Authorized Briggs & Stratton Dealer · Lake County, IL
Briggs & Stratton Generators in Lake County, IL
Lake County homeowners are served from GSHA’s Lake Bluff office at 11 N Skokie Hwy, inside the county, so an estimate in Lake Forest, Libertyville, Highland Park, Gurnee or Mundelein is a short drive for the crew that will do the work. GSHA Services, LTD is an authorized Briggs & Stratton dealer and installer: we count your loads, recommend a PowerProtect DX or PowerProtect+ DX generator, set the pad, run the gas line, wire the automatic transfer switch with our own licensed electricians, pull the village or county permit, and start and register the generator.
Two county facts drive most generator conversations here. Natural gas is nearly universal, with about 83 percent of Lake County’s occupied homes heated by utility gas, but the county is split between two gas companies, North Shore Gas and Nicor Gas, so the utility we coordinate a meter upgrade with depends on your street. And the median home was built in 1983, so many houses have finished basements with sump pumps, one or two central air conditioners and 200-amp service that is now forty years old. Both shape the generator size, the transfer switch and the gas work we quote.

Communities we serve in Lake County
GSHA’s published service area covers these Lake County communities: Antioch, Deerfield, Grayslake, Gurnee, Highland Park, Ingleside, Lake Bluff, Lake Forest, Lake Villa, Lake Zurich, Libertyville, Lincolnshire, Mundelein, Round Lake, Vernon Hills, Wadsworth, Wauconda, Waukegan and Zion. Barrington and Buffalo Grove extend into Cook County, and Fox Lake and Island Lake into McHenry County; coverage follows the ZIP code, but the county line decides which permit office and sometimes which gas utility you deal with. Ingleside is unincorporated, so its permits run through Lake County rather than a village hall.
Our crews also work in North Chicago, Highwood, Winthrop Harbor, Beach Park, Kildeer, Long Grove, Hawthorn Woods and other communities that share listed ZIP codes; if your village is not named above, please confirm coverage for your address when you call (224) 220-3660. The full ZIP-code list is on the GSHA service area page.
| Area | Gas utility we usually coordinate with | Who issues the generator permit |
|---|---|---|
| Lake Bluff, Lake Forest, Highland Park, Deerfield | North Shore Gas | Each city or village building department |
| Libertyville, Vernon Hills, Zion | North Shore Gas | Village or city building department |
| Antioch, Grayslake, Gurnee, Lake Villa, Mundelein, Waukegan | North Shore Gas or Nicor Gas, by address | Village or city building department |
| Fox Lake, Lake Zurich, Round Lake, Wauconda, Barrington | Nicor Gas | Village building department |
| Ingleside and other unincorporated areas | Nicor Gas or North Shore Gas, by address | Lake County Planning, Building and Development |
Utility assignments come from the companies’ tariff community lists as summarized on GSHA’s Lake County pages; your gas bill or Nicor’s ZIP lookup settles a specific address.
Briggs & Stratton generator guidance for Lake County homes
Basements and sump pumps first. Many Lake County houses have finished basements with a sump pump and, in many, a sewage ejector pump. Those pumps stop the moment ComEd’s power does, which is exactly when a summer storm is filling the pit. On every Lake County estimate the sump pump, the furnace blower and the refrigerator go on the list first. A PowerProtect DX 13kW, rated 13 kW on propane and 11.5 kW on natural gas with 37 kVA of motor-starting capability, covers those essentials plus lights and outlets in a compact upright cabinet.
Two air conditioners on the North Shore. Many homes in Lake Forest, Lake Bluff, Highland Park and Deerfield have two central air conditioners, and some add a pool pump, a detached garage or an EV charger. Rather than oversize, we usually pair a 22kW or 26kW Briggs & Stratton model with Symphony Choice power management. Briggs & Stratton’s Low Voltage Dual Module controls two thermostat-controlled appliances such as two AC units, so the generator never has to start both compressors at once, and the 50 Amp Module can manage a range, oven or electric heat. The PowerProtect DX 26kW publishes 65.5 kVA of motor-starting capability, the highest in the family, and every PowerProtect+ model is engineered, Briggs & Stratton says, to start a 5-ton air conditioner.
Natural gas output matters here. With about 83 percent of homes on utility gas and only about 1 percent on propane, nearly every Lake County generator we install runs on natural gas. That favors the PowerProtect+ DX 18kW and the two 22kW models, which produce their full rating on natural gas; the 26kW models produce 24 kW on natural gas against 26 kW on propane. For the roughly 15 percent of homes heated by electricity, the generator has to carry electric heat as well, which pushes the sizing up or calls for a 50 Amp Module on the heating load.
