Authorized Mitsubishi Electric dealer · Cook County, IL
Mitsubishi Electric Dealer Serving Cook County, IL
GSHA Services, LTD is an authorized Mitsubishi Electric dealer and installer working in Cook County’s northern, northwestern and near-western suburbs, plus Tinley Park and Lemont. We have no office in Cook County: most Cook work is dispatched from our Lake Bluff office and the county’s northwest edge from Woodstock. On every Mitsubishi job we run a room-by-room load calculation, install the ductless, multi-zone, ducted or intelli-HEAT system, have our own licensed electricians do the wiring, pull the municipal or county permit, commission the system and register the Mitsubishi warranty.
Cook County’s housing is the oldest in our service area. The median home was built in 1961, about 28 percent of housing units date from 1939 or earlier, and more than half of all units are in buildings with two or more units (U.S. Census Bureau, ACS 2020-2024). Natural gas heats about 80 percent of occupied homes and electricity about 16 percent. That mix is why ductless systems are so common here: older houses with radiators and no ducts, bungalows with hot second floors, and condos and townhomes where a compact heat pump is the only practical way to add efficient heating and cooling.

Communities we serve in Cook County
Our service-area ZIP list covers the northwest suburbs of Arlington Heights, Palatine, Des Plaines, Park Ridge, Mount Prospect, Prospect Heights, Wheeling, Rolling Meadows, Elk Grove Village, Schaumburg, Hoffman Estates and Streamwood; the north suburbs of Glenview, Northbrook, Morton Grove, Golf, Skokie, Wilmette, Kenilworth, Winnetka and Glencoe; the near-west suburbs of Franklin Park, Schiller Park, River Grove, Melrose Park, Hillside, Berkeley, Broadview and Westchester; and Tinley Park and Lemont to the south. Barrington and Buffalo Grove are partly in Lake County, Bartlett in DuPage and Kane, Hanover Park in DuPage, Lemont in DuPage and Will, and Tinley Park in Will; the municipality your address belongs to decides the permit office.
Only some City of Chicago ZIP codes are on the list. Our crews have worked at individual Chicago addresses, but Chicago homeowners should confirm their address first, as should residents of Cicero, Berwyn and other suburbs not listed. The full list is on the GSHA service area page; if your ZIP is missing, call (224) 220-3660.
Mitsubishi Electric guidance for Cook County homes
Older homes with radiators. In a house built before 1940, the heat often comes from a boiler and cast-iron radiators and there is no ductwork for central air. A multi-zone Mitsubishi system adds cooling and efficient heat without opening plaster walls: Mitsubishi says one multi-zone outdoor unit can connect to up to eight ductless or ducted indoor units. Wall-mounted units serve bedrooms, the MFZ-KX floor console can sit where a radiator once stood, and an SEZ-NL low-static ducted unit tucked into an attic knee wall can serve two small rooms through short runs. The boiler can stay as the backup or primary heat, and the heat pump takes over the shoulder seasons and summer.
Bungalows and hot second floors. Expanded bungalow attics and 1950s and 1960s second-floor bedrooms are the rooms the original systems served worst. A single-zone or two-zone system with wall units such as the MSZ-JX or MSZ-HX, listed by Mitsubishi at up to 20 SEER2 and down to 22 dB(A), fixes the floor; the MLZ-KX ceiling cassette, designed to fit between standard 16-inch joists, works where a finished attic has sloped walls and no room for a wall unit.
Condos, townhomes and electric-heat homes. With more than half of Cook County’s housing in multi-unit buildings and about 16 percent of homes on electric heat, a compact Mitsubishi heat pump is often the replacement for electric baseboards or a worn-out through-wall unit. Mitsubishi states its Hyper-Heating INVERTER (H2i) systems deliver 100% of rated heating capacity at 5°F, with operation continuing below zero to limits that vary by system, so the heat pump can be the primary heat. In a condo or townhome the association usually controls where the outdoor unit and line sets can go, and GSHA prepares the drawings and specification sheets the board asks for before anything is installed.
