Authorized Peerless dealer · Cook County, IL
Authorized Peerless Boiler Dealer Serving Cook County, IL
GSHA Services, LTD is an authorized Peerless dealer and installer serving Cook County’s northern, northwestern and near-western suburbs, plus Tinley Park and Lemont. We have no office in Cook County: most Cook County work is dispatched from our Lake Bluff office, and the northwest edge is handled from Woodstock. The Peerless Series MI-e pictured on this page was installed by GSHA crews in Hickory Hills, in southwest Cook County, in December 2024. Every boiler job includes the heat-loss calculation, removal of the old boiler, piping, venting, gas, controls wiring by our own licensed electricians, the permit and inspection, start-up and Peerless warranty registration.
Cook County has the oldest housing we serve, which makes it Peerless country. The median home was built in 1961, about 28 percent of housing units date from 1939 or earlier, and about 73 percent were built before 1980 (U.S. Census Bureau, ACS 2020-2024). Natural gas heats about 80 percent of occupied homes. Cast-iron radiators, one-pipe steam, two-flats with a boiler in the basement and North Shore houses with large hot-water systems are everyday work here, and PB Heat’s cast-iron hot-water, steam and condensing boilers cover all of them.

Communities we serve in Cook County
GSHA’s service-area ZIP list covers Arlington Heights, Palatine, Des Plaines, Park Ridge, Mount Prospect, Prospect Heights, Wheeling, Rolling Meadows, Elk Grove Village, Schaumburg, Hoffman Estates and Streamwood in the northwest suburbs; Glenview, Northbrook, Morton Grove, Golf, Skokie, Wilmette, Kenilworth, Winnetka and Glencoe to the north; Franklin Park, Schiller Park, River Grove, Melrose Park, Hillside, Berkeley, Broadview and Westchester to the near west; and Tinley Park and Lemont to the south. Barrington and Buffalo Grove are partly in Lake County, Bartlett in DuPage and Kane, Hanover Park in DuPage, Lemont in DuPage and Will, and Tinley Park in Will; the county line changes the permit office, not the scheduling.
Only some City of Chicago ZIP codes are on the list. Chicago addresses are confirmed case by case, as are Cicero, Berwyn, Matteson and Richton Park. The full ZIP-code list is on the GSHA service area page; if your ZIP is missing, call (224) 220-3660.
Peerless boiler guidance for Cook County homes
One-pipe steam. Cook County has the largest share of pre-war housing we serve, and some of those bungalows, foursquares and two-flats in the near-west suburbs and the older parts of Park Ridge, Skokie, Wilmette and Winnetka still heat with steam. Steam needs a steam boiler, sized from the square feet of radiation actually in the house. PB Heat’s Series 63 is rated from 233 to 746 square feet of steam radiation and runs on natural gas or LP; the Series 63-x, rated from 258 to 646 square feet, is natural gas only and comes with a probe low-water cutoff and an automatic vent damper. GSHA counts every radiator, checks the main vents and rebuilds the near-boiler piping to PB Heat’s instructions, which is what keeps a steam system quiet and the water line steady.
Hot-water radiators and the cast-iron choice. Many Cook County radiator systems were converted from gravity hot water to pumped hot water decades ago, and the boiler is now on its second or third replacement. The Peerless Series MI-e, the boiler GSHA installed in Hickory Hills with new copper supply and return piping, a circulator, an expansion tank and a new chimney vent connector, is the like-for-like choice for those systems: natural-draft cast iron, 84.3 to 84.6% AFUE, seven sizes from 70,000 to 280,000 BTU/h input, with the Hydrostat IC control. Our installed-from prices for the MI-e are published on the Peerless prices page.
Condensing on large North Shore radiator systems. Peoples Gas and North Shore Gas note on their 2026 application that a condensing boiler reaches its rated efficiency only if the return water is cold enough to condense. Large radiators in a house that has since been insulated can often do that, which makes the North Shore a good fit for the Peerless PUREFIRE: stainless steel, fully modulating, 95.0 to 95.1% AFUE on the residential sizes, with outdoor reset capability, domestic hot water priority and the ability to cascade boilers for big homes. Both utilities require active outdoor-air reset on their hot-water boiler measure, so GSHA programs it on every condensing installation.