Narrow side yards. Older lots in Highland Park, Lake Bluff and Lake Forest can leave little room between the house and the lot line. The DX 13kW’s upright cabinet is 28.5 by 25.5 inches, and Briggs & Stratton says its footprint is 39% smaller than other leading generators; the 18 to 26kW models measure about 46 by 27 inches. All DX models are approved for installation as close as 18 inches to a building when the installation follows NFPA 37 and the home has working carbon monoxide detectors. Where the PowerProtect+ models fit, their front-facing exhaust blows away from the house, which can make a side-yard spot near windows workable.
Service age. With a median build year of 1983, a lot of Lake County panels and meter sockets are original. Briggs & Stratton’s 200-amp switch is the common whole-house choice, the 150-amp switch fits upgraded panels, and the dual 200/400-amp switch suits large North Shore homes with split distribution. Our electricians look at the meter, the main panel and the grounding before we recommend one, and tell you at the estimate if the service itself needs attention.
Permits, utilities and installation considerations
Permits and inspections
A standby generator and its transfer switch are permitted and inspected by the municipality your address sits in, or by the county if you are unincorporated. GSHA prepares the application, the plat of survey markup and the equipment cut sheets, and schedules the inspections. What the local pages we checked say:
- Unincorporated Lake County. Lake County Planning, Building and Development (500 W Winchester Rd, Unit 101, Libertyville; 847-377-2600; online Permit ePortal) requires a building permit for installing or altering any equipment regulated by the building, electrical or mechanical code (Building Permits). A generator, its gas piping and its transfer switch are all regulated equipment, so they are permitted work; the county’s registration-instead-of-permit route is written for like-for-like air conditioner swaps, not for adding a generator.
- Village of Lake Bluff. The Building Division (847-283-6885) requires building permits for all projects that alter or improve a property and requires every contractor working in the village to hold a Village contractor’s license (Building Permit Process). The village enforces the 2017 National Electrical Code and the 2018 International Fuel Gas Code among its adopted codes, which are the two codes a generator installation is inspected against.
- Village of Libertyville. The Building Division (325 N Milwaukee Ave, Suite 203; 847-918-2020) reviews plans, issues permits and inspects, and its online permit page accepts electrical applications by email.
- Village of Grayslake. The Building Department says almost all building or property changes need a permit (Building FAQs). In the Prairie Crossing subdivision the village issues the permit but Lake County performs plan review and inspections, and the village’s construction handout limits work to 7:00 a.m. to 7:00 p.m. on weekdays and 8:30 a.m. to 5:00 p.m. on Saturdays.
- Village of Mundelein. The Building Department (300 Plaza Circle; 847-949-3283; BS&A online portal) takes permits online and needs 48 hours’ notice for inspections (Building & Construction Permits).
Sound and the weekly test
Mundelein’s noise chapter 9.08 caps residential sound at the lot line at 55 dBA at night (10:00 p.m. to 7:00 a.m.) and 60 dBA by day; its exemption names HVAC systems, not generators, so we confirm with the village how it treats a generator’s exercise run and set the weekly test for a daytime hour. Briggs & Stratton publishes normal operating sound of 65 dB(A) for the DX 26kW up to 69 dB(A) for the DX 13kW, and its Eco-Cise weekly test lasts 16 seconds. Libertyville’s Zoning Code Sec. 26-12-2 applies octave-band sound limits measured inside the receiving residence. We place the generator away from a neighbor’s bedroom windows wherever the lot allows.
Gas: North Shore Gas or Nicor Gas
Lake County has two natural-gas utilities. North Shore Gas serves the eastern and central county; its ICC tariff lists Deerfield, Highland Park, Lake Bluff, Lake Forest, Libertyville, Vernon Hills and Zion, among others. Nicor Gas serves the western and northwestern county, including Barrington, Fox Lake, Ingleside, Lake Zurich, Round Lake and Wauconda. Antioch, Grayslake, Gurnee, Lake Villa, Mundelein and Waukegan appear on both lists. Briggs & Stratton publishes fuel use at half load of 176,000 to 206,000 BTU/hr on natural gas for the 18 to 26kW models, and full-load demand is higher; our gas technicians add the generator’s full-load figure to the furnace, water heater and range already on the meter and, when the meter cannot carry the total, coordinate the upgrade with whichever utility serves you.