Gas homes: intelli-HEAT. For a gas-heated single-family home with a furnace and ducts, Mitsubishi’s intelli-HEAT adds a PAA-NL heat pump coil on top of the furnace and uses the existing ductwork. The heat pump replaces the air conditioner and carries most of the heating; the furnace takes over automatically in extreme cold. Mitsubishi requires an ANSI Z21.47/CSA 2.3 certified furnace. In an older home we also look at the chimney and the ducts, because a furnace that shares a chimney with a water heater, or ducts sized for heating only, change what we recommend.
Permits, utilities and installation considerations
Permits and inspections
Nearly every Cook County address is inside a municipality with its own HVAC permit; the Cook County Department of Building and Zoning handles only unincorporated areas and Forest Preserve land and cannot process permits for Chicago or incorporated suburbs (e-Permits). GSHA applies for the permit with the Mitsubishi specification sheets and site plan, and meets the inspector. Fees below are as each municipality published them and can change.
- Arlington Heights lists furnace and rear-yard air conditioner replacements as over-the-counter permits; its AC guide asks for a site plan or plat showing the unit’s distance from property lines and treats a new location as a new unit, so a new ductless outdoor unit is reviewed for placement.
- Palatine requires a permit for “replacing or installing an air conditioning, heating unit or water heater” (when a permit is required). Its 2026 AC handout lists a $103 fee per item, a possible five-day plan review and a final inspection with access to the electrical panel.
- Des Plaines takes applications through its online portal (Building and Permits); City Code 10-13-3 lists HVAC/mechanical remove-and-replace at $75 for one- and two-family homes; a new installation is permitted under the city’s mechanical fee schedule.
- Park Ridge requires a permit for heating and air conditioning work and schedules inspections with a normal one-to-two-working-day wait (Permits and Inspections).
- Unincorporated Cook County uses an HVAC permit application that asks for the new equipment’s make, model and efficiency, any line-set or duct changes, and a Cook County-registered HVAC contractor (Building and Zoning).
- City of Chicago (confirm your address first) exempts only in-kind replacement of a furnace or air conditioner of the same type, size and shape in a residential building up to four stories (Department of Buildings), so a new ductless system needs a permit.
Where the outdoor unit can go
Cook suburbs set specific yard rules, and on narrow older lots they decide where a mini-split outdoor unit can sit. Arlington Heights treats central air compressors as a rear-yard obstruction at least 10 percent of the lot width from the side property line (Zoning Chapter 28). Palatine allows a rear or side yard (elsewhere if that yard faces a street), no more than a three-foot projection into a required yard, and requires a fused disconnect within sight of the unit and rigid conduit outdoors (2026 AC handout). Des Plaines allows HVAC equipment in side and rear yards only, at least five feet from side and rear lot lines (City Code 12-7-1(C)). Park Ridge allows the front, corner side or rear yard, bars new units from the minimum interior side yard except as a same-location replacement, and requires full screening from public view (Section 11.4(i)). A wall bracket on the rear of the house often satisfies these rules and keeps the unit above the snow. None of the codes we checked sets a residential decibel limit, but associations can be stricter.
Utilities and incentives
Nicor Gas serves most of the Cook suburbs on our list, Peoples Gas serves Chicago and North Shore Gas serves the communities from Winnetka north, so we confirm the gas utility from your bill along the north shore. ComEd is the electric utility everywhere on our list except Winnetka, whose municipal electric department means ComEd’s residential programs do not apply there. For a Mitsubishi heat pump, ComEd’s Home Heating & Cooling Discounts advertise instant discounts on heat pumps and ductless mini-splits through its contractor network, subject to eligibility and funding. The gas utilities’ residential rebates from Nicor Gas, Peoples Gas and North Shore Gas are aimed at gas furnaces and thermostats; Peoples Gas and North Shore Gas require a chimney liner when a new furnace leaves a water heater alone on the chimney, which matters if an intelli-HEAT project includes a new furnace. Check current eligibility with each utility, and ask GSHA which programs your equipment qualifies for.
Electrical and what GSHA handles
Many older Cook County homes still have small electrical services. GSHA’s own licensed electricians check the panel at the estimate, install the dedicated circuit, fused disconnect and outdoor conduit, and handle any service upgrade under the same permit. We pressure-test and evacuate the line sets, run them in covers or through closets, route condensate to a drain or pump, commission the system, set up the controls and Comfort app where supported and register the Mitsubishi warranty; financing is described on GSHA’s financing page.
