Authorized Generac Dealer · Cook County, IL
Authorized Generac Dealer Serving Cook County, IL
GSHA Services, LTD installs Generac home standby generators across most of Cook County from our Lake Bluff office at 11 N Skokie Hwy, Lake Bluff, IL 60044, with communities on the county’s northwest edge served from our Woodstock headquarters. We do not have an office in Cook County, but the north suburbs are a short trip: the closest villages are about 10 straight-line miles from Lake Bluff, Chicago’s North Side about 23 and the Loop about 30. As an authorized Generac dealer and installer, we do the whole job with our own crews and licensed electricians rather than subcontracting the transfer switch or the gas piping.
Cook County’s housing is the oldest in our territory. The median home was built in 1961 (U.S. Census Bureau, 2020-2024 American Community Survey), and the Census Bureau’s 2019-2023 profile counts 27.9 percent of houses built in 1939 or earlier. About 80 percent of occupied homes heat with gas and about 16 percent with electricity. Older services, close-set lots, three different gas utilities and a county permit package that asks for a sealed survey all shape how a Generac goes in here.

Communities we serve in Cook County
The table lists the twelve most populous municipalities wholly or partly in Cook County, with April 1, 2020 Census counts and straight-line miles from the nearer GSHA office. Cicero and Berwyn were not on our measured list, so their mileage is estimated from neighboring Oak Park and marked approximate.
| Community | Population (2020) | Straight-line miles from nearer office | Note |
|---|---|---|---|
| Chicago | 2,746,388 | 29.9 (Lake Bluff) | To the Loop; North Side about 23. Peoples Gas; City of Chicago permits |
| Elgin | 114,797 | 21.1 (Woodstock) | Also in Kane County |
| Cicero | 85,268 | about 29 (Lake Bluff) | Approximate |
| Schaumburg | 78,723 | 20.8 (Lake Bluff) | Also partly in DuPage County |
| Evanston | 78,110 | 18.1 (Lake Bluff) | Combined sewer system per MWRD |
| Arlington Heights | 77,676 | 14.8 (Lake Bluff) | Nicor Gas |
| Palatine | 67,908 | 15 (Lake Bluff) | Also partly in Lake County |
| Skokie | 67,824 | 17.9 (Lake Bluff) | County Building and Zoning satellite office |
| Des Plaines | 60,675 | 17.1 (Lake Bluff) | Combined and separate sewers per MWRD |
| Orland Park | 58,703 | 44.8 (Lake Bluff) | A small portion lies in Will County |
| Oak Lawn | 58,362 | 39.5 (Lake Bluff) | Southwest suburbs |
| Berwyn | 57,250 | about 30 (Lake Bluff) | Approximate |
Populations: 2020 U.S. Census counts from each municipality’s Wikipedia entry. Distances are approximate straight-line miles; Tinley Park, at 48.9 miles, is the farthest southwest suburb we measured.
Coverage follows our published ZIP-code list. Communities more than 50 miles from both offices are quoted case by case; call (224) 220-3660 with your address and we will confirm.
Generac sizing guidance for Cook County homes
Single-family houses are the market. The Census Bureau’s 2019-2023 profile shows 45.3 percent of Cook County housing units are single-family houses and 54.0 percent are in multi-unit buildings. A home standby generator is a single-family product in practice; condominium and townhouse owners need their association’s approval for the location, the gas connection and the electrical tie-in before any installation can be planned.
Older services first. With more than a quarter of houses built in 1939 or earlier and only 4.4 percent built since 2010, our electricians look at the existing service, meter socket and panel before recommending a transfer switch, because the switch has to match what is actually on the wall. Generac packages its 14 through 28 kW generators with a 200 A service-entrance-rated switch; on an older 100 A service, a smaller generator with a limited-circuit switch, such as Generac’s 10 kW package with its 100 A switch, can be the better fit, or a service upgrade comes first. If a panel change is needed, you hear about it at the estimate, not on install day.
Gas-heated homes. In a typical gas-heated bungalow or older two-story with one central air conditioner, essentials plus air conditioning usually lands on Generac’s 14 kW (rated 14 kW on both fuels) or 18 kW (18 kW propane, 17 kW natural gas). Larger suburban homes in Arlington Heights, Palatine, Schaumburg or Orland Park with two air conditioners often call for the 22 to 28 kW, or a smaller unit with a Generac Load Manager or the ecobee by Generac smart thermostat to stage the second compressor.
Electrically heated homes. About 16 percent of Cook County homes heat with electricity, the highest share in our territory. Electric heat can exceed every other load in the house, so for those homes we calculate it separately and either size up, often to the 26 or 28 kW, or put only part of the heat on the generator.
The sump pump comes first. The Metropolitan Water Reclamation District’s Cook County Flood Response Resource Guide (December 15, 2025) notes that the region’s flat landscape makes it prone to flooding, that many communities have combined sewer systems where sewage and rainwater share pipes, and that basement backups happen when rainwater enters sewers faster than it can flow away; it lists a malfunctioning sump pump among sources of water in a home and points out that most homeowner’s insurance does not cover flooding. A sump pump only protects the basement while it has power, so it is the first circuit we put on the transfer switch.
