Authorized Rinnai dealer · Cook County, IL
Authorized Rinnai Dealer in Cook County, IL
GSHA Services, LTD is an authorized Rinnai dealer and installer serving Cook County’s northern, northwestern and near-western suburbs, plus Tinley Park and Lemont. We have no office in Cook County: most Cook County work is dispatched from our Lake Bluff office in Lake County, and the county’s northwest edge is handled from Woodstock. Every Rinnai job includes sizing, removal of the old water heater or boiler, gas piping, venting and condensate, water connections, electrical work by GSHA’s own licensed electricians, the municipal permit and inspection, start-up and Rinnai registration.
Cook County has the oldest housing we serve. The median home was built in 1961, about 28 percent of units date from 1939 or earlier, and about 73 percent were built before 1980 (Census Bureau, ACS 2020-2024). Natural gas heats about 80 percent of occupied homes, electricity about 16 percent and propane about 1.5 percent. It is also the one county where all three gas utilities matter: Nicor Gas in most suburbs on our list, North Shore Gas from Winnetka north, and Peoples Gas in Chicago. That combination produces two very different Rinnai conversations: a combi boiler for a pre-war house with radiators, and a compact wall-hung SENSEI for a condo, townhome or tight basement.

Communities we serve in Cook County
Our published ZIP coverage in Cook County runs in three bands. Northwest: Arlington Heights, Elk Grove Village, Hoffman Estates, Mount Prospect, Palatine, Prospect Heights, Rolling Meadows, Schaumburg, Streamwood and Wheeling, plus Des Plaines and Park Ridge closer to O’Hare. North: Glencoe, Glenview, Golf, Kenilworth, Morton Grove, Northbrook, Skokie, Wilmette and Winnetka. Near west: Berkeley, Broadview, Franklin Park, Hillside, Melrose Park, River Grove, Schiller Park and Westchester. Tinley Park and Lemont round out the list on the south side.
County lines run through several of these towns, which only changes where the permit is filed. Palatine, Barrington and Buffalo Grove reach into Lake County; Schaumburg, Hanover Park and Bartlett reach into DuPage, and Bartlett into Kane as well; Lemont touches DuPage and Will; Tinley Park extends into Will; and part of Elgin (Hanover Township) is in Cook.
Only some City of Chicago ZIP codes are on the ZIP list. GSHA has worked at Chicago addresses and will look at yours, but Chicago addresses outside the listed ZIP codes, and towns that are not on the list, such as Berwyn, Cicero, Matteson and Richton Park, are confirmed address by address. Check the service area page or call (224) 220-3660.
Rinnai equipment guidance for Cook County homes
Pre-war houses with hot-water radiators. Nearly half of Cook County housing predates 1960, and radiators still heat a lot of homes in Wilmette, Winnetka, Kenilworth, Glencoe, Park Ridge, Skokie and the older near-west suburbs. Where a hot-water radiator system sits beside a separate tank heater, a Rinnai I-SERIES+ combi boiler replaces both with one wall-hung condensing unit and frees the floor space a cast-iron boiler occupied; Rinnai lists combi models from the IP060160C (60,000 BTU/h heating, 160,000 BTU/h hot water) to the IP199199C. Larger North Shore homes may need an I-SERIES+ solo boiler with an indirect tank. Steam is the exception: the I-SERIES+ is built for hot-water heating, so a one-pipe or two-pipe steam house gets its own evaluation. With hot-water radiators, the efficiency question is return temperature. The 2026 Peoples Gas and North Shore Gas application points out that a condensing boiler only hits its rating when the water coming back is cool enough to condense, which is why GSHA counts and measures the radiators, runs a heat-loss calculation and picks one of the seven I-SERIES+ reset curves to suit the house.
Condos and townhomes. More than half of Cook County’s housing units are in buildings with two or more units, and many of those owners are working with a tank heater in a utility closet. A wall-hung Rinnai SENSEI can free that closet, but venting is the deciding question: the unit needs a code-compliant plastic vent termination, often through an exterior wall the association must approve. The closet itself can be regulated too. In Palatine, for instance, a replacement heater in a confined space must have two ventilation openings of 100 square inches each, a brand-new installation may not go inside a storage closet, and a tankless permit needs a sketch locating the heater and the floor drain. GSHA checks the building, the association rules and the local code before quoting.
Northwest suburban single-family homes. In Arlington Heights, Palatine, Mount Prospect, Schaumburg and Hoffman Estates, houses built between the 1960s and the 1980s usually pair a gas furnace with a tank heater on one flue. Swapping the tank for a SENSEI RX or RXP takes the water heater off the chimney; GSHA then checks the furnace’s remaining flue. Most of these homes are Nicor Gas customers, where the tankless rebate does not apply to any Rinnai model, so the choice between a SENSEI and a non-condensing RE comes down to efficiency, venting and budget.
