Authorized Briggs & Stratton Dealer · Will County, IL

Briggs & Stratton Generators in Will County, IL

Will County, home to 696,355 people at the 2020 Census across 849 square miles, is served from GSHA’s office at 11 N Skokie Hwy in Lake Bluff, the nearer of our two offices for every Will County community on this page. It is the far edge of our territory: straight-line distances run from about 42 miles for Bolingbrook to about 56 for Shorewood, so five of the eleven towns in our table fall inside our standard 50-mile radius and the rest, including Joliet, are quoted case by case rather than turned away. As an authorized Briggs & Stratton dealer and installer, GSHA handles the whole job with its own crews and licensed electricians.

Two Will County rules shape every generator we quote here. The county’s building ordinance requires basements and crawl spaces to drain to a sump pump, so the sump pump is always on the load list. And outside municipal limits, the county issues electrical permits only to a licensed and bonded electrical contractor who is registered with its Land Use Department, which is one reason homeowners there hire a full-service installer rather than piecing a job together.

Request a free installation estimateCall (224) 220-3660

Briggs & Stratton PowerProtect DX 22kW home standby generator, model 040780

Communities we serve in Will County

The table lists eleven of the largest municipalities wholly or mainly in Will County, with 2020 Census populations for the whole municipality and approximate straight-line distance from our Lake Bluff office. Towns beyond 50 miles are marked; we still quote them, case by case, after a phone call about your address.

City or villagePopulation (2020 Census)Distance from Lake BluffService note
Bolingbrook73,92241.7 miInside 50-mile radius; also in DuPage County
Romeoville39,86345.4 miInside 50-mile radius
Homer Glen24,54347.1 miInside 50-mile radius; also in Cook County
Plainfield44,76248.8 miInside 50-mile radius; also in Kendall County
Lockport26,09448.8 miInside 50-mile radius
Crest Hill20,45951.8 miQuoted case by case
Mokena19,88752.1 miQuoted case by case
New Lenox27,21453.3 miQuoted case by case
Joliet150,36253.5 miCounty seat area; quoted case by case
Frankfort20,29654.1 miQuoted case by case; also in Cook County
Shorewood18,18655.5 miQuoted case by case

Distances are approximate straight-line miles as measured for GSHA’s Will County generator page. Call (224) 220-3660 with your address and we will tell you what applies; see also our service area page.

Briggs & Stratton generator guidance for Will County homes

Every basement has a sump pump, so every generator carries one. Will County’s building ordinance (sec. 150.070) requires drain tile around any foundation that encloses below-grade space, connected to a sump pump that discharges to an approved drainage facility or at least ten feet from the house, and forbids tying footing drains or sump pumps to a sanitary sewer or septic system. A house built to that standard depends on its sump pump, and the pump stops during an outage unless it has backup power. That is the first circuit on every Will County estimate. The Briggs & Stratton PowerProtect DX 13kW, rated 13 kW on propane and 11.5 kW on natural gas with 37 kVA of motor-starting capability, carries the sump pump, furnace, refrigerator and lights in an upright cabinet 28.5 by 25.5 inches.

Local drainage flooding. The county’s Comprehensive Stormwater Management Plan describes two river basins, the Des Plaines (478 square miles within the county, with the DuPage River as a major tributary) and the Kankakee (368 square miles), and reports that in many parts of the county local drainage flooding is a bigger problem than river overbank flooding, with considerably more flood-prone area than the FIRM maps show. In practice that means a storm can fill a sump pit fast even on a lot that is nowhere near a mapped floodplain, so we never leave the sump pump off the generator, and we place the pad on the highest practical ground.

Wells beyond the service areas. The Will County Health Department’s Environmental Health Division permits and inspects private wells and septic systems, and the county’s land-use plan steers new development toward existing sewer and water service areas while preserving rural districts, so homes in the southern and eastern county are more likely to be on a well. A well pump is a motor with a high starting draw. Briggs & Stratton publishes motor-starting capability of 37 kVA on the DX 13kW, 45 kVA on the DX 22kW and 65.5 kVA on the DX 26kW, which lets us size against the pump before ordering.

