Authorized Micro-Air dealer · Will County, IL
Micro-Air EasyStart & EasySurge Dealer Serving Will County, IL
GSHA Services, LTD is an authorized Micro-Air dealer and installer serving Will County homeowners from Joliet and Plainfield to New Lenox, Bolingbrook and Romeoville. We have no office in Will County: our estimators, installers and licensed electricians come from our Woodstock and Lake Bluff offices. We install the Micro-Air EasyStart Flex soft starter and the EasySurge Guardian surge protector on central air conditioners and heat pumps, and the generators those devices are often paired with.
Will County’s homes are the newest in our service area: the median home was built in 1992, 87.9 percent of occupied homes heat with natural gas, and 82.8 percent are owner-occupied (U.S. Census Bureau, ACS 2020-2024). Many houses from the 1990s and 2000s have conventional single-stage or two-stage central air that is now due for attention, while some newer systems are variable-speed. Which Micro-Air product makes sense depends on which you have, so we start with the model number. Call (224) 220-3660 or request a free in-home visit.
Communities we serve in Will County
Our published service-area ZIP list includes Joliet, the county seat, whose limits also reach into Kendall County; New Lenox, Crest Hill and Romeoville; Plainfield, partly in Kendall County; Bolingbrook, shared with DuPage; and Channahon, which extends into Grundy County. Naperville, Aurora, Lemont and Tinley Park are also listed and include Will County neighborhoods, though most of each lies in another county. In a cross-county town, the building department and, in Naperville, the electric utility depend on which side of the line your house is on.
Lockport and Frankfort are also on the published list, but Crete is not, although our crews have recently worked there; if you live there or elsewhere in southern Will County, please confirm your address before scheduling. The complete list is on the service area page.
Why Micro-Air equipment makes sense in Will County
1990s and 2000s air conditioners
A 1992 median build year means many Will County houses are on their first or second replacement air conditioner, and most of those are conventional single-stage or two-stage units. Micro-Air lists the EasyStart Flex for single-phase residential compressors up to 6 tons, including two-stage compressors and heat pumps, with TXV, EEV or fixed metering, and rates it at up to a 75% reduction in start-up current. Newer variable-speed systems are not on that list and already start gently, so if you have one, the soft starter is not the tool and we will say so.
Generators for growing households
Owner-occupied homes with finished basements and sump pumps are a common reason for a standby generator here, and central air is usually the largest single load on it. Micro-Air’s sizing guide assumes the generator’s starting watts are about 1.4 times running watts and that no other significant loads are running when the compressor starts. A soft starter lowers the starting demand; it does not lower the running load, so we add up everything you want on the generator before recommending one.
Heat pumps in propane and electric homes
About 9.3 percent of Will County homes heat with electricity and 2.0 percent with bottled or LP gas (ACS 2020-2024). In those homes, and in gas homes that add a heat pump for dual-fuel heating, the compressor runs in winter too, so a soft starter helps in both seasons. Equipment options and Will County HVAC permit details are on our Lennox page for Will County.
Surge and voltage protection
The EasySurge Guardian works on single-stage, two-stage and variable-speed systems alike, because Micro-Air designed it for any 240-volt HVAC equipment. It mounts outdoors next to the AC disconnect, suppresses surges with a 50 kA single-strike rating, disconnects the outdoor unit when voltage goes outside adjustable limits (125 to 280 volts high, 80 to 230 low) and alerts your phone if its protection fails. Newer systems with electronic controls are a good fit for it.
Permits and electrical rules in Will County
In Will County the contractor generally pulls the permit and the municipality inspects. When Micro-Air equipment goes in with a new air conditioner, heat pump or generator, it is covered by that project’s permit; for an add-on to an existing system, we confirm with the local department and pull a permit when required. What the offices we checked publish about the air conditioner’s electrical connection:
- Village of New Lenox. The Miscellaneous Permits Guide requires a permit for air conditioning units, liquid-tight flexible metallic conduit outdoors, a breaker no larger than the condenser label allows, and a final inspection; contractors must register with the village. Those are exactly the details our electricians check before adding a Micro-Air device.
