Authorized Peerless dealer · Will County, IL

Authorized Peerless Boiler Dealer Serving Will County, IL

GSHA Services, LTD is an authorized Peerless dealer and installer serving Will County homeowners from Joliet and Plainfield to New Lenox, Bolingbrook and Romeoville. We have no office in Will County: estimators, installation crews and our own licensed electricians are dispatched from our Woodstock and Lake Bluff offices. On a Peerless job we calculate the heat loss, install the boiler and any indirect water heater, handle the gas piping, venting, controls and electrical work, pull the municipal permit, start the boiler up and register it with PB Heat. We service other boiler brands too, so a Peerless recommendation is about fit, not the only thing we sell.

Will County has the newest housing we serve, and that shapes the boiler work here. The median home was built in 1992, only about 37 percent predate 1980 and about 7 percent predate 1940 (Census Bureau ACS 2020-2024), and 87.9 percent of occupied homes heat with utility gas. Most Will County houses have ductwork, so boiler work here centers on two kinds of homes: older houses in Joliet, Lockport and Lemont, and newer homes built with in-floor radiant heat.

Request a free installation estimateCall (224) 220-3660

Combustion analyzer printout recorded during a GSHA Services boiler start-up and safety inspection
A combustion analysis recorded during a GSHA boiler start-up and safety inspection.

Communities we serve in Will County

GSHA’s published service-area ZIP list includes Joliet, the county seat, whose city limits also reach into Kendall County; New Lenox, Crest Hill and Romeoville; Plainfield, partly in Kendall County; Bolingbrook, shared with DuPage County; and Channahon, which extends into Grundy County. Four more listed communities sit mostly outside Will County but include Will County neighborhoods: Naperville, Aurora, Lemont and Tinley Park. In a cross-county town the building department depends on which side of the line your house sits on, and GSHA sorts that out during the estimate.

Crete is not on the published ZIP list, although our crews have recently worked there; if you live in Crete or elsewhere in southern Will County, please confirm your address at (224) 220-3660 before scheduling. The complete ZIP-code list is on the GSHA service area page.

Peerless boiler guidance for Will County homes

Radiant floors in newer homes. In-floor radiant heat runs at low water temperatures, which is exactly where a condensing boiler does its best work. A Peerless PUREFIRE (PF-50 through PF-210 for residential loads) is rated 95.0 to 95.1% AFUE, with a stainless steel heat exchanger and a fully modulating burner that can turn down to a fraction of its maximum input; the PF-110, for example, fires from 27,500 to 110,000 BTU/h. That range matters on a radiant slab, which needs a small, steady amount of heat for most of the winter. The PUREFIRE control offers outdoor reset and domestic hot water priority, and it can cascade with other PUREFIRE boilers on a very large house. Where the radiant system was built with a mixing valve because the original boiler ran hot, we review whether the new boiler can supply the floor directly.

Hot water from the boiler. Many Will County radiant homes have three or more bathrooms. The usual pairing is a PUREFIRE with a Peerless Partner indirect water heater, a stainless steel tank from 30 to 119 gallons heated through the boiler’s domestic hot water priority; PB Heat rates the PP series first-hour delivery from 169 to 423 gallons at 140°F depending on the tank. A smaller household can use a Peerless Series PBC combi instead (95.1 to 95.3% AFUE, with up to 5.2 GPM of on-demand hot water at a 70°F rise on the PBC-52), which saves wall and floor space in a utility room.

Older Joliet, Lockport and Lemont houses. About 7 percent of Will County homes predate 1940, mostly in the older parts of Joliet, Lockport and Lemont, and some of those still heat with radiators. A hot-water radiator system with a sound chimney suits a cast-iron Peerless Series MI-e (84.3 to 84.6% AFUE, Hydrostat IC control with boiler reset and a low-water cutoff) or MI-x (84% AFUE); a steam system needs a Series 63 or 63-x steam boiler; and where the chimney is unusable, the direct-vent cast-iron Series PSCII (85.0 to 86.0% AFUE) vents through the wall.

