Champion home standby power. Local GSHA crews.

Your Authorized Champion Dealer in Northern Illinois

GSHA Services, LTD is an authorized Champion Power Equipment dealer and installer with offices in Woodstock and Lake Bluff. Our own crews and our own licensed electricians install, start up and service Champion home standby generators and their automatic transfer switches for homeowners in McHenry, Lake, Boone, Kane, DuPage, Cook and Will counties.

A Champion standby generator sits on a pad outside the house, runs on natural gas or propane, and starts by itself when the utility power drops. Getting that right means sizing the generator to what you actually need running, picking the right transfer switch, checking the gas meter and the electrical service, and pulling the permits. Every Champion project with GSHA starts with a free in-home estimate. Request a free installation estimate or call (224) 220-3660.

Request a free installation estimateCall (224) 220-3660

Champion 22kW fleX home standby generator in its outdoor enclosure
Champion 22 kW fleX home standby generator (product image).

Authorized Champion DealerGSHA Services, LTD · Woodstock & Lake Bluff, IL

An authorized Champion dealer and installer with its own crews

What we do with Champion equipment

GSHA sells, installs and services Champion home standby generators and the Champion transfer switches and load-management modules that go with them. We handle the whole job: the site visit and load count, the pad, the gas piping from the meter, the transfer switch and wiring, the permit and inspections, start-up and the homeowner walkthrough. The people who do that work are GSHA employees, and the electrical work, from the service-entrance transfer switch to the load-management modules, is done by GSHA’s own licensed electricians.

Why the installer matters for a Champion warranty

Champion’s home standby warranty is tied to how the unit is activated and serviced. Champion’s support center says its 10-year/2,000-hour limited warranty on air-cooled 8.5 kW to 20 kW models runs from successful activation, that the unit must be registered, that scheduled maintenance from the owner’s manual is required, and that warranty work must be handled by an authorized or certified Champion home standby service dealer. Years one and two carry limited coverage on parts, labor and mileage; years three through ten cover parts only. Champion’s 22 kW product pages list a 10-year limited warranty on the generator and a 2-year limited warranty on the transfer switch. GSHA registers the system and keeps the maintenance records that the warranty asks for.

One company for the whole house

GSHA is also a heating, cooling, plumbing, water heater, water treatment and indoor air quality contractor, so the furnace, sump pump, well pump and air conditioner that a generator has to carry are equipment our technicians already work on every day. We install and service other generator brands too, which means the recommendation you get is based on your house and your must-run list, not on a single catalog. Questions before you book? Call (224) 220-3660 or email info@gshaservices.com.

Current Champion offers

Ask GSHA about current Champion offers.

We do not publish manufacturer promotions on this page unless we have confirmed them on Champion’s own site and listed them on our promotions page. When you request an estimate, tell us your planned installation date and we will tell you whether any Champion offer applies to the model and switch you are quoted.

Financing for a standby generator is available through GSHA’s lending partners, Synchrony and Service Finance, subject to credit approval. Current programs and how to apply are on our financing page.

Explore Champion home standby generators

Four Champion standby families cover most of the homes we see, from a handful of essential circuits to a whole house with central air. Outputs are Champion’s published ratings; each generator makes slightly more power on propane than on natural gas. Sound levels are Champion’s figures measured at 23 feet. Installed prices shown are GSHA’s published starting packages; every installation is quoted after a free in-home estimate.

Champion 22kW fleX home standby generator

22 kW fleX whole house

Champion’s largest home standby: 22,000 W on propane and 19,800 W on natural gas from a 999 cc V-twin, with a whole-house, service-entrance-rated automatic transfer switch in 100 A, 150 A or 200 A.

Models: 201010 (100 A), 201356 (150 A), 201016 (200 A)

Key specs
  • Output: 22,000 W LP / 19,800 W NG; Champion lists a 5-ton AC rating
  • Sound: 67 dB(A) at 23 ft
  • Controls: fleX controller with OLED display, Power Line Carrier communication over the home’s existing wiring, fleX Wi-Fi Direct for installer setup
  • Load management: fleX Load Management Module 201019, sold separately
  • Size: 59.4 x 31.5 x 45.9 in., 697 lb, aluminum enclosure
  • Cold start: 24 V starting system rated to -22 F
  • Warranty: 10-year limited (generator), 2-year limited (switch)
  • Fully installed from $9,000

Champion also offers a 22 kW model with aXis technology (201219) using aXis load management modules. Final pricing depends on placement, gas run, electrical service and permits.

Explore the Champion 22 kW fleX
Champion 14kW aXis home standby generator

14 kW aXis whole house

A compact whole-house option: 14,000 W on propane and 12,500 W on natural gas, paired with a service-entrance aXis automatic transfer switch that can manage high-demand appliances.

