Authorized Corro-Protec Dealer · McHenry County, IL

Corro-Protec Powered Anode Rods in McHenry County, IL

McHenry County homeowners are served from GSHA’s headquarters at 1257 Cobblestone Way, Suite A, in Woodstock, the county seat. As an authorized Corro-Protec dealer and installer, we replace the sacrificial magnesium or aluminum anode in tank water heaters with a Corro-Protec powered anode rod, using our own plumbing crews and, when an outlet is needed, our own licensed electricians.

Water is the reason this product comes up so often here. The McHenry County Department of Health says the county is 100 percent dependent on groundwater for its drinking water, and Crystal Lake’s 2025 water quality report describes well water arriving at roughly 20 to 30 grains of hardness and being aerated to strip out hydrogen sulfide before it reaches homes. Whether you are on a city system or your own private well, those are the conditions your water heater lives with.

Request a free installation estimateCall (224) 220-3660

WELLPRESSURE TANKWATER HEATER
Every public system and private well in McHenry County draws groundwater; the powered anode protects the tank whatever the source.

Communities we serve in McHenry County

Our published service area includes Woodstock, Crystal Lake, the City of McHenry, Cary, Harvard, Lake in the Hills, Marengo, Spring Grove and Wonder Lake. Algonquin and Huntley cross into Kane County, and Fox Lake and Island Lake are shared with Lake County, so you will also find them on those county pages. For a powered anode the county line matters less than the address: it decides which utility supplies your water and which building department, if any, needs to hear about the work.

Johnsburg and Bull Valley use listed ZIP codes such as 60051 and 60098, but homeowners in unincorporated parts of the county should confirm their address with us before scheduling. The complete list is on our service area page.

What McHenry County water means for a water heater

All groundwater, public and private

The McHenry County Department of Health states that the county is 100 percent dependent on groundwater as its source of drinking water, and that private wells are typically used where a centralized municipal system is not available. So whether your water comes from a village system or a well in the yard, it started underground. The department’s private water program lists unusual odor or taste as a warning sign worth investigating in a well. We did not find a current published figure for the share of county homes on private wells, so we do not quote one.

An example: Crystal Lake’s 2025 report

Crystal Lake, the county’s largest city, publishes a detailed annual report. Its 2025 report (covering calendar 2025) says the city draws from two kinds of aquifer: shallow sand-and-gravel aquifers 100 to 250 feet below the surface and deep sandstone aquifers 1,000 to 1,450 feet down. Treatment includes aeration and air stripping, which the report says remove hydrogen sulfide and volatile organic contaminants and oxidize iron; filtration to remove iron; ion exchange softening; fluoridation; and chlorination. Chlorine in the distribution system was reported at 1 mg/L (range 1 to 2 mg/L).

The hardness numbers are the striking part. The report says groundwater enters treatment at approximately 20 to 30 grains of hardness and leaves at about 2 to 8 grains per gallon, depending on the facility. In other words, Crystal Lake softens its water centrally. Other McHenry County municipalities operate their own systems and publish their own reports, which is why we ask which utility serves you rather than assuming.

ItemCrystal Lake, 2025 reportWhat it means for your tank
SourceShallow and deep wellsGroundwater chemistry, including sulfate and iron, varies by well
Hydrogen sulfideRemoved by aeration and air stripping at the plantA smell that appears only in your hot water points to the heater, not the supply
HardnessAbout 20-30 grains raw; about 2-8 grains per gallon deliveredSoftened city water; unsoftened private wells can be much harder
DisinfectantChlorine, 1 mg/L (range 1-2)Corro-Protec states its rod can be used with any water treatment system

Corro-Protec guidance for McHenry County homes

Private wells and the rotten-egg smell

Homes outside a municipal water system rely on private wells, and a sulfur smell at the hot tap is one of the complaints we hear about most. The Minnesota Department of Health, writing for well owners, explains that if only the hot water smells, the problem is likely in the water heater; that the anode is usually magnesium, which can help convert sulfate into hydrogen sulfide gas; and that removing the anode altogether may significantly shorten the heater’s life. Corro-Protec says its powered rod neutralizes the sulfur-reducing bacteria involved and that in most cases the smell is gone within 24 hours. Our first step is simple: smell the cold tap and the hot tap. If both smell, the cause is in the well water, and we will talk about testing and treatment rather than selling you an anode. Our well water guide explains the common problems and fixes.

Softened water, from the city or your own softener

Many McHenry County homes drink softened water, either because the utility softens it, as Crystal Lake does, or because the homeowner runs a softener on very hard well water. Corro-Protec says its rod can be used safely with any water treatment system, so a softener is not a reason to avoid it. Equally, a powered anode does not soften water. If you are on unsoftened well water and fighting scale, that is a job for a softener or filtration, which GSHA also installs; see our water filtration page.

