closet units noisy and inefficient; we note what can be improved within the scope of the replacement.

The written quote explains each finding and whether it affects price, so owners and boards can see why two seemingly identical units can be quoted differently.

From estimate to inspection

A typical DuPage MagicPak replacement runs in this order: free on-site estimate and load calculation; written quote naming the model; association review where your rules require it; permit application with the village or county, which in Glen Ellyn includes plan review; installation day, with the old unit removed and hauled away; start-up and a walkthrough of the filter and thermostat; and the village’s final inspection, which GSHA attends. We give you a realistic timeline at the estimate, based on your village’s permit path and the availability of the model.

Permits, utilities and installation considerations

Permits by municipality

In the DuPage municipalities checked for this page and in unincorporated DuPage County, heating and cooling replacements go through the local building department. GSHA pulls the permit and meets the inspector:

  • Wheaton. The Furnace & Air-Conditioner – Residential page lists the submittals (brand, efficiency and BTUs, manufacturer specifications, a combustion-air worksheet for a non-high-efficiency gas appliance), sizing from a load calculation, a programmable thermostat and a properly sized UL-listed breaker.
  • Glen Ellyn. The What Application to Use table makes a residential furnace, AC or heat pump replacement a Small Building Permit with Plan Review, while a gas-piping or duct change alone is an over-the-counter permit; the Work That Requires a Building Permit sheet names forced-air heating, natural gas systems and heat pumps.
  • Lombard. The Furnace Replacement Residential handout requires a permit and final HVAC inspection, the installation manual and a Manual J or equal on site, and a programmable thermostat per the energy code.
  • Downers Grove. The Permits page says most projects require a permit and that applications, inspections and fees go through the online portal only.
  • Unincorporated DuPage County. The Building and Permits page lists furnace and air conditioner replacements among online permits, and contractors must be registered with the county Building Official.

These handouts are written around furnaces and split air conditioners. A MagicPak is both in one cabinet, so we file it as a heating and cooling replacement and confirm with the department where a requirement, such as an AC site plan, does not fit a through-the-wall unit.

The wall instead of the yard

Wheaton, Lombard and Glen Ellyn regulate where an outdoor AC condenser may sit and how far it must be from property lines. A MagicPak has no outdoor condenser, so those rules rarely apply. The louver and vent on the exterior wall do matter, and keeping the existing opening is the simplest route when the new unit allows it.

Utilities and incentives

Nicor Gas and ComEd serve most of the county; confirm your address with Nicor’s service-area lookup. Most of Naperville is served by the city’s municipally owned electric utility, so ComEd residential programs do not apply to Naperville Electric customers. Nicor’s residential rebates tier furnace rebates at 95 and 97 percent AFUE; whether a gas packaged unit qualifies as a furnace under that program is set by Nicor’s equipment rules, so we check before you count on it. Rental owners with three or more units can look at Nicor’s Multi-Family Savings program. For heat pumps, check ComEd’s Home Heating & Cooling Discounts; terms change during the year. GSHA’s invoice shows the installation date, manufacturer, model number and cost these applications ask for.

Gas, electrical and condensate

GSHA reconnects and tests the gas piping to the unit, and our licensed electricians install the properly sized breaker and disconnect Wheaton calls out. In a mid-rise building we confirm where each unit’s condensate drains and that the drain stays open in winter, which matters most for a condensing MGE9.

MagicPak products we install in DuPage County

The full MagicPak line is available county-wide. Specs are on the main MagicPak page.

Cutaway of a MagicPak gas heat and electric cooling M-Series unit

MGE9 and MGE8 gas/electric

95% AFUE MGE9 with FreezeShield, or the 80% AFUE MGE8.

GSHA MGE product page

V-Series, sleeves and louvers

V-Series HWC and EWC units, wall sleeves and louvers.

All MagicPak products

Current MagicPak offers

Ask GSHA about current MagicPak offers.

Financing programs available through GSHA are on our financing page. Utility incentives run separately; check current eligibility with Nicor Gas and ComEd or Naperville Electric.

Questions and answers

Does Glen Ellyn treat a MagicPak replacement as a plan-review permit?

Glen Ellyn’s table makes a residential furnace, AC or heat pump replacement a Small Building Permit with Plan Review. A MagicPak replaces both heating and cooling, so we expect that path and allow for review time in the schedule.

