Softeners, iron and sulfur filters, RO. Local GSHA installation.
US Water Systems Installation in Northern Illinois
GSHA Services, LTD installs and services US Water Systems equipment. From our Woodstock headquarters and our Lake Bluff office, our own plumbing crews and licensed electricians install US Water Systems water softeners, iron and sulfur filtration, whole-house carbon filtration, salt-free conditioners and reverse osmosis systems for homeowners in McHenry, Lake, Boone, Kane, DuPage, Cook and Will counties.
Water in this part of Illinois ranges from moderately hard Lake Michigan water to well water that utilities report at 20 grains of hardness or more before treatment. The right system depends on which of those comes out of your tap, so every project starts with a free in-home estimate in which we look at your water source, your utility’s annual water quality report or your well test, your plumbing and the space you have. Request a free estimate or call (224) 220-3660.

US Water Systems Installation and ServiceGSHA Services, LTD · Woodstock & Lake Bluff, IL
US Water Systems installation by our own crews
Equipment sold with installation
GSHA sells US Water Systems equipment together with professional installation by our own technicians, and we check programming and water quality after startup. The person who cuts into your main water line, sets the bypass, runs the drain line to an air gap and programs the control valve works for GSHA, not a subcontractor.
Plumbers and electricians under one roof
Water treatment touches more than one trade. A softener or backwashing filter needs a drain and a receptacle; a whole-house reverse osmosis system like the US Water Defender needs, according to US Water, a 220-volt circuit and two 110-volt circuits. GSHA’s licensed electricians handle the electrical side, and because we also install and service water heaters, boilers and HVAC equipment, we look at how treated water affects the rest of the house.
We start with your water, not a product
US Water itself says that well water calls for a detailed analysis from an accredited laboratory before a system is chosen. On city water we start with your utility’s annual water quality report; on a private well we start with a lab test. Then we size the equipment to the numbers.
Questions before you book?
Call (224) 220-3660 or email info@gshaservices.com. If you have a recent well test or know which utility serves you, have it handy.
More from GSHA on US Water Systems and water treatment
- US Water Systems installer page: our product overview and installation FAQ
- Water treatment installation in Illinois & Wisconsin
- Water filtration systems
- Matrixx Smart Water softener · FlexxHD Economy softener · Synergy twin-alternating softener
- Matrixx-Hybrid filter and softener · GreenWave salt-free alternative · Limeblaster compact salt-free system
- Matrixx InFusion iron and sulfur system · Flexx InFusion iron and sulfur system
- All American reverse osmosis · Defender whole-house reverse osmosis
- Well water problems in northwest Illinois
- Best water softeners for hard water homes · Best whole house water filtration systems
- Service area by ZIP code
Current US Water Systems offers
Ask GSHA about current US Water Systems offers.
US Water runs its own sales on uswatersystems.com, but we did not find a US Water Systems promotion that is also published on gshaservices.com, so none is advertised here. US Water’s product pages also describe a one-year satisfaction guarantee on systems bought from US Water; we explain at the estimate how manufacturer warranty and guarantee terms apply to a system bought and installed through GSHA. Financing programs available through GSHA are on our financing page.
Last checked 2026-10-23. Offers and guarantees are set by the manufacturer and can change; we confirm what applies at your estimate.
Match the system to the water problem
Most homes in our area need one or two of these systems, not all of them. The table pairs common water conditions with the US Water Systems equipment designed for them, using US Water’s own descriptions. Your water test or utility report decides which rows apply to you.
