Authorized MagicPak Dealer · Kane County, IL

MagicPak Dealer Serving Kane County, IL

GSHA Services, LTD serves Kane County MagicPak owners from our headquarters at 1257 Cobblestone Way, Suite A, Woodstock, with support from our Lake Bluff office; we have no office in Kane County itself. As an authorized MagicPak dealer and installer, GSHA replaces and services MagicPak all-in-one units in condominiums, apartments and townhome communities from Elgin and the Dundees to St. Charles, Geneva, Batavia and Aurora, with our own crews and our own licensed electricians handling every part of the job.

Kane County has the highest share of townhomes and other single-family attached homes of the counties we serve: about 22,800 units, or 12.0 percent of roughly 190,900 housing units, plus about 34,500 (18.1 percent) in buildings with two or more homes (U.S. Census Bureau, American Community Survey 2020-2024). Two more local facts shape MagicPak advice here: Nicor Gas serves the whole county, and three Fox River cities, Batavia, Geneva and St. Charles, run their own electric utilities instead of ComEd.

Request a free installation estimateCall (224) 220-3660

MagicPak M-Series single packaged vertical unit cabinet

Communities we serve in Kane County

GSHA’s service-area ZIP list includes St. Charles, Geneva (the county seat), Batavia, Elgin, Aurora, Carpentersville, East Dundee and West Dundee, Hampshire, Algonquin, Huntley, Bartlett and the unincorporated Wasco area. Several of these cross county lines: St. Charles and Batavia extend into DuPage County, Elgin into Cook, Aurora into DuPage, Kendall and Will, and Algonquin and Huntley into McHenry County. The permit office and, in the Fox River cities, the electric utility depend on which side of the line your building sits.

South Elgin, North Aurora, Montgomery, Sugar Grove, Elburn and Gilberts are also on our published ZIP list. Campton Hills, Pingree Grove and Sleepy Hollow are not named on it, although they use listed ZIP codes such as 60175, 60140 and 60118, so please confirm coverage before scheduling. The full list is on our service area page.

Multi-unit housing in Kane County

The Census units-in-structure table counts all housing units, occupied or vacant; it does not identify which buildings have MagicPak equipment, but it shows where all-in-one units are likely to be.

Type of structureHousing unitsShare
One unit, detached131,92269.1%
One unit, attached (townhomes, rowhouses)22,84212.0%
Buildings with 2 to 4 units12,3686.5%
Buildings with 5 to 19 units11,3295.9%
Buildings with 20 or more units10,8505.7%

Source: U.S. Census Bureau, ACS 2020-2024 5-year estimates, table B25024, Kane County. Mobile homes and other types make up the remainder.

The multi-unit stock is spread fairly evenly across small, mid-sized and large buildings, with the larger buildings concentrated in Elgin and Aurora and many townhome and garden-condominium developments in the Fox Valley. About 86 percent of occupied homes in the county heat with utility gas, 11.5 percent with electricity and 1.5 percent with propane, and the median home was built in 1985 (ACS 2020-2024, tables B25040 and B25035). Many of the county’s 1980s and 1990s multi-unit buildings are reaching their second round of equipment replacement.

MagicPak guidance for Kane County homes

Gas units on Nicor. Where each home has its own gas line, the MGE9 (95% AFUE, up to 11.7 SEER2, 20,000 to 50,000 BTU/h gas input) and MGE8 (80% AFUE, up to 13.4 SEER2, 15,000 to 60,000 BTU/h) are MagicPak’s current M-Series gas options. The MGE9’s FreezeShield circulates flue gas to keep condensate from freezing, and its telescoping flue adjusts for different wall thicknesses. In Elgin, any gas piping change also has to meet the city’s rule on pipe material, described below.

Electric units in the Fox River cities. If your building is in Batavia, Geneva or St. Charles and your unit is all-electric, the electricity comes from the city’s own utility. That affects which incentive programs apply to an MHP heat pump, not which unit fits. The MHP (0.75 to 3.0 tons, up to 13.4 SEER2 and 6.7 HSPF2, 3 to 10 kW electric heat) and the MCE (0 to 10 kW electric heat, up to 13.4 SEER2) are the M-Series electric options.

