Authorized Champion dealer · Lake County, IL
Champion Generator Dealer Serving Lake County, IL
Lake County homes are served from GSHA’s Lake Bluff office at 11 N Skokie Hwy, inside the county, with our Woodstock headquarters next door in McHenry County as backup. GSHA Services, LTD is an authorized Champion dealer and installer: our crews set the generator, our gas technicians run the line from the meter, and our own licensed electricians install the Champion transfer switch, pull the permit and meet the inspector. We install other generator brands as well, and we tell you plainly which Champion system fits your house.
Two local facts shape most Champion recommendations here. Lake County is a two-gas-utility county: North Shore Gas serves much of the eastern and central county and Nicor Gas the western and northwestern part, with several villages split between them, so the meter we check and the utility we call depend on your address. And many North Shore and central-county homes carry more than one air conditioner, a finished basement with a sump and an ejector pump, and sometimes pool equipment, which pushes the choice toward a whole-house Champion with load management.

Communities we serve in Lake County
GSHA’s published service area covers Antioch, Deerfield, Grayslake, Gurnee, Highland Park, Ingleside, Lake Bluff, Lake Forest, Lake Villa, Lake Zurich, Libertyville, Lincolnshire, Mundelein, Round Lake, Vernon Hills, Wadsworth, Wauconda, Waukegan and Zion. Barrington and Buffalo Grove also appear on the list but extend into Cook County, and Fox Lake and Island Lake extend into McHenry County. Coverage follows the ZIP code, so a county line does not decide whether we come out, but it does decide which building department issues your generator permit and, in some villages, which gas utility owns the meter.
Ingleside is unincorporated, so its permits run through Lake County rather than a village hall. If you live in Winthrop Harbor, Beach Park, Kildeer, Deer Park, Long Grove, Hawthorn Woods or another community not named above, please confirm your address with us when you call (224) 220-3660. The full ZIP-code list is on the GSHA service area page.
Which Champion generator fits a Lake County home
Larger homes with two air conditioners
In Lake Forest, Highland Park, Deerfield and Libertyville we often see houses with two central air systems, a finished basement and a long list of things the owners want running. For those homes the Champion 22 kW fleX is the usual starting point: Champion rates it at 22,000 W on propane and 19,800 W on natural gas, pairs it with a whole-house service-entrance transfer switch in 100 A, 150 A or 200 A, and offers the fleX Load Management Module (201019, sold separately) that lets the generator shed one compressor when it needs the capacity and bring it back when it can. GSHA’s published package for the 22 kW fleX is fully installed from $9,000; long gas runs and multiple modules are priced at the estimate.
Mid-size homes in Mundelein, Vernon Hills, Grayslake and Gurnee
A typical three- or four-bedroom house with one central air system often fits the Champion 14 kW aXis, which Champion rates at 14,000 W on propane and 12,500 W on natural gas and lists with a 5-ton air conditioner rating. It comes with a service-entrance aXis transfer switch in 150 A or 200 A, and aXis Load Management Modules (100868) can hold back a range or dryer when the air conditioner is starting. Its 49 by 28 inch footprint is the same as Champion’s smaller select-circuit units, which helps on subdivision side yards.
Essentials-only and older homes
Lake County’s median home was built in 1983 (Census Bureau, ACS 2020-2024), and plenty of owners simply want the furnace, sump and ejector pumps, refrigerator and some lights covered. The Champion 8.5 kW (fully installed from $6,000) handles up to 12 circuits through its 50 A outdoor select-circuit switch, and the 12.5 kW handles up to 16 circuits through a 100 A switch. A select-circuit system leaves the main service alone, which can matter in an older house whose panel would need work before a service-entrance switch could go in.
Electric-heat and propane homes
About 15 percent of Lake County homes heat with electricity and about 1 percent with propane (Census Bureau, ACS 2020-2024). An electrically heated house puts a much larger winter load on a generator, so we size those homes around the heating equipment rather than the air conditioner. Propane homes in the western county can run any Champion standby model; each is rated higher on propane, and Champion’s published full-load propane use (1.5 gallons an hour for the 8.5 kW, 2.6 for the 12.5 kW, 3.8 for the 22 kW fleX) sets the tank size.
Permits, utilities and installation considerations
Permits: village or county
Your generator permit comes from the municipality your address is in, or from the county if you are unincorporated. What the local offices we checked publish:
- Unincorporated Lake County, including Ingleside. Lake County Planning, Building and Development, 500 W Winchester Rd, Unit 101, Libertyville (847-377-2600), requires a building permit to install or alter any equipment regulated by the building, electrical or mechanical code, and takes applications through its online Permit ePortal. A standby generator and transfer switch are electrical equipment, so an unincorporated install is a permit job.
- Lake Bluff. The Village’s Building Division (847-283-6885) requires permits for projects that alter or improve a property, issues them at Village Hall, and requires every contractor working in the Village to hold a Village contractor’s license. The Village enforces the 2017 National Electrical Code and the 2018 International Fuel Gas Code, among others.