| What you are dealing with | US Water Systems equipment | What US Water says it does |
|---|---|---|
| Hardness: scale on fixtures, spots on glass, crust in the water heater | Matrixx, Flexx-HD or Synergy salt-based softener | Ion exchange with 10% cross-linked resin; reduces hardness to near zero |
| Scale control without salt, on city water | GreenWave salt-free conditioner | Template-assisted crystallization; leaves calcium and magnesium in the water and keeps them from forming scale; not a softener |
| Iron staining, rotten-egg odor, manganese on a well | Matrixx InFusion system | Hydrogen peroxide injection plus catalytic carbon, a 5-micron filter and a Matrixx softener |
| Chlorine or chloramine taste and odor on city water | Matrixx catalytic carbon backwashing filter | Reduces chloramines, chlorine and most other volatile organic chemicals |
| Drinking water at the kitchen tap | All American under-sink reverse osmosis | Five stages: sediment, carbon block, sub-micron carbon block, 100 GPD RO membrane, post-carbon |
| Reverse osmosis water at every tap | Defender whole-house reverse osmosis | 4,000 to 8,000 GPD with storage, repressurization and Pulsar UV as the final step |
| Microbiological concerns found in a well test | Pulsar ultraviolet system | Stainless chamber; flow rates rated at 95% UVT and a 30 mJ/cm2 dose |
Product claims are the manufacturer’s, from uswatersystems.com. They describe what the equipment is designed to do; your results depend on your water and on correct sizing and installation.
US Water Systems models GSHA installs
These are the US Water Systems product families we quote most often. Specifications are taken from US Water’s product pages; we confirm the exact model, size and options for your home at the estimate. Product pages on our own site are linked where we have them.

Matrixx smart metered softener
US Water’s Bluetooth-connected softener, set up and monitored through the Legacy View app.
MXX-100 · MXX-150 · MXX-200
Specifications
- Max capacity: 35,000 / 53,000 / 70,000 grains
- Service flow: 10 / 15 / 20 gpm
- Resin: NSF-certified 10% cross-linked
- Valve: WQA Gold Seal certified smart control valve
- Brine tank: holds 220 lb of salt
- Pressure 20-100 psi; water 39-100 F
- Warranty: lifetime tank and resin; 10 years valve and electronics
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.

Flexx-HD economy metered softener
A demand-initiated softener with a ceramic rotary disc valve and built-in bypass.
FXP-100 · FXP-150 · FXP-200
Specifications
- Capacity: 35,000 / 53,000 / 70,000 grains
- Max flow: 10 / 15 / 20 gpm
- US Water’s sizing: 1-2 people / 2-4 people / 4+ people
- Resin: 10% cross-linked
- 1-inch connections, built-in bypass, 12V electronics
- Warranty: lifetime tank; 7 years valve and electronics
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.

Synergy twin-alternating softener
Two resin tanks take turns, so soft water is available while one tank regenerates.
163-SS-10 · -15 · -20 · -25
Specifications
- Capacity: 35,000 to 88,000 grains
- Max flow: 10 to 25 gpm
- Six-cycle valve; 1-inch stainless bypass
- Resin: 10% cross-linked; regenerates with soft water
- Can regenerate with potassium
- Warranty: lifetime tanks and resin; 10 years valve and electronics
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.

Matrixx InFusion iron & sulfur system
US Water’s well water combination: peroxide injection, catalytic carbon, a sediment filter and a Matrixx softener.
10 gpm · 15 gpm options
Specifications
- Oxidation by hydrogen peroxide, injected in proportion to flow
- Coconut-shell catalytic carbon tank
- Magna 5-micron sediment filter
- Brine tank holds 240 lb of salt
- InFusion tank backwashes about every 2-3 days
- US Water’s sizing: 10 gpm for 1-2 baths, 15 gpm for 2-3
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.
Matrixx catalytic carbon filter
A backwashing whole-house carbon filter for chlorine and chloramine on city water.
081-MXF-CX-100 to -250
Specifications
- Max flow: 5 / 10 / 15 / 20 gpm
- Media: catalytic coconut-shell carbon, 1.0-2.5 cu ft
- US Water says the carbon typically lasts 5+ years
- Bluetooth valve with Legacy View app; built-in bypass
- Warranty: lifetime tank; 10 years valve and electronics
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.

