Authorized Champion dealer · Cook County, IL

Champion Generator Dealer Serving Cook County, IL

GSHA Services, LTD installs Champion home standby generators across most of Cook County from our Lake Bluff office at 11 N Skokie Hwy. We have no office inside Cook County, but most of it is close: the nearest north-suburban villages are about 10 miles (straight-line) from Lake Bluff, Chicago’s North Side about 23 and the Loop about 30, and the south and southwest suburbs we measured run about 40 to 49 miles, inside our standard 50-mile radius. A few northwest-edge communities, such as Elgin’s Cook County side, are closer to our Woodstock headquarters, and we dispatch from whichever office is nearer. We are an authorized Champion dealer and installer, with our own crews and licensed electricians.

Cook County’s housing shapes the Champion conversation more than anything else. Only about 45 percent of housing units are single-family houses, nearly 28 percent of houses were first built in 1939 or earlier, and lots are often tight. Older services, narrow side yards, combined sewers that back up in heavy rain, and three different gas utilities all bear on which Champion system fits and where it can go.

Request a free installation estimateCall (224) 220-3660

Champion 22kW fleX home standby generator in its outdoor enclosure

Communities we serve in Cook County

Straight-line miles from the nearer GSHA office to the community center. Cicero and Berwyn were not on our measured list, so their figures are estimated from neighboring Oak Park (27.4 miles).

CommunityMiles (nearer office)Champion-relevant note
Arlington Heights14.8 (Lake Bluff)Nicor Gas; combined and separate sewers per MWRD
Palatine15 (Lake Bluff)Partly in Lake County
Des Plaines17.1 (Lake Bluff)Combined and separate sewers per MWRD
Skokie17.9 (Lake Bluff)Cook County Building and Zoning keeps a satellite office here
Evanston18.1 (Lake Bluff)Nicor Gas; combined sewer system per MWRD
Schaumburg20.8 (Lake Bluff)Partly in DuPage County
Elgin (Cook portion)21.1 (Woodstock)Mostly Kane County; separate sewer system per MWRD
Ciceroapprox. 29 (Lake Bluff)Combined sewer system per MWRD
Chicago29.9 to the Loop; about 23 to the North Side (Lake Bluff)Peoples Gas; City of Chicago permits
Berwynapprox. 30 (Lake Bluff)Combined sewer system per MWRD
Oak Lawn39.5 (Lake Bluff)Inside our 50-mile radius
Orland Park44.8 (Lake Bluff)Small part in Will County

Tinley Park, at 48.9 miles, was the farthest southwest suburb we measured. Addresses more than 50 miles from both offices are quoted case by case. Check your ZIP on our service area page.

Which Champion generator fits a Cook County home

Older houses and older services

With 27.9 percent of the county’s houses built in 1939 or earlier and only 4.4 percent built since 2010 (Census Bureau, ACS 2019-2023), many Cook County homes still have an original-era service, meter socket or panel. A whole-house Champion, the 14 kW aXis or the 22 kW fleX, uses a service-entrance-rated transfer switch installed between the ComEd meter and your panel, so the existing equipment has to be up to it. A select-circuit Champion, the 8.5 kW or 12.5 kW, feeds a small outdoor sub-panel from a breaker in your existing panel and leaves the service alone. In an older bungalow or two-flat where the priority is the furnace, sump, refrigerator and lights, the select-circuit route is often the practical one. Our electricians look at what is actually on the wall before recommending either.

Tight side yards

Lots are close-set across much of the county, and the county’s generator permit sheet wants the unit’s distance from every lot line drawn on the site plan. Champion’s 8.5 kW, 12.5 kW and 14 kW aXis share a 49 by 28 inch footprint, while the 22 kW fleX is 59.4 by 31.5 inches. That difference often decides placement on a narrow city or inner-suburban lot. Champion publishes sound levels at 23 feet of 59.5 dB(A) for the 8.5 kW and 62 dB(A) for the 14 kW aXis, and we place the unit away from neighbors’ windows and doors.