Garages and additions. A hydronic home sometimes adds a heated garage slab or an addition on its own zone. A modulating PUREFIRE handles an added low-temperature zone more gracefully than an older fixed-fire boiler, and GSHA adds the zone pump or valve and the controls as part of the job.

Sizing a newer house correctly. A 1990s or 2000s house loses much less heat per square foot than a pre-war one, and many original boilers in newer homes were sized generously. GSHA calculates the heat loss room by room against the winter design temperature and sizes the Peerless boiler from its net rating, which usually means a smaller boiler that runs longer and steadier.

Permits, utilities and installation considerations

In Will County the contractor pulls the permit and the municipality inspects the work; GSHA handles the application, specification sheets, contractor registration and inspections. Here is what the municipalities we checked publish for heating equipment and water heaters.

  • Village of New Lenox. The Miscellaneous Permits Guide lists furnaces, water heaters, air conditioning units and garage heating units among projects that require a permit, asks for the manufacturer’s specifications and says any venting modification must be submitted with the application; the specifications must be on site for the final inspection, and an emergency installation still requires the application to be filed the next business day. Contractors must register with the village. We confirm the boiler submittal with the Building Department when we file.
  • City of Lockport. The building permit FAQ describes an Over the Counter Permit that includes HVAC and water heaters, reviewed quickly without plans or plats; contractors register with the Building Department first (Building Services).
  • City of Joliet. The contractor, not the homeowner, must pull the permit, and Joliet requires contractor registration, a certificate of insurance and a per-project letter of intent; permits are not issued over the counter (residential permit information).
  • Village of Plainfield. Permits go through the Permitting & Licensing Portal, and the building codes page lists the adopted plumbing, mechanical, fuel gas and electrical codes.
  • Unincorporated Will County. The Land Use Department Building Section permits through its SmartGov portal. Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment, with an emergency-repair exception if the permit is applied for the next business day, and contractors must be registered with the county.
  • Other municipalities (Bolingbrook, Romeoville, Crest Hill, Channahon, Naperville, Aurora, Lemont, Tinley Park) have their own building departments; GSHA confirms the requirement for your address before scheduling.

Venting and condensate in newer homes

A PUREFIRE vents and draws combustion air through PVC, a Series PBC accepts 2- or 3-inch PVC, CPVC, polypropylene or AL29-4C, and the PSCII is direct vent, so the termination is usually through a rim joist or an unused chase. In newer subdivisions with tight side yards, we place it to keep clearances from windows, doors, the gas meter and the neighboring house. Condensate from a condensing boiler is neutralized before it reaches a floor drain or pump. If a cast-iron boiler is staying on a chimney or B-vent, we check the vent and size any liner for the new boiler.

Utilities and rebates

Nicor Gas’s service territory names Will County communities including Aurora, Bolingbrook, Channahon, Crest Hill, Frankfort, Crete and Joliet, and New Lenox, Lockport and Plainfield name Nicor Gas on their own resident pages; a ZIP lookup on nicorgas.com is the definitive check. ComEd delivers electricity across most of the county, while most of Naperville, including its Will County portion, is served by the city’s own electric utility; neither affects a gas boiler rebate. Nicor Gas’s 2026 residential rebates include boilers at 95% AFUE and up and a combination-boiler measure requiring 95% AFUE, sealed combustion, modulation and a programmed outdoor reset control. The residential PUREFIRE and the Series PBC meet that efficiency level; Peerless cast-iron boilers do not. Equipment must be professionally installed during 2026 and claimed within 90 days or by January 31, 2027. Check current eligibility with Nicor Gas.