GreenWave salt-free conditioner
No salt, drain or electricity. Conditions hardness rather than removing it.
GW-100 · GW-150 · GW-200
Specifications
- Flow: 10 / 15 / 20 gpm; 1-inch connections, bypass included
- Chlorine must be removed ahead of it
- Limits: iron under 0.3 mg/L, manganese under 0.05 mg/L, pH 6.5-8.5
- Installed as the last whole-house stage, indoors
- Warranty: lifetime limited on tank and valve (original owner, original home)
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.

All American under-sink RO
A five-stage drinking water system for the kitchen, with an optional sixth remineralization stage.
5-stage · 6-stage
Specifications
- 100 GPD thin-film composite membrane
- 4.5-gallon storage tank
- Lead-free ceramic disc faucet
- US Water says NSF/ANSI 58 certification is in process
- Warranty: 5 years on tank and valves
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.

Defender whole-house RO
Reverse osmosis for the entire house, with atmospheric storage and a booster pump.
4,000 · 6,000 · 8,000 GPD
Specifications
- Waterlogix 4 x 40-inch membranes
- Storage: one or two 140- or 250-gallon tanks
- Multi-stage stainless booster pump
- Pulsar UV as the final step
- Needs 10 gpm at 40 psi supply, two air-gapped drains, one 220V and two 110V circuits
Specifications from uswatersystems.com; GSHA confirms the model for your home at the estimate.
US Water also sells commercial systems and other models not listed here. GSHA’s work covers homes and light commercial properties; ask if you need something not shown.
Choosing a US Water Systems softener
A water softener exchanges the calcium and magnesium that make water hard for sodium or potassium, using a bed of resin that is periodically cleaned and recharged with brine. That recharge is called regeneration. All three US Water softener families we install are metered: they measure the water you actually use and regenerate when the resin needs it, rather than on a fixed timer.
Matrixx: the connected option
The Matrixx is US Water’s Bluetooth softener. Through the free Legacy View app, US Water says, you can see usage, regeneration history and salt level, check salt remotely, and get 90-day usage reports, peak flow rates and average daily use. US Water lists a WQA Gold Seal certified control valve with a single internal moving part, NSF-certified 10% cross-linked resin, an NSF-approved fiberglass tank in a chrome jacket and a battery backup for power outages. The app also offers High Efficiency, Optimal and Maximum regeneration settings. In high-efficiency mode, US Water lists salt and water use per regeneration of 3 lb and 33 gallons for the MXX-100, 4.5 lb and 58 gallons for the MXX-150, and 6 lb and 62 gallons for the MXX-200.
Flexx-HD: the straightforward option
The Flexx-HD uses the same three capacity sizes, a ceramic rotary disc valve that US Water says outlasts rubber-seal piston valves, 10% cross-linked resin and a built-in bypass. US Water’s own sizing guide pairs the FXP-100 with one or two people, the FXP-150 with two to four people and the FXP-200 with four or more. Its warranty on the valve and electronics is 7 years against the Matrixx’s 10.
Synergy: soft water around the clock
A single-tank softener supplies untreated water while it regenerates, usually in the middle of the night. The Synergy has two resin tanks that alternate, so one is always in service. US Water says it regenerates and refills its brine tank with soft water, uses a six-cycle valve with two moving parts in the water stream, and is especially efficient for big families or water that contains iron. Sizes run up to 88,000 grains and 25 gpm.
How we size one
Capacity is matched to two numbers: the hardness of your water and how much water your household uses. On Lake Michigan water at around 8 grains per gallon, a smaller unit regenerates less often than it would on 25-grain well water. Flow rate matters too: a softener that is too small for the number of bathrooms in use at once will cost you water pressure. We also look at iron, because US Water’s FAQ says a softener removes only small amounts and recommends an iron filter ahead of it when iron is present.
Salt or salt-free?
