Cummins standby power. Local GSHA crews.
Your Authorized Cummins Dealer in Northern Illinois
GSHA Services, LTD is an authorized Cummins dealer and installer with offices in Woodstock and Lake Bluff. Our own crews and our own licensed electricians install, service and maintain Cummins QuietConnect™ home standby generators and the automatic transfer switches that connect them to your house, for homeowners in McHenry, Lake, Boone, Kane, DuPage, Cook and Will counties.
Every Cummins installation from GSHA starts with a free in-home estimate: a load count of the circuits you want carried through an outage, a check of your gas meter and piping against the generator’s full-load fuel demand, a look at your electrical service and panel, and a written quote for the generator, transfer switch, pad, permit and start-up. Request a free installation estimate or call (224) 220-3660.

Authorized Cummins DealerGSHA Services, LTD · Woodstock & Lake Bluff, IL
An authorized Cummins dealer with its own crews
Sales, installation and service from one company
GSHA sells Cummins home standby generators, installs them and services them afterwards. Cummins itself tells homeowners to work with an authorized dealer for sizing, warranty details and the transfer switch that suits a particular house, and that is the work we do: we size the unit to your loads, choose the transfer switch, prepare the permit, set the pad, run the gas line, wire the switch, start the generator and register it with Cummins.
Our own licensed electricians and gas-line technicians
A standby generator is half electrical work and half gas work. The automatic transfer switch is installed between the utility meter and your panel, and the generator is a large gas appliance that has to be fed from your meter. At GSHA both trades are in-house: the electricians who wire the switch and the technicians who size and run the gas piping work for GSHA, and they are the people who meet the inspector. GSHA also installs and services other generator brands, including KOHLER, so the recommendation you get is based on your house rather than a single catalog.
Free estimates and financing
The in-home estimate is free and carries no obligation. Financing is available through Synchrony and Service Finance; current programs and the application steps are on our financing page. Questions before you book? Call (224) 220-3660 or email info@gshaservices.com.
More Cummins pages from GSHA
- Cummins generator installation and pricing
- Cummins generators: our Illinois and Wisconsin dealer page
- Cummins home standby generator fault codes
- Whole-house generator installation (all brands)
- Cummins QuietConnect™ 13 kW (RS13AE)
- Cummins QuietConnect™ 17 kW (RS17AE)
- Cummins QuietConnect™ 20 kW (RS20AE)
- Generator repair · Generator maintenance
- Service area by ZIP code
Current Cummins offers
Ask GSHA about current Cummins offers.
Manufacturer promotions carry their own equipment lists, purchase dates and eligibility rules, so we confirm what applies to your generator and installation date at the estimate rather than publishing an offer here. Financing programs available through GSHA are on our financing page. See financing options.
Generators are not part of the gas or electric utility rebate programs we track for heating and cooling equipment; if a program changes, we will tell you at the estimate rather than promise a rebate up front.
Explore Cummins products
Eight things we install and support. Each card links to the GSHA page for that product where one exists. Ratings and specifications come from Cummins’ published specification sheets; the output of an installed generator also depends on the fuel, the ambient temperature and the altitude, which Cummins notes as derating factors.

QuietConnect™ 13 kW
The smallest air-cooled QuietConnect™ model, rated 13 kW standby and 54.2 A on both natural gas and propane. A common fit for essential circuits in a small or mid-size home, confirmed by the load count at the estimate.
Models: RS13A, RS13AE (extreme cold)
Key specifications
- Rated amps — 54.2 A natural gas / 54.2 A LP, 120/240 V, 60 Hz
- Engine — Cummins QSJ999G, 999 cc air-cooled V-twin, 3600 rpm
- Fuel at full load — 217,227 BTU/hr natural gas; 197,681 BTU/hr LP vapor
- Weight — 479 lb
From the Cummins Quiet Connect Series (RS13A, RS17A, RS20A, RS20AC) specification sheet NAS-6254. Final sizing and pricing follow a free in-home estimate.

QuietConnect™ 17 kW
Rated 17 kW standby and 70.8 A on either fuel, in the same compact enclosure as the 13 kW. The middle step for homes that want more than essentials, such as a central air conditioner alongside the furnace, sump pump and kitchen.