Two-flats and small buildings. More than half of Cook County’s housing units are in buildings with two or more units, and many two-flats share one boiler. The boiler is sized for the whole building’s heat loss, and on a shared system zoning and an indirect tank for each unit or for the building are common upgrades. Larger buildings may call for semi-commercial equipment such as the Peerless Series GM, which GSHA quotes individually after a site visit.
Northwest suburbs. In Arlington Heights, Palatine, Mount Prospect, Schaumburg and Hoffman Estates, hydronic homes from the 1950s to 1970s usually have baseboard and a cast-iron boiler sharing a chimney with the water heater. A cast-iron MI-e or MI-x keeps that layout; a PUREFIRE, Series PBC combi or direct-vent PSCII moves the boiler off the chimney, after which the water heater’s draft is checked, or the water heater is replaced by a Peerless Partner indirect tank so the boiler makes the hot water.
Permits, utilities and installation considerations
Boiler permits
Nearly every Cook County address is inside a municipality that issues its own permits; the Cook County Department of Building and Zoning covers only unincorporated areas and cannot process permits for Chicago or incorporated suburbs (e-Permits). GSHA applies for the permit, supplies the equipment sheets and meets the inspector.
- Arlington Heights lists both “Boiler Replacement” and “Water Heater Replacement” as over-the-counter permits, applied for through the Civic Access portal.
- Palatine requires a permit for “replacing or installing an air conditioning, heating unit or water heater” (when a permit is required). When we add an indirect tank, its 2026 Water Heater Replacement handout applies: an Express permit filed online, a plumber registered with the Village and a letter of intent, a full-port shut-off on the cold side, dielectric unions between dissimilar metals, rigid Type L copper and a relief valve discharge ending within 6 inches of the floor.
- Des Plaines takes applications through its Customer Self Service portal (Building and Permits), and Park Ridge schedules inspections with a one-to-two-working-day wait (Permits and Inspections); we confirm each city’s boiler submittal when we file.
- City of Chicago (confirm your address first): the Department of Buildings does not require a permit for repairing or replacing a boiler in kind, or an element of its heating system such as a radiator, in a residential building up to four stories (Department of Buildings). Whether a particular swap counts as in kind, for example a steam boiler for a steam boiler versus cast iron to condensing, is something GSHA confirms with the Department before work starts.
- Unincorporated Cook County permits through the County’s Department of Building and Zoning.
Chimneys and venting in older buildings
A cast-iron MI-e, MI-x or Series 63 vents into the chimney, and many Cook County chimneys are old, unlined masonry. We inspect the flue and include a correctly sized liner when it is needed. When a boiler moves to sidewall venting (PUREFIRE, PBC, PSCII) and the water heater stays on the chimney, the water heater is left venting alone; Peoples Gas and North Shore Gas already require a chimney liner when a high-efficiency furnace orphans a water heater, and GSHA applies the same check when a boiler does. Sidewall terminations are planned against windows, doors, gangways and neighboring buildings, which on narrow city-style lots can decide the venting route. Condensate from a condensing boiler goes through a neutralizer.
Utilities and rebates
The rebate depends on the utility on your bill. Nicor Gas serves most Cook suburbs on GSHA’s list, Peoples Gas serves Chicago, and North Shore Gas serves the communities from Winnetka north; along the north shore GSHA confirms the gas utility from the bill. ComEd is the electric utility everywhere except Winnetka, which has its own municipal electric department. For 2026:
- Peoples Gas and North Shore Gas share one HVAC and Water Heating application: hot-water boilers need active outdoor-air reset; an indirect water heater paired with a condensing, modulating boiler is a separate measure (a PUREFIRE with a Peerless Partner tank is that pairing); and the two-in-one tier requires a 95% AFUE combination boiler that replaces both an existing gas boiler and an existing gas storage water heater (the Series PBC is rated 95.1 to 95.3% AFUE). Applications are due within 30 days of installation or by December 31, 2026, with the AHRI certificate.
- Nicor Gas lists boilers at 95% AFUE and up and a combination-boiler measure requiring 95% AFUE, sealed combustion, modulation and a programmed outdoor reset control. Install in 2026 and claim within 90 days or by January 31, 2027.
Steam boilers and Peerless cast-iron hot-water boilers are rated in the low-to-mid 80s AFUE, below those boiler thresholds. Check current eligibility with your gas utility, and ask GSHA which programs your equipment qualifies for.