What GSHA handles

Removal of the old boiler, heat-loss calculation and radiant or radiator assessment, system flushing and treated fill water, circulators, zone controls and any mixing, air separator, expansion tank and backflow-protected fill, venting and condensate neutralizer, gas piping and a new gas valve, the electrical connection by our own licensed electricians, the permit, the inspection, outdoor reset programming, start-up with a combustion analysis and Peerless warranty registration.

Recent GSHA work in Will County

GSHA crews have recently worked in Joliet, Romeoville, Crest Hill, Channahon and Frankfort, and in Crete in the southern part of the county, where we ask homeowners to confirm coverage for their address before booking.

Peerless products we install in Will County

The same Peerless lineup is available county-wide. Ratings, a comparison table and the boiler-selection guide are on the main Peerless dealer page.

PUREFIRE condensing

Modulating, 95% AFUE; well suited to radiant floors.

Featured: PF-50 to PF-210

Explore PUREFIRE

Partner indirect tanks

Stainless steel, 30 to 119 gallons, for multi-bath homes.

Featured: PP and PV series

Explore indirect tanks

Series PBC combi

Heat and on-demand hot water in one 95% AFUE unit.

Featured: PBC-34, PBC-40, PBC-52

Explore the combi
Peerless Series MI-e cast iron gas boiler installed by GSHA Services, LTD

Series MI-e cast iron

Chimney-vented radiator boiler, 84.3 to 84.6% AFUE.

Featured: MI-e-03 to MI-e-09

See MI-e sizes and prices

Series PSCII direct vent

Cast iron without a chimney; 85.0 to 86.0% AFUE.

Featured: PSC II-03 to PSC II-06

Explore PSCII

Series 63 / 63-x steam

Cast-iron steam boilers for older radiator homes.

Featured: 63-03L to 63-06; 63-x-03 to 63-x-06

Explore steam boilers
Top view of a Peerless Series MI-e boiler showing the draft hood, chimney vent connector, circulator pump and expansion tank installed by GSHA Services

Repair and maintenance

Annual cleaning and repairs for Peerless boilers of any age.

Including the discontinued Series MI

Boiler repair and maintenance

Current Peerless offers

Ask GSHA about current Peerless offers.

Manufacturer offers, when available, name their own models and dates; tell us when you plan to install and we will say whether one applies. Financing through Synchrony and Service Finance is on our financing page.

Utility rebates run separately; check current eligibility with Nicor Gas.

Questions and answers

Do you serve my Will County address?

Yes, if you are in a listed ZIP: Joliet, New Lenox, Crest Hill, Romeoville, Plainfield, Bolingbrook or Channahon, or the Will County parts of Naperville, Aurora, Lemont and Tinley Park. Crete and other southern Will County addresses should call (224) 220-3660 to confirm first.

Which Peerless boiler is best for radiant floor heat?

Usually a condensing PUREFIRE. Radiant floors run at low water temperatures, which keeps a condensing boiler in its efficient range, and the PUREFIRE’s modulating burner can supply the small, steady load a slab needs. We confirm with a heat-loss calculation.

Can the boiler make our hot water too?

Yes. Pair a PUREFIRE with a Peerless Partner indirect tank, a stainless steel tank from 30 to 119 gallons, or choose a Series PBC combi, which makes up to 5.2 GPM of hot water on demand on the largest model.

Is a heating equipment permit required in unincorporated Will County?

Yes. Will County Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment, with an emergency-repair exception if the permit is applied for the next business day, and contractors must be registered with the county.

Does Joliet issue boiler permits over the counter?

No. Joliet requires the contractor to pull the permit with registration, a certificate of insurance and a per-project letter of intent, and permits are not issued over the counter. GSHA handles the submittal.

Does a Peerless boiler qualify for a Nicor Gas rebate?

The residential PUREFIRE and Series PBC meet the 95% AFUE level of Nicor’s 2026 boiler and combination-boiler measures (outdoor reset required for the combination measure). Peerless cast-iron boilers do not. Check current eligibility with Nicor Gas.

We have an old radiator house in Joliet. What fits?