Hard water and sediment

Corro-Protec says its rod reduces sediment accumulation, which it links to better water heater efficiency, and estimates energy savings of up to 10 percent a year, with results that vary. We present those as the manufacturer’s claims. In a home on 20-plus-grain well water, the honest picture is that a powered anode protects the steel tank from corrosion; managing the minerals is a separate decision.

Which model fits

Most McHenry County homes have a 40 or 50 gallon gas or electric tank with an anode port on top, which takes Corro-Protec’s standard 40-89 gallon dedicated-port rod (part 96387). If your heater is a Bradford White, the anode is often built into the hot water outlet, and the hot-outlet model (96383) with its stainless tee is the right part; Corro-Protec warns that putting a dedicated-port model in a hot water outlet voids the warranty. Larger tanks of 90 gallons or more need the 90-120 gallon X-Large rod (96388), which is 19 inches long and needs more headroom.

Permits, power and installation considerations

Permits

An anode retrofit is maintenance on an existing water heater, and we have not found a McHenry County municipality that lists it as a separate permit type. Crystal Lake’s permits page, for example, lists HVAC and air conditioning among required residential permits and names specific repairs that do not need one (limited fence, roof and siding repairs), but does not mention water heaters or anode rods either way. Rules differ by village and city, and unincorporated addresses go through the county’s Building Division. GSHA confirms with the department that covers your address and pulls any permit the work requires, particularly if the job grows to include a new receptacle or a replacement water heater.

Power

The Corro-Protec power supply ships with a 12-foot cord and needs to stay plugged in continuously; Corro-Protec’s warranty requires the product to be continuously powered and properly grounded. In some basements the nearest receptacle is across the room or behind stored items. If a dedicated or closer outlet makes sense, GSHA’s own licensed electricians install it, and we avoid running the cord where it can be unplugged or tripped over.

Headroom and access

The regular rod needs about a foot of clearance above the tank and the X-Large rod more. Water heaters tucked under basement stairs or beneath ductwork can be tight; we measure at the estimate and, if necessary, use the hot-outlet configuration or explain the options.

Condition of the heater

On hard well water, an old tank may already be heavily scaled or corroded. A powered anode protects a sound tank; it cannot fix a leak. If we see rust at the fittings, a weeping relief valve or a tank near the end of its life, we tell you before installing, and price a replacement through our water heater services if that is the better value.

Sacrificial or powered: deciding for a McHenry County home

Not every water heater needs a Corro-Protec rod, and we would rather tell you that than sell one. These are the questions we work through with McHenry County homeowners at the estimate.

QuestionSacrificial anode (magnesium or aluminum)Corro-Protec powered anode
How does it protect the tank?Corrodes in place of the steel until it is used upA small current from the power supply; Corro-Protec says the titanium rod is not consumed
MaintenanceCorro-Protec notes heater makers often call for inspection every 1-3 yearsCheck that the green light on the power supply is on
Hot-water sulfur smellThe Minnesota Department of Health says a magnesium anode can help produce hydrogen sulfideCorro-Protec says the smell is eliminated in most cases within 24 hours
Needs electricity?NoYes, continuously, via a 12-foot cord
WarrantyCovered by your water heater’s termsCorro-Protec: 5 years on rod and power supply; up to 20 years on the rod, prorated, with registration

When a powered anode makes the most sense

  • The hot water smells and the cold water does not. This is the clearest case, and it comes up in well-water homes and city-water homes alike.
  • The tank is sound and you plan to keep it. A rod that does not need replacing pays off over the remaining life of a healthy heater.
  • The anode is hard to reach. Where low headroom or a seized fitting makes routine anode replacement a struggle, a one-time retrofit can be simpler. Corro-Protec’s hot-outlet model and wye fitting help on some layouts.

When we may suggest something else

  • Both taps smell. The cause is in the water supply; a well test and treatment come first.
  • The tank is leaking or badly corroded. No anode can reverse that; replacement is the answer.
  • The heater is tankless, stainless steel or plastic-lined. Corro-Protec says these do not use an anode, so the product does not apply.

Whichever way you decide, GSHA’s crews out of Woodstock can handle it, from the anode to a full water heater replacement.

Corro-Protec models we install in McHenry County

The same residential models are available across the county. Specifications, output and box contents are on the main Corro-Protec page.

Dedicated port, 10-39 gal

Compact tanks with a separate anode port.

Part no. 96386

Model details

Dedicated port, 40-89 gal

The standard model for typical 40 and 50 gallon tanks.