- City of Lockport. The building permit FAQ requires permits for mechanical-system replacements and makes the property owner responsible for seeing that one is obtained, and the HVAC Replacement application calls for wiring by a licensed electrician (Building Services).
- City of Joliet. The building code page covers mechanical and electrical changes and requires contractor registration and a Joliet-accepted HVAC contractor license, and the contractor, not the homeowner, must pull the permit.
- Village of Plainfield. Permits go through the Permitting & Licensing Portal, and the building codes page lists the electrical code the village enforces. Zoning Sec. 9-14 keeps air conditioning equipment in rear and side yards at least four feet from property lines; the EasySurge Guardian mounts on the house wall at the disconnect and does not change the unit’s placement.
- Unincorporated Will County. Building Ordinance Sec. 150.003 requires a permit in advance for electrical installations and heating equipment, and every contractor must be registered with the county; permits go through the Land Use Department Building Section.
Bolingbrook, Romeoville, Crest Hill, Channahon and the cross-county towns have their own building departments; we confirm the requirement for your address before scheduling.
What our electricians check at the outdoor unit
Following the same points New Lenox spells out, a GSHA electrician confirms the breaker is no larger than the outdoor unit’s label allows, checks the disconnect, the outdoor conduit and the grounding, and plans the EasySurge Guardian’s position beside the disconnect with its two half-inch conduit connections. The EasyStart Flex is wired between the supply and the compressor and taught the compressor through its app. Our HVAC technicians check the compressor, capacitor and contactor first, since a soft starter does not fix a failing part.
Electric utilities and outages in Will County
ComEd delivers electricity in New Lenox, Lockport, Plainfield, Joliet and the rest of our Will County service area, except the Will County part of Naperville, which is served by the city’s municipally owned electric utility. The Naperville Department of Public Utilities appears on the American Public Power Association’s list of Illinois public power utilities; Naperville Electric customers report outages to the city, and ComEd customers can check ComEd’s outage map.
The Micro-Air equipment works the same on either supply. We do not quote outage statistics; the question that matters is what you want running during an outage and whether your generator can start it.
Pairing Micro-Air with a generator in Will County
We install home standby generators across our Will County service area. The county generator pages cover Nicor Gas meters, permits and placement: see KOHLER generator installation in Will County, Generac in Will County, Briggs & Stratton in Will County and Champion in Will County.
- Choosing a standby generator size. Planning a soft starter alongside the generator can change which size makes sense for a home with central air. We show you what each size would carry with and without it.
- Adding central air coverage to an existing generator. If the generator was sized for essentials, a soft starter may let it start the air conditioner too, as long as the running load fits.
- Portable generator. It must connect through a transfer switch or interlock installed by our electricians. We tell you plainly whether central air is realistic on it.
Our generator installation page covers the full process.
Micro-Air products we install in Will County
The same two Micro-Air products are available county-wide. Full specifications are on the main Micro-Air page, and a shorter overview is on our EasyStart and EasySurge Guardian page.
EasyStart Flex
Soft starter for home air conditioners and heat pumps up to 6 tons; up to 75% less start-up current, per Micro-Air.
ASY-398-X1S-BL
EasyStart detailsEasySurge Guardian
Surge and over/under-voltage protection for 240-volt HVAC equipment, mounted beside the AC disconnect.
ASY-720-X01
EasySurge detailsGenerators
Standby generator installation across our Will County service area.
KOHLER, Generac, Briggs & Stratton, Champion
Generators in Will CountyAC & heat pumps
New central air and heat pump systems, with the Micro-Air add-ons quoted at the same visit.
Lennox, Carrier and other brands
AC and heat pumps in Will CountyMicro-Air offers
Ask GSHA about current Micro-Air offers.
Financing through our lending partners is described on the financing page.
Will County questions and answers
Which GSHA office serves Will County?
Crews come from our Woodstock and Lake Bluff offices. We have no office in Will County.
My air conditioner is variable-speed. Do I need a soft starter?
Usually not. Variable-speed systems already ramp their compressors electronically and are not on Micro-Air’s EasyStart compatibility list. The EasySurge Guardian still applies, since Micro-Air designed it for any 240-volt HVAC equipment.