Mitsubishi Electric products we install in Cook County
The same eight categories are available county-wide. Models, published ratings and sources are on the main Mitsubishi Electric page.

Wall-Mounted Ductless
Single rooms, additions and open areas, alone or as part of a multi-zone system.
MSZ-FX, GX, EX, JX, WX, HX
DetailsFloor-Mounted
A low console where a radiator or baseboard heater used to be.
MFZ-KX
DetailsCeiling Cassettes
Recessed units that keep walls clear in kitchens and basements.
MLZ-KX, SLZ-NL
DetailsDucted Air Handlers
Whole-home heat pumps on existing ducts, or short-run units for one or two rooms.
SVZ-NL, PVA-NL, SEZ-NL
DetailsMulti-Zone Systems
One outdoor unit, up to eight indoor units, a setting for every room.
MXZ, SMART MULTI H2i
Detailsintelli-HEAT Dual Fuel
A heat pump coil on your gas furnace, with automatic switchover in extreme cold.
PAA-NL
DetailsControls & Comfort App
Wall controllers and smartphone control for select systems.
Comfort app, MHK2
DetailsLossnay Ventilation
Energy recovery ventilation for tighter homes and additions.
Residential Ducted Lossnay ERV
DetailsCurrent Mitsubishi Electric offers
Ask GSHA about current Mitsubishi Electric offers.
Promotions change through the year and name their own equipment and dates, so we confirm what applies to your system and installation date at the estimate. Financing through Synchrony and Service Finance is described on our financing page.
Utility incentives are separate from manufacturer offers and depend on whether ComEd or Winnetka’s municipal utility serves your home; we confirm what applies at the estimate rather than promising an incentive up front.
Questions and answers
Do you serve my address in Cook County?
Yes, if it is in a listed suburb in the northwest, north or near-west areas, or Tinley Park or Lemont. Chicago addresses and suburbs not on the ZIP list are confirmed one at a time; call (224) 220-3660.
We have radiators and no ducts. Can we add air conditioning?
Yes. A multi-zone Mitsubishi system adds cooling and efficient heat without ductwork, using wall units, floor consoles or short-run ducted units connected to one outdoor unit. The boiler can stay in place.
Can a mini-split go in a condo or townhome?
Usually, with the association’s approval. The board typically controls outdoor unit location, wall penetrations and line-set routing. GSHA prepares the plan and Mitsubishi specification sheets for the board, then files the municipal permit once the association approves.
Does a new mini-split need a permit in Chicago?
Yes. Chicago’s permit exemption covers only in-kind replacement of a furnace or air conditioner of the same type, size and shape, so a new ductless system needs a permit. Chicago addresses must be confirmed with GSHA first.
Where can the outdoor unit go in Park Ridge or Des Plaines?
Park Ridge allows front, corner side or rear yards with full screening and bars new units from the minimum interior side yard; Des Plaines allows side and rear yards at least five feet from the lot lines. GSHA lays out the unit and line-set route on the site plan.
I live in Winnetka. Do ComEd heat-pump discounts apply?
No. Winnetka has a municipal electric department, so ComEd’s residential programs do not apply there; ask the village about its own programs. Elsewhere on our Cook County list, ComEd is the electric utility.
Are there Mitsubishi Electric offers right now?
Ask GSHA about current Mitsubishi Electric offers. We confirm what applies to your equipment and installation date when you book.
What affects the installed price?
The number of zones and indoor unit types, the outdoor unit’s cold-climate capacity, line-set length and routing in an older house, wall-bracket mounting, electrical service work, association requirements and your municipality’s permit fee. Published single-zone pricing is on our Mitsubishi ductless page; every job is confirmed by a free in-home estimate.