US Water is direct about the difference. Its GreenWave conditioner is, in its words, a salt-free water conditioner, not a softener: it leaves calcium and magnesium in the water and is designed to keep them from forming scale. It needs no salt, drain or power, but it must have chlorine removed ahead of it, and US Water lists limits of iron under 0.3 mg/L, manganese under 0.05 mg/L and pH between 6.5 and 8.5. That makes it a city-water product in most of our service area; on raw well water, a softener or an iron system is usually the starting point.
Iron, sulfur and manganese: the InFusion approach
Orange staining, a black film in toilet tanks or a rotten-egg smell from both hot and cold taps usually point to iron, manganese or hydrogen sulfide in a well. US Water’s answer for most of these homes is the InFusion system, sold as the Matrixx InFusion combination with a softener or as the Flexx InFusion.
- Oxidation with peroxide. A precision injection panel adds hydrogen peroxide to the incoming line after the pressure tank, metered to the flow rate. US Water describes peroxide as the best oxidant for the job and says proportional injection keeps oxidation working from 1 to 20 gpm.
- Catalytic carbon. A tank of coconut-shell catalytic carbon then removes the oxidized iron, sulfur and manganese. US Water says the tank backwashes about every two to three days.
- Sediment filter. A Magna 5-micron filter catches sand, silt and sediment; US Water says the cartridge should be replaced yearly.
- Softener. In the Matrixx InFusion combination, a Matrixx softener follows, regenerating on demand, typically every four to seven days according to US Water, with a 240 lb brine tank.
- Upkeep. US Water says peroxide is added about twice a year.
US Water publishes no numeric maximums for iron, manganese or hydrogen sulfide on the InFusion page, and it says treating well water requires a detailed analysis from an accredited laboratory. We agree, which is why we ask for, or arrange, a lab test before quoting an iron system. If the smell is only in the hot water, the cause may be the water heater’s anode instead; see our Corro-Protec powered anode page.
Whole-house filtration for chlorinated and chloraminated water
Municipal water is disinfected before it reaches you, with either chlorine or chloramines. In our service area, the utility reports we read show both: chlorine in Crystal Lake, Belvidere, the Lake County systems on Central Lake County JAWA water and the communities on Chicago-treated Lake Michigan water; chloramines in Aurora and, according to its report’s disinfectant table, Joliet. Some homeowners prefer to reduce the taste and odor of that disinfectant throughout the house.
US Water’s Matrixx catalytic carbon backwashing filter is built for that. US Water says it reduces chloramines, chlorine and most other volatile organic chemicals using catalytic, high-activity granular carbon made from steam-activated coconut shell. It backwashes automatically, typically every one to two weeks for a few minutes on municipal water, and US Water says the carbon typically lasts five years or more. The page’s Q&A adds a caution worth repeating: it may not fully remove free ammonia, especially at higher concentrations, and US Water recommends a detailed water test first. On chloraminated water we take that into account when sizing.
Carbon and softening together
Many city-water homes want both scale control and better-tasting water. The usual order is carbon filtration first and the softener second. US Water also points out that 10% cross-linked resin, which all three of its softener families use, is more chlorine-resistant than ordinary 8% resin. GSHA also lists the Matrixx-Hybrid, a combined filter and softener, on our product page; we will tell you whether a combined unit or two separate tanks suits your water and space better.
Reverse osmosis: at the kitchen sink or for the whole house
All American under-sink RO
For drinking and cooking water, the All American is US Water’s five-stage under-sink system. US Water describes the stages as a sediment filter, a carbon block filter for chlorine and other chemicals, a sub-micron carbon block that it says reduces chloramine, PFAS and other chemicals through extended contact, a 100 GPD thin-film composite RO membrane for dissolved solids including fluoride and heavy metals, and a post-carbon filter. A sixth remineralization stage is optional. The system has a 4.5-gallon tank and a lead-free ceramic disc faucet. US Water says the system is built and assembled in America with more than 98 percent American-sourced parts, and that it is in the process of getting it certified to NSF/ANSI 58; until that is complete, we describe it as not yet certified. Warranty: 5 years on the tank and valves.