What GSHA handles
Removal of the old boiler, radiator count and heat-loss calculation, near-boiler piping (rebuilt for steam), system flushing, circulator and zone controls on hot-water systems, chimney connector and liner or sidewall venting and neutralizer, gas piping and a new gas valve, the electrical connection by our own licensed electricians, the permit and inspection, start-up with a combustion analysis and Peerless warranty registration. Financing is described on GSHA’s financing page.
Recent GSHA work in Cook County
GSHA crews installed the Peerless Series MI-e shown above in Hickory Hills in December 2024, and have recently worked in Arlington Heights, Palatine, Des Plaines, Mount Prospect, Glenview, Wheeling, Schaumburg and Hoffman Estates, and in Barrington and Bartlett on the county’s edges. Jobs at Chicago addresses and in suburbs outside the ZIP list are confirmed case by case.
Peerless products we install in Cook County
The same Peerless lineup is available county-wide. Ratings, a comparison table and the boiler-selection guide are on the main Peerless dealer page.
Series 63 / 63-x steam
Cast-iron steam boilers for one-pipe and two-pipe systems.
Featured: 63-03L to 63-06; 63-x-03 to 63-x-06
Explore steam boilers
Series MI-e cast iron
Chimney-vented hot-water boiler, 84.3 to 84.6% AFUE.
Featured: MI-e-03 to MI-e-09
See MI-e sizes and pricesPUREFIRE condensing
95% AFUE, outdoor reset, cascade capable for large homes.
Featured: PF-50 to PF-210
Explore PUREFIREPartner indirect tanks
Stainless steel, 30 to 119 gallons, heated by the boiler.
Featured: PP and PV series
Explore indirect tanksSeries PBC combi
Heat and on-demand hot water in one 95% AFUE unit.
Featured: PBC-34, PBC-40, PBC-52
Explore the combiSeries PSCII direct vent
Cast iron without a chimney; 85.0 to 86.0% AFUE.
Featured: PSC II-03 to PSC II-06
Explore PSCIISeries MI-x cast iron
Natural-draft hot-water boiler, 84% AFUE.
Featured: MI-x-03 to MI-x-09
Compare cast-iron models
Repair and maintenance
Annual cleaning and repairs for Peerless boilers of any age.
Including the discontinued Series MI
Boiler repair and maintenanceCurrent Peerless offers
Ask GSHA about current Peerless offers.
Manufacturer offers, when available, name their own models and dates; tell us when you plan to install and we will say whether one applies. Financing through Synchrony and Service Finance is on our financing page.
Utility rebates run separately; check current eligibility with Nicor Gas, Peoples Gas or North Shore Gas.
Questions and answers
Do you install Peerless boilers in Chicago?
Case by case. Only some City of Chicago ZIP codes are on GSHA’s published service-area list, and our crews have worked at Chicago addresses; call (224) 220-3660 to confirm yours.
How do I know if I have steam or hot water?
Steam radiators usually have one pipe and a vent valve on the side, and the boiler has a sight glass showing a water line and a pressure control. Hot-water radiators usually have two pipes and a bleed valve at the top, and the boiler has a circulator pump and an expansion tank. We confirm it at the estimate; the answer decides between a Series 63 or 63-x steam boiler and a hot-water boiler.
Does Chicago require a permit to replace my boiler?
The Department of Buildings does not require a permit for replacing a boiler in kind in a residential building up to four stories. Whether your replacement counts as in kind depends on the equipment, so GSHA confirms with the Department before work starts.
Is a boiler replacement an over-the-counter permit in Arlington Heights?
Yes. Arlington Heights lists boiler replacement and water heater replacement among its over-the-counter permits through the Civic Access portal.
Which Peerless boilers qualify for Peoples Gas or North Shore Gas rebates?
Their 2026 application lists hot-water boilers with active outdoor-air reset, an indirect water heater paired with a condensing, modulating boiler, and a two-in-one tier for a 95% AFUE combi that replaces both an existing gas boiler and gas storage water heater. The PUREFIRE with a Partner tank and the Series PBC fit those descriptions. File within 30 days of installation and check current eligibility with your utility.
Can one boiler heat both units of my two-flat?
Yes, if it is sized for the whole building’s heat loss, which is how most two-flats were built. Zoning lets each unit have its own thermostat. We calculate the load and quote the boiler and zoning together.