Permits, utilities and installation considerations
Three gas utilities
Cook County has three natural gas utilities. Nicor Gas serves most suburban communities and some annexed areas of Chicago. Inside the city, Peoples Gas says it delivers natural gas to more than 898,000 customers. Along the lake, North Shore Gas serves about 166,000 customers in 54 communities between Winnetka and the Wisconsin border, while Nicor’s list also names some of the same north-shore villages, so there the utility depends on the address. We confirm it from your gas bill or meter tag before sizing anything. A standby generator is a big gas appliance: Generac lists full-load natural gas use of 243 cubic feet per hour for the 14 kW, 235 for the 18 kW and 316 for the 26 kW, on top of the furnace, water heater and range. In an older house the meter and regulator may have been sized decades ago, so our gas technicians check them first and coordinate any upgrade with Nicor, Peoples or North Shore Gas.
Electric service: ComEd
ComEd’s territory takes in all of Cook County. The transfer switch is installed between ComEd’s meter and your main panel: when utility power drops, it starts the generator and moves the house onto it, and when ComEd returns it transfers back and lets the generator shut down.
Who issues the permit
Most of Cook County is incorporated. According to the Civic Federation, only about 2.4 percent of residents (2010 basis) live in unincorporated areas, and roughly 56 percent of those are in Bremen, Lemont, Leyden, Northfield, Maine and Orland townships. For those addresses, the Cook County Department of Building and Zoning issues the permit. Generator is one of the permit types it accepts online, and its e-permits page currently lists a $100 deposit. The county’s generator permit sheet asks for a plat of survey sealed by an Illinois registered surveyor and not more than five years old, a site plan showing the unit’s distance from every lot line, a single-line diagram of the meter, main panel and transfer switch, cut sheets for the generator and switch, and letters of intent from an electrical contractor and a plumbing contractor registered with the department. The department’s FAQ says references to the National Electrical Code must be removed from drawings, because the county enforces its own 2014 Cook County Electrical Code, and electrical inspections are scheduled with the township’s field inspector. The permit sheet dates from 2015 and lists a different deposit formula than the current e-permits page, so we confirm fees with the department when we apply. Inside the City of Chicago or an incorporated suburb, the county cannot process the permit; it comes from the city or village building department. GSHA prepares the drawings and package, pulls the permit and meets the inspectors either way.
Placement on close-set lots
Generac allows its units as close as 18 inches to a structure, away from doors, windows and fresh air intakes and subject to local codes, and every current air-cooled size shares the same 46.4 by 26.3 inch enclosure. On a narrow Cook County lot the location is usually decided by the side-yard width, the distance to the neighbor’s windows, the gas meter location and the local setback, not by the generator’s size. The county’s permit sheet wants the distance from every lot line drawn on the site plan, and many villages have similar requirements, so we measure it at the estimate. Generac rates its units at 61 to 67 dB(A) at 23 feet under load and 49 to 55 dB(A) during Quiet-Test exercise, and on close lots we schedule the exercise for a daytime slot.
Wells and septic
Private wells and septic systems still exist in parts of the county. The Cook County Department of Public Health reviews and approves private sewage disposal systems throughout the county except in incorporated Barrington Hills, Inverness, Palos Park and South Barrington, which have their own septic ordinances, and Building and Zoning requires the health department’s approval before projects involving wells and septic. If your home is on a well, the pump goes on the generator’s load list and affects which Generac size we recommend.
Generac products we install in Cook County
The full Generac air-cooled line and its accessories are available county-wide. The size table and installation details are on the main Generac page.

Generators, 10 to 18 kW
Older homes, smaller services and essentials systems, plus typical one-air-conditioner houses.
Featured: 10 kW (7257), 14 kW (7258), 18 kW (7259)
Explore Generac generator sizes
Generators, 22 to 28 kW
Larger suburban homes, two air conditioners and electrically heated houses.
Featured: 22 kW (7260), 24 kW (7261), 26 kW (7327), 28 kW (7282)
Compare Generac sizesTransfer Switches & Load Management
Chosen after a check of the existing service and panel; limited-circuit or service-entrance-rated.
Featured: 7321 and 7323-7329 packages, Load Manager 50 A / 100 A
How we install the switchMobile Link & Maintenance
Cellular Mobile Link is standard on current models. Service is dispatched from Lake Bluff.
Basic (free) and Premium plans; Service Schedule A / B
Generator maintenanceCurrent Generac offers
Ask GSHA about current Generac offers.
Generac promotions carry their own model lists and dates, so we confirm which one, if any, applies to your generator and installation date in the written quote. Financing through Synchrony and Service Finance is available to qualified buyers, subject to credit approval. See financing options.
Questions and answers
Do you install in the city of Chicago, or only the suburbs?
Both. The Loop is about 30 straight-line miles from our Lake Bluff office and the North Side about 23. Inside Chicago the gas utility is Peoples Gas, with Nicor in some annexed areas, and the permit comes from the City of Chicago rather than Cook County. We run the gas-load check, coordinate any meter upgrade and pull the city permit.