Models: RS17A, RS17AE (extreme cold)
Key specifications
- Rated amps — 70.8 A natural gas / 70.8 A LP, 120/240 V, 60 Hz
- Engine — Cummins QSJ999G, 999 cc air-cooled V-twin
- Fuel at full load — 245,954 BTU/hr natural gas; 242,386 BTU/hr LP vapor
- Weight — 531 lb
From Cummins specification sheet NAS-6254. Final sizing and pricing follow a free in-home estimate.

QuietConnect™ 20 kW
The largest air-cooled QuietConnect™ model: 20 kW standby, rated 75 A on natural gas and 83.3 A on propane. The usual choice when the goal is to carry most or all of a larger home, with load management staging the biggest loads.
Models: RS20A, RS20AC, RS20AE, RS20ACE
Key specifications
- Rated amps — 75 A natural gas / 83.3 A LP, 120/240 V, 60 Hz
- Engine — Cummins QSJ999G, 999 cc air-cooled V-twin
- Fuel at full load — 255,947 BTU/hr natural gas; 265,783 BTU/hr LP vapor
- Weight — 531 lb (RS20A) / 596 lb (RS20AC)
From Cummins specification sheet NAS-6254. Final sizing and pricing follow a free in-home estimate.
Extreme-Cold “E” Models
Each air-cooled size comes in an extreme-cold version. Cummins says standard models perform down to 0°F out of the box and the E models down to -40°F. The 13, 17 and 20 kW units on GSHA’s product pages are the E versions.
Models: RS13AE, RS17AE, RS20AE, RS20ACE
Cold-weather details
- Operating range — 122°F (50°C) to -40°F (-40°C)
- Standard models — perform down to 0°F (-18°C) out of the box
- E models — perform down to -40°F (-40°C)
From Cummins specification sheet NAS-6254. Cummins also offers cold weather kits with component heaters for areas that routinely fall below freezing.
Liquid-Cooled QuietConnect™
For very large homes and light commercial buildings, Cummins lists liquid-cooled QuietConnect™ models from 25 to 150 kW standby on natural gas or propane. GSHA quotes these case by case after a site visit.
Models: RS25, RS30, RS36, RS40, RS50, RS60, RS80, RS100, RS125, RS150
Example: RS36 and RS40
- Engine — 2.4 L turbocharged, aftercooled in-line four-cylinder at 1800 rpm, liquid-cooled
- Sound — 63 dB(A) at 23 ft with the Sound Level 2 enclosure
- Single-phase 120/240 V — RS36 rated 150.0 A; RS40 rated 166.7 A
From Cummins RS36 (NAS-5777d) and RS40 (NAS-5778d) specification sheets. Warranty for these models differs from the air-cooled line; we give you the current terms with the quote.
Automatic Transfer Switches
The switch that disconnects your house from the utility when power fails, puts it on the generator, and switches back when the outage is over. Cummins offers multiple transfer switch options; GSHA picks the one that suits your service and panel.
Cummins residential transfer switches, including service-entrance applications
What we decide at the estimate
- Whole-house or selected-circuit transfer
- Whether the switch must be service-entrance rated for your 200 A service
- Which loads go on Cummins load management
Installed and wired by GSHA’s own licensed electricians under the permit.
Remote Monitoring & Load Management
QuietConnect™ air-cooled units have intelligent load management for up to four loads and built-in remote monitoring. The Cummins Connect Cloud app sends status alerts, runs the exercise schedule and can start or stop the generator remotely.
Cummins Connect Cloud app; optional RS in-home display
What the app does
- Real-time power alerts and status updates, including shutdown notices
- Automatic exercise scheduling through the year
- Remote start or stop during an outage
- Optional sharing of performance data with a Cummins authorized dealer
As described on cummins.com. GSHA sets up the connection at start-up.
Service, Repair & Maintenance
GSHA services and repairs Cummins home standby generators, including units we did not install: scheduled maintenance, fault diagnosis, battery and controller checks, and warranty work. Our fault-code guide explains the lamps and codes.
All Cummins home standby models
Common reasons to call
- A red ACTION REQUIRED or STANDBY OFF lamp
- The generator did not start or exercise on schedule
- Annual maintenance before winter
See the fault-code page for what is safe to check yourself.
Choose a size, a fuel and a cold-weather rating
Most Cummins installations GSHA quotes come down to four decisions. None of them depends on the town you live in as much as on what you want running when the power goes out, what fuel reaches the house, and how cold it gets where the generator sits.