Basement backups and the sump pump

The Metropolitan Water Reclamation District’s Cook County Flood Response Resource Guide (December 2025) explains that many communities have combined sewers carrying sewage and rainwater in the same pipes, that basement backups happen when rain enters neighborhood sewers faster than they can drain, and that a malfunctioning sump pump is one source of water in a home. It also notes most homeowner’s policies do not cover flooding. A sump pump protects a basement only while it has power, so it is the first circuit on every Champion system we install here, including the 8.5 kW, fully installed from $6,000 in GSHA’s published package.

Larger suburban homes

In the north and northwest suburbs, larger houses with central air, sometimes two systems, usually fit the Champion 14 kW aXis (14,000 W propane, 12,500 W natural gas, 5-ton AC rating) or the 22 kW fleX (22,000 W propane, 19,800 W natural gas; fully installed from $9,000) with a fleX Load Management Module.

Permits, utilities and installation considerations

City, village or county permit

Most Cook County residents live in a city or village, and that municipality issues the permit; the county’s e-permits page says it cannot process permits for the City of Chicago or for properties inside incorporated suburbs. Only about 2.4 percent of residents (126,114 people on a 2010 Census basis) live in unincorporated areas, according to the Civic Federation, with more than half of them in Bremen, Lemont, Leyden, Northfield, Maine and Orland townships. For those addresses the Cook County Department of Building and Zoning issues the permit. Generator is one of its online permit types, its e-permits page lists a $100 deposit, and it enforces the 2014 Cook County Electrical Code and, for drawings submitted after December 1, 2021, the 2021 International Residential Code with county amendments.

The county’s generator permit sheet asks for a plat of survey sealed by an Illinois surveyor and no more than five years old, a site plan with the unit’s distance from every lot line, a single-line diagram of the meter, main panel and transfer switch, cut sheets for the generator and switch, and letters of intent from a registered electrical contractor and a registered plumbing contractor. The department’s FAQ adds that references to the National Electrical Code must be removed from drawings, since the county uses its own electrical code. The sheet dates from 2015 and shows a different deposit formula than the current e-permits page, so we confirm fees when we apply. GSHA prepares the package from Champion’s cut sheets and our site measurements.

Three gas utilities

Nicor Gas serves most suburbs and some annexed areas of Chicago. Inside the city, Peoples Gas says it serves more than 898,000 customers. Along the lake, North Shore Gas serves nearly 166,000 customers in 54 communities between Winnetka and the Wisconsin border, and Nicor also lists some of those villages, so we confirm the utility from your bill. Gas heats 82.2 percent of occupied homes in the county (ACS 2019-2023, including bottled, tank and LP gas), so most houses already have a service line; the question is capacity. Champion lists full-load natural gas use of 139.8 cubic feet per hour for the 8.5 kW, 198.1 for the 12.5 kW and 292.6 for the 22 kW fleX. When the meter cannot carry that plus the furnace, water heater and range, we coordinate an upgrade with Nicor, Peoples Gas or North Shore Gas.

Electric: ComEd

ComEd’s territory takes in all of Cook County. The Champion switch isolates the house from ComEd’s lines in an outage and returns it to utility power when service is restored.

Wells and septic

Private wells and septic systems do exist in the county. The Cook County Department of Public Health reviews private sewage systems countywide except in incorporated Barrington Hills, Inverness, Palos Park and South Barrington, which have their own ordinances, and the county’s generator application asks whether the property is on well and septic. If you are on a well, the pump goes on the Champion load list and usually points to the 12.5 kW select-circuit system or a whole-house unit.

How a Cook County Champion job runs

  • Estimate. We check the panel, meter socket and service, identify your gas utility, measure the yard and list the circuits you want carried.
  • Drawings and permit. For Chicago or a suburb, we file with that building department; for an unincorporated address, we assemble the county’s plat, site plan, single-line diagram, cut sheets and letters of intent.
  • Utility work. We arrange any gas meter upgrade with the right utility before installation day.
  • Install and inspect. Our crew sets the unit and runs the gas line; our licensed electricians install the switch. Most installs take one to two days on site once the permit is issued, then the inspection.
  • Activation. We start the generator, test a transfer, set the exercise schedule, register it with Champion and walk you through it.