Newer subdivisions and central air. Plainfield, Romeoville, Bolingbrook, Mokena and New Lenox include many newer homes with 200-amp service and one or two central air conditioners. The PowerProtect+ DX 18kW and 22kW models produce their full rating on Nicor natural gas, and Briggs & Stratton says every PowerProtect+ model is engineered to start a 5-ton air conditioner. For two AC systems, a 26kW model with a Symphony Choice Low Voltage Dual Module manages both without starting them together.

Monitoring from a distance. Because Will County is at the edge of our territory, EnergyTrak monitoring is worth considering here: it is built into PowerProtect+ generators, reports generator and utility status and service alerts by onboard cellular, and lets your dealer diagnose remotely before a technician makes the drive.

Permits, utilities and installation considerations

Unincorporated Will County

The Will County Building Ordinance, sec. 150.003, applies to buildings and equipment outside the limits of cities, villages and incorporated towns, and requires a permit in advance for any electrical installation or heating equipment installed, altered or converted there. Those permits come from the Will County Land Use Department, Development Services Division, Building Section, at 58 East Clinton Street, Suite 100, Joliet (815-727-8634), through the county’s SmartGov Public Portal. The county has adopted the 2018 International Residential Code, the 2017 National Electrical Code, the 2018 International Fuel Gas Code and the 2018 International Mechanical Code, with amendments in its 2021 Building Ordinance. The ordinance does not name standby generators, but sec. 150.110 requires a permit for all electrical work, requires copper wiring on the load side of the meter and EMT conduit throughout structures, and allows electrical permits only when a licensed and bonded electrical contractor is listed on the application. Since 1993, every contractor working in unincorporated Will County has had to register with the Land Use Department, carry insurance and post a $10,000 surety bond, with electrical contractors also filing a letter of intent for the property. We confirm the submittal list with the Building Section for each job.

Cities and villages

Inside Joliet, Bolingbrook, Plainfield, Romeoville and every other municipality, the city or village issues the generator permit under its own codes. GSHA files with whichever department covers your address and meets its inspectors.

Gas: Nicor Gas

Nicor Gas lists Will County among the counties it serves, and village guides such as New Lenox’s and Homer Glen’s name Nicor as the gas provider. A standby generator adds a large load to the meter: Briggs & Stratton publishes half-load natural-gas use of 194,000 BTU/hr for the 22kW models and 206,000 BTU/hr for the 26kW models, and full-load demand is higher. Our gas technicians check whether the Nicor meter and service line can carry the generator plus the furnace and water heater, and coordinate any meter upgrade with Nicor before the installation date. Homes outside Nicor’s lines can run any DX model on propane.

Electric: ComEd

ComEd delivers electricity in Will County. The county announced recovery resources on August 13, 2026 after storms, including the severe weather of August 11, caused damage and power outages in several communities. The Briggs & Stratton transfer switch senses the outage, starts the generator, moves your circuits over and isolates the house from ComEd’s lines, then transfers back automatically when power returns. Note that the county’s requirement for EMT conduit throughout structures applies to the transfer switch wiring in unincorporated homes.

Placement and cold weather

Briggs & Stratton approves its DX generators for installation as close as 18 inches to a building when NFPA 37 is followed and the home has working carbon monoxide detectors; we confirm local setbacks with the permitting authority at the estimate. On a septic lot we keep the pad and gas trench clear of the tank and field. Briggs & Stratton’s cold weather kits add a battery warmer and two oil heaters that switch on by thermostat, and we recommend them on every Will County installation.

Briggs & Stratton products we install in Will County

The same lineup is available across the county. Full specifications are on the main Briggs & Stratton page.

Briggs & Stratton PowerProtect DX 13kW home standby generator, model 040740

PowerProtect DX 13kW

Sump pump, well pump, furnace and refrigerator; the essential-circuit choice.

Explore the DX 13kW
Briggs & Stratton PowerProtect+ DX 18kW home standby generator, model 040760

PowerProtect+ DX 18kW

Engineered to start a 5-ton AC, with built-in EnergyTrak for remote monitoring.