- Libertyville. The Building Division (847-918-2020) reviews plans, issues permits and inspects, and its online permit page accepts electrical service upgrade applications by email, which is the route when a service-entrance transfer switch involves panel or service work.
- Grayslake. The Building Department (847-223-8515) says almost all building or property changes need a permit. Construction is limited to 7:00 a.m. to 7:00 p.m. on weekdays and 8:30 a.m. to 5:00 p.m. on Saturdays, so installation days are scheduled inside those hours. In the Prairie Crossing subdivision the Village issues the permit but Lake County performs plan review and inspections.
- Mundelein. The Building Department (847-949-3283) uses an online portal and needs 48 hours’ notice for inspections.
Placement and sound
Mundelein’s noise chapter caps residential sound at the lot line at 55 dBA at night (10 p.m. to 7 a.m.) and 60 dBA during the day. Its published exemption names HVAC systems in good repair, not generators, so in Mundelein and any village with a similar rule we confirm with the building department how generator exercise runs and outage operation are treated before choosing the spot. Champion publishes sound levels measured at 23 feet: 59.5 dB(A) for the 8.5 kW, 62 dB(A) for the 14 kW aXis and 67 dB(A) for the 22 kW fleX, and notes that the figures do not account for the installation site. Distance from the lot line, walls and landscaping all change what a neighbor hears, which is why placement is settled on site with the plat of survey in hand.
Gas: North Shore Gas or Nicor
North Shore Gas’s tariff lists Deerfield, Highland Park, Lake Bluff, Lake Forest, Libertyville, Vernon Hills and Zion among the communities it serves; Nicor serves Barrington, Fox Lake, Ingleside, Lake Zurich, Round Lake and Wauconda, among others. Antioch, Grayslake, Gurnee, Lake Villa, Mundelein and Waukegan appear on both lists, so your gas bill or meter tag settles it. About 83 percent of Lake County’s occupied homes heat with utility gas (Census Bureau, ACS 2020-2024), which means most houses already have a meter we can tie into; the question is capacity. Champion’s spec table lists full-load natural gas use of 292.6 cubic feet per hour for the 22 kW fleX and 198.1 for the 12.5 kW, on top of a furnace, water heater, range and sometimes a pool heater. When the meter cannot carry the total, we coordinate the upgrade with whichever utility serves you.
Electric: ComEd county-wide
ComEd delivers electricity across all of Lake County, and the county has no municipal electric utility. A Champion whole-house switch is installed between the ComEd meter and your main panel; a select-circuit switch is fed from a breaker in the main panel. Either way, the switch keeps the generator from back-feeding ComEd’s lines and returns the house to utility power when service comes back.
Basements, sumps and ejector pumps
Finished basements are common across the county, and many have both a sump pump and a sewage ejector. Both stop when the power does. They are the first two circuits we put on any Champion system, including the smallest select-circuit package, and on whole-house systems we make sure a load-management module is never set to shed them.
How a Lake County Champion job runs
Village rules in Lake County vary more than in most counties we serve, so the order of work matters.
- Estimate and plat review. We walk the lot with your plat of survey, mark the generator location, measure distances to lot lines, windows and doors, and note the gas utility from your meter tag. We list the circuits you want carried and look at the main panel to decide between a select-circuit and a whole-house Champion system.
- Village or county permit. We prepare the electrical and gas permit package for your village, or for Lake County Planning, Building and Development if you are unincorporated. In Lake Bluff, the Village’s contractor license requirement applies to us as the installer, and we confirm current fees and submittal lists with each department when we apply.
- Utility coordination. If the meter cannot carry the generator, we arrange an upgrade with North Shore Gas or Nicor before the install date. Whole-house jobs that need service work are coordinated with ComEd.
- Installation. The crew sets the unit and pad, runs the gas line, and our licensed electricians install the Champion switch and any load-management modules, working within village construction hours such as Grayslake’s.
- Inspection, activation and walkthrough. After the inspection, we start the generator, test a full transfer and return, set the weekly exercise time to suit you and your neighbors, register the system with Champion and show you the controller.
From there, Champion’s warranty calls for scheduled maintenance from the owner’s manual. Our Lake Bluff technicians handle annual service so the generator is ready before storm season and winter.
Champion products we install in Lake County
The same Champion lineup is available county-wide. Full specs, switch options and warranty details are on the main Champion page.

22 kW fleX whole house
22,000 W LP / 19,800 W NG with a service-entrance switch in 100, 150 or 200 A and optional fleX load management.
Fully installed from $9,000
Explore the 22 kW fleX
14 kW aXis whole house
14,000 W LP / 12,500 W NG with an aXis service-entrance switch and optional aXis load management.
Request installed pricing
Explore the 14 kW aXis
12.5 kW select circuit
12,500 W LP / 11,000 W NG with a 100 A outdoor switch for up to 16 circuits.
Request installed pricing
Explore the 12.5 kW
8.5 kW select circuit
8,500 W LP / 7,500 W NG with a 50 A outdoor switch for up to 12 essential circuits.
Fully installed from $6,000
Explore the 8.5 kWCurrent Champion offers
Ask GSHA about current Champion offers.