The North Shore and Chicago: the UEF number matters. From Winnetka north, and in Chicago, the gas bill comes from North Shore Gas or Peoples Gas, which share one 2026 HVAC and Water Heating application. It pays $150 for a power-vented tankless at 0.95 UEF or higher replacing a standard-efficiency, atmospherically vented tank. Rinnai’s SENSEI RX and RXP (0.97 to 0.98 UEF) meet that bar; the RE, REP and V Series (0.81 to 0.82 UEF) do not. In those neighborhoods GSHA quotes SENSEI models when a rebate is the goal.
Long, narrow houses and recirculation. Older Cook County homes often run hot water a long way from a front basement to a rear second-floor bath. A SENSEI RXP has the pump built in, and Smart-Circ schedules it around your household’s pattern instead of circulating hot water all day.
Permits, utilities and installation considerations
Water heater and boiler permits
Cook County’s own building department only handles unincorporated land; it does not issue permits inside Chicago or the incorporated suburbs (Cook County e-Permits). For almost every address on our list, then, the permit comes from the village or city. GSHA files it with the plumber’s letter of intent and the Rinnai specification sheet and is there for the inspection. Examples from the towns we checked:
- Palatine. Replacing or installing a water heater is on the village’s list of work that needs a permit, and the 2026 Water Heater Replacement handout handles it as an online Express permit. The handout is specific about the plumbing: install to the manufacturer’s instructions and the Illinois State Plumbing Code; a full-port shut-off on the cold line; dielectric unions where metals change; lead-free solder; rigid Type L copper rather than flex connectors; a full-size relief discharge that ends no more than 6 inches above the floor; a heat trap; bonding; and an 18-inch platform for a gas heater in a garage. For a tankless unit, Palatine also wants a drawing that shows the heater and the floor drain and a letter of intent from a Village-registered plumber, and the review can take up to five days. If you are without hot water, the work may begin as long as the permit application follows within one business day.
- Arlington Heights. Water heater replacement and boiler replacement are both over-the-counter permits, applied for in the Civic Access portal.
- Des Plaines and Park Ridge. Des Plaines accepts applications in its Customer Self Service portal (Building and Permits); Park Ridge books inspections one to two working days out (Permits and Inspections). GSHA confirms the water heater and boiler paperwork with each city when filing.
- Chicago (address confirmed first). The Department of Buildings exempts in-kind boiler repair or replacement, and heating elements such as radiators, in residential buildings of four stories or fewer. Going from a cast-iron boiler to a Rinnai condensing boiler is not in kind, so GSHA checks the permit route with the department.
- Unincorporated Cook County. Permits come from the Department of Building and Zoning.
Venting and chimneys in older buildings
Because SENSEI and I-SERIES+ units exhaust through plastic pipe, GSHA lays out the termination before filing: distance from windows and doors, distance from the house next door, and, in suburbs that regulate it, side-yard setbacks. Older houses add a chimney question. A pre-war masonry chimney often carried both the boiler and the water heater; if an I-SERIES+ combi replaces both, that chimney may no longer serve anything, but if only the water heater comes out, whatever still vents into the chimney has to be checked for draft. Peoples Gas and North Shore Gas make a liner mandatory when a high-efficiency furnace leaves a water heater alone in a chimney, and GSHA applies the same logic when the water heater is the one leaving. Condensate goes through a neutralizer before any drain.
Utilities and rebates
Three gas utilities serve the Cook County addresses we see. Most suburbs on our list are Nicor Gas territory, Chicago is Peoples Gas, and from Winnetka north it is North Shore Gas; on the North Shore we read the utility off your bill rather than guess. Electricity is ComEd except in Winnetka, which runs its own electric department, and the electric utility has no bearing on a gas water heater or boiler rebate. The 2026 programs:
- Peoples Gas and North Shore Gas (Peoples Gas rebates, North Shore Gas rebates, one shared HVAC and Water Heating application). Tankless: $150 for 0.95 UEF or better when it replaces an atmospheric, standard-efficiency gas tank, which a SENSEI RX or RXP satisfies and an RE, REP or V does not. Indirect tank on a condensing, modulating boiler: $150. Hot-water boiler at 95% AFUE: $350, with active outdoor-air reset. Two-in-one combi at 95% AFUE: $500, but only when it takes the place of both an existing gas boiler and an existing gas storage tank. Submit within 30 days of installation or by December 31, 2026, AHRI certificate attached.
- Nicor Gas (2026 rebates). Boiler at 95% AFUE or better: $350. Combination boiler at 95% AFUE with sealed combustion, a modulating burner and programmed outdoor reset: $500. Tankless: only units of 75 MBTUH or less, so no Rinnai tankless qualifies. Install during 2026; apply within 90 days or by January 31, 2027.