Explore the 18kW
Briggs & Stratton PowerProtect DX 22kW home standby generator, model 040780

22kW DX and PowerProtect+ DX

Whole-house coverage for newer homes with 200-amp service and one AC.

Explore the 22kW models
Briggs & Stratton PowerProtect+ DX 26kW home standby generator, model 040810

26kW DX and PowerProtect+ DX

Two ACs, a well pump or an electric range; 26 kW on propane, 24 kW on natural gas.

Explore the 26kW models

Automatic Transfer Switches

Wired to the county’s copper-wire and EMT conduit requirements in unincorporated homes.

About transfer switches

Symphony Choice

Dual Module for two AC systems; 50 Amp Module for ranges and electric heat.

About Symphony Choice

EnergyTrak Monitoring

Remote status and dealer diagnostics, useful at the edge of our territory.

About EnergyTrak

Service & Repair

Maintenance and repair for current and older Briggs & Stratton units.

Explore repair

Current Briggs & Stratton offers

Ask GSHA about current Briggs & Stratton offers.

We confirm at the estimate which offer, if any, applies to your generator and purchase date. Financing through Synchrony and Service Finance is on our financing page.

Questions and answers

Do you serve my Will County town?

Bolingbrook, Romeoville, Homer Glen, Plainfield and Lockport are inside the standard 50-mile radius of our Lake Bluff office. Joliet, Crest Hill, Mokena, New Lenox, Frankfort and Shorewood are about 52 to 56 miles away and are quoted case by case. Call (224) 220-3660 with your address.

Do I need a permit in unincorporated Will County?

Yes. The county requires a permit in advance for electrical installations outside municipal limits and a permit for all electrical work, issued through the Land Use Department’s Building Section via the SmartGov portal. Electrical permits are issued only to a licensed and bonded electrical contractor registered with the county.

Will a Briggs & Stratton generator run my sump pump?

Yes, and in Will County it always should: the county ordinance requires basements and crawl spaces to drain to a sump pump. Even the DX 13kW is sized to carry it with the furnace, refrigerator and lights.

What about my well pump?

If you are on a private well, permitted by the Will County Health Department, the pump goes on the load list. We compare its starting requirement with Briggs & Stratton’s published motor-starting capability, 37 kVA on the DX 13kW up to 65.5 kVA on the DX 26kW.

Will Nicor need to upgrade my meter?

Sometimes. We check the meter and service line against the generator’s full-load demand on top of your existing gas appliances and arrange any upgrade with Nicor before installation day.

How do you handle service calls this far from your office?

We schedule maintenance visits ahead, and on PowerProtect+ generators the built-in EnergyTrak monitoring lets us see status and alerts remotely before sending a technician.

Do you repair older Briggs & Stratton generators?

Yes, including Fortress-series units. See our repair page and fault code guide.

Are there Briggs & Stratton offers in Will County?

Ask GSHA about current Briggs & Stratton offers; we confirm what applies at the estimate.

More Briggs & Stratton pages

Briggs & Stratton Authorized Dealer in Illinois (main page) · PowerProtect DX generators · Briggs & Stratton repair · Generator error codes · Generator installation

Other counties

Request a free Briggs & Stratton installation estimate

Tell us about your home and the generator you are considering in Will County. We will follow up to schedule a free, no-obligation in-home visit, count the loads you want covered, check the electrical service, gas meter and placement, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA advisor checks the panel, gas meter and lot and explains the Briggs & Stratton options that fit.

Written quote

You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing, water treatment and generator contractor and an authorized Briggs & Stratton dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Briggs & Stratton generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Briggs & Stratton residential standby generator lineup and DX / PowerProtect+ DX product pages — https://energy.briggsandstratton.com/en-us/products/residential-standby-generators (accessed 2026-10-23)
  2. PowerProtect DX 13kW product page — https://energy.briggsandstratton.com/en-us/products/powerprotect-dx-13kw-home-standby-generator (accessed 2026-10-23)
  3. Briggs & Stratton EnergyTrak generator monitoring — https://energy.