Authorized Champion dealer · Will County, IL

Champion Generator Dealer Serving Will County, IL

Will County homes are served from GSHA’s Lake Bluff office at 11 N Skokie Hwy, the nearer of our two offices for every Will County community on this page. The distances are longer here than in our other counties: roughly 42 miles straight-line to Bolingbrook, the closest, and about 56 to Shorewood. Bolingbrook, Romeoville, Homer Glen, Lockport and Plainfield fall inside our standard 50-mile radius; Joliet and the other towns in the roughly 52-to-56-mile band are quoted case by case rather than turned away. GSHA Services, LTD is an authorized Champion dealer and installer, and our own crews and licensed electricians do the work.

Will County’s own building ordinance makes the case for standby power in a way few counties do. It requires drain tile around any foundation enclosing below-grade space, connected to a sump pump, so homes built to that standard with a basement or crawl space depend on an electric pump that stops when the power does. Add private wells outside the municipal service areas and a string of damaging storms in August 2026, and the sump pump and well pump become the center of most Champion recommendations here.

Request a free installation estimateCall (224) 220-3660

Champion 22kW fleX home standby generator in its outdoor enclosure

Communities we serve in Will County

Will County is Illinois’s fourth most populous county, with 696,355 residents in the 2020 Census across 849 square miles. Distances are straight-line miles from our Lake Bluff office; populations are 2020 Census counts for the whole municipality, including any part in a neighboring county.

CommunityPopulation (2020)Miles from Lake BluffCoverage
Bolingbrook73,92241.7Inside 50-mile radius (also partly DuPage)
Romeoville39,86345.4Inside 50-mile radius
Homer Glen24,54347.1Inside 50-mile radius (also partly Cook)
Lockport26,09448.8Inside 50-mile radius
Plainfield44,76248.8Inside 50-mile radius (also partly Kendall)
Crest Hill20,45951.8Quoted case by case
Mokena19,88752.1Quoted case by case
New Lenox27,21453.3Quoted case by case
Joliet150,36253.5Quoted case by case (also partly Kendall)
Frankfort20,29654.1Quoted case by case (also partly Cook)
Shorewood18,18655.5Quoted case by case

Call (224) 220-3660 with your address and we will tell you what applies to your street, or check the ZIP list on our service area page.

Which Champion generator fits a Will County home

Essentials plus the sump: a select-circuit Champion

Will County’s sec. 150.070 requires foundation drain tile tied to a sump pump that discharges to an approved drainage facility or at least ten feet from the house, and forbids tying footing drains or sump pumps into a sanitary sewer or septic system. For a house built that way, the minimum useful generator is one that keeps the sump running with the furnace and refrigerator. The Champion 8.5 kW select-circuit system does exactly that through a 50 A outdoor switch with room for up to 12 circuits, and it is fully installed from $6,000 in GSHA’s published package. The Champion 12.5 kW (12,500 W on propane, 11,000 W on natural gas, up to 16 circuits) adds room for a well pump, a second sump or a few more rooms.

Homes on private wells

The Will County Health Department’s Environmental Health Division permits and inspects private wells and septic systems; it logged 2,010 water program activities and 138 septic permits in fiscal 2018. The county’s land-use plan steers new development toward municipalities and existing sewer and water areas, so wells are most common on rural and older unincorporated lots. A home on a well has no water without power to the pump, and the pump’s starting load is what we size around. Most well-and-sump homes land on the 12.5 kW select-circuit system, or on a whole-house unit if they also want air conditioning.

Whole-house homes in Plainfield, Bolingbrook and Homer Glen

Newer subdivision homes with central air usually fit the Champion 14 kW aXis, which Champion rates at 14,000 W on propane and 12,500 W on natural gas, lists with a 5-ton air conditioner rating, and pairs with a service-entrance switch in 150 A or 200 A. Larger homes, two-compressor homes and houses with an EV charger move to the Champion 22 kW fleX (22,000 W propane, 19,800 W natural gas; fully installed from $9,000) with a fleX Load Management Module, and we keep the sump pump off any circuit the module can shed.

Southern and rural Will County

The county’s 1998 stormwater plan notes that population is concentrated in the northwest and thins toward the south. On rural parcels beyond the gas mains, any Champion standby can run on propane, and each is rated higher on propane than on natural gas. Champion publishes full-load propane use of 1.5 gallons an hour for the 8.5 kW, 2.6 for the 12.5 kW and 3.8 for the 22 kW fleX, which is how we size the tank.

Permits, utilities and installation considerations

County or municipal permit

The Will County Building Ordinance (sec. 150.003) applies outside the limits of cities, villages and incorporated towns, so a property inside a municipality gets its generator permit from that city or village. Unincorporated properties are permitted by the Will County Land Use Department’s Building Section, 58 East Clinton Street, Suite 100, Joliet (815-727-8634), through the county’s SmartGov Public Portal. The county has adopted the 2018 International Residential Code, the 2017 National Electrical Code and the 2018 International Fuel Gas Code, with 2021 county amendments. The ordinance does not name standby generators, but sec. 150.003 requires a permit in advance for any electrical installation outside municipal limits and sec. 150.110 requires a permit for all electrical work, so a Champion generator and transfer switch are a permitted job.