My chimney is old and unlined. What are my options?
A correctly sized liner lets a cast-iron MI-e, MI-x or Series 63 use the chimney safely. Or a PUREFIRE, PBC or PSCII vents through the wall instead, after which we check any water heater still on the chimney.
Do you service Peerless boilers installed by others?
Yes. GSHA cleans and repairs Peerless boilers from any installer, including the discontinued Series MI. Call (224) 220-3660.
More Peerless pages
Peerless Authorized Dealer in Illinois (main page) · Peerless boilers: prices and installation cost · Peerless Series MI-e · Peerless Series GM · Boiler installation · Boiler repair and maintenance
Other counties
Request a free Peerless installation estimate
Tell us about your home and the boiler you have now in Cook County. We will follow up to schedule a free, no-obligation in-home visit, count the radiators, calculate the heat loss, check the chimney or venting, gas and electrical, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA comfort advisor checks the existing boiler and system and explains the Peerless options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Peerless dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Peerless boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Cook County (05000US17031) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17031 (accessed 2026-10-23, via GSHA Navien Cook County page)
- Share of Cook County housing units in multi-unit buildings, as cited on the GSHA Lennox Cook County page — https://gshaservices.com/lennox/cook-county-il/ (accessed 2026-10-23)
- PB Heat – Series 63 — https://www.peerlessboilers.com/products/series-63/ (accessed 2026-10-23)
- PB Heat – Series 63-x — https://www.peerlessboilers.com/products/series-63-x/ (accessed 2026-10-23)
- PB Heat – Series MI-e — https://www.peerlessboilers.com/products/series-mi-e/ (accessed 2026-10-23)
- PB Heat – Series MI-x — https://www.peerlessboilers.com/products/series-mi-x/ (accessed 2026-10-23)
- PB Heat – Peerless PUREFIRE Residential — https://www.peerlessboilers.com/products/peerless-purefire/ (accessed 2026-10-23)
- PB Heat – PUREFIRE Residential cut sheet — https://www.peerlessboilers.com/wp-content/uploads/2023/04/CUT_PureFireRes_web0825.pdf (accessed 2026-10-23)
- PB Heat – Series PBC combi boiler — https://www.peerlessboilers.com/products/peerless-combi/ (accessed 2026-10-23)
- PB Heat – Series PSCII — https://www.peerlessboilers.com/products/series-pscii/ (accessed 2026-10-23)
- PB Heat – Peerless Partner indirect-fired water heaters — https://www.peerlessboilers.com/products/peerless-partner-indirect-fired-water-heater/ (accessed 2026-10-23)
- GSHA Peerless boilers prices page (Hickory Hills MI-e installation) — https://gshaservices.com/hvac-services-illinois-wisconsin/boiler-installation/peerless-boilers-prices/ (accessed 2026-10-23)
- Village of Arlington Heights – Over the Counter Permits — https://www.vah.com/over_the_counter_permits/index.php (accessed 2026-10-23, via GSHA Navien Cook County page)
- Village of Palatine – When a Building Permit is Required — https://www.palatine.il.us/621/When-a-Building-Permit-is-Required (accessed 2026-10-23)
- Village of Palatine – 2026 Water Heater Replacement handout — https://www.palatine.il.us/DocumentCenter/View/721/Water-Heater-Replacement-PDF (accessed 2026-10-23)
- Village of Palatine – Express Building Permits — https://www.palatine.il.us/609/Express-Building-Permits (accessed 2026-10-23)
- City of Des Plaines – Building and Permits — https://www.desplainesil.gov/Departments/Community-and-Economic-Development/Building-and-Permits (accessed 2026-09-16)
- City of Park Ridge – Permits and Inspections — https://www.parkridge.us/your_government/city_departments/permits_and_inspections_2.php (accessed 2026-10-23)
- City of Chicago Department of Buildings – mechanical work not requiring a permit — https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/help/faq/DOB/bldg-permit-not-required/worktype/mechanical.html (accessed 2026-10-23)
- Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-09-16)
- Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (accessed 2026-09-16)
- Peoples Gas HVAC and Water Heating Application 2026 — https://www.peoplesgasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23)
- Peoples Gas residential rebates — https://www.peoplesgasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
- North Shore Gas residential rebates — https://www.northshoregasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
- Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
