Authorized Williams dealer · Will County, IL
Williams Wall Furnaces Installed in Will County, IL
GSHA Services, LTD is an authorized Williams dealer and installer serving Will County homeowners from Joliet and Plainfield to New Lenox, Bolingbrook and Romeoville. We have no office in Will County: estimators, installers and our own licensed electricians are dispatched from our Woodstock office in McHenry County and our Lake Bluff office in Lake County. We supply and install Williams direct-vent wall furnaces, Forsaire counterflow furnaces, Monterey top-vent furnaces, floor furnaces and vented console heaters, pull the municipal permit and meet the inspector.
Will County’s housing is the newest in our area: the median home was built in 1992, 87.9 percent of occupied homes heat with utility gas, 9.3 percent with electricity and 2.0 percent with bottled or LP gas, and 82.8 percent are owner-occupied (Census Bureau ACS 2024 five-year estimates). In a newer house the central furnace is usually fine; the Williams opportunity is the space it was never designed for, such as a bonus room over a three-car garage, a basement finished years after move-in, a three-season room, or the garage and workshop themselves.
Communities we serve in Will County
GSHA’s published service-area ZIP list includes Joliet, the county seat, whose limits also reach into Kendall County; New Lenox, Crest Hill and Romeoville, entirely within Will County; Plainfield, partly in Kendall County; Bolingbrook, shared with DuPage; and Channahon, which extends into Grundy County. Four more listed communities are mostly outside Will County but include Will County neighborhoods: Naperville (mostly DuPage, with its own municipal electric utility), Aurora, Lemont and Tinley Park. In a cross-county town, the building department and electric utility depend on which side of the line the house sits.
Lockport and Frankfort are also on the published list, but Crete is not. If you live there or elsewhere in southern Will County, please confirm your address at (224) 220-3660 or through the estimate form before scheduling. The complete list is on the GSHA service area page.
Choosing a Williams unit for a Will County home
Bonus rooms and finished basements. A room over the garage is often the hardest space in a 1990s or 2000s house to keep warm: it has outside air on several sides and sits at the end of the longest duct run. A Williams direct-vent gravity wall furnace on an exterior wall of that room, at 14,000, 22,000 or 30,000 BTU/hr input, gives it its own heat and thermostat and needs no electricity. A finished basement with an exterior wall above grade can take the same unit, or the low-profile 7,400 or 17,700 BTU/hr high-efficiency direct-vent model, which mounts on the wall with no floor space and has a maximum wall thickness of about 19 1/2 inches.
Garages and workshops. Williams markets three direct-vent lines for garages and workshops: Direct-Vent Counterflow, with a blower and a 4-foot power cord, at 40,000 to 60,000 BTU/hr and 77 to 80 percent AFUE; Direct-Vent Gravity, which works during power outages; and Direct-Vent High-Efficiency, which uses no inside air for combustion. All come with the vent materials, and a thin-wall collar handles garage walls from 1 to 5 inches thick. For a large or tall garage, our garage heater installation page covers unit heaters, and we compare both on site.
Three-season rooms and larger spaces. For a room with a lot of glass or an open plan, a Forsaire counterflow furnace adds a one- or two-speed blower (240 to 440 CFM) and is rated up to 80 percent AFUE, in top-vent models from 35,000 to 65,000 BTU/hr or direct-vent models from 40,000 to 60,000 BTU/hr. Optional outlet kits can deliver heat to up to three rooms.
Propane and electric homes. About 2 percent of Will County homes heat with bottled or LP gas, mostly beyond the gas mains. Williams makes propane versions of each model and lists conversion kits by size. In the roughly 9 percent of homes heated with electricity, the Williams Solana electric counterflow furnace or a ductless heat pump is the comparison where gas is not available.
Permits, utilities and installation considerations
In Will County the contractor pulls the permit and the municipality inspects the work. GSHA handles the application, Williams spec sheets, contractor registration and inspections. Here is what the municipalities we checked publish.
- Village of New Lenox. The Miscellaneous Permits Guide requires a permit for furnaces, submitted with the manufacturer’s specifications whether the unit is a direct replacement or an upgrade, with any change to the venting described on the application. It requires a programmable thermostat with a furnace and a final inspection; allow three to five working days, and an emergency installation still needs the application filed the next business day. Contractors must register with the village.
- City of Lockport. The building permit FAQ requires permits for mechanical-system replacements and treats HVAC as an over-the-counter permit; the HVAC Replacement application asks for spec sheets and wiring by a licensed electrician, which applies to the blower-equipped Williams models (Building Services).
