Authorized Mitsubishi Electric dealer · Lake County, IL

Mitsubishi Electric Dealer Serving Lake County, IL

Lake County homeowners are served from GSHA’s Lake Bluff office at 11 N Skokie Hwy, inside the county, with our Woodstock headquarters next door in McHenry County. GSHA Services, LTD is an authorized Mitsubishi Electric dealer and installer: we design and install Mitsubishi ductless mini-splits, multi-zone systems, ducted heat pumps and intelli-HEAT dual-fuel systems, and we service Mitsubishi equipment no matter who installed it. Our own licensed electricians do the wiring, and every project starts with a free in-home estimate and a room-by-room load calculation.

Lake County’s housing points to where Mitsubishi systems fit best. In the Census Bureau’s 2020-2024 American Community Survey, about 83 percent of occupied homes heat with utility gas, about 15 percent with electricity and about 1 percent with propane, and the median home was built in 1983. A 15 percent electric-heat share is one of the higher figures in our service area, and every one of those homes is a candidate for a cold-climate Mitsubishi heat pump. In the gas-heated majority, the usual projects are a ductless system for the rooms the ducts serve poorly and intelli-HEAT for owners who want a heat pump without giving up the furnace.

Request a free installation estimateCall (224) 220-3660

Mitsubishi Electric MSZ-EF wall-mounted ductless indoor unit

Communities we serve in Lake County

The GSHA service area covers Antioch, Deerfield, Grayslake, Gurnee, Highland Park, Ingleside, Lake Bluff, Lake Forest, Lake Villa, Lake Zurich, Libertyville, Lincolnshire, Mundelein, Round Lake, Vernon Hills, Wadsworth, Wauconda, Waukegan and Zion. Barrington and Buffalo Grove are also on the list and reach into Cook County; Fox Lake and Island Lake reach into McHenry County. Because coverage follows the ZIP code, a county line does not change whether we serve you, but it does decide which permit office handles the job and, along the north shore and in the central county, which gas company is on your bill. Ingleside is unincorporated and permits through Lake County.

Winthrop Harbor, Beach Park, Kildeer, Deer Park, Long Grove and Hawthorn Woods are not named on the published list, though several share listed ZIP codes and our crews have worked in them recently. If you live there or elsewhere in the county, call (224) 220-3660 to confirm coverage. The full ZIP-code list is on the GSHA service area page.

Mitsubishi Electric guidance for Lake County homes

Electric-heat homes: replace resistance heat with a heat pump. Roughly one Lake County home in seven heats with electricity, whether baseboard heaters, an electric furnace or an older heat pump. A Mitsubishi Hyper-Heating INVERTER (H2i) system moves heat instead of making it with resistance elements, and Mitsubishi states its H2i heat pumps deliver 100% of rated heating capacity at 5°F, with operating limits below zero that vary by system. Where there are ducts, a Mitsubishi outdoor unit paired with an SVZ-NL multi-position air handler, which Mitsubishi positions to replace a furnace or forced-air system on the existing ductwork, can take over the whole house. Where there are none, a multi-zone system with wall-mounted or floor units does it room by room. GSHA sizes the system at local winter design conditions and plans backup heat for the coldest nights.

Gas homes: keep the furnace, add the heat pump. In the gas-heated majority, Mitsubishi’s intelli-HEAT puts a PAA-NL heat pump coil on top of an existing furnace and uses the existing ducts. It replaces the air conditioner for cooling and heats through most of the season; Mitsubishi’s intelligent switchover brings the furnace on in extreme cold. Mitsubishi requires an ANSI Z21.47/CSA 2.3 certified furnace, and GSHA checks the rating plate, age and blower before quoting it. In a 1983-era house the furnace may already be on its second replacement and still venting into a metal chimney, so we look at the venting and the ducts at the same visit and tell you plainly if the furnace should be replaced first.

Houses without ductwork. Some older Lake County homes, from Lake Forest and Lake Bluff to Highland Park and Libertyville, heat with a boiler and radiators and have never had central air. For those houses a multi-zone Mitsubishi system is often the cleanest way to add cooling and efficient heat: Mitsubishi says one multi-zone outdoor unit can connect to up to eight ductless or ducted indoor units, so wall units can serve the bedrooms, a floor console can sit where a radiator was, and a low-static SEZ-NL ducted unit hidden in the attic can serve a hallway and bath through short duct runs. The boiler can stay as backup heat.