Defender whole-house RO
Whole-house reverse osmosis is a much bigger installation. US Water offers the Defender at 4,000, 6,000 or 8,000 gallons per day, with Waterlogix 4 x 40-inch membranes, atmospheric storage tanks of 140 or 250 gallons, a multi-stage stainless booster pump to repressurize the water, and Pulsar UV disinfection as the final step. US Water’s requirements are specific: city water needs hardness treatment, chemical removal and sediment filtration ahead of it, and well water needs a laboratory test first; the supply must deliver at least 10 gpm at 40 psi; it needs two half-inch air-gapped drains of at least 3 gpm each; one 220-volt and two 110-volt circuits on 20-amp breakers; a 29-inch door opening; and an open area of at least 72 by 30 inches. US Water also warns that RO water can corrode soft metals such as brass and copper, so pH adjustment is usually needed with that plumbing. A remineralization stage is available for that purpose.
Those requirements are why a Defender quote always starts with a site visit. GSHA’s plumbers and licensed electricians handle every part of it, including the circuits.
Private wells: test first, then treat
Every county we serve has homes on private wells, and McHenry County’s health department states that the county is entirely dependent on groundwater. Well water chemistry can change from one property to the next, so we do not guess. Our order of work for a well home is:
- Get a lab analysis. Iron, manganese, hardness, pH, hydrogen sulfide, and bacteria where there is reason to check. US Water says well water needs a detailed analysis from an accredited laboratory, and GSHA can arrange testing if you do not have a recent report.
- Remove what fouls everything else. Iron, manganese and sulfur come out first, typically with an InFusion system, because they can foul resin and media downstream.
- Soften. A Matrixx or Synergy softener handles the hardness that remains.
- Disinfect if the test calls for it. US Water’s Pulsar UV systems come in 10, 15 and 20 gpm sizes with a stainless steel chamber, rated at 95% UV transmittance and a 30 mJ/cm2 dose. US Water says the lamp is rated for 9,000 hours, can be changed without interrupting flow, and that the controller shows remaining lamp life and alarms if the lamp fails. It also says UV works only when the water is clear of sediment, iron and other contaminants that block UV light, which is why it goes last.
Our guide to well water problems in northwest Illinois explains common test results and what they mean for treatment.
US Water Systems warranties, by product
US Water publishes warranty terms on each product page. They differ by product, so here they are side by side as US Water lists them. Terms can change; we confirm current terms at your estimate and explain how they apply to equipment bought and installed through GSHA.
| Product | Warranty as listed by US Water |
|---|---|
| Matrixx smart metered softener | Lifetime on tank and resin; 10 years on valve and electronics |
| Flexx-HD economy metered softener | Lifetime on tank; 7 years on valve and electronics |
| Synergy twin-alternating softener | Lifetime on tanks and resin; 10 years on valve and electronics |
| Matrixx catalytic carbon backwashing filter | Lifetime on tank; 10 years on valve and electronics |
| GreenWave salt-free conditioner | Lifetime limited on tank and valve, original owner in the original home |
| All American under-sink RO | 5 years on tank and valves |
| Defender whole-house RO | 2-year bumper-to-bumper per US Water’s comparison table; lifetime on the UV unit’s stainless chamber |
GSHA’s part is the installation record. We leave you the model and serial numbers, the startup settings and a commissioning checklist so that any warranty claim has the documentation it needs.
How GSHA installs a US Water Systems system
A softener or filter is only as good as its installation: the wrong location, a missing bypass or an improper drain can cause problems that have nothing to do with the equipment. These are the steps our crews follow.