Tell us your planned installation date when you book and we will tell you whether a Champion promotion applies to the model you are quoted. Financing through Synchrony and Service Finance, subject to credit approval, is described on our financing page.
Lake County Champion questions
Who installs Champion generators in Lake Forest, Libertyville and Highland Park?
GSHA Services, LTD, an authorized Champion dealer and installer, from our Lake Bluff office at 11 N Skokie Hwy. Our own crews and licensed electricians do the work.
Can one Champion generator run two air conditioners?
Often, yes, with load management. The Champion 22 kW fleX works with the fleX Load Management Module, which lets the generator shed one compressor when it needs the capacity. We confirm by measuring the compressors’ starting loads at the estimate.
Is my gas from North Shore Gas or Nicor?
It depends on the address. North Shore Gas serves much of the eastern and central county and Nicor the western and northwestern part, and several villages, including Grayslake, Gurnee, Mundelein and Waukegan, have both. Your gas bill settles it, and we coordinate any meter upgrade with that utility.
Do I need a permit for a Champion generator in unincorporated Lake County?
Yes. Lake County Planning, Building and Development requires a building permit for installing equipment regulated by the electrical code, and applications go through its online ePortal. Inside a village, the village issues it. GSHA handles either.
Will my village’s noise rule be a problem?
Usually not, with good placement. Some villages, such as Mundelein, cap sound at the lot line. We check how your village treats generator exercise and outage operation, compare it with Champion’s published sound levels, and place the unit accordingly.
Are there Champion offers right now?
Ask GSHA about current Champion offers. We confirm any promotion against Champion’s terms and your installation date at the estimate.
Do you service Champion units you did not install?
Yes. Champion makes scheduled maintenance a condition of its home standby warranty, and GSHA maintains and repairs Champion generators regardless of who installed them. See our generator tune-up and generator repair pages.
More Champion pages
Authorized Champion dealer in Illinois (main page) · Champion prices and installation · Generator installation · Generator error codes guide
Other counties
Request a free Champion installation estimate
Tell us about your Lake County home and what you want to keep running in an outage. We will follow up to schedule a free, no-obligation in-home visit, count the loads, check the panel and the gas meter, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA advisor counts the loads, checks the electrical service and gas supply, and explains the Champion options that fit.
Written quote
You receive an itemized quote with the generator, transfer switch, permits, start-up and warranty registration included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured electrical, heating, cooling, plumbing and generator contractor and an authorized Champion dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Champion 201010, 22 kW with 100A Switch and fleX Technology — https://www.championpowerequipment.com/product/201010-22-kw-whole-house-home-standby-generator-and-100a-switch-with-flex-technology/ (accessed 2026-10-23)
- Champion 100837, 14 kW with 200A Switch and aXis Technology — https://championpowerequipment.com/?p=108378 (accessed 2026-10-23)
- Champion 100179, 12.5 kW Select Circuit with 100A Switch — https://www.championpowerequipment.com/product/100179-12-5-kw-home-standby-generator-with-100-amp-outdoor-switch (accessed 2026-10-23)
- Champion 100177, 8.5 kW Select Circuit with 50A Switch — https://www.championpowerequipment.com/product/100177-8-5-kw-home-standby-generator-with-50-amp-outdoor-switch/ (accessed 2026-10-23)
- Champion Support: Home Standby Generator Warranty — https://help.championpowerequipment.com/article/e9pbt6pk36-home-standby-generator-warranty (accessed 2026-10-23)
- GSHA Champion Generators prices and installation page — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/champion-generators-prices-and-installation-cost/ (accessed 2026-10-23)
- GSHA KOHLER Generator Installation in Lake County (verified county generator notes) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/kohler-generators-installation-lake-county/ (accessed 2026-10-23)
- GSHA Lennox Dealer in Lake County (verified Census, utility and permit facts with sources) — https://gshaservices.com/lennox/lake-county-il/ (accessed 2026-10-23)
- Lake County Planning, Building and Development: Building Permits — https://www.lakecountyil.gov/740/Building-Permits
- Village of Lake Bluff: Building Permit Process — https://www.lakebluff.org/departments-services/community-development/50-building-permit-process
- Village of Lake Bluff: Adopted Building Codes — https://www.lakebluff.org/departments-services/community-development/1003-adopted-building-codes
- Village of Libertyville: Online Permit Application — https://www.libertyville.com/departments/community_development/building/online_permit_application.php
- Village of Grayslake: Building FAQs — https://www.villageofgrayslake.com/669/Frequently-Asked-Questions-FAQs
- Village of Grayslake: General Construction Information Handout — https://villageofgrayslake.com/DocumentCenter/View/10574/BDH-1-General-Construction-Information-Handout
- Village of Mundelein: Building & Construction Permits — https://www.mundelein.org/405/Building-Construction-Permits
- Village of Mundelein Municipal Code 9.08 Noise — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT9OFEAMOSA_CH9.08NO_9.08.020NOPR
- Nicor Gas service area ZIP lookup — https://www.nicorgas.com/company/where-we-are/our-service-area.html
- North Shore Gas — https://www.northshoregasdelivery.com/company/about
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/