Choosing between heat pump and electric heat. A heat pump moves heat from outdoor air into the home rather than making it with resistance coils, so in spring and fall an MHP typically uses less electricity for the same heat than an MCE. On the coldest days its electric heat does more of the work. We compare the two for your home, including whether the existing circuit supports the unit’s electric heat.

Closet and sound. In townhomes the unit closet is often next to a bedroom or living area. We check the return-air path and duct connections, which usually decide how loud a closet unit sounds, and seal the top-of-cabinet duct connections MagicPak’s M-Series uses.

Townhome communities and attached homes

With about one Kane County home in eight a single-family attached home, many of our Kane County MagicPak calls come from townhome owners. Townhomes sit between a condominium and a detached house, and the rules differ from community to community:

  • Who owns the wall. In some townhome communities the owner owns the exterior wall and the association only regulates its appearance; in others the association owns or maintains it. Your declaration and rules say which.
  • Louver appearance. Associations often care that louvers match along a row. MagicPak offers louvers in a range of colors and finishes, including custom paint, and we quote the finish your association specifies.
  • Exterior work. If a replacement changes the wall opening or vent termination, it is exterior work, and most associations want to review it before it happens.
  • Neighbors. In attached homes the unit closet may share a wall with the neighbor. Proper mounting, sealing and duct connections keep sound and vibration where they belong.

Ask your board or management company what they need before we schedule. GSHA supplies the MagicPak specification sheet, louver finish, any change to the opening or vent, and our certificate of insurance.

MHP or MCE: comparing MagicPak’s electric units

About 11.5 percent of Kane County’s occupied homes heat with electricity, and in apartment and condominium buildings that share is often higher. For an all-electric MagicPak closet, the two current M-Series options compare like this, using MagicPak’s published figures:

MHP heat pumpMCE electric/electric
How it heatsHeat pump moves heat from outdoor air indoors, with electric heat strips as backupElectric resistance heat only
Cooling capacity0.75 to 3.0 tons0.75 to 3.0 tons
Heating8,600 to 31,000 BTUH by heat pump; 3 to 10 kW electric heat0 to 10 kW electric heat
EfficiencyUp to 13.4 SEER2, 10.6 EER2 and 6.7 HSPF2Up to 13.4 SEER2 and 10.6 EER2
CabinetLess than 1.4% cabinet air leak; IPX1 and IPX4 ratedLess than 1.4% cabinet air leak; IPX1 and IPX4 rated

In practice, the MHP earns its keep in the spring and fall, when a heat pump delivers more heat per unit of electricity than resistance strips; on the coldest January nights both units lean on electric heat. The MCE is simpler and suits interior homes with small heating loads. Which is better for you depends on how much heating your home needs, whether your circuit supports the unit’s electric heat, and which electric utility serves you, since ComEd’s heat pump programs do not apply in Batavia, Geneva or St. Charles. We quote both whenever both fit.

Permits, utilities and installation considerations

Permits by municipality

Kane County’s rules are set town by town. GSHA pulls the permit and schedules the inspection:

  • St. Charles. The city’s Building Permits FAQs say a permit and final inspection are required when a furnace or air conditioner is replaced. The Wasco area is unincorporated and permits through Kane County.
  • Geneva. The Building Division’s Furnace/Air Conditioner/HVAC Replacement handout requires a permit before replacing a furnace or air conditioner, covers both under one permit, lists a $50 fee (as published in September 2026) and asks 24 hours’ notice for inspections. Its checklist includes venting, a gas shut-off valve within 6 feet of each appliance with a union and sediment trap, combustion air and breaker sizing, all of which apply to a gas MagicPak.
  • Batavia. The Building Permit Applications page lists heating, air conditioning and mechanical equipment among projects that need a permit, through the online One Stop Permit Portal; the fee schedule prices replace-only permits at $30 for an A/C condenser and $45 for a furnace or furnace-and-A/C combination (as published in September 2026).
  • Elgin. Ordinance G15-25 requires a permit to install or alter any HVAC equipment, issued only to licensed warm-air heating contractors or the owner-occupant, and requires interior gas piping to be schedule 40 black iron from the meter to the appliance connector, with limited exceptions. The city’s HVAC Quick Guide uses a Quick Permit with a final inspection.
  • Unincorporated Kane County. The Building & Zoning Division permits unincorporated properties through the county web portal and asks 48 to 72 hours’ notice for inspections.
  • Aurora and others. GSHA confirms the permit path for your address before work starts.