- Find the right spot. Usually near where the main line enters, after the meter or pressure tank, with room to service the tanks, a drain nearby and a receptacle. US Water lists operating limits of 20 to 100 psi and 39 to 100 degrees F for the Matrixx and Flexx-HD, so the location must not freeze.
- Plan the outside taps. Many homeowners prefer untreated water at hose bibs. We discuss which lines are treated before we cut in.
- Install with a bypass. Every system goes in with a bypass so it can be serviced without shutting off water to the house.
- Run the drain correctly. Backwash and regeneration water goes to a drain through an air gap, sized for the backwash flow US Water lists for that model.
- Power. Softener and filter valves run on low-voltage supplies; a Defender needs dedicated circuits. GSHA’s licensed electricians handle any new receptacle or circuit.
- Program and start up. We set hardness, capacity, reserve and regeneration mode from your water numbers, pair the Legacy View app where the valve supports it, load resin and media where they ship separately, and run a first regeneration or backwash.
- Test and hand over. We test treated water after startup, show you the bypass, salt level and app, and leave the documentation.
Permit requirements for water treatment equipment are set by each municipality. GSHA confirms with the building department for your address and pulls any permit the job requires, including for electrical work. Each county page has local notes.
Water in the counties we serve
The water entering your softener depends on where you live: Lake Michigan water along the lakefront and in much of DuPage and Cook, groundwater in McHenry, Boone and much of Will, and a Fox River and well blend in Aurora. The figures below come from each utility’s most recent water quality report we could read. Hardness is listed only where the utility publishes it.
| County | Example utility and source | Disinfectant | Hardness published | What it usually means for treatment |
|---|---|---|---|---|
| McHenry | Crystal Lake: shallow and deep wells; city aerates, filters iron and softens | Chlorine | About 20-30 grains entering treatment; about 2-8 grains per gallon delivered | City water already softened; private wells often need iron treatment and softening |
| Lake | Central Lake County JAWA: Lake Michigan, treated in Lake Bluff | Chlorine | Highland Park (Lake Michigan): 7.3-8.2 grains per gallon | Moderate hardness; smaller softener, optional carbon |
| Boone | Belvidere: five wells, four in deep sandstone | Chlorine | 19 to 28 grains (average) | Very hard, unsoftened city water; larger softener capacity |
| Kane | Aurora: Fox River plus shallow and deep wells, lime-softened | Chloramines | 110-160 mg/L (6-10 grains per gallon) | Catalytic carbon for chloramine; moderate softening |
| DuPage | DuPage Water Commission: Lake Michigan water bought from Chicago | Chlorine | Elmhurst: about 144 mg/L, about 8 grains per gallon | Moderate hardness; softener, carbon or RO by preference |
| Cook | Hanover Park: Lake Michigan water from Chicago via a joint action water agency | Chlorine | Not stated in Hanover Park’s report | Lake water treatment; space and drains often decide the layout |
| Will | Joliet: 21 deep bedrock and 5 shallow gravel wells; Lake Michigan water planned from 2030 | Chloramines (per the report’s table) | Not stated; the report says Lake Michigan water will be lower in hardness | Soften now; reprogram after the switch |
One utility per county is shown as an example; your own utility’s report may differ. Each county page names its sources. The right-hand column is GSHA’s general guidance, not a utility statement.
Find your county
GSHA installs US Water Systems equipment from two offices: Woodstock (McHenry County) and Lake Bluff (Lake County). Crews travel from those offices into Boone, Kane, DuPage, Cook and Will counties. Each county page covers the communities we serve there, the local water supply, how US Water products fit that water, installation notes and how to get an estimate. The ZIP-code list is the definitive coverage map.