Switch options: 100 A, 150 A (100836), 200 A (100837)

Key specs
  • Output: 14,000 W LP / 12,500 W NG; Champion lists a 5-ton AC rating
  • Sound: 62 dB(A) at 23 ft
  • Engine: 754 cc Champion V-twin
  • Load management: aXis Load Management Modules 100868, sold separately
  • Size: 49 x 28 x 28 in., 439 lb
  • Cold start: rated to -22 F with no warming kit
  • Warranty: 10-year limited (generator), 2-year limited (switch)
  • Request installed pricing
Explore the Champion 14 kW aXis
Champion 12.5kW home standby generator

12.5 kW select circuit

Backs up a chosen set of circuits: 12,500 W on propane and 11,000 W on natural gas, with a 100 A outdoor select-circuit switch that holds up to 16 circuits.

Model: 100179

Key specs
  • Output: 12,500 W LP / 11,000 W NG
  • Sound: 63 dB(A) (Champion figure)
  • Engine: 717 cc Champion V-twin
  • Switch: 100 A select circuit, 12-space sub-panel (up to 16 circuits with tandem breakers), NEMA 3R
  • Size: 49 x 28 x 28 in., 425.5 lb
  • Fuel at full load: 2.6 gal/h LP, 198.1 cu ft/h NG
  • Request installed pricing
Explore the Champion 12.5 kW
Champion 8.5kW home standby generator

8.5 kW select circuit

The smallest Champion standby: 8,500 W on propane and 7,500 W on natural gas, with a 50 A outdoor select-circuit switch for up to 12 essential circuits.

Model: 100177

Key specs
  • Output: 8,500 W LP / 7,500 W NG
  • Sound: 59.5 dB(A) at 23 ft
  • Engine: 439 cc Champion OHV
  • Switch: 50 A select circuit, 8-space sub-panel (up to 12 circuits with tandem breakers), NEMA 3R
  • Size: 49 x 28 x 28 in., 374.9 lb
  • Fuel at full load: 1.5 gal/h LP, 139.8 cu ft/h NG
  • Fully installed from $6,000
Explore the Champion 8.5 kW

Transfer switches

The switch decides how much of the house the generator carries. Champion pairs its select-circuit units with outdoor sub-panel switches and its whole-house units with service-entrance-rated switches in NEMA 3R enclosures.

Select circuit: 50 A, 100 A · Whole house: 100 A, 150 A, 200 A

How to choose a switch

Load management

Modules that let a whole-house generator shed a high-demand load, such as an air conditioner, when it needs the capacity, so a right-sized generator can still cover the whole house.

fleX module 201019 · aXis module 100868 (sold separately)

How we wire them

Service and maintenance

Scheduled maintenance is a condition of Champion’s warranty. GSHA services Champion standby generators we installed and ones we did not.

Tune-ups · repairs · warranty service

Book a generator tune-up

Portable and inverter

Champion also makes portable and inverter generators. They are a secondary category for us; our focus is permanently installed standby power.

Ask us if you already own one

Read the Q&A

Choose a system

Most Champion systems GSHA installs fall into one of three setups. Which one fits depends on how much of the house has to keep running, what your electrical service looks like, and whether you are on natural gas or propane.

Select circuit: the essentials only

The Champion 8.5 kW and 12.5 kW units come with an outdoor select-circuit transfer switch, which is a small sub-panel. We move the circuits you choose into it, typically the furnace blower, refrigerator, sump pump, well pump, a few lights and outlets, and the garage door, and the generator carries only those. Champion’s 8.5 kW switch is a 50 A unit with eight spaces (up to 12 circuits using tandem breakers); the 12.5 kW switch is a 100 A unit with twelve spaces (up to 16 circuits). This is the most economical way into standby power, and it suits homes where the priority is keeping the basement dry, the pipes from freezing and the food cold rather than running central air.

Whole house with a service-entrance switch

The Champion 14 kW aXis and 22 kW fleX use a whole-house automatic transfer switch rated for service-entrance use, installed between the utility meter and your main panel. When the utility fails, the switch transfers the entire panel to the generator. That is simpler for the homeowner, because nothing has to be picked in advance, but it means the generator must be able to handle whatever starts at once. Champion lists a 5-ton air conditioner rating for both the 14 kW and the 22 kW, and we confirm the real starting load of your compressor, well pump and other motors at the estimate.

Whole house with load management

Load management lets a whole-house generator protect itself. Champion’s fleX Load Management Module (201019) works with the 22 kW fleX, and its aXis Load Management Modules (100868) work with the aXis systems; both are sold separately. A module sits on a high-demand circuit, such as an air conditioner, electric range or electric dryer, and lets the generator drop that load when it needs the capacity and bring it back when it can. On homes with two air conditioners, or a large house where a 22 kW is the right size, this is usually how we keep the whole house on backup without oversizing.