Electric: ComEd, county-wide
ComEd delivers electricity across all of Lake County, and the county has no municipal electric utility. The Briggs & Stratton transfer switch senses when ComEd’s power is interrupted, starts the generator and moves your circuits over, and it isolates your house from ComEd’s lines so no power is fed back toward utility crews.
Where the generator can sit
Placement starts with Briggs & Stratton’s 18-inch approval, NFPA 37 and working CO detectors, then the village’s zoning. Lake County villages commonly restrict equipment in front and corner side yards and may require screening; where a village publishes no generator-specific rule we confirm placement with the building department at permit time rather than assume.
Briggs & Stratton products we install in Lake County
The same lineup is available county-wide. Full specifications are on the main Briggs & Stratton page.

PowerProtect DX 13kW
Sump pump, furnace, refrigerator and lights in the smallest footprint; suits a tight side yard.
Explore the DX 13kW
PowerProtect+ DX 18kW
Full 18 kW on natural gas, front-facing exhaust and built-in EnergyTrak monitoring.
Explore the 18kW
22kW DX and PowerProtect+ DX
Whole-house coverage on natural gas for most homes with one central air conditioner.
Explore the 22kW models
26kW DX and PowerProtect+ DX
Large homes with two air conditioners, usually paired with a Symphony Choice Dual Module.
Explore the 26kW modelsAutomatic Transfer Switches
150, 200 and dual 200/400 amp switches for Lake County’s larger services; 100 amp for older homes.
About transfer switchesSymphony Choice
Low Voltage Dual Module for two AC systems; 50 Amp Module for ranges and electric heat.
About Symphony ChoiceEnergyTrak Monitoring
Know the generator started while you are away; built into PowerProtect+ models.
About EnergyTrakService & Repair
Maintenance and repair from our Lake Bluff office for current and older Briggs & Stratton units.
Explore repairCurrent Briggs & Stratton offers
Ask GSHA about current Briggs & Stratton offers.
Each Briggs & Stratton offer names its own models and purchase window, so we confirm at the estimate which one, if any, applies to your generator and purchase date. Financing through Synchrony and Service Finance is on our financing page.
Questions and answers
Which GSHA office serves Lake County?
Our Lake Bluff office at 11 N Skokie Hwy, inside the county. Communities in the northwest corner near Fox Lake and Island Lake are also close to our Woodstock headquarters, and we dispatch from whichever office is nearer.
Can one Briggs & Stratton generator run two air conditioners?
Often, yes. A 22kW or 26kW model with Briggs & Stratton’s Symphony Choice Low Voltage Dual Module manages two thermostat-controlled systems so they do not start together. We confirm by checking both compressors’ starting requirements at the estimate.
Which gas company will you coordinate with?
North Shore Gas in the eastern and central county, Nicor Gas in the western and northwestern county, and either one in Antioch, Grayslake, Gurnee, Lake Villa, Mundelein and Waukegan depending on the address. We confirm from your bill, check the meter against the generator’s demand and arrange any meter upgrade with that utility.
Do I need a permit in unincorporated Lake County?
Yes. Lake County Planning, Building and Development requires a building permit for installing or altering any equipment regulated by the building, electrical or mechanical code, which covers the generator, gas piping and transfer switch. GSHA applies through the county’s ePortal; in a village, the village issues the permit.
Does Lake Bluff require a contractor license?
Yes. Lake Bluff requires every contractor working in the village to hold a Village contractor’s license before the permit is issued. Ask us to confirm our current village license when we quote your job.
Will the weekly test bother my neighbors?
Briggs & Stratton’s Eco-Cise weekly test runs for 16 seconds, which Briggs & Stratton says reduces noise and fuel use. We schedule it for a daytime hour and, in villages with lot-line sound limits such as Mundelein, confirm with the village how the rule applies.
Do you repair Briggs & Stratton generators you did not install?
Yes, including older Fortress-series units. See our repair page or the Briggs & Stratton fault code guide.
Are there Briggs & Stratton offers for Lake County homeowners?
Ask GSHA about current Briggs & Stratton offers. We confirm what applies to your generator and purchase date at the estimate.