Is an 80% AFUE MGE8 allowed in Wheaton?

Wheaton’s page does not prohibit it; it asks for a combustion-air worksheet when the gas appliance is not high-efficiency. GSHA prepares that worksheet with the application if an MGE8 is the right unit.

We manage a 60-unit building in Lombard. Can you replace units in phases?

Yes. We can survey the building, propose a standard scope and schedule replacements by stack or floor, with each unit permitted and inspected as Lombard requires.

Do ComEd rebates apply in Naperville?

Not for customers of Naperville’s municipal electric utility; the city runs its own programs. Nicor Gas programs still apply to Nicor customers.

Will my association need to approve the replacement?

That depends on your declaration and rules. If the louver, wall opening or vent changes, approval is likely to be needed; ask your board or manager first, and we will provide the documents they request.

What refrigerant does a new MagicPak use?

MagicPak’s current M-Series literature for the MCE, MHP and MGE is labeled R-454B, and the MHP and MCE pages describe the line as 2025 low-GWP compliant. GSHA confirms the refrigerant and availability of the exact model before quoting.

Do you service MagicPak units in DuPage that GSHA did not install?

Yes. We repair and maintain MagicPak units whoever installed them; call (224) 220-3660.

More MagicPak pages

MagicPak authorized dealer in Illinois (main page) · Magic-Pak package units · MGE · MHP · MCE

Other counties

Request a free MagicPak installation estimate

Tell us about your home and the unit you are replacing in DuPage County. We will follow up to schedule a free, no-obligation visit, measure the closet and wall opening, check the vent, gas, electrical and ductwork, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

On-site visit

A GSHA comfort advisor measures the unit, checks the existing installation and explains the MagicPak options that fit.

Written quote

You receive an itemized quote with the equipment, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized MagicPak dealer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. MagicPak M-Series overview — https://www.magicpak.com/products/m-series (accessed 2026-10-23)
  2. MagicPak MGE9 — https://www.magicpak.com/products/m-series/mge9 (accessed 2026-10-23)
  3. MagicPak MGE8 — https://www.magicpak.com/products/m-series/mge8 (accessed 2026-10-23)
  4. MagicPak MHP — https://www.magicpak.com/products/m-series/mhp (accessed 2026-10-23)
  5. MagicPak MCE — https://www.magicpak.com/products/m-series/mce (accessed 2026-10-23)
  6. Census Reporter, ACS 2020-2024 5-year, table B25024 Units in Structure, DuPage County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25024&geo_ids=05000US17043 (accessed 2026-10-23)
  7. Census Reporter, ACS 2020-2024 5-year, tables B25040 and B25035, DuPage County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035&geo_ids=05000US17043 (accessed 2026-10-23)
  8. City of Wheaton – Furnace & Air-Conditioner – Residential — https://www.wheaton.il.us/813/Furnace-Air-Conditioner—Residential (accessed 2026-09-16)
  9. Village of Glen Ellyn – What Application to Use — https://www.glenellyn.org/DocumentCenter/View/1744/WHAT-APPLICATION-TO-USE (accessed 2026-09-16)
  10. Village of Glen Ellyn – Work That Requires a Building Permit — https://www.glenellyn.org/DocumentCenter/View/2329/Work-That-Requires-A-Building-Permit- (accessed 2026-09-16)
  11. Village of Lombard – Furnace Replacement Residential — https://www.villageoflombard.org/DocumentCenter/View/122/Furnace-Replacement-Residential-PDF (accessed 2026-09-16)
  12. Village of Downers Grove – Permits — https://www.downers.us/permits (accessed 2026-09-16)
  13. DuPage County Building and Permits — https://www.dupagecounty.gov/government/departments/building_and_zoning/building_and_permits/ (accessed 2026-09-16)
  14. DuPage County contractor registration — https://www.dupagecounty.gov/government/departments/building_and_zoning/building_and_permits/contractor_registration.php (accessed 2026-09-16)
  15. City of Naperville Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
  16. Nicor Gas – Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-09-16)
  17. Nicor Gas Residential Rebates — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
  18. Nicor Gas Multi-Family Savings — https://www.nicorgas.com/ways-to-save/multi-family-savings.html (accessed 2026-10-23)
  19. ComEd Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
  20. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)