Natural gas or propane

Every Champion home standby generator on this page runs on natural gas or propane, and each one is rated a little higher on propane: the 22 kW fleX makes 22,000 W on propane and 19,800 W on natural gas, and the 8.5 kW makes 8,500 W and 7,500 W. Fuel use matters for sizing the gas line and the meter. Champion’s spec table lists full-load consumption of 139.8 cubic feet per hour of natural gas for the 8.5 kW, 198.1 for the 12.5 kW and 292.6 for the 22 kW fleX, on top of the furnace, water heater and range already on the meter. For propane homes, the same tables list 1.5, 2.6 and 3.8 gallons per hour at full load, which is what decides the tank size.

Sizing and compatibility are settled at the free estimate. GSHA counts the loads you want carried, looks at the panel and the service, checks the gas meter or propane tank, and quotes the generator, switch and any load-management modules in writing.

Why the installation matters

A standby generator is a small engine-driven power plant wired into your service and piped into your gas line. These are the steps GSHA performs on a Champion installation.

  • Load count and sizing. We list what has to run in an outage and measure what matters, such as the air conditioner, well pump and sump pump, rather than guessing from square footage. An undersized unit trips or bogs down when a compressor starts; an oversized one costs more than it needs to.
  • Gas supply check. Our gas technicians compare the generator’s full-load gas use with the meter’s capacity and everything else already on it, size the pipe run to the pad, and coordinate a meter change with the utility when one is needed. Propane homes get the same check against tank size and regulator capacity.
  • Placement and pad. Champion units ship with a composite mounting pad on the 22 kW models. We place the generator where code, the manufacturer’s clearances, the gas run and your neighbors all work, away from windows, doors and air intakes, and outside any septic field or easement.
  • Transfer switch and wiring. GSHA’s own licensed electricians install the transfer switch, move circuits into a select-circuit sub-panel or tie a service-entrance switch in between the meter and the panel, and install any load-management modules. On the 22 kW fleX, Champion’s Power Line Carrier technology lets the generator and switch communicate over the home’s existing wiring, which reduces separate control-wire runs.
  • Permits and inspections. We prepare the drawings and paperwork your village, city or county asks for, pull the electrical and gas permits, and meet the inspector.
  • Start-up and activation. We start the unit, set the exercise schedule, test an actual transfer and confirm the switch returns the house to utility power. Champion’s warranty term runs from successful activation, and we register the system with Champion.
  • Homeowner walkthrough. We show you the controller, the alarms, what the exercise cycle sounds like and when maintenance is due.

For a step-by-step look at how GSHA handles any standby generator job, see our generator installation page.

Champion service, repair and maintenance

Champion’s support center makes scheduled maintenance from the owner’s manual a requirement of its home standby warranty and says warranty work must be handled by an authorized or certified Champion home standby service dealer. GSHA services Champion generators whether or not we installed them: oil and filter changes with the synthetic oil Champion specifies, spark plugs and air filters, battery testing, a check of the transfer switch and a test run under load.

If your generator is showing an alarm or will not start, call (224) 220-3660 or see our generator repair page. Our home generator error codes guide explains common standby alarms for several other brands; it does not list Champion codes, so for a Champion fault, call us with the message shown on the controller and we will tell you what it means. Regular tune-ups are booked through our generator tune-up page.

Find your county

GSHA installs and services Champion generators from two offices: Woodstock (McHenry County) and Lake Bluff (Lake County). Crews travel from those offices into Boone, Kane, DuPage, Cook and Will counties. Each county page covers the communities we serve there, who issues generator permits, the gas and electric utilities, and how Champion’s lineup fits local homes. The ZIP-code list is the definitive coverage map.

Questions and answers

Is GSHA an authorized Champion dealer?

Yes. GSHA Services, LTD is an authorized Champion dealer and installer. We sell, install, activate and service Champion home standby generators and transfer switches with our own crews and our own licensed electricians.

What size Champion generator do I need?

It depends on what you want running, not on the size of the house alone. If you only need the essentials, such as the furnace, sump pump, refrigerator, well pump and lights, a select-circuit 8.5 kW or 12.5 kW is often enough. If you want the whole house, including central air, the 14 kW aXis or 22 kW fleX with a service-entrance switch is the usual choice, with load management on large homes. We settle it with a load count at the free estimate.

Does a Champion standby generator run on natural gas or propane?

Both. Every Champion home standby model on this page runs on either fuel and is rated slightly higher on propane. Homes on a natural gas main connect to the existing meter after we confirm it has enough capacity; rural homes without gas run from a propane tank sized to the generator’s fuel use.

Will it start in a northern Illinois winter?

