Authorized Micro-Air dealer · Lake County, IL

Micro-Air EasyStart & EasySurge Dealer Serving Lake County, IL

Lake County homeowners are served from GSHA’s Lake Bluff office at 11 N Skokie Hwy, inside the county. GSHA Services, LTD is an authorized Micro-Air dealer and installer, and our own licensed electricians fit the EasyStart Flex soft starter and the EasySurge Guardian surge protector to central air conditioners and heat pumps from Antioch and Zion down to Deerfield and Lake Zurich.

The Lake County homes that ask us about soft starters tend to have one thing in common: more air conditioning than the generator was planned for. Many North Shore houses have two central air conditioners plus a finished basement with sump and ejector pumps, and putting all of that on one standby generator is a sizing problem where the compressors’ starting surge is a big part of the math. With a median home built in 1983 (U.S. Census Bureau, ACS 2020-2024), many of those compressors are single-stage or two-stage units that the EasyStart Flex is designed for. Call (224) 220-3660 or request a free in-home visit.

Request a free installation estimateCall (224) 220-3660

Diagram: one standby generator feeding a panel with load management to two air conditioners, each fitted with an EasyStart Flex soft starter and protected by an EasySurge Guardian at its disconnectStandbygeneratorTransfer switch+ load mgmtDisconnect +EasySurgeDisconnect +EasySurgeAC 1 +EasyStartAC 2 +EasyStart
A two-air-conditioner home on one generator, a common Lake County setup. Diagram by GSHA Services.

Communities we serve in Lake County

Our published service area includes Antioch, Deerfield, Grayslake, Gurnee, Highland Park, Ingleside, Lake Bluff, Lake Forest, Lake Villa, Lake Zurich, Libertyville, Lincolnshire, Mundelein, Round Lake, Vernon Hills, Wadsworth, Wauconda, Waukegan and Zion. Barrington and Buffalo Grove are also on the list and extend into Cook County, while Fox Lake and Island Lake extend into McHenry County. Ingleside is unincorporated, so its electrical permits run through Lake County rather than a village hall.

Our crews have also worked in North Chicago, which is on the published list, and in Winthrop Harbor, Beach Park, Kildeer, Deer Park, Long Grove and Hawthorn Woods, which are not named on it, although several share listed ZIP codes; if you live in one of them, please confirm your address when you call. The full ZIP-code list is on the service area page.

Why a soft starter makes sense in Lake County

Two air conditioners, one generator

Our KOHLER page for Lake County describes the typical load here: many North Shore homes with two air conditioners, a finished basement with a sump and ejector pump, and sometimes a detached garage or pool equipment. That profile usually leads to a large air-cooled standby generator with load management, which staggers the two air conditioners so they do not start at the same moment, and our installers confirm the plan by measuring the compressors’ locked-rotor current at the estimate.

A soft starter attacks the same problem from the other side. Instead of keeping the second compressor off until there is room, the EasyStart Flex reduces how much current each compressor draws when it starts, which Micro-Air rates at up to 75%. Depending on the house, that can let a generator carry the cooling with fewer interruptions, avoid moving up a generator size when an air conditioner is added later, or work alongside load management for the largest homes. We size with your nameplates and your panel, and we tell you which approach, or combination, makes sense.

Older homes and older equipment

About 83 percent of Lake County’s occupied homes heat with utility gas and about 15 percent with electricity (ACS 2020-2024), and with a 1983 median build year many houses are on their second or third central air conditioner. Micro-Air lists the EasyStart Flex for single-phase residential compressors up to 6 tons, including two-stage compressors and heat pump units, with TXV, EEV or fixed metering. Variable-speed systems are not on that list and already start gently, so we check the model number first.

Heat pumps in electrically heated homes

For the electrically heated homes in the county, a heat pump is often the replacement path, and its compressor runs in winter as well as summer. A soft starter on a heat pump helps in both seasons, and a surge protector guards the outdoor unit year-round. Equipment options and local HVAC permit details are on our Lennox page for Lake County.

Protecting the outdoor unit

The EasySurge Guardian mounts beside the AC disconnect and protects the 240-volt circuit to the outdoor unit. It suppresses surges with a 50 kA single-strike rating and disconnects the unit when voltage goes outside limits you set (125 to 280 volts on the high side, 80 to 230 on the low side), reconnecting after a delay of 5 to 600 seconds. On a two-system house, each outdoor unit gets its own.