- City of Joliet. The building code page requires contractor registration, a Certificate of Insurance, a per-project Letter of Intent and a Joliet-accepted HVAC contractor license. The contractor, not the homeowner, must pull the permit, and permits are not issued over the counter (residential permit information).
- Village of Plainfield. Permits go through the Permitting & Licensing Portal, and the building codes page lists the adopted mechanical, fuel gas and electrical codes. The pages do not spell out the furnace replacement rule, so GSHA confirms it with the Building Department.
- Unincorporated Will County. The Land Use Department Building Section permits through its SmartGov portal. Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment, with an emergency-repair exception if the permit is applied for the next business day, and every contractor must be registered with the county. A furnace in a detached outbuilding on a rural parcel goes through this office.
- Other municipalities (Bolingbrook, Romeoville, Crest Hill, Channahon, Naperville, Aurora, Lemont, Tinley Park) have their own building departments; GSHA confirms the requirement for your address before scheduling.
Thermostats and venting changes
New Lenox requires a programmable thermostat with a furnace installation and asks for any venting change on the application. Most Williams gravity models use a millivolt gas valve and a separately sold thermostat, so GSHA specifies a programmable thermostat compatible with that control; the 7,400 BTU/hr high-efficiency unit has a seven-day programmable timer built in. Because a direct-vent Williams unit creates a new wall penetration, GSHA describes the vent location and wall on the permit and installs the Williams vent kit to the manufacturer’s instructions.
Utilities
Nicor Gas’s service territory names Will County communities including Aurora, Bolingbrook, Channahon, Crest Hill, Frankfort, Crete and Joliet, and New Lenox, Lockport and Plainfield name Nicor Gas on their own resident pages; a ZIP lookup on nicorgas.com is the definitive check. ComEd delivers electricity in New Lenox, Lockport, Plainfield and Joliet, while most of Naperville, including its Will County portion, is served by the city’s municipal electric utility. Nicor’s 2026 residential rebates list furnace tiers at 95 and 97 percent AFUE, which the Williams models we install do not reach, so a Williams unit is budgeted without that rebate.
Gas, electrical and what GSHA handles
GSHA sizes and runs the gas line to the new furnace and installs the shut-off; meter-capacity questions go to Nicor Gas. A Forsaire counterflow, the 17,700 BTU/hr high-efficiency model or an optional blower needs a 115 to 120 volt supply, and Lockport requires a licensed electrician for that wiring; GSHA’s own licensed electricians do it on every job. GSHA files the permit with the Williams spec sheets, meets the inspector, lights and tests the unit, and walks you through the thermostat and pilot.
Williams products we install in Will County
The same Williams lines are available county-wide. Full models, ratings and spec-sheet details are on the main Williams page.
Garage & Workshop
Direct-vent counterflow, gravity and high-efficiency models for garages.
Natural or propane
Garage heatersDirect-Vent Wall Furnaces
Gravity units vented through the wall; no electricity required.
14,000 / 22,000 / 30,000 BTU/hr
DetailsHigh-Efficiency Direct-Vent
Low-profile sealed-combustion wall units for small rooms and garages.
7,400 / 17,700 BTU/hr
DetailsForsaire Counterflow
Blower-equipped, up to 80% AFUE, top-vent or direct-vent.
35,000-65,000 BTU/hr
DetailsMonterey Top-Vent
Recessed or surface-mount gravity furnace vented through the roof.
25,000 / 35,000 / 50,000 BTU/hr
DetailsFloor Furnaces
Blower-free furnace under a floor register; no electricity.
45,000 / 60,000 BTU/hr
DetailsVented Room Heaters
Enclosed or glass-front console heaters; optional blower.
20,000-65,000 BTU/hr
DetailsSolana Electric
Electric counterflow furnace for spaces without gas.
Freestanding or recessed
DetailsCurrent Williams offers
Ask GSHA about current Williams offers.
Financing programs available through GSHA are on our financing page.
Questions and answers
Do you serve my Will County address?
Yes if you are in Joliet, New Lenox, Crest Hill, Romeoville, Plainfield, Bolingbrook or Channahon, or the Will County parts of Naperville, Aurora, Lemont or Tinley Park. Lockport and Frankfort are on the list as well; Crete and other southern Will County addresses are confirmed by phone first at (224) 220-3660.
Can a Williams furnace heat the bonus room over my garage?
Usually, yes, if the room has an exterior wall for the vent and a gas line can reach it. A direct-vent gravity model needs no electricity; a Forsaire direct-vent counterflow adds a blower for larger rooms. We size it from the room’s heat loss.
Is a Williams wall furnace allowed in an attached garage?