Matching a Champion to Cook County housing

HomeUsual starting pointWhy
Pre-war bungalow or older house, gas heat, basement sump8.5 kW select circuitLeaves an older service untouched; carries sump, furnace, refrigerator and lights. Fully installed from $6,000.
Older house with a sump and an ejector, a few more rooms wanted12.5 kW select circuitUp to 16 circuits through a 100 A outdoor switch.
Suburban house with one central air system and a modern 200 A service14 kW aXis, 200 A switchWhole-house coverage in the same 49 x 28 in. footprint as the smaller units.
Large north-suburban home, two air conditioners22 kW fleX with load managementChampion’s largest home standby; fully installed from $9,000.
Home on a private well12.5 kW or whole-house unitThe well pump’s starting load goes on the list; CCDPH or local septic rules affect placement.

Warranty and maintenance

Champion’s support center says its 10-year/2,000-hour limited warranty on air-cooled 8.5 to 20 kW home standby models runs from successful activation, requires registration and scheduled maintenance from the owner’s manual, and covers parts, labor and mileage for the first two years and parts only for years three through ten, with warranty work handled by an authorized or certified Champion home standby service dealer. Champion’s 22 kW pages list a 10-year limited warranty on the generator and 2 years on the switch. We register every system at start-up and keep the maintenance records. On older Cook County houses we also recommend checking the battery before winter, since Champion rates its 24 V starting systems down to -22 F only when the battery is healthy.

Champion products we install in Cook County

The same Champion lineup is available county-wide. Full specs, switch options and warranty details are on the main Champion page.

Champion 22kW fleX home standby generator

22 kW fleX whole house

22,000 W LP / 19,800 W NG with a service-entrance switch in 100, 150 or 200 A and optional fleX load management.

Fully installed from $9,000

Explore the 22 kW fleX
Champion 14kW aXis home standby generator

14 kW aXis whole house

14,000 W LP / 12,500 W NG with an aXis service-entrance switch and optional aXis load management.

Request installed pricing

Explore the 14 kW aXis
Champion 12.5kW home standby generator

12.5 kW select circuit

12,500 W LP / 11,000 W NG with a 100 A outdoor switch for up to 16 circuits.

Request installed pricing

Explore the 12.5 kW
Champion 8.5kW home standby generator

8.5 kW select circuit

8,500 W LP / 7,500 W NG with a 50 A outdoor switch for up to 12 essential circuits.

Fully installed from $6,000

Explore the 8.5 kW

Current Champion offers

Ask GSHA about current Champion offers.

Tell us your planned installation date when you book and we will tell you whether a Champion promotion applies to the model you are quoted. Financing through Synchrony and Service Finance, subject to credit approval, is described on our financing page.

Cook County Champion questions

Do you install Champion generators inside Chicago?

Yes. The North Side is about 23 miles and the Loop about 30 miles from our Lake Bluff office. Inside the city the gas utility is generally Peoples Gas and the permit comes from the City of Chicago, which we file.

Do I need a permit in unincorporated Cook County?

Yes. The Cook County Department of Building and Zoning issues generator permits for unincorporated areas, with a sealed plat, site plan, single-line diagram, cut sheets and letters of intent from registered electrical and plumbing contractors. GSHA prepares the package.

My house is old. Can it take a whole-house Champion?

Often, but the service has to be checked first, because a whole-house Champion switch is service-entrance equipment. If the panel or meter socket needs work, we tell you at the estimate, and we price a select-circuit option that leaves the service alone.

Which gas utility will you coordinate with?

Nicor in most suburbs, Peoples Gas in Chicago and North Shore Gas along the north shore between Winnetka and the Wisconsin border, where Nicor also serves some villages. We confirm from your bill.