Permits and electrical rules in Lake County

In Lake County, electrical and HVAC work is permitted by the municipality your address sits in, or by the county if you are unincorporated. When Micro-Air equipment goes in with a new air conditioner, heat pump or generator, it rides on that project’s permit; for an add-on to an existing system, we confirm the requirement with the local department and pull a permit where one is required. What the local pages say:

  • Unincorporated Lake County (including Ingleside). Lake County Planning, Building and Development requires a building permit for installing or altering any equipment regulated by the building, electrical or mechanical code (Building Permits). A like-for-like air conditioner swap can sometimes be filed as a registration instead of a permit, subject to conditions the county lists. Applications go through the county’s online Permit ePortal; 847-377-2600.
  • Village of Lake Bluff. The Building Division requires permits for all projects that alter or improve a property and requires every contractor working in the village to hold a Village contractor’s license (Building Permit Process). The village enforces the 2017 National Electrical Code among its adopted codes.
  • Village of Libertyville. Its Residential Permits page asks for a plat of survey showing the air conditioner location, the HVAC contract and the unit specification sheet for an AC permit, and the online permit page accepts mechanical and electrical service upgrade applications by email.
  • Village of Mundelein. A central air conditioner needs a permit with a plat showing the compressor location and the unit cut sheets, and the village’s Homeowner Project Guide adds that the electrical disconnect must be within sight of the compressor and not behind it unless 36 inches of clearance is left. That rule matters for an EasySurge Guardian, which mounts next to the disconnect; we keep the layout within it (Building & Construction Permits).
  • Village of Grayslake. The Building Department says almost all building or property changes need a permit and names HVAC as an example (Building FAQs).

Other villages, such as Gurnee, Highland Park, Lake Forest and Waukegan, have their own building departments; we confirm the process for your address before work starts.

What our electricians check at each outdoor unit

On every Lake County job a GSHA electrician confirms the breaker size against the outdoor unit’s nameplate, checks the disconnect, conduit and grounding, and plans the EasySurge Guardian’s position beside the disconnect with its two half-inch conduit connections, keeping the disconnect visible and reachable. Our HVAC technicians check the compressor, capacitor and contactor, because a soft starter is not a repair for a failing part. On a two-system house, we check both.

Electric utility and outages in Lake County

ComEd delivers electricity across all of Lake County, and the county has no municipal electric utility; none of the Illinois public power utilities on the American Public Power Association’s list is in Lake County. When the power is out, check status or report a problem on ComEd’s outage map.

Gas service splits between North Shore Gas in the eastern and central county and Nicor Gas in the west and northwest, with some communities on both lists. That matters for a natural gas standby generator, whose meter capacity is checked with the gas utility, but not for the Micro-Air devices themselves, which are purely electrical.

Pairing Micro-Air with a generator in Lake County

Our Lake Bluff office installs home standby generators throughout the county. The county generator pages cover sizing, narrow side yards and the usual adders on larger North Shore homes: see KOHLER generator installation in Lake County, Generac in Lake County, Briggs & Stratton in Lake County and Champion in Lake County.

  • Adding a second air conditioner to an existing generator. A soft starter on the new compressor, or on both, can keep the starting demand within what the generator was sized for. We compare it with adding load management.
  • Specifying a new generator for a two-system home. We include soft starters in the sizing comparison when they change the answer, and explain what each generator size would carry with and without them.
  • A portable generator with a transfer switch or interlock. Central air on a portable generator is often impossible without a soft starter, and sometimes impossible with one. Micro-Air’s sizing guide assumes no other significant loads are running when the compressor starts, so we check the generator’s rated output and your other loads before recommending it.

Our general generator installation page explains the process from estimate to start-up.

Micro-Air products we install in Lake County

The same two Micro-Air products are available county-wide. Full specifications are on the main Micro-Air page, and a shorter overview is on our EasyStart and EasySurge Guardian page.

EasyStart Flex

Soft starter for home air conditioners and heat pumps up to 6 tons; up to 75% less start-up current, per Micro-Air.

ASY-398-X1S-BL

EasyStart details

EasySurge Guardian

Surge and over/under-voltage protection for 240-volt HVAC equipment, mounted beside the AC disconnect.

ASY-720-X01

EasySurge details

Generators

Standby generator installation across Lake County from our Lake Bluff office.

KOHLER, Generac, Briggs & Stratton, Champion

Generators in Lake County

AC & heat pumps

New central air and heat pump systems, with the Micro-Air add-ons quoted at the same visit.

Lennox, Carrier and other brands

AC and heat pumps in Lake County

Micro-Air offers

Ask GSHA about current Micro-Air offers.

Financing through our lending partners is described on the financing page.

Lake County questions and answers

Which GSHA office handles Lake County?

Our Lake Bluff office at 11 N Skokie Hwy. It dispatches the electricians, HVAC technicians and generator crews who work in the county.