Rinnai rates the I-SERIES+ line at 96% AFUE, and GSHA confirms the AHRI listing for the exact model on your quote. Check current eligibility with your gas utility before you buy.
Gas, electrical and what GSHA handles
Both the RX199iN and the hot-water side of the IP120199C can draw 199,000 BTU/h through a 3/4-inch gas connection, so GSHA compares that with the meter and existing piping and upsizes where needed. The quote covers the new gas valve, isolation valves for future flushing, relief valve and expansion tank, vent and condensate neutralizer, the electrical hookup by GSHA’s own licensed electricians, the permit and inspection, start-up and Rinnai registration. Payment options are on GSHA’s financing page.
Rinnai products we install in Cook County
The full Rinnai residential lineup is available county-wide. Model-by-model ratings, flow rates and the utility rebate comparison are on the main Rinnai dealer page.
SENSEI RX
Condensing tankless, 0.97 to 0.98 UEF, natural gas or propane without a conversion kit.
Featured: RX130iN, RX160iN, RX180iN, RX199iN
Explore Rinnai tanklessSENSEI RXP
Condensing tankless with a built-in recirculation pump and Smart-Circ scheduling.
Featured: RXP160iN, RXP199iN
Explore SENSEI RXPRE and REP
Non-condensing tankless up to 199,000 BTU/h; REP adds a built-in pump.
Featured: RE160iN, RE199iN, REP199iN
Compare RE models
V Series
Compact non-condensing tankless; the V75iN is rated 7.5 GPM maximum flow.
Featured: V75iN, V53DeN
See the V SeriesI-SERIES+ combi boilers
Heat and on-demand hot water in one wall-hung unit; 96% AFUE series rating.
Featured: IP060160C to IP199199C
Boiler installationI-SERIES+ solo boilers
Heat-only condensing boilers with built-in zoning and outdoor reset.
Featured: IP060S to IP199S
Boiler installationREHP heat pump water heaters
Electric heat pump water heaters rated up to 4.0 UEF.
Featured: REHP50, REHP65, REHP80
Tank vs. tankless vs. heat pumpDirect vent furnaces
Ductless through-the-wall gas heat for garages, basements and additions.
Featured: EX08 to EX38
Request an estimateCurrent Rinnai offers
Ask GSHA about current Rinnai offers.
Manufacturer offers name specific models and dates, so tell us when you plan to install and we will tell you which offer, if any, applies. Separately from any promotion, Rinnai’s warranty page says its tankless water heaters come with 1 year of labor coverage, which can be extended to 5 years when the product is registered within 90 days of purchase; GSHA registers the equipment for you after start-up. Financing through Synchrony and Service Finance is described on our financing page.
Utility rebates run separately from any Rinnai offer; in Cook County, check current eligibility with Nicor Gas, Peoples Gas or North Shore Gas, whichever serves your address.
Questions and answers
Do you serve Chicago addresses?
Only some City of Chicago ZIP codes are on GSHA’s published list, and crews have worked at Chicago addresses, so we confirm city addresses one at a time. The same applies to Cicero, Berwyn and the other off-list towns named above. Call (224) 220-3660.
Which Rinnai tankless qualifies for the Peoples Gas or North Shore Gas rebate?
The SENSEI RX and RXP, rated 0.97 to 0.98 UEF, when they replace a standard-efficiency, atmospherically vented gas tank. Non-condensing RE, REP and V models do not meet the 0.95 UEF requirement. Apply within 30 days of installation or by December 31, 2026, with the AHRI certificate GSHA provides.
What does Palatine require for a tankless water heater?
An Express permit filed online, installation per the manufacturer and the Illinois State Plumbing Code, a diagram showing the heater and the floor drain, and a Village-registered plumber’s letter of intent; review can take five days. GSHA handles the paperwork and the inspection.
Can a Rinnai tankless go in my condo closet?
Sometimes. Venting is the deciding factor: the SENSEI needs a code-compliant plastic vent termination, usually through an exterior wall the association must approve. Local rules matter too; Palatine, for example, prohibits new installations inside a storage closet. GSHA checks the building, association rules and code before quoting.
Will a Rinnai combi boiler work with my radiators?
With hot-water radiators, often yes; GSHA inventories the radiators, calculates heat loss and sets the outdoor reset curve. A steam system is different, and the I-SERIES+ is a hot-water boiler, so steam homes get a separate evaluation.
Does Arlington Heights need a permit for a boiler or water heater replacement?
Yes. Both are listed as over-the-counter permits, filed through the village’s Civic Access portal. GSHA files and schedules the inspection.