Essentials, most of the house, or the whole house
Start with the list of things that must keep running. For most northern Illinois homes that list begins with the furnace blower, the sump pump, the refrigerator and freezer, lights and outlets, a well pump where there is one, and the garage door. A central air conditioner, an electric range, an electric dryer and an EV charger are the large loads that push a house from one size to the next. The 13 kW QuietConnect™ (54.2 A on either fuel) is the usual starting point for essentials; the 17 kW (70.8 A) adds room for a central air conditioner; the 20 kW (75 A on natural gas, 83.3 A on propane) is the size we look at when a family wants most or all of a larger home carried. We do not size from square footage. We size from the circuits you choose and the starting current of the motors on them, and the estimate shows the arithmetic.
Load management instead of a bigger generator
Cummins builds intelligent load management for up to four loads into the air-cooled QuietConnect™ controller. Load management lets the generator shed a large load, such as a second air conditioner or an electric water heater, when the house is drawing close to the generator’s limit, and bring it back when there is room. It is often the difference between a 17 kW and a 20 kW unit, or between a 20 kW unit and a liquid-cooled one, and we show you both options when the numbers are close.
Natural gas or propane
Every air-cooled QuietConnect™ model runs on natural gas or propane. The 13 kW and 17 kW models carry the same amperage rating on either fuel, while the 20 kW is rated 75 A on natural gas and 83.3 A on propane. Natural gas is the common choice in suburban Illinois because it is piped to the house and nothing has to be stored. Propane suits rural parcels beyond the gas mains. Either way the generator is a large gas appliance: Cummins lists full-load consumption of 217,227 BTU/hr on natural gas for the 13 kW and 255,947 BTU/hr for the 20 kW, on top of whatever the furnace, water heater and range already draw. Cummins also specifies the natural gas supply pressure at the generator, 3.5 to 12.0 inches of water column, so we check both the meter’s capacity and the pressure that will reach the unit before quoting.
Standard or extreme-cold
Cummins rates the standard air-cooled models to perform down to 0°F out of the box and the extreme-cold E models down to -40°F. A northern Illinois winter regularly tests that line; the City of Woodstock’s building code, for example, sets a 0°F winter design temperature for heating calculations. That is why the Cummins models on GSHA’s product pages are the E versions (RS13AE, RS17AE, RS20AE), and why we recommend an E model or a Cummins cold weather kit wherever the generator will sit in an exposed spot.
Air-cooled or liquid-cooled
The air-cooled QuietConnect™ line tops out at 20 kW. Above that, Cummins lists liquid-cooled QuietConnect™ models from 25 kW upward; the RS36 and RS40, for example, use a 2.4 L turbocharged four-cylinder engine running at 1800 rpm and are rated 63 dB(A) at 23 feet with the Sound Level 2 enclosure. Liquid-cooled units are larger, heavier and quoted individually; we recommend them only when load management cannot make an air-cooled unit fit.
Sizing, fuel and placement are confirmed for your home during the free estimate. GSHA counts the loads, checks the gas meter and piping, looks at the electrical service and panel, measures the proposed pad location against local setback rules, and quotes the generator, transfer switch and any load-management modules in writing.
Why the installation matters
Two homes can get the same Cummins generator and end up with very different results in an outage. The difference is the installation. These are the steps GSHA performs on every Cummins job.
- A load count, not a guess. We list the circuits you want carried, note the motors with high starting current (air conditioners, well pumps, sump pumps) and size the generator and load management to that list.
- The gas check. We add the generator’s full-load fuel demand to the appliances already on the meter, check the meter and house piping, and confirm the generator will see at least the minimum supply pressure Cummins specifies. When the meter cannot carry the total, the gas utility has to upgrade it, and we coordinate that before the installation date.
- The transfer switch. Our own licensed electricians install the automatic transfer switch between the utility meter and the panel. On a whole-house installation that usually means a service-entrance-rated switch; on older services we look at the meter socket and panel first, because the switch has to match what is on the wall.
- Placement. Cummins’ specification sheet says NFPA 37 permits the QuietConnect™ air-cooled units to be installed 18 inches from a building. Local codes can be stricter, for example about distance from windows, air intakes and lot lines, so we plan the pad against the municipal rule and the plat of survey. The air-cooled enclosure measures 34.1 by 36.0 by 27.3 inches and weighs 479 to 596 pounds depending on the model.
- Sound. Cummins rates the air-cooled QuietConnect™ units at 65 dB(A) at 23 feet at normal load, measured at the quietest point, and offers a crank-only exercise mode that reduces sound further during the weekly test. Where a village publishes lot-line noise limits, we place the unit and set the exercise mode with that rule in mind.