Williams markets direct-vent counterflow, gravity and high-efficiency direct-vent models for garages and workshops. Codes add requirements for fuel-burning appliances in garages, so GSHA confirms placement and protection with your municipality as part of the permit.
Why does New Lenox want a programmable thermostat?
The village’s permit guide requires one with any furnace installation. GSHA specifies a programmable thermostat compatible with the Williams model’s controls, or uses the built-in seven-day timer on the 7,400 BTU/hr high-efficiency model.
Does Joliet let homeowners pull the permit?
Joliet requires the contractor, not the homeowner, to pull the permit, and requires a Joliet-accepted HVAC contractor license and contractor registration. GSHA handles that paperwork.
Will Nicor give me a rebate?
Not under Nicor’s 2026 furnace rebate, which starts at 95 percent AFUE. Williams furnaces are rated at or below 80 percent AFUE and are chosen for zone heating, not for a rebate.
What warranty does Williams provide?
Williams states a 10-year limited warranty on the combustion chamber and one year on other parts, contingent on installation by a qualified installer.
More Williams and heating pages
Williams authorized dealer in Illinois (main page) · Garage heater installation · Furnace installation · Furnace repair
Other counties
Request a free Williams installation estimate
Tell us about the room, garage or workshop you want to heat in Will County. We will schedule a free, no-obligation visit, measure the space, choose the vent wall, check the gas line and any electrical needs, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
On-site visit
A GSHA comfort advisor measures the space, checks venting, gas and power, and explains the Williams options that fit.
Written quote
You receive an itemized quote with the equipment, vent kit, thermostat, gas piping, any electrical work and the permit. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Williams dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and Lake Bluff, IL. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API, ACS 2024 5-year tables B25003, B25035, B25040, Will County, IL (05000US17197) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25003,B25035,B25040&geo_ids=05000US17197 (accessed 2026-09-16)
- Williams Garage and Workshop Heaters page — https://williamscomfort.com/products/furnaces/williams/garage-workshop-heaters/ (accessed 2026-10-23)
- Williams Garage Furnaces spec sheet L1171 — https://williamscomfort.com/wp-content/uploads/2023/09/L1171_Garage_spec_sheet_4_21-1.pdf (accessed 2026-10-23)
- Williams Direct-Vent spec sheet L1109 (June 2026) — https://williamscomfort.com/wp-content/uploads/2026/06/L1109_Direct_Vent_specSheet_6_26.pdf (accessed 2026-10-23)
- Williams High-Efficiency Direct-Vent spec sheet L1457 — https://williamscomfort.com/wp-content/uploads/2023/09/L1457_High_Efficiency-DV_spec_sheet-8_25.pdf (accessed 2026-10-23)
- Williams Forsaire spec sheet L1158 (June 2026) — https://williamscomfort.com/wp-content/uploads/2026/06/L1158_Forsaire_spec_sheet_EN_6_26.pdf (accessed 2026-10-23)
- Williams Solana Electric Counterflow Furnace — https://williamscomfort.com/product/solana-electric-counterflow-furnace/ (accessed 2026-10-23)
- Village of New Lenox – Miscellaneous Permits Guide — https://www.newlenox.net/DocumentCenter/View/113 (accessed 2026-09-16)
- Village of New Lenox – contractor registration FAQ — https://www.newlenox.net/m/faq?cat=16 (accessed 2026-09-16)
- City of Lockport – building permit FAQ — https://www.cityoflockport.net/Faq.aspx?QID=68 (accessed 2026-09-16)
- City of Lockport – HVAC Replacement application — https://www.cityoflockport.net/DocumentCenter/View/7049 (accessed 2026-09-16)
- City of Lockport – Building Services — https://cityoflockport.net/133/Building (accessed 2026-09-16)
- City of Joliet – Building Code Information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-code-information (accessed 2026-09-16)
- City of Joliet – Building Permit Forms — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-permit-forms (accessed 2026-09-16)
- City of Joliet – Residential Building Permit Information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/residential-building-permit-information (accessed 2026-09-16)
- Village of Plainfield – Building and Code Enforcement — https://www.plainfieldil.gov/departments/building-and-code-enforcement (accessed 2026-09-16)
- Village of Plainfield – Building Codes — https://www.plainfieldil.gov/departments/building-and-code-enforcement/building-codes (accessed 2026-09-16)
- Will County Land Use Department – Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-09-16)
- Will County Building Ordinance Sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-09-16)
- Will County contractor registration — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (accessed 2026-09-16)
- Nicor Gas – Where We Are — https://www.nicorgas.com/company/where-we-are.html (accessed 2026-09-16)
- City of Naperville – Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
- Nicor Gas Residential Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
- GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