- McHenry County, ILWoodstock office
- Lake County, ILLake Bluff office
- Boone County, ILserved from Woodstock
- Kane County, ILserved from Woodstock and Lake Bluff
- DuPage County, ILserved from Woodstock and Lake Bluff
- Cook County, ILserved from Woodstock and Lake Bluff
- Will County, ILserved from Woodstock and Lake Bluff
About US Water Systems
According to its own company page, US Water Systems began in 2003, when its founders started building water treatment systems in their garage. Today the company says it designs and manufactures its systems in its own U.S. facilities in Plainfield, Indiana and Tampa, Florida, and that systems are built to order and checked by its team. Its product pages describe components such as NSF-certified resin and NSF-approved tanks on the Matrixx softener, and a WQA Gold Seal certified control valve on the Matrixx and Flexx-HD. Where a product lacks a third-party certification, as with the All American RO’s pending NSF/ANSI 58 certification, we say so.
Questions and answers
Does GSHA install US Water Systems equipment?
Yes. GSHA Services, LTD installs and services US Water Systems equipment. We supply US Water Systems equipment with installation by our own crews.
Do I need a softener, a filter or both?
A softener addresses hardness. A filter addresses things like chlorine, chloramine, iron or sulfur. Many city-water homes use a carbon filter followed by a softener; many well homes need an iron and sulfur system ahead of the softener. Your utility report or well test tells us which.
Is reverse osmosis the same as a softener?
No. RO pushes water through a membrane to reduce dissolved solids and is usually installed at the kitchen sink. US Water’s whole-house Defender actually requires hardness treatment ahead of it on city water.
My city already softens its water. Do I still need a softener?
Maybe not. Crystal Lake, for example, reports delivering water at about 2 to 8 grains per gallon after central softening. We will look at your utility’s figure before recommending one, and some homes in softened-water communities choose only carbon filtration or RO.
Can I use potassium instead of salt?
US Water says the Synergy can regenerate with potassium, which may be slightly less efficient, so salt settings are typically raised about 10 percent. We set the valve for whichever you choose.
Will a salt-free system work on my well?
Usually not without pretreatment. US Water lists limits of iron under 0.3 mg/L and manganese under 0.05 mg/L for GreenWave and says iron, manganese, sulfur or sediment can foul its media. It also requires chlorine to be removed first on city water.
How often does an iron and sulfur system need attention?
For the InFusion system, US Water says peroxide is added about twice a year and the Magna sediment cartridge is replaced yearly. The carbon tank backwashes itself every two to three days.
Do you handle the electrical work for whole-house RO?
Yes. US Water says the Defender needs one 220-volt and two 110-volt circuits on 20-amp breakers, and recommends a licensed electrician confirm them. GSHA’s own licensed electricians do that work.
Do I need a permit?
It depends on your municipality and the scope of work. GSHA checks with the building department for your address and pulls any permit the job requires. Each county page has local notes.
Are there any US Water Systems offers right now?
Ask GSHA about current US Water Systems offers. We publish a promotion only when it is current on the manufacturer’s site and on our own. Financing options are on our financing page.
Request a free US Water Systems estimate
Tell us about your water: city water or a private well, which utility serves you, what you are noticing (scale, staining, odor, taste) and whether you have a recent water test. We will follow up to schedule a free, no-obligation visit.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
Water and site check
A GSHA technician reviews your water report or arranges a test, and checks the location, drain, power and plumbing.