Part no. 96387

Model details

Dedicated port, 90-120 gal

X-Large 19-inch rod for big tanks.

Part no. 96388

Model details

Hot water outlet, 10-120 gal

Fits most Bradford White heaters; Buderus version available.

Part no. 96383 (96382 Buderus)

Model details

Corro-Protec offers in McHenry County

Ask GSHA about current Corro-Protec offers.

We advertise a manufacturer promotion only after confirming it is current on corroprotec.com and on gshaservices.com, and none met that test when this page was checked on 2026-10-23. Corro-Protec’s product page describes a 90-day money-back guarantee alongside its limited warranty. GSHA’s financing programs are on our financing page.

McHenry County questions and answers

We are on a private well near Harvard and the hot water smells like rotten eggs. Will a Corro-Protec rod fix it?

If the cold water smells fine and only the hot water smells, the water heater is the likely source, and Corro-Protec says its rod eliminates the smell in most cases within 24 hours. If the cold water also smells, the well water itself carries hydrogen sulfide, and we will recommend testing and treatment instead. We check both taps before quoting.

Crystal Lake already softens its water. Does my water heater still need an anode?

Yes. Softening removes hardness minerals; it does not stop a steel tank from corroding where the glass lining is imperfect. A sacrificial anode or a powered anode is still what protects the tank, and Corro-Protec says its rod works with any water treatment system.

Is McHenry County water hard?

Groundwater here is hard before treatment. Crystal Lake’s 2025 report puts it at roughly 20 to 30 grains entering treatment and about 2 to 8 grains per gallon after the city softens it. Other utilities and private wells differ, so check your own utility’s annual report or have a well tested.

Do I need a permit to have an anode rod replaced in Woodstock or Crystal Lake?

We have not found either city listing anode replacement as a permit type, but municipal rules change and vary. GSHA checks with the building department for your address and handles any permit the job needs, including for a new receptacle or a water heater replacement.

How long does installation take?

Corro-Protec describes about 15 minutes for the rod itself on a straightforward tank. Draining, removing a seized old anode, refilling and any outlet work add time; we give you a realistic window when we schedule.

Do you register the warranty?

Yes. Corro-Protec’s extended warranty, up to 20 years on the rod and prorated from year 6, requires registration within 90 days of purchase. We register it with you after installation and leave the serial number and invoice with you.

Can you also repair or replace the water heater?

Yes. GSHA repairs and replaces tank and tankless water heaters across McHenry County. If your heater is near the end of its life, we will price both options so you can decide.

More Corro-Protec and water heater pages

Corro-Protec Authorized Dealer in Illinois (main page) · Corro-Protec powered anode rod installation · Water heater services · Well water problems in northwest Illinois · Water filtration systems

Other counties

Request a free Corro-Protec installation estimate

Tell us about your water heater in McHenry County: brand, size, fuel, rough age, whether you are on city water or a private well, and whether the hot water smells. We will follow up to confirm the right Corro-Protec model and schedule a free, no-obligation visit.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

Fit check

A GSHA technician confirms the anode location, thread, headroom and power, and checks the condition of the heater.

Written quote

You receive an itemized quote for the rod, installation, any electrical work and warranty registration. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Corro-Protec dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. GSHA Services is an independent dealer, not Corro-Protec; product warranties are provided by the manufacturer. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. McHenry County Department of Health, Private Water Supply — https://mchenrycountyil.gov/departments/health-department/environmental-health/private-water-supply (accessed 2026-10-23)
  2. City of Crystal Lake, 2025 Annual Water Quality Report (PWS IL1110150) — https://www.crystallake.org/home/showpublisheddocument/25220/639143636150430000 (accessed 2026-10-23)
  3. City of Crystal Lake, Building Permits — https://www.crystallake.org/your-government/departments/community-development/building/permits (accessed 2026-10-23)
  4. McHenry County Planning & Development, Building Division — https://www.mchenrycountyil.gov/departments/planning-development/building-division (accessed 2026-09-16, via GSHA county research)
  5. Minnesota Department of Health, Hydrogen Sulfide in Well Water — https://www.health.mn.gov/communities/environment/water/wells/waterquality/hydrosulfide.html (accessed 2026-10-23)
  6. Corro-Protec FAQ — https://www.corroprotec.com/faq/ (accessed 2026-10-23)
  7. Corro-Protec Powered Anode Rod for Water Heaters (product page) — https://www.corroprotec.com/product/water-heater-anode-rod/ (accessed 2026-10-23)
  8. Corro-Protec Limited Warranty — https://www.corroprotec.com/corro-protec-limited-warranty/ (accessed 2026-10-23)
  9. GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
  10. GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)