A cast-iron MI-e or MI-x if the chimney is sound and the system is hot water; a Series 63 or 63-x if it is steam; or a direct-vent PSCII or condensing PUREFIRE if the chimney is unusable. We confirm which at the estimate.

Do you service Peerless boilers installed by others?

Yes. GSHA cleans and repairs Peerless boilers from any installer, including the discontinued Series MI. Call (224) 220-3660.

More Peerless pages

Peerless Authorized Dealer in Illinois (main page) · Peerless boilers: prices and installation cost · Peerless Series MI-e · Boiler installation · Boiler repair and maintenance

Other counties

Request a free Peerless installation estimate

Tell us about your home and the boiler you have now in Will County. We will follow up to schedule a free, no-obligation in-home visit, calculate the heat loss, check the radiant or radiator system, venting, gas and electrical, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA comfort advisor checks the existing boiler and system and explains the Peerless options that fit.

Written quote

You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Peerless dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Peerless boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Will County (05000US17197) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17197 (accessed 2026-10-23, via GSHA Navien Will County page)
  2. PB Heat – Peerless PUREFIRE Residential (input ranges, AFUE) — https://www.peerlessboilers.com/products/peerless-purefire/ (accessed 2026-10-23)
  3. PB Heat – PUREFIRE Residential cut sheet (outdoor reset, DHW priority, cascade) — https://www.peerlessboilers.com/wp-content/uploads/2023/04/CUT_PureFireRes_web0825.pdf (accessed 2026-10-23)
  4. PB Heat – Peerless Partner indirect-fired water heaters (first-hour ratings) — https://www.peerlessboilers.com/products/peerless-partner-indirect-fired-water-heater/ (accessed 2026-10-23)
  5. PB Heat – Series PBC combi boiler — https://www.peerlessboilers.com/products/peerless-combi/ (accessed 2026-10-23)
  6. PB Heat – Series MI-e — https://www.peerlessboilers.com/products/series-mi-e/ (accessed 2026-10-23)
  7. PB Heat – Series MI-x — https://www.peerlessboilers.com/products/series-mi-x/ (accessed 2026-10-23)
  8. PB Heat – Series PSCII — https://www.peerlessboilers.com/products/series-pscii/ (accessed 2026-10-23)
  9. PB Heat – Series 63 — https://www.peerlessboilers.com/products/series-63/ (accessed 2026-10-23)
  10. PB Heat – Series 63-x — https://www.peerlessboilers.com/products/series-63-x/ (accessed 2026-10-23)
  11. Village of New Lenox – Miscellaneous Permits Guide — https://www.newlenox.net/DocumentCenter/View/113 (accessed 2026-10-23, via GSHA Navien Will County page)
  12. Village of New Lenox – contractor registration FAQ — https://www.newlenox.net/m/faq?cat=16 (accessed 2026-09-16)
  13. City of Lockport – building permit FAQ — https://www.cityoflockport.net/Faq.aspx?QID=68 (accessed 2026-10-23)
  14. City of Lockport – Building Services — https://cityoflockport.net/133/Building (accessed 2026-09-16)
  15. City of Joliet – building permit forms — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-permit-forms (accessed 2026-09-16, via GSHA Lennox Will County page)
  16. City of Joliet – residential permit information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/residential-building-permit-information (accessed 2026-09-16)
  17. Village of Plainfield – Building and Code Enforcement — https://www.plainfieldil.gov/departments/building-and-code-enforcement (accessed 2026-09-16)
  18. Village of Plainfield – Building Codes — https://www.plainfieldil.gov/departments/building-and-code-enforcement/building-codes (accessed 2026-09-16)
  19. Will County Land Use Department – Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-10-23)
  20. Will County Building Ordinance Sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-09-16)
  21. Will County contractor registration — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (accessed 2026-09-16)
  22. Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
  23. Nicor Gas – Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-10-23)
  24. City of Naperville Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
  25. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
  26. GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)