None of these pages sets a separate rule for through-the-wall packaged units, so a MagicPak is permitted as a heating and cooling replacement; where a handout is written around split systems, we confirm with the department how it applies.

No condenser, so the yard rules rarely apply

St. Charles, Geneva, Elgin and Batavia all regulate where an outdoor air conditioner can sit in the yard. A MagicPak has no outdoor condenser, so those setback rules are rarely the issue. The exterior wall is: a change to the louver or vent termination changes the facade, which is a matter for the owner, the association and sometimes the building department.

Utilities and incentives

Nicor Gas serves Kane County’s municipalities and the unincorporated land around them; its ZIP lookup confirms an address. Nicor’s residential rebates tier furnace rebates at 95 and 97 percent AFUE, and its rebate FAQ explains that only contractors enrolled in its Contractor Circle can offer the rebate as an instant discount; whether a gas packaged unit such as the 95% AFUE MGE9 qualifies is set by Nicor’s equipment rules, so we check first. Rental owners with three or more units can look at Nicor’s Multi-Family Savings program. Outside the Fox River cities, ComEd’s Home Heating & Cooling Discounts cover heat pumps under eligibility rules that can change. Batavia, Geneva and St. Charles run city electric utilities outside ComEd’s program, and the Geneva and St. Charles utility pages list no HVAC rebate; Nicor’s gas programs still apply there. Check current eligibility with each utility.

Gas, electrical and condensate

GSHA reconnects or modifies the gas piping to the code your town enforces, with the shut-off and sediment trap Geneva’s checklist calls out, and our licensed electricians size the breaker and disconnect to the new nameplate. We confirm the condensate path in the closet and wall, which matters most for a condensing MGE9 in winter.

MagicPak products we install in Kane County

The full MagicPak line is available county-wide. Specs are on the main MagicPak page.

Cutaway of a MagicPak gas heat and electric cooling M-Series unit

MGE9 and MGE8 gas/electric

95% AFUE MGE9 with FreezeShield, or the 80% AFUE MGE8.

GSHA MGE product page

V-Series, sleeves and louvers

V-Series HWC and EWC units, wall sleeves and louvers.

All MagicPak products

Current MagicPak offers

Ask GSHA about current MagicPak offers.

Financing programs available through GSHA are on our financing page. Utility incentives run separately; check current eligibility with Nicor Gas and your electric utility.

Questions and answers

I live in Geneva. Does a MagicPak replacement need a permit?

Geneva’s handout requires a permit before replacing a furnace or air conditioner and covers both under one permit, so a MagicPak, which is both in one cabinet, is handled as a heating and cooling replacement. GSHA files it and meets the inspector.

My townhome is in St. Charles. Do ComEd rebates apply?

No. St. Charles, Geneva and Batavia run their own electric utilities, so ComEd’s programs do not apply to their electric customers; the Geneva and St. Charles utility pages list no HVAC rebate. Nicor Gas’s programs still apply if you have gas.

Does Elgin require a licensed contractor?

Elgin’s Ordinance G15-25 says HVAC permits are issued only to licensed warm-air heating contractors or the owner-occupant. GSHA pulls the permit for your job.

Our association wants every louver to match. Can you do that?

MagicPak offers louvers in a range of colors and finishes, including custom paint. Give us your association’s specification and we quote the matching finish.

Can I get the Nicor rebate as an instant discount?

Nicor’s rebate FAQ says only contractors enrolled in its Contractor Circle can offer that. Ask us at the estimate whether that applies to your installation and whether your MagicPak model qualifies; otherwise the homeowner applies directly.