What does New Lenox require at the outdoor unit?
New Lenox’s permit guide calls for liquid-tight flexible metallic conduit outdoors, a breaker no larger than the condenser label allows and a final inspection, and contractors must register with the village. We install Micro-Air equipment to the same standard.
Do I live in a ComEd or Naperville Electric area?
If your address is in the City of Naperville, including its Will County portion, you are most likely a Naperville Electric customer; elsewhere in our Will County area it is ComEd. Your bill settles it. The Micro-Air equipment works the same either way.
Will an EasyStart let my generator run my air conditioner?
Often, when the starting surge is the problem and the generator has enough running capacity. Micro-Air rates the EasyStart Flex at up to 75% less start-up current. We compare your generator’s rated output with the compressor and your other loads before recommending it.
Do you work in Frankfort and Crete?
Our crews have recently worked in both. Frankfort is on our published ZIP list, but Crete is not, so please confirm a Crete address before scheduling.
Other counties we serve
Back to the main Micro-Air page, or choose another county.
Request a free Micro-Air installation estimate
Tell us about your air conditioner or heat pump in Will County, your generator if you have one, and what you want to solve. We will follow up to schedule a free, no-obligation in-home visit, check the equipment and electrical circuit, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA technician reads the nameplates, checks the circuit and explains which Micro-Air products, if any, fit your goal.
Written quote
You receive an itemized quote with the equipment, any permit and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Micro-Air dealer and installer. GSHA Services is an independent company and is not Micro-Air, LLC; product warranties are provided by the manufacturer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Micro-Air, EasyStart Flex Home AC Soft Starter product page — https://www.microair.net/products/easystart-flex-home-ac-soft-starter (accessed 2026-10-23)
- Micro-Air Knowledge Bank, Sizing a Generator — https://www.micro-air.com/kb-easystart/article_presales/easystart_Selecting_a_Generator.htm (accessed 2026-10-23)
- Micro-Air, EasySurge Guardian HVAC Surge Protector product page — https://www.microair.net/products/easysurge-guardian-hvac-surge-protector (accessed 2026-10-23)
- Census Reporter, ACS 2020-2024 5-year tables B25003, B25035 and B25040, Will County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040,B25003&geo_ids=05000US17197 (accessed 2026-09-16)
- Village of New Lenox, Miscellaneous Permits Guide — https://www.newlenox.net/DocumentCenter/View/113 (accessed 2026-09-16)
- Village of New Lenox, contractor registration FAQ — https://www.newlenox.net/m/faq?cat=16 (accessed 2026-09-16)
- City of Lockport, building permit FAQ — https://www.cityoflockport.net/Faq.aspx?QID=68 (accessed 2026-09-16)
- City of Lockport, HVAC Replacement application — https://www.cityoflockport.net/DocumentCenter/View/7049 (accessed 2026-09-16)
- City of Lockport, Building Services — https://cityoflockport.net/133/Building (accessed 2026-09-16)
- City of Joliet, building code information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-code-information (accessed 2026-09-16)
- City of Joliet, building permit forms — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-permit-forms (accessed 2026-09-16)
- Village of Plainfield, Building and Code Enforcement — https://www.plainfieldil.gov/departments/building-and-code-enforcement (accessed 2026-09-16)
- Village of Plainfield, Building Codes — https://www.plainfieldil.gov/departments/building-and-code-enforcement/building-codes (accessed 2026-09-16)
- Village of Plainfield, Zoning Sec. 9-14 — https://library.municode.com/il/plainfield/codes/code_of_ordinances?nodeId=COOR_CH9ZOOR_ARTIIGEPR_S9-14PEOBREYA (accessed 2026-09-16)
- Will County Building Ordinance Sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-09-16)
- Will County, contractor registration — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (accessed 2026-09-16)
- Will County Land Use Department, Building Section — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-09-16)
- City of Naperville, Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
- American Public Power Association, Public Power in Illinois — https://www.publicpower.org/public-power-illinois (accessed 2026-10-23)
- ComEd outage map — https://www.comed.com/outages/experiencing-an-outage/outage-map (accessed 2026-10-23)
- GSHA Services service-area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