Additions, sunrooms and quiet bedrooms. For the single problem room, a wall-mounted unit such as the MSZ-JX or MSZ-HX, which Mitsubishi lists at up to 20 SEER2 and down to 22 dB(A), is quiet enough for a bedroom and needs only a small hole through the wall. The MLZ-KX ceiling cassette is designed to fit between standard 16-inch joists for rooms with little wall space. Every system can be run from a wall controller, and select systems connect to Mitsubishi’s Comfort app; we confirm Wi-Fi compatibility on the quote and set up the app at start-up.

Permits, utilities and installation considerations

Permits and inspections. A new mini-split or heat pump is permitted and inspected by your municipality, or by the county for unincorporated addresses. GSHA prepares the application, attaches the Mitsubishi specification sheets and schedules the inspections. Here is what the offices we checked publish:

  • Unincorporated Lake County (including Ingleside): Planning, Building and Development (500 W Winchester Rd, Libertyville; 847-377-2600; online Permit ePortal) requires a building permit to install or alter equipment covered by the building, electrical or mechanical codes (Building Permits). The county’s registration-instead-of-a-permit route is limited to like-for-like air conditioner swaps that stay no closer to a lot line, so a new ductless system, which adds equipment and a new outdoor location, goes through the permit process.
  • Village of Lake Bluff: The Building Division (847-283-6885) requires permits for projects that alter or improve a property and requires every contractor working in the village to hold a village contractor’s license (Building Permit Process). The permit application has an HVAC contractor line, and the village’s adopted codes include the 2018 mechanical and fuel gas codes and the 2017 National Electrical Code.
  • Village of Libertyville: For air conditioning, the Residential Permits page asks for a plat of survey showing the unit location, the HVAC contract and the unit specification sheet, and refers to screening for new or replacement units; mechanical applications can be emailed through the online permit page.
  • Village of Grayslake: Nearly every building or property change needs a permit, with HVAC named as an example (Building FAQs). In Prairie Crossing the village issues the permit but Lake County reviews and inspects, and the village’s construction handout sets work hours of 7 a.m. to 7 p.m. weekdays and 8:30 a.m. to 5 p.m. Saturdays.
  • Village of Mundelein: A central air conditioner needs a permit with an electronic plat of survey showing the outdoor unit location and the equipment cut sheets; inspections need 48 hours’ notice (Homeowner Project Guide; Building & Construction Permits). GSHA confirms the current fee when it applies.

Where the outdoor unit can go. A ductless outdoor unit is compact and can often hang on a wall bracket, but placement rules still apply. Mundelein’s Municipal Code 20.52.060(K) limits ground-based HVAC equipment to interior side and rear yards, at least five feet from the rear lot line and three feet from an interior side line, never in a front or corner side yard, and fully screened where visible from a neighbor or the street; the village guide adds that the disconnect must be within sight of the unit and not behind it unless 36 inches of clearance is left. Mundelein’s noise chapter sets lot-line limits of 55 dBA at night and 60 dBA by day but exempts HVAC systems in good repair operating within manufacturer’s specifications. Libertyville wants the unit shown on the plat and screened, and its zoning code applies octave-band sound limits measured inside the receiving residence. We could not verify a setback or noise rule for Lake Bluff or Grayslake, so GSHA confirms placement with the village at permit time.

Utilities. Lake County has two gas utilities and one electric utility. North Shore Gas serves the eastern and central county (its tariff lists Deerfield, Highland Park, Lake Bluff, Lake Forest, Libertyville, Vernon Hills and Zion, among others), and Nicor Gas serves the west and northwest (Barrington, Fox Lake, Ingleside, Lake Zurich, Round Lake and Wauconda, among others); Antioch, Grayslake, Gurnee, Lake Villa, Mundelein and Waukegan appear on both lists, so your bill or Nicor’s ZIP lookup settles it. ComEd delivers electricity across the whole county, and Lake County has no municipal electric utility.

Incentives for a Mitsubishi system. For heat pumps the relevant program is ComEd’s. ComEd’s Home Heating & Cooling Discounts cover ducted and ductless mini-split heat pumps, applied at the point of sale through participating heat-pump-trained contractors, with eligibility rules ComEd sets and offers that can change. The gas utilities’ residential rebates from Nicor Gas and North Shore Gas are aimed at gas furnaces and smart thermostats, which can matter if an intelli-HEAT project also includes a new furnace. Check current eligibility with each utility, and ask GSHA which programs the equipment on your quote qualifies for.