Do I need to register my new MagicPak for the warranty?

MagicPak states that no registration is required for new single packaged vertical units, and lists a 5-year limited parts warranty and a 20-year limited warranty on the stainless steel heat exchanger. Keep GSHA’s invoice with the model and serial number; claims are handled through a local MagicPak registered distributor.

What affects the installed price in Kane County?

The model and size, any change to the sleeve, louver or vent, gas piping work to your town’s code, electrical changes, building access and the permit fee. Every job is quoted after a free on-site estimate.

More MagicPak pages

MagicPak authorized dealer in Illinois (main page) · Magic-Pak package units · MGE · MHP · MCE

Other counties

Request a free MagicPak installation estimate

Tell us about your home and the unit you are replacing in Kane County. We will follow up to schedule a free, no-obligation visit, measure the closet and wall opening, check the vent, gas, electrical and ductwork, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

On-site visit

A GSHA comfort advisor measures the unit, checks the existing installation and explains the MagicPak options that fit.

Written quote

You receive an itemized quote with the equipment, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized MagicPak dealer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. MagicPak M-Series overview — https://www.magicpak.com/products/m-series (accessed 2026-10-23)
  2. MagicPak MGE9 — https://www.magicpak.com/products/m-series/mge9 (accessed 2026-10-23)
  3. MagicPak MGE8 — https://www.magicpak.com/products/m-series/mge8 (accessed 2026-10-23)
  4. MagicPak MHP — https://www.magicpak.com/products/m-series/mhp (accessed 2026-10-23)
  5. MagicPak MCE — https://www.magicpak.com/products/m-series/mce (accessed 2026-10-23)
  6. Census Reporter, ACS 2020-2024 5-year, table B25024 Units in Structure, Kane County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25024&geo_ids=05000US17089 (accessed 2026-10-23)
  7. Census Reporter, ACS 2020-2024 5-year, tables B25040 and B25035, Kane County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035&geo_ids=05000US17089 (accessed 2026-10-23)
  8. City of St. Charles – Building Permits FAQs — https://www.stcharlesil.gov/Services/Forms-Permits-Applications/Building-Permits/Building-Permits-FAQs (accessed 2026-09-16)
  9. City of Geneva – Furnace/Air Conditioner/HVAC Replacement handout — https://www.geneva.il.us/DocumentCenter/View/14/Furnace-and-Air-Conditioner (accessed 2026-09-16)
  10. City of Batavia – Building Permit Applications — https://www.bataviail.gov/o/ed/page/building-permit-applications (accessed 2026-09-16)
  11. City of Batavia – Building Permit Fee Schedule — https://www.bataviail.gov/o/ed/page/building-permit-fee-schedule (accessed 2026-09-16)
  12. City of Elgin – Local HVAC Amendments (Ordinance G15-25) — https://elginil.gov/DocumentCenter/View/830/Local-HVAC-Amendments (accessed 2026-09-16)
  13. City of Elgin – Miscellaneous HVAC Quick Guide — https://elginil.gov/DocumentCenter/View/75851/Misc-HVAC-Quick-Guide- (accessed 2026-09-16)
  14. Kane County Building & Zoning Division — https://www.kanecountyil.gov/FDER/Pages/Development/Building%26ZoningDivision.aspx (accessed 2026-09-16)
  15. Nicor Gas – Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-09-16)
  16. Nicor Gas Residential Rebates — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
  17. Nicor Gas Rebate FAQ — https://www.nicorgas.com/ways-to-save/residential-savings/rebates/rebate-faq.html (accessed 2026-09-16)
  18. Nicor Gas Multi-Family Savings — https://www.nicorgas.com/ways-to-save/multi-family-savings.html (accessed 2026-10-23)
  19. ComEd Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
  20. City of Geneva – Rebates & Incentives — https://www.geneva.il.us/1550/Rebates-Incentives (accessed 2026-09-16)
  21. City of St. Charles – Electric Utility — https://www.stcharlesil.gov/Services/Utilities/Electric-Utility (accessed 2026-09-16)
  22. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)