My generator struggles when both air conditioners run. Will soft starters fix that?

If the trouble happens when a compressor starts, soft starters often help, because Micro-Air rates the EasyStart Flex at up to 75% less start-up current. If the generator is overloaded while both units are simply running, a soft starter will not change that; load management or a larger generator would. We look at the generator’s alarm history and your loads to tell which problem you have.

Do soft starters replace load management?

Not always. Load management staggers large loads; a soft starter lowers each compressor’s starting surge. Many two-system homes need only one of them, and some of the largest benefit from both. We decide with your actual numbers.

Is there anything special about mounting the surge protector in Mundelein?

Mundelein’s project guide requires the AC disconnect to be within sight of the compressor and not behind it unless 36 inches of clearance is left. The EasySurge Guardian mounts next to the disconnect, so we place both to keep that rule.

Is any part of Lake County on a municipal electric utility?

No. ComEd delivers electricity across the whole county.

Can you add it to an air conditioner another company installed?

Yes. We install Micro-Air equipment on existing systems of any brand after checking the compressor, capacitor, contactor and circuit.

Other counties we serve

Back to the main Micro-Air page, or choose another county.

Request a free Micro-Air installation estimate

Tell us about your air conditioners or heat pump in Lake County, your generator if you have one, and what you want to solve. We will follow up to schedule a free, no-obligation in-home visit, check the equipment and electrical circuits, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA technician reads the nameplates, checks the circuits and explains which Micro-Air products, if any, fit your goal.

Written quote

You receive an itemized quote with the equipment, any permit and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Micro-Air dealer and installer. GSHA Services is an independent company and is not Micro-Air, LLC; product warranties are provided by the manufacturer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Micro-Air, EasyStart Flex Home AC Soft Starter product page — https://www.microair.net/products/easystart-flex-home-ac-soft-starter (accessed 2026-10-23)
  2. Micro-Air Knowledge Bank, Sizing a Generator — https://www.micro-air.com/kb-easystart/article_presales/easystart_Selecting_a_Generator.htm (accessed 2026-10-23)
  3. Micro-Air, EasySurge Guardian HVAC Surge Protector product page — https://www.microair.net/products/easysurge-guardian-hvac-surge-protector (accessed 2026-10-23)
  4. Census Reporter, ACS 2020-2024 5-year tables B25035 and B25040, Lake County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040,B25003&geo_ids=05000US17097 (accessed 2026-09-16)
  5. GSHA Services, KOHLER Generator Installation in Lake County (typical North Shore loads, load management, locked-rotor measurement) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/kohler-generators-installation-lake-county/ (accessed 2026-10-23)
  6. Lake County, Building Permits — https://www.lakecountyil.gov/740/Building-Permits (accessed 2026-09-16)
  7. Lake County, Registrations Instead of a Permit — https://www.lakecountyil.gov/762/Registrations-Instead-of-a-Permit (accessed 2026-09-16)
  8. Village of Lake Bluff, Building Permit Process — https://www.lakebluff.org/departments-services/community-development/50-building-permit-process (accessed 2026-09-16)
  9. Village of Lake Bluff, Adopted Building Codes — https://www.lakebluff.org/departments-services/community-development/1003-adopted-building-codes (accessed 2026-09-16)
  10. Village of Libertyville, Residential Permits — https://www.libertyville.com/departments/community_development/building/general_permit/residential_permit.php (accessed 2026-09-16)
  11. Village of Libertyville, Online Permit Application — https://www.libertyville.com/departments/community_development/building/online_permit_application.php (accessed 2026-09-16)
  12. Village of Mundelein, Homeowner Project Guide (disconnect within sight of compressor) — https://www.mundelein.org/DocumentCenter/View/4301/Project-Information-Packet—050426-PDF (accessed 2026-09-16)
  13. Village of Mundelein, Building & Construction Permits — https://www.mundelein.org/405/Building-Construction-Permits (accessed 2026-09-16)
  14. Village of Grayslake, Building FAQs — https://www.villageofgrayslake.com/669/Frequently-Asked-Questions-FAQs (accessed 2026-09-16)
  15. ComEd service territory, ICC filing Part 285.305(a)(3) — https://icc.illinois.gov/downloads/public/edocket/272285.PDF (accessed 2026-09-16)
  16. American Public Power Association, Public Power in Illinois — https://www.publicpower.org/public-power-illinois (accessed 2026-10-23)
  17. ComEd outage map — https://www.comed.com/outages/experiencing-an-outage/outage-map (accessed 2026-10-23)
  18. GSHA Services service-area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)