- Permits and inspections. GSHA prepares the drawings, pulls the electrical and gas permits from your municipality or county, and meets the inspectors. Once the permit is issued, most installations take one to two days on site.
- Start-up, connection and registration. We start the generator, test a transfer under load, set the exercise schedule, connect remote monitoring and walk you through the controller. Cummins’ specification sheet lists a base warranty of 5 years or 2,000 hours on the air-cooled QuietConnect™ line, and Cummins says extended options provide full coverage up to 10 years; we register the unit and give you the paperwork with your invoice.
Cummins service, repair and maintenance
A standby generator sits idle most of the year and then has to start the moment the power fails, often in the worst weather. GSHA’s technicians service and repair Cummins home standby generators whether or not we installed them. Typical visits cover the battery, oil and filter, spark plugs, air filter, enclosure and controller, a test transfer, and a review of the event log. If your generator shows a red ACTION REQUIRED or STANDBY OFF lamp, our Cummins fault-code guide explains what the codes mean, which checks are safe for a homeowner and when to call. For repairs and scheduled maintenance, see generator repair and generator maintenance, or call (224) 220-3660.
Cummins’ Connect Cloud app can share performance data with a Cummins authorized dealer if the owner opts in. If you choose to share it with GSHA, we can see a fault before you call, which shortens the visit.
Find your county
GSHA installs and services Cummins generators from two offices: Woodstock (McHenry County) and Lake Bluff (Lake County). Crews travel from those offices into Boone, Kane, DuPage, Cook and Will counties. Boone County is served from Woodstock; we have no office there, so please confirm your address with us when you call. Each county page covers the communities we serve, who issues the generator permit, the gas and electric utilities, and local placement, well, septic and flooding considerations. The ZIP-code list is the definitive coverage map.
- McHenry County, ILWoodstock office
- Lake County, ILLake Bluff office
- Boone County, ILserved from Woodstock; confirm your address
- Kane County, ILserved from Woodstock
- DuPage County, ILserved from Woodstock and Lake Bluff
- Cook County, ILserved from Lake Bluff and Woodstock
- Will County, ILserved from Lake Bluff
Questions and answers
Is GSHA an authorized Cummins dealer?
Yes. GSHA Services, LTD is an authorized Cummins dealer and installer for home standby generators. We sell, install, register and service Cummins QuietConnect™ generators and transfer switches with our own crews and our own licensed electricians.
What size Cummins generator does my house need?
It depends on what you want running, not on square footage. The air-cooled QuietConnect™ line comes in 13 kW (54.2 A), 17 kW (70.8 A) and 20 kW (75 A on natural gas, 83.3 A on propane), with built-in load management for up to four loads. At the free estimate we list your must-run circuits, account for the starting current of air conditioners and pumps, and recommend the smallest generator and load-management setup that covers them.
Will my gas meter need to be upgraded?
Sometimes. A Cummins 20 kW unit draws 255,947 BTU/hr of natural gas at full load and the 13 kW unit 217,227 BTU/hr, in addition to your furnace, water heater and other gas appliances, and Cummins specifies a minimum supply pressure of 3.5 inches of water column at the generator. We check the meter, regulator and piping at the estimate; if the meter is too small, the gas utility upgrades it and we coordinate the timing.
Can a Cummins generator run on propane?
Yes. Every air-cooled QuietConnect™ model is rated for natural gas or LP. The 13 kW and 17 kW carry the same amperage on either fuel, and the 20 kW is rated slightly higher on propane (83.3 A) than on natural gas (75 A). We size the propane tank, regulator and line with the supplier for rural homes without a gas main.
How cold can it get before a Cummins generator has trouble starting?
Cummins says its standard air-cooled models perform down to 0°F out of the box and its extreme-cold E models down to -40°F, with an overall operating range of 122°F to -40°F. Because northern Illinois winters reach that range, the Cummins models we list are the E versions, and we recommend an E model or a cold weather kit for exposed locations.
How close to the house can the generator go?
Cummins’ specification sheet states that NFPA 37 permits the air-cooled QuietConnect™ units to be installed 18 inches from a building. Your municipality may add rules about windows, air intakes, yards and lot lines, so the exact spot is set by the local code and your plat of survey, which we review before the permit is filed.
How loud is it?