Written quote
You receive an itemized quote naming the US Water Systems models, sizes and any electrical or permit work. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor that installs and services US Water Systems equipment. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install US Water Systems softeners, filtration and reverse osmosis across the northern and western Chicago suburbs; see the full service area by ZIP code. GSHA Services is an independent dealer, not US Water Systems; product warranties are provided by the manufacturer. Contact us · Financing · All products and brands
Sources
- US Water Systems, Matrixx Smart Metered Water Softener (specifications, warranty) — https://www.uswatersystems.com/products/matrixx-smart-metered-water-softener (accessed 2026-10-23)
- US Water Systems, Flexx-HD Economy Metered Water Softener — https://uswatersystems.com/products/flexx-pro-series-smart-metered-water-softener (accessed 2026-10-23)
- US Water Systems, Synergy Twin-Alternating Metered Water Softener — https://uswatersystems.com/products/us-water-systems-synergy-twin-alternating-metered-water-softener-1-flow (accessed 2026-10-23)
- US Water Systems, Matrixx Ultimate Iron & Sulfur Eradication & Softening System — https://uswatersystems.com/products/matrixx-whole-house-iron-sulfur-eradication-and-softening-combo-for-well-water (accessed 2026-10-23)
- US Water Systems, Matrixx Smart Whole House Backwashing Catalytic Carbon Filter — https://uswatersystems.com/products/us-water-matrixx-catalytic-carbon-backwashing-filter (accessed 2026-10-23)
- US Water Systems, GreenWave Salt-Free Water Conditioner — https://uswatersystems.com/products/greenwave-salt-free-water-conditioner (accessed 2026-10-23)
- US Water Systems, All American Reverse Osmosis System — https://uswatersystems.com/products/all-american-reverse-osmosis-system (accessed 2026-10-23)
- US Water Systems, Defender Whole House Reverse Osmosis System — https://uswatersystems.com/products/defender-whole-house-reverse-osmosis-system (accessed 2026-10-23)
- US Water Systems, Whole House Reverse Osmosis overview — https://www.uswatersystems.com/systems/whole-house-reverse-osmosis-systems (accessed 2026-10-23)
- US Water Systems, Pulsar Ultraviolet Disinfection System 10-20 GPM — https://uswatersystems.com/products/pulsar-ultraviolet-disinfection-system-10-20-gpm (accessed 2026-10-23)
- US Water Systems, About Us — https://uswatersystems.com/pages/about-us (accessed 2026-10-23)
- McHenry County Department of Health, Private Water Supply — https://mchenrycountyil.gov/departments/health-department/environmental-health/private-water-supply (accessed 2026-10-23)
- City of Crystal Lake, 2025 Annual Water Quality Report — https://www.crystallake.org/home/showpublisheddocument/25220/639143636150430000 (accessed 2026-10-23)
- Village of Round Lake Beach, 2025 Water Quality Report (CLCJAWA Lake Michigan supply) — https://cms2.revize.com/revize/roundlakebeach/Round%20Lake%20Beach%20CCR%202025.pdf (accessed 2026-10-23)
- City of Highland Park, Water Hardness Information — https://www.cityhpil.com/government/city_departments/public_works/water_treatment_plant/hardness_information.php (accessed 2026-10-23)
- City of Belvidere, 2025 Water Quality Report — https://www.belvidereil.gov/wp-content/uploads/2026/07/Water-Quality-Report-2025-2.pdf (accessed 2026-10-23)
- City of Aurora, 2025 Water Quality Report (Spanish-language edition) — https://www.aurora.il.us/files/sharedassets/mainsite/v/2/watersewer/documents/water-quality-reports/2025-water-quality-report-spanish-final.pdf (accessed 2026-10-23)
- DuPage Water Commission, 2025 CCR Report — https://dpwc.org/wp-content/uploads/2026/03/2025-DuPage-Water-Commission-CCR-Report.pdf (accessed 2026-10-23)
- City of Elmhurst, Water Quality Report 2025 — https://cms3.revize.com/revize/elmhurst/Document%20Center/Services/Public%20Works/Utility%20Division/Water%20Quality%20Report%202025%20FINAL%20.pdf (accessed 2026-10-23)
- Village of Hanover Park, 2025 Water Quality Report — https://www.hpil.org/327/Water-Quality-Report (accessed 2026-10-23)
- City of Joliet, 2024 Drinking Water Quality Report — https://www.joliet.gov/home/showpublisheddocument/36625/639026112238500000 (accessed 2026-10-23)
- GSHA US Water Systems installer page — https://gshaservices.com/us-water-systems-installer/ (accessed 2026-10-23)
- GSHA Services service-area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA Services financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