Electrical, line sets and what GSHA handles. GSHA’s own licensed electricians install the dedicated circuit and outdoor disconnect and check panel capacity for whole-home systems. We pressure-test and evacuate every line set, run exterior lines in a cover, route condensate so it does not freeze on a walk, set the outdoor unit above the snow line, pull the permit, attend the inspections, commission the system, set up the controls and register the Mitsubishi warranty.

Mitsubishi Electric products we install in Lake County

The same eight categories are available county-wide. Models, published ratings and sources are on the main Mitsubishi Electric page.

Mitsubishi Electric wall-mounted ductless indoor unit

Wall-Mounted Ductless

Single rooms, additions and open areas, alone or as part of a multi-zone system.

MSZ-FX, GX, EX, JX, WX, HX

Details

Floor-Mounted

A low console where a radiator or baseboard heater used to be.

MFZ-KX

Details

Ceiling Cassettes

Recessed units that keep walls clear in kitchens and basements.

MLZ-KX, SLZ-NL

Details

Ducted Air Handlers

Whole-home heat pumps on existing ducts, or short-run units for one or two rooms.

SVZ-NL, PVA-NL, SEZ-NL

Details

Multi-Zone Systems

One outdoor unit, up to eight indoor units, a setting for every room.

MXZ, SMART MULTI H2i

Details

intelli-HEAT Dual Fuel

A heat pump coil on your gas furnace, with automatic switchover in extreme cold.

PAA-NL

Details

Controls & Comfort App

Wall controllers and smartphone control for select systems.

Comfort app, MHK2

Details

Lossnay Ventilation

Energy recovery ventilation for tighter homes and additions.

Residential Ducted Lossnay ERV

Details

Current Mitsubishi Electric offers

Ask GSHA about current Mitsubishi Electric offers.

Promotions change through the year and name their own equipment and dates, so we confirm what applies to your system and installation date at the estimate. Financing through Synchrony and Service Finance is described on our financing page.

Utility incentives are separate from manufacturer offers. Check current heat-pump eligibility with ComEd; we confirm what applies at the estimate rather than promising an incentive up front.

Questions and answers

Do you serve my address in Lake County?

Yes, if it is in a listed community: Antioch, Barrington, Buffalo Grove, Deerfield, Fox Lake, Grayslake, Gurnee, Highland Park, Ingleside, Island Lake, Lake Bluff, Lake Forest, Lake Villa, Lake Zurich, Libertyville, Lincolnshire, Mundelein, Round Lake, Vernon Hills, Wadsworth, Wauconda, Waukegan or Zion. Elsewhere, call (224) 220-3660 and we will confirm your address.

My house has radiators and no ducts. Can I get central-style cooling?

Yes. A multi-zone Mitsubishi system adds cooling and efficient heat without ductwork: one outdoor unit can serve up to eight indoor units, per Mitsubishi, mixing wall units, floor consoles and short-run ducted units in the attic. The boiler can stay in place for backup heat.

Can I keep my gas furnace and still get a heat pump?

Yes, with intelli-HEAT, if the furnace meets Mitsubishi’s ANSI Z21.47/CSA 2.3 certification requirement and is in good condition. The heat pump handles cooling and most heating; the furnace takes over automatically in extreme cold.

Does Lake Bluff require anything special from the contractor?

Lake Bluff requires every contractor working in the village to hold a village contractor’s license and issues permits from Village Hall. GSHA handles the licensing and the permit as part of the job.

Where can the outdoor unit go in Mundelein?

Ground-based HVAC equipment in Mundelein belongs in an interior side or rear yard, at least five feet from the rear lot line and three feet from an interior side line, screened where visible from a neighbor or the street, with the disconnect within sight. GSHA lays this out on the plat of survey the village asks for.

Which incentives apply to a Mitsubishi heat pump in Lake County?

ComEd’s Home Heating & Cooling Discounts for ducted and ductless mini-split heat pumps, applied through participating contractors and subject to rules that can change. ComEd serves the whole county. Gas-utility rebates are aimed at furnaces and thermostats. Check current eligibility with ComEd before you decide.

Are there Mitsubishi Electric offers right now?

Ask GSHA about current Mitsubishi Electric offers. We confirm what applies to your equipment and installation date when you book.

What does the estimate include?

A room-by-room load calculation, a recommended Mitsubishi system with the published ratings of that exact pairing, the line-set route and outdoor unit location, electrical work by our own licensed electricians, permits and inspections, start-up, controls and app setup, a walkthrough and warranty registration. Published single-zone pricing is on our Mitsubishi ductless page.