County electrical rules that affect the install

Sec. 150.110 requires copper wiring on the load side of the meter and EMT conduit throughout structures, and the county issues electrical permits only when a licensed and bonded electrical contractor is listed on the application. Since 1993, every contractor working in unincorporated Will County has had to register with the Land Use Department, carry insurance and post a $10,000 surety bond, with electrical contractors also filing a Letter of Intent for the property. We plan the Champion switch wiring, including any load-management modules, to those rules from the start.

Gas: Nicor and the meter check

Nicor Gas lists Will County in its service territory, and villages such as New Lenox and Homer Glen name Nicor as their gas provider. Champion’s spec tables list full-load natural gas use of 139.8 cubic feet per hour for the 8.5 kW, 198.1 for the 12.5 kW and 292.6 for the 22 kW fleX. We add that to the furnace, water heater and other appliances on the meter, and coordinate a Nicor meter upgrade before installation day when one is needed.

Electric: ComEd and recent outages

ComEd delivers electricity in Will County; village resident guides list it as the provider. On August 13, 2026 the county announced recovery resources after a series of storms, including severe weather on August 11, caused damage and power outages in several communities, which its emergency management director described as significant. The Champion switch isolates the house from ComEd’s lines during an outage, so the generator never back-feeds toward line crews, and returns the house to utility power when service is restored.

Drainage beyond the flood maps

The county’s Comprehensive Stormwater Management Plan says local drainage flooding is a bigger problem than river overbank flooding in many areas and that there is considerably more flood-prone land than the federal maps show, because only floodplains draining about a square mile or more are mapped. We place the generator on the highest practical ground and away from where water collects.

How a Will County Champion job runs

  • Address check and estimate. We confirm your address is inside our radius or quote it case by case, then visit to count loads, check the panel and meter, and locate the sump, well and septic.
  • Permit. We file with your city or village, or through the county SmartGov portal for an unincorporated address, with our registration, bond and Letter of Intent on file.
  • Gas. We arrange any Nicor meter upgrade, or coordinate the propane tank with your supplier.
  • Install and inspect. Our crew sets the generator and runs the gas line; our licensed electricians install the switch to the county’s wiring rules. Most installs take one to two days on site.
  • Activation. We start the unit, test a transfer, set the exercise, register it with Champion and walk you through it.

Champion choices for Will County homes

HomeUsual starting pointWill County note
Basement on drain tile and sump, gas heat8.5 kW select circuitKeeps the sec. 150.070 sump running with heat and refrigeration; fully installed from $6,000.
Well, sump and septic on an unincorporated lot12.5 kW select circuit, natural gas or propaneRoom for the well pump’s starting load; county wiring rules apply.
Newer subdivision home with central air14 kW aXis, 200 A switchWhole house; Champion lists a 5-ton AC rating.
Large home, two compressors or EV charger22 kW fleX with load managementSump stays on a protected circuit; fully installed from $9,000.

Warranty and service at a distance

Will County is the farthest of our counties from an office, so it is worth knowing how Champion’s warranty works before you buy. Champion’s support center says its 10-year/2,000-hour limited warranty on air-cooled 8.5 to 20 kW home standby models begins at successful activation, requires registration and scheduled maintenance from the owner’s manual, and covers parts, labor and mileage in years one and two and parts only in years three through ten, with warranty work handled by an authorized or certified Champion home standby service dealer. Champion’s 22 kW pages list 10 years on the generator and 2 years on the switch. GSHA registers the system at start-up and schedules maintenance from Lake Bluff; for addresses beyond our standard radius we explain service scheduling when we quote.

Champion products we install in Will County

The same Champion lineup is available county-wide. Full specs, switch options and warranty details are on the main Champion page.

Champion 22kW fleX home standby generator

22 kW fleX whole house

22,000 W LP / 19,800 W NG with a service-entrance switch in 100, 150 or 200 A and optional fleX load management.

Fully installed from $9,000

Explore the 22 kW fleX
Champion 14kW aXis home standby generator

14 kW aXis whole house

14,000 W LP / 12,500 W NG with an aXis service-entrance switch and optional aXis load management.

Request installed pricing

Explore the 14 kW aXis
Champion 12.5kW home standby generator

12.5 kW select circuit

12,500 W LP / 11,000 W NG with a 100 A outdoor switch for up to 16 circuits.

Request installed pricing

Explore the 12.5 kW
Champion 8.5kW home standby generator

8.5 kW select circuit

8,500 W LP / 7,500 W NG with a 50 A outdoor switch for up to 12 essential circuits.

Fully installed from $6,000

Explore the 8.5 kW

Current Champion offers

Ask GSHA about current Champion offers.

Tell us your planned installation date when you book and we will tell you whether a Champion promotion applies to the model you are quoted. Financing through Synchrony and Service Finance, subject to credit approval, is described on our financing page.

Will County Champion questions

Which Will County towns are inside your standard radius?