Do I need a permit in unincorporated Cook County?
Yes. The Cook County Department of Building and Zoning issues generator permits for unincorporated areas and requires a sealed plat of survey, a site plan with lot-line distances, a single-line diagram, equipment cut sheets and letters of intent from registered electrical and plumbing contractors. GSHA prepares that package and pulls the permit.
Which gas utility will you coordinate with?
It depends on your address: Nicor Gas in most suburbs, Peoples Gas in Chicago, and North Shore Gas in north-shore suburbs between Winnetka and the Wisconsin border, where Nicor also serves some villages. We confirm it from your bill at the estimate.
My house is old. Can it still take a whole-house Generac?
Usually, but it may need electrical work first. We check the service size, the meter socket and the panel. If the service is too small or the panel is full, the options are a service upgrade followed by a whole-house switch, or a smaller Generac on a limited-circuit switch that backs up only the essentials.
Can I install a Generac at my condo or townhouse?
Only with your association’s approval of the location and the gas and electrical connections. Bring us the association’s requirements and we will tell you whether an installation is practical.
What affects the installed price in Cook County?
The generator size and switch, any service or panel upgrade an older home needs, the length of the gas run, a utility meter upgrade, the survey and drawings a permit requires, cold-weather accessories and the permit fee. Every job is quoted in writing after a free on-site estimate.
Which Generac offers apply right now?
Ask GSHA about current Generac offers; we confirm eligibility for your model and installation date when we quote.
More Generac pages
Authorized Generac dealer in Illinois (main page) · Generac generator sizes · Generac error codes · Battery problem alarm · Generator error codes, all brands · Generator installation
Other counties
Request a free Generac installation estimate
Tell us about your Cook County home and what you want running during an outage. We will follow up to schedule a free, no-obligation in-home visit, check your service, panel and gas meter, measure the lot for placement, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA estimator reviews your loads, panel and gas supply and explains the Generac options that fit.
Written quote
You receive an itemized quote with the generator, transfer switch, permits, warranty registration and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Generac dealer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Generac generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
GSHA Services, LTD is an independent authorized Generac dealer. Generac® is a registered trademark of Generac Power Systems, Inc.
Sources
- Census Reporter API, ACS 2024 5-year (2020-2024) tables B25040 and B25035, Cook County (05000US17031) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040&geo_ids=05000US17031 (accessed 2026-10-23)
- U.S. Census Bureau ACS 2019-2023 Narrative Profile: Cook County (housing type and age) — https://www.census.gov/acs/www/data/data-tables-and-tools/narrative-profiles/2023/report.php?geotype=county&state=17&county=031 (accessed 2026-10-23)
- Cook County, Illinois (Wikipedia: 2020 Census places table) — https://en.wikipedia.org/wiki/Cook_County,_Illinois (accessed 2026-10-23)
- Chicago (Wikipedia: 2020 Census) — https://en.wikipedia.org/wiki/Chicago (accessed 2026-10-23)
- Nicor Gas, Where We Are (county service lists) — https://www.nicorgas.com/company/where-we-are.html (accessed 2026-10-23)
- Peoples Gas, Service Area — https://www.peoplesgasdelivery.com/company/area (accessed 2026-10-23)
- North Shore Gas, About — https://www.northshoregasdelivery.com/company/about (accessed 2026-10-23)
- Commonwealth Edison (Wikipedia: service territory) — https://en.wikipedia.org/wiki/Commonwealth_Edison (accessed 2026-10-23)
- Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (accessed 2026-10-23)
- Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-10-23)
- Cook County Generator Installation Permit Requirements (rev. 08/04/2015) — http://www.cookcountyil.gov/sites/g/files/ywwepo161/files/service/generatorinstallationrequirements.pdf (accessed 2026-10-23)
- Cook County Building and Zoning FAQ (November 2020) — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/faq-building_and_zoning.pdf (accessed 2026-10-23)
- Cook County Building and Zoning Code Posting (2021 code adoption) — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/documents/2024-03/Code%20Posting%202023.pdf (accessed 2026-10-23)
- Civic Federation: Unincorporated Areas of Cook County (December 9, 2014) — https://www.civicfed.org/sites/default/files/REPORT_UnincorporatedAreasofCookCounty.pdf (accessed 2026-10-23)
- Cook County Department of Public Health: Septic Systems — https://cookcountypublichealth.org/environmental-health/water-and-sewage/septic/ (accessed 2026-10-23)
- MWRD Cook County Flood Response Resource Guide (12/15/2025) — https://www.mwrd.org/sites/default/files/2025-12/Flood_Resource_Guide_251215.pdf (accessed 2026-10-23)
- Generac spec sheet, 10/14/18 kW air-cooled standby generator — https://productmanuals.generac.com/api/manualfiles/G0072580/A0005151081/0 (accessed 2026-10-23)
- Generac spec sheet, 22-28 kW air-cooled standby generator — https://productmanuals.generac.com/api/manualfiles/G0072600/A0005151077/0 (accessed 2026-10-23)
- GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