More Mitsubishi Electric pages

Authorized Mitsubishi Electric dealer in Northern Illinois (main page) · Mitsubishi ductless prices and installation · Ductless systems · Best ductless brands for home additions

Other counties

Request a free Mitsubishi Electric installation estimate

Tell us about your Lake County home and the rooms you want to heat and cool. We will follow up to schedule a free, no-obligation in-home visit, measure the load room by room, check where the outdoor unit and lines can go and look at your electrical panel, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA comfort advisor measures the rooms, checks the existing system and explains the Mitsubishi Electric options that fit.

Written quote

You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing, water treatment and generator contractor and an authorized Mitsubishi Electric dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Census Reporter API — ACS 2020-2024 5-year tables B25035, B25040, B25003, Lake County (05000US17097) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040,B25003&geo_ids=05000US17097 (accessed 2026-09-16)
  2. Lake County — Building Permits — https://www.lakecountyil.gov/740/Building-Permits (accessed 2026-09-16)
  3. Lake County — Registrations Instead of a Permit — https://www.lakecountyil.gov/762/Registrations-Instead-of-a-Permit (accessed 2026-09-16)
  4. Village of Lake Bluff — Building Permit Process — https://www.lakebluff.org/departments-services/community-development/50-building-permit-process (accessed 2026-09-16)
  5. Village of Lake Bluff — Building permit application — https://www.lakebluff.org/sitemedia/documents/Applications/CommDev_Building.pdf (accessed 2026-09-16)
  6. Village of Lake Bluff — Adopted Building Codes — https://www.lakebluff.org/departments-services/community-development/1003-adopted-building-codes (accessed 2026-09-16)
  7. Village of Libertyville — Residential Permits — https://www.libertyville.com/departments/community_development/building/general_permit/residential_permit.php (accessed 2026-09-16)
  8. Village of Libertyville — Online permit application — https://www.libertyville.com/departments/community_development/building/online_permit_application.php (accessed 2026-09-16)
  9. Village of Libertyville Zoning Code Sec. 26-12-2 Noise — https://library.municode.com/il/libertyville/codes/code_of_ordinances?nodeId=LIILMUCO_CH26ZO_ART12PEST_S26-12-2NO (accessed 2026-09-16)
  10. Village of Grayslake — Building FAQs — https://www.villageofgrayslake.com/669/Frequently-Asked-Questions-FAQs (accessed 2026-09-16)
  11. Village of Grayslake — General Construction Information handout — https://villageofgrayslake.com/DocumentCenter/View/10574/BDH-1-General-Construction-Information-Handout (accessed 2026-09-16)
  12. Village of Mundelein — Homeowner Project Guide — https://www.mundelein.org/DocumentCenter/View/4301/Project-Information-Packet—050426-PDF (accessed 2026-09-16)
  13. Village of Mundelein — Building & Construction Permits — https://www.mundelein.org/405/Building-Construction-Permits (accessed 2026-09-16)
  14. Village of Mundelein Municipal Code 20.52.060 Permitted encroachments — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT20ZO_CH20.52TEDEST_20.52.060PEEN (accessed 2026-09-16)
  15. Village of Mundelein Municipal Code Chapter 9.08 Noise — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT9OFEAMOSA_CH9.08NO_9.08.020NOPR (accessed 2026-09-16)
  16. Nicor Gas — Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-09-16)
  17. Nicor Gas — Residential Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
  18. North Shore Gas — Residential rebates — https://www.northshoregasdelivery.com/savings/rebates-residential (accessed 2026-09-16)
  19. ComEd — Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
  20. Mitsubishi Electric — Wall-mounted products — https://www.mitsubishicomfort.com/products/wall-mounted (accessed 2026-10-23)
  21. Mitsubishi Electric — Ducted solutions (SVZ-NL, SEZ-NL, multi-zone) — https://www.mitsubishicomfort.com/products/ducted-solutions (accessed 2026-10-23)
  22. Mitsubishi Electric — Ceiling cassettes — https://www.mitsubishicomfort.com/products/ceiling-cassette (accessed 2026-10-23)
  23. Mitsubishi Electric — intelli-HEAT dual fuel system — https://www.mitsubishicomfort.com/intelli-heat (accessed 2026-10-23)
  24. Mitsubishi Electric — Mythbusters: heat pumps for extreme cold climates — https://www.mitsubishicomfort.com/blog/mythbusters-heat-pumps-for-extreme-cold-climates (accessed 2026-10-23)
  25. Mitsubishi Electric — Comfort app — https://www.mitsubishicomfort.com/comfort-app (accessed 2026-10-23)
  26. GSHA Services — Service area (ZIP list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)