Cummins rates the air-cooled QuietConnect™ units at 65 dB(A) at 23 feet at normal load and offers a crank-only exercise mode that is quieter still during the weekly self-test. The liquid-cooled RS36 and RS40 are rated 63 dB(A) at 23 feet with the Sound Level 2 enclosure.
What warranty comes with a Cummins home standby generator?
Cummins’ specification sheet for the air-cooled QuietConnect™ line lists a base warranty of 5 years or 2,000 hours, and Cummins says extended options provide full coverage up to 10 years. Liquid-cooled models have different terms. GSHA registers the generator at start-up and gives you the current warranty terms for the model you are quoted.
Do I need a permit?
In practice, yes, everywhere we work. A generator adds wiring and a gas connection, which every municipality and county in our area regulates. GSHA prepares the application, pulls the permit from the village, city or county that has jurisdiction over your address, and schedules and attends the inspections. Each county page lists the permit office for unincorporated addresses.
Are there any Cummins offers right now?
Ask GSHA about current Cummins offers. Promotions carry specific equipment lists, dates and rules, so we confirm what applies to your generator and installation date at the estimate. Financing through Synchrony and Service Finance is described on our financing page.
Do you service Cummins generators you did not install?
Yes. GSHA repairs and maintains Cummins home standby generators regardless of who installed them, and we service other generator brands too. Our fault-code guide covers the common lamps and codes; call (224) 220-3660 to schedule service.
Request a free Cummins installation estimate
Tell us about your home and the generator you are considering. We will follow up to schedule a free, no-obligation in-home visit, count the loads you want carried, check the gas meter, electrical service and placement, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA advisor reviews your panel, gas meter and the proposed pad location and explains the Cummins options that fit.
Written quote
You receive an itemized quote with the generator, transfer switch, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Cummins dealer for home standby generators. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Cummins generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Cummins Quiet Connect Series (RS13A, RS17A, RS20A, RS20AC) Specification Sheet, NAS-6254-EN (rev. 10/19): rated amps, engine, fuel consumption, gas pressure, sound, dimensions, weights, operating temperature, E models, load management, remote monitoring, base warranty, UL 2200 / NFPA 37, 18-inch clearance, 180 mph wind rating — https://mart.cummins.com/imagelibrary/data/assetfiles/0058055.pdf (accessed 2026-10-23)
- Cummins QuietConnect™ Series (home standby): noise, accessories, cold weather kits, load management kits, extended warranty up to 10 years — https://www.cummins.com/en-na/na/generators/home-standby/quietconnect-series (accessed 2026-10-23)
- Cummins QuietConnect™ Series product listing (RS13A through RS150 standby ratings) — https://www.cummins.com/generators/quietconnecttm-series?v=3151&application=Residential+Home+Standby (accessed 2026-10-23)
- Cummins RS13A product page — https://www.cummins.com/en-na/generators/products/rs13a (accessed 2026-10-23)
- Cummins RS17A product page — https://www.cummins.com/en-na/generators/products/rs17a (accessed 2026-10-23)
- Cummins RS20A product page — https://www.cummins.com/en-na/generators/products/rs20a (accessed 2026-10-23)
- Cummins Quiet Connect Series RS36 Specification Sheet, NAS-5777d-EN — https://mart.cummins.com/imagelibrary/data/assetfiles/0057915.pdf (accessed 2026-10-23)
- Cummins Quiet Connect Series RS40 Specification Sheet, NAS-5778d-EN — https://mart.cummins.com/imagelibrary/data/assetfiles/0057923.pdf (accessed 2026-10-23)
- Cummins home standby Automatic Transfer Switch page — https://www.cummins.com/en-na/na/generators/home-standby/automatic-transfer-switch (accessed 2026-10-23)
- Cummins Connect Cloud remote monitoring app page — https://www.cummins.com/en-na/na/generators/home-standby/app-remote-monitoring (accessed 2026-10-23)
- Cummins warranty information — https://www.cummins.com/en-na/generators/warranty-information (accessed 2026-10-23)
- City of Woodstock City Code Title 7 Chapter 1 (0°F winter design temperature) — https://codelibrary.amlegal.com/codes/woodstockil/latest/woodstock_il/0-0-0-13901 (verified by GSHA 2026-09-16)
- GSHA Cummins QuietConnect™ product pages (RS13AE, RS17AE, RS20AE) — https://gshaservices.com/product/cummins-quietconnect-20kw-generator-price-installation/ (accessed 2026-10-23)
- GSHA Services financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
- GSHA Services service-area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