Champion rates the 24 V starting systems on its 8.5, 12.5, 14 and 22 kW home standby units to start in temperatures down to -22 F, and its product pages for the smaller units say no warming kit is needed. We still recommend keeping up with scheduled maintenance, especially the battery, before winter.

How loud is a Champion generator?

Champion publishes 59.5 dB(A) at 23 feet for the 8.5 kW, 62 dB(A) at 23 feet for the 14 kW aXis and 67 dB(A) at 23 feet for the 22 kW fleX, and lists 63 dB(A) for the 12.5 kW. Champion notes the figures do not account for your installation site. We place the unit with neighbors’ windows and local noise rules in mind.

How much does a Champion generator cost installed?

GSHA’s published starting packages are fully installed from $6,000 for the Champion 8.5 kW and from $9,000 for the Champion 22 kW fleX; the 12.5 kW and 14 kW aXis are quoted on request. The final price depends on placement, the gas run, the electrical service, any load-management modules and permit fees, so every job is confirmed with a free in-home estimate.

Who handles the permit?

GSHA does. Generator permits come from your city or village, or from the county if you live in an unincorporated area, and the paperwork differs by jurisdiction. Your county page explains who issues the permit where you live.

Are there any Champion offers right now?

Ask GSHA about current Champion offers. We confirm any manufacturer promotion against Champion’s own terms and your installation date at the estimate rather than publishing amounts here. Financing through Synchrony and Service Finance is described on our financing page.

Do you service Champion generators you did not install?

Yes. GSHA repairs and maintains Champion home standby generators regardless of who installed them, and we service other brands as well. Call (224) 220-3660 to schedule.

I already own a Champion portable or inverter generator. Can you help?

Champion makes portable and inverter generators as well as home standby units, and we know many homeowners start with one. A portable generator must never be connected to house wiring without a proper transfer device. Our licensed electricians can look at your panel and tell you what a code-compliant connection would involve, or whether a standby unit makes more sense for your home.

Request a free Champion installation estimate

Tell us about your home and what you want to keep running in an outage. We will follow up to schedule a free, no-obligation in-home visit, count the loads, check the panel, the gas meter or propane tank, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA advisor counts the loads, checks the electrical service and gas supply, and explains the Champion options that fit.

Written quote

You receive an itemized quote with the generator, transfer switch, permits, start-up and warranty registration included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured electrical, heating, cooling, plumbing and generator contractor and an authorized Champion dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Champion home standby generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Champion 201010, 22 kW Whole House Home Standby Generator and 100A Switch with fleX Technology — https://www.championpowerequipment.com/product/201010-22-kw-whole-house-home-standby-generator-and-100a-switch-with-flex-technology/ (accessed 2026-10-23)
  2. Champion 201016, 22 kW with 200A Switch and fleX Technology — https://www.championpowerequipment.com/?p=205818 (accessed 2026-10-23)
  3. Champion 201356, 22 kW with 150A Switch and fleX Technology — https://www.championpowerequipment.com/product/201356-22-kw-whole-house-home-standby-generator-and-150a-switch-with-flex-technology/ (accessed 2026-10-23)
  4. Champion 201219, 22 kW with 100A Switch and aXis Technology — https://www.championpowerequipment.com/?p=176102 (accessed 2026-10-23)
  5. Champion 100837, 14 kW with 200A Switch and aXis Technology — https://championpowerequipment.com/?p=108378 (accessed 2026-10-23)
  6. Champion 100836, 14 kW with 150A Switch and aXis Technology — https://www.championpowerequipment.com/?p=108375 (accessed 2026-10-23)
  7. Champion 100179, 12.5 kW Select Circuit Home Standby Generator and 100A Switch — https://www.championpowerequipment.com/product/100179-12-5-kw-home-standby-generator-with-100-amp-outdoor-switch (accessed 2026-10-23)
  8. Champion 100177, 8.5 kW Select Circuit Home Standby Generator and 50A Switch — https://www.championpowerequipment.com/product/100177-8-5-kw-home-standby-generator-with-50-amp-outdoor-switch/ (accessed 2026-10-23)
  9. Champion Support: Home Standby Generator Warranty — https://help.championpowerequipment.com/article/e9pbt6pk36-home-standby-generator-warranty (accessed 2026-10-23)
  10. Champion Power Equipment home page (product categories: Home Standby, Generators, Inverters) — https://www.championpowerequipment.com/ (accessed 2026-10-23)
  11. GSHA Champion Generators prices and installation page (installed-from prices) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/champion-generators-prices-and-installation-cost/ (accessed 2026-10-23)
  12. GSHA promotions page (no Champion promotion listed) — https://gshaservices.com/promotions/ (accessed 2026-10-23)
  13. GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
  14. GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)