Do you repair Rinnai units you did not install?
Yes. GSHA services Rinnai tankless water heaters and boilers regardless of who installed them, including older RL, RU, RUR, RUS and RUCS models. Call (224) 220-3660.
More Rinnai pages
Rinnai Authorized Dealer in Illinois (main page) · Rinnai water heaters: models and installation · Water heater services · Water heater replacement · Boiler installation · Tank vs. tankless vs. heat pump water heaters
Other counties
Request a free Rinnai installation estimate
Tell us about your home and the equipment you are considering in Cook County. We will follow up to schedule a free, no-obligation in-home visit, size the unit, check the existing gas, venting, condensate, water and electrical, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA comfort advisor checks the existing water heater or boiler and explains the Rinnai options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Rinnai dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Rinnai water heaters and boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API – ACS 2020-2024 5-year tables B25040 (house heating fuel), B25035 (median year built), B25034 (year built), Cook County (05000US17031) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17031 (accessed 2026-10-23)
- Share of Cook County housing units in multi-unit buildings, as cited on the GSHA Lennox Cook County page — https://gshaservices.com/lennox/cook-county-il/ (accessed 2026-10-23)
- Rinnai – Tankless Water Heaters (residential lineup, UEF by series) — https://www.rinnai.us/residential/tankless-water-heaters (accessed 2026-10-23)
- Rinnai SENSEI RX Series — https://www.rinnai.us/residential/sensei-rx (accessed 2026-10-23)
- Rinnai RX199iN product detail — https://www.rinnai.us/residential/product-detail/rx199in (accessed 2026-10-23)
- Rinnai SENSEI RXP Series — https://www.rinnai.us/residential/sensei-rxp (accessed 2026-10-23)
- Rinnai RE Model Series (non-condensing) — https://www.rinnai.us/residential/re-model-series (accessed 2026-10-23)
- Rinnai V75iN product detail — https://www.rinnai.us/residential/product-detail/v75in (accessed 2026-10-23)
- Rinnai I-SERIES+ boilers (combi and solo models, 96% AFUE, zones and reset curves) — https://www.rinnai.us/residential/i-series-plus (accessed 2026-10-23)
- Rinnai IP120199C combi boiler product detail — https://www.rinnai.us/residential/product-detail/ip120199c (accessed 2026-10-23)
- Rinnai Electric Heat Pump Water Heaters (REHP models) — https://www.rinnai.us/residential/electric-rehp-models (accessed 2026-10-23)
- Rinnai – Product Warranty (labor coverage and registration) — https://www.rinnai.us/support/warranty (accessed 2026-10-23)
- Rinnai IP060160C combi boiler product detail — https://www.rinnai.us/residential/product-detail/ip060160c (accessed 2026-10-23)
- Village of Palatine – When a Building Permit is Required — https://www.palatine.il.us/621/When-a-Building-Permit-is-Required (accessed 2026-10-23)
- Village of Palatine – 2026 Water Heater Replacement handout — https://www.palatine.il.us/DocumentCenter/View/721/Water-Heater-Replacement-PDF (accessed 2026-10-23)
- Village of Palatine – Express Building Permits — https://www.palatine.il.us/609/Express-Building-Permits (accessed 2026-10-23)
- Village of Arlington Heights – Over the Counter Permits — https://www.vah.com/over_the_counter_permits/index.php (accessed 2026-10-23)
- City of Des Plaines – Building and Permits — https://www.desplainesil.gov/Departments/Community-and-Economic-Development/Building-and-Permits (accessed 2026-09-16, via GSHA Lennox Cook County page)
- City of Park Ridge – Permits and Inspections — https://www.parkridge.us/your_government/city_departments/permits_and_inspections_2.php (accessed 2026-10-23)
- City of Chicago Department of Buildings – mechanical work not requiring a permit — https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/help/faq/DOB/bldg-permit-not-required/worktype/mechanical.html (accessed 2026-10-23)
- Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-09-16)
- Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (accessed 2026-09-16)
- Peoples Gas HVAC and Water Heating Application 2026 — https://www.peoplesgasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23)
- North Shore Gas HVAC and Water Heating Application 2026 — https://www.northshoregasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23)
- Peoples Gas residential rebates — https://www.peoplesgasdelivery.com/savings/rebates-residential (accessed 2026-10-23)
- North Shore Gas residential rebates — https://www.northshoregasdelivery.com/savings/rebates-residential (accessed 2026-10-23)
- Nicor Gas Residential Energy Efficiency Rebates 2026 (tankless, storage, boiler and combination-boiler measures) — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
- GSHA Rinnai Water Heaters page — https://gshaservices.com/plumbing-services/water-heaters-services/rinnai-water-heaters/ (accessed 2026-10-23)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