Is Orland Park inside your service area?

Yes. Orland Park is 44.8 miles and Oak Lawn 39.5 miles straight-line from Lake Bluff, inside our 50-mile radius.

Are there Champion offers right now?

Ask GSHA about current Champion offers. We confirm any promotion against Champion’s terms and your installation date at the estimate.

Do you service Champion generators in Cook County?

Yes, whether or not we installed them; Champion makes scheduled maintenance a condition of its warranty. See our generator tune-up and generator repair pages.

More Champion pages

Authorized Champion dealer in Illinois (main page) · Champion prices and installation · Generator installation · Generator error codes guide

Other counties

Request a free Champion installation estimate

Tell us about your Cook County home and what you want to keep running in an outage. We will follow up to schedule a free, no-obligation in-home visit, count the loads, check the panel and the gas meter, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA advisor counts the loads, checks the electrical service and gas supply, and explains the Champion options that fit.

Written quote

You receive an itemized quote with the generator, transfer switch, permits, start-up and warranty registration included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured electrical, heating, cooling, plumbing and generator contractor and an authorized Champion dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Champion 201010, 22 kW with 100A Switch and fleX Technology — https://www.championpowerequipment.com/product/201010-22-kw-whole-house-home-standby-generator-and-100a-switch-with-flex-technology/ (accessed 2026-10-23)
  2. Champion 100837, 14 kW with 200A Switch and aXis Technology — https://championpowerequipment.com/?p=108378 (accessed 2026-10-23)
  3. Champion 100179, 12.5 kW Select Circuit with 100A Switch — https://www.championpowerequipment.com/product/100179-12-5-kw-home-standby-generator-with-100-amp-outdoor-switch (accessed 2026-10-23)
  4. Champion 100177, 8.5 kW Select Circuit with 50A Switch — https://www.championpowerequipment.com/product/100177-8-5-kw-home-standby-generator-with-50-amp-outdoor-switch/ (accessed 2026-10-23)
  5. Champion Support: Home Standby Generator Warranty — https://help.championpowerequipment.com/article/e9pbt6pk36-home-standby-generator-warranty (accessed 2026-10-23)
  6. GSHA Champion Generators prices and installation page — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/champion-generators-prices-and-installation-cost/ (accessed 2026-10-23)
  7. GSHA KOHLER Generator Installation in Cook County (verified county facts, distances and sources) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/kohler-generators-installation-cook-county/ (accessed 2026-10-23)
  8. U.S. Census Bureau ACS 2019-2023 Narrative Profile: Cook County — https://www.census.gov/acs/www/data/data-tables-and-tools/narrative-profiles/2023/report.php?geotype=county&state=17&county=031
  9. Nicor Gas: Where We Are — https://www.nicorgas.com/company/where-we-are.html
  10. Peoples Gas: Service Area — https://www.peoplesgasdelivery.com/company/area
  11. North Shore Gas: About — https://www.northshoregasdelivery.com/company/about
  12. Commonwealth Edison (Wikipedia) — https://en.wikipedia.org/wiki/Commonwealth_Edison
  13. Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits
  14. Cook County Generator Installation Permit Requirements (rev. 08/04/2015) — http://www.cookcountyil.gov/sites/g/files/ywwepo161/files/service/generatorinstallationrequirements.pdf
  15. Cook County Building and Zoning FAQ — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/faq-building_and_zoning.pdf
  16. Cook County Building and Zoning Code Posting — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/documents/2024-03/Code%20Posting%202023.pdf
  17. Civic Federation: Unincorporated Areas of Cook County — https://www.civicfed.org/sites/default/files/REPORT_UnincorporatedAreasofCookCounty.pdf
  18. Cook County Department of Public Health: Septic Systems — https://cookcountypublichealth.org/environmental-health/water-and-sewage/septic/
  19. MWRD Cook County Flood Response Resource Guide (12/15/2025) — https://www.mwrd.org/sites/default/files/2025-12/Flood_Resource_Guide_251215.pdf
  20. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/