More Mitsubishi Electric pages
Authorized Mitsubishi Electric dealer in Northern Illinois (main page) · Mitsubishi ductless prices and installation · Ductless systems · Best ductless brands for home additions
Other counties
Request a free Mitsubishi Electric installation estimate
Tell us about your Cook County home and the rooms you want to heat and cool. We will follow up to schedule a free, no-obligation in-home visit, measure the load room by room, check where the outdoor unit and lines can go and look at your electrical panel, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA comfort advisor measures the rooms, checks the existing system and explains the Mitsubishi Electric options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing, water treatment and generator contractor and an authorized Mitsubishi Electric dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API — ACS 2020-2024 5-year tables B25034, B25035, B25040, B25024, Cook County (05000US17031) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25034,B25035,B25040,B25024&geo_ids=05000US17031 (accessed 2026-09-16)
- Cook County — e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-09-16)
- Cook County — HVAC Permit Application — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/documents/2022-03/HVAC%20Permit%20Application%202022.pdf (accessed 2026-09-16)
- Cook County — Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (accessed 2026-09-16)
- Village of Arlington Heights — Over-the-counter permits — https://www.vah.com/over_the_counter_permits/index.php (accessed 2026-09-16)
- Village of Arlington Heights — HVAC Air Conditioning Replacement guide — https://www.vah.com/HVAC%20-%20Air%20Conditioning%20-%20Replacement.pdf (accessed 2026-09-16)
- Village of Arlington Heights Zoning Chapter 28 — https://library.municode.com/il/arlington_heights/codes/municipal_code?nodeId=CH28ZORE (accessed 2026-09-16)
- Village of Palatine — When a Building Permit is Required — https://www.palatine.il.us/621/When-a-Building-Permit-is-Required (accessed 2026-09-16)
- Village of Palatine — 2026 AC Replacement Handout — https://www.palatine.il.us/DocumentCenter/View/710/AC-Replacement-Handout-PDF (accessed 2026-09-16)
- City of Des Plaines — Building and Permits — https://www.desplainesil.gov/Departments/Community-and-Economic-Development/Building-and-Permits (accessed 2026-09-16)
- City of Des Plaines City Code 10-13-3 (fees) — https://codelibrary.amlegal.com/codes/desplainesil/latest/desplaines_il/0-0-0-6936 (accessed 2026-09-16)
- City of Des Plaines City Code 12-7-1(C) (yards) — https://codelibrary.amlegal.com/codes/desplainesil/latest/desplaines_il/0-0-0-7739 (accessed 2026-09-16)
- City of Park Ridge — Permits and Inspections — https://www.parkridge.us/your_government/city_departments/permits_and_inspections_2.php (accessed 2026-09-16)
- City of Park Ridge Zoning Ordinance Section 11.4 — https://library.municode.com/il/park_ridge/codes/zoning_ordinance?nodeId=S11SIDEST (accessed 2026-09-16)
- City of Chicago Department of Buildings — Mechanical work not requiring a permit — https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/help/faq/DOB/bldg-permit-not-required/worktype/mechanical.html (accessed 2026-09-16)
- American Public Power Association — Public Power in Illinois (Winnetka) — https://www.publicpower.org/public-power-illinois (accessed 2026-09-16)
- Nicor Gas — Residential Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
- Peoples Gas — Residential rebates — https://www.peoplesgasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
- North Shore Gas — Residential rebates — https://www.northshoregasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
- ComEd — Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
- Mitsubishi Electric — Wall-mounted products — https://www.mitsubishicomfort.com/products/wall-mounted (accessed 2026-10-23)
- Mitsubishi Electric — Ducted solutions — https://www.mitsubishicomfort.com/products/ducted-solutions (accessed 2026-10-23)
- Mitsubishi Electric — Ceiling cassettes — https://www.mitsubishicomfort.com/products/ceiling-cassette (accessed 2026-10-23)
- Mitsubishi Electric — MFZ-KX floor-mounted unit — https://www.mitsubishicomfort.com/products/m-series/mfz-kx (accessed 2026-10-23)
- Mitsubishi Electric — intelli-HEAT dual fuel system — https://www.mitsubishicomfort.com/intelli-heat (accessed 2026-10-23)
- Mitsubishi Electric — Mythbusters: heat pumps for extreme cold climates — https://www.mitsubishicomfort.com/blog/mythbusters-heat-pumps-for-extreme-cold-climates (accessed 2026-10-23)
- GSHA Services — Service area (ZIP list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