Bolingbrook, Romeoville, Homer Glen, Lockport and Plainfield are inside the 50-mile radius of our Lake Bluff office. Joliet, New Lenox, Mokena, Frankfort, Crest Hill and Shorewood, at roughly 52 to 56 miles, are quoted case by case.

Will a Champion generator run my sump pump and well pump?

Yes. The county requires basements and crawl spaces to drain to a sump pump, and the Health Department permits private wells, so both go on the load list. The 12.5 kW select-circuit Champion is a common fit for both plus heat and refrigeration.

Do I need a permit in unincorporated Will County?

Yes. The county ordinance requires a permit for electrical work outside municipal limits, issued by the Land Use Department through its SmartGov portal, and only with a licensed, bonded and registered electrical contractor listed. Inside a city or village, that municipality issues it. GSHA handles either.

Will Nicor need to upgrade my meter?

Sometimes. We compare the Champion model’s published full-load gas use with your meter’s capacity and existing appliances, and arrange the upgrade with Nicor when needed.

What can change the installed price here?

Distance beyond our standard radius, a long gas run, a Nicor meter upgrade, a propane tank, a service-entrance switch that needs panel work, load-management modules and the county’s conduit requirement. All are priced at the free estimate.

Will a Champion start in a January cold snap?

Champion rates the 24 V starting systems on its 8.5, 12.5, 14 and 22 kW home standby units to start down to -22 F, and its pages for the smaller units say no warming kit is needed. A healthy battery matters, so we check it during scheduled maintenance before winter.

Are there Champion offers right now?

Ask GSHA about current Champion offers. We confirm any promotion against Champion’s terms and your installation date at the estimate.

Do you service Champion generators in Will County?

Yes, whether or not we installed them; Champion makes scheduled maintenance a condition of its warranty. See our generator tune-up and generator repair pages.

More Champion pages

Authorized Champion dealer in Illinois (main page) · Champion prices and installation · Generator installation · Generator error codes guide

Other counties

Request a free Champion installation estimate

Tell us about your Will County home, including the address so we can confirm coverage, and what you want to keep running in an outage. We will follow up to schedule a free, no-obligation in-home visit, count the loads, check the panel and the gas meter or propane tank, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA advisor counts the loads, checks the electrical service and gas supply, and explains the Champion options that fit.

Written quote

You receive an itemized quote with the generator, transfer switch, permits, start-up and warranty registration included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured electrical, heating, cooling, plumbing and generator contractor and an authorized Champion dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Champion 201010, 22 kW with 100A Switch and fleX Technology — https://www.championpowerequipment.com/product/201010-22-kw-whole-house-home-standby-generator-and-100a-switch-with-flex-technology/ (accessed 2026-10-23)
  2. Champion 100837, 14 kW with 200A Switch and aXis Technology — https://championpowerequipment.com/?p=108378 (accessed 2026-10-23)
  3. Champion 100179, 12.5 kW Select Circuit with 100A Switch — https://www.championpowerequipment.com/product/100179-12-5-kw-home-standby-generator-with-100-amp-outdoor-switch (accessed 2026-10-23)
  4. Champion 100177, 8.5 kW Select Circuit with 50A Switch — https://www.championpowerequipment.com/product/100177-8-5-kw-home-standby-generator-with-50-amp-outdoor-switch/ (accessed 2026-10-23)
  5. Champion Support: Home Standby Generator Warranty — https://help.championpowerequipment.com/article/e9pbt6pk36-home-standby-generator-warranty (accessed 2026-10-23)
  6. GSHA Champion Generators prices and installation page — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/champion-generators-prices-and-installation-cost/ (accessed 2026-10-23)
  7. GSHA KOHLER Generator Installation in Will County (verified county facts, distances and sources) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/kohler-generators-installation-will-county/ (accessed 2026-10-23)
  8. Will County, Illinois (Wikipedia; 2020 Census) — https://en.wikipedia.org/wiki/Will_County,_Illinois
  9. Nicor Gas: Where We Are — https://www.nicorgas.com/company/where-we-are.html
  10. Village of New Lenox: Guide for New Residents — https://www.newlenox.net/292/Guide-for-New-Residents
  11. Village of Homer Glen: Utilities — https://www.homerglenil.org/2485/Utilities
  12. Will County Land Use Department: Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building
  13. Will County Building Ordinance sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886
  14. Will County Building Ordinance sec. 150.110 Electrical Requirements — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-48224
  15. Will County Building Ordinance sec. 150.070 (drain tile and sump pumps) — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-48134
  16. Will County Land Use Department: contractor registration FAQ — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987
  17. Will County Comprehensive Stormwater Management Plan (1998) — https://willcounty.gov/County-Offices/Economic-Development/Stormwater-Management-Planning-Committee/Plans-Projects/FileId/4021
  18. Will County Health Department: Safe Water, Wells and Septic Systems — https://willcountyhealth.org/safe-water-wells-and-septic-systems/
  19. Will County news release, August 13, 2026 — https://willcounty.gov/News/resources-available-for-will-county-residents-impacted-by-storms
  20. Will County Land Resources Management Plan excerpts (2002) — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Community-Development-Division/Long-Range-Planning/FileId/2025
  21. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/