More Briggs & Stratton pages
Briggs & Stratton Authorized Dealer in Illinois (main page) · PowerProtect DX generators · Briggs & Stratton repair · Generator error codes · Generator installation
Other counties
Request a free Briggs & Stratton installation estimate
Tell us about your home and the generator you are considering in Lake County. We will follow up to schedule a free, no-obligation in-home visit, count the loads you want covered, check the electrical service, gas meter and placement, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA advisor checks the panel, gas meter and lot and explains the Briggs & Stratton options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing, water treatment and generator contractor and an authorized Briggs & Stratton dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Briggs & Stratton generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Briggs & Stratton residential standby generator lineup and DX / PowerProtect+ DX product pages — https://energy.briggsandstratton.com/en-us/products/residential-standby-generators (accessed 2026-10-23)
- PowerProtect DX 26kW product page (65.5 kVA, 18-inch clearance, NFPA 37) — https://energy.briggsandstratton.com/en-us/products/powerprotect-dx-26kw-standby-generator (accessed 2026-10-23)
- PowerProtect DX 13kW product page (footprint, sound) — https://energy.briggsandstratton.com/en-us/products/powerprotect-dx-13kw-home-standby-generator (accessed 2026-10-23)
- Briggs & Stratton Symphony Choice power management — https://energy.briggsandstratton.com/en-us/residential/products/standby-generators/power-management (accessed 2026-10-23)
- Briggs & Stratton transfer switches — https://energy.briggsandstratton.com/en-us/residential/products/standby-generators/transfer-switches-and-accessories (accessed 2026-10-23)
- GSHA KOHLER Generator Installation in Lake County (GSHA county notes: basements, two ACs, narrow lots) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/kohler-generators-installation-lake-county/ (accessed 2026-10-23)
- GSHA Lennox Dealer in Lake County (GSHA-verified permit, utility and Census facts) — https://gshaservices.com/lennox/lake-county-il/ (accessed 2026-10-23)
- Census Reporter, ACS 2020-2024 tables B25035, B25040, B25003, Lake County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040,B25003&geo_ids=05000US17097 (verified by GSHA 2026-09-16)
- North Shore Gas Ill. C.C. No. 17 tariff, municipalities served — https://icc.illinois.gov/downloads/public/tariff/currentbooks/21/Gas%20Service%20Schedule%20Ill.%20C.%20C.%20No.%2017[569]..pdf (verified by GSHA 2026-09-16)
- North Shore Gas service area — https://www.northshoregasdelivery.com/company/area (verified by GSHA 2026-09-16)
- Nicor Gas, Where We Are (Lake County list) — https://www.nicorgas.com/company/where-we-are.html (verified by GSHA 2026-09-16)
- Nicor Gas service area ZIP lookup — https://www.nicorgas.com/company/where-we-are/our-service-area.html (verified by GSHA 2026-09-16)
- ComEd service territory, ICC filing — https://icc.illinois.gov/downloads/public/edocket/272285.PDF (verified by GSHA 2026-09-16)
- American Public Power Association, Public Power in Illinois — https://www.publicpower.org/public-power-illinois (verified by GSHA 2026-09-16)
- Lake County Building Permits — https://www.lakecountyil.gov/740/Building-Permits (verified by GSHA 2026-09-16)
- Lake County Registrations Instead of a Permit — https://www.lakecountyil.gov/762/Registrations-Instead-of-a-Permit (verified by GSHA 2026-09-16)
- Village of Lake Bluff Building Permit Process — https://www.lakebluff.org/departments-services/community-development/50-building-permit-process (verified by GSHA 2026-09-16)
- Village of Lake Bluff Adopted Building Codes — https://www.lakebluff.org/departments-services/community-development/1003-adopted-building-codes (verified by GSHA 2026-09-16)
- Village of Libertyville Online Permit Application — https://www.libertyville.com/departments/community_development/building/online_permit_application.php (verified by GSHA 2026-09-16)
- Libertyville Zoning Code Sec. 26-12-2 Noise — https://library.municode.com/il/libertyville/codes/code_of_ordinances?nodeId=LIILMUCO_CH26ZO_ART12PEST_S26-12-2NO (verified by GSHA 2026-09-16)
- Village of Grayslake Building FAQs — https://www.villageofgrayslake.com/669/Frequently-Asked-Questions-FAQs (verified by GSHA 2026-09-16)
- Village of Grayslake BDH-1 construction handout — https://villageofgrayslake.com/DocumentCenter/View/10574/BDH-1-General-Construction-Information-Handout (verified by GSHA 2026-09-16)
- Village of Mundelein Building & Construction Permits — https://www.mundelein.org/405/Building-Construction-Permits (verified by GSHA 2026-09-16)
- Mundelein Municipal Code Chapter 9.08 Noise — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT9OFEAMOSA_CH9.08NO_9.08.020NOPR (verified by GSHA 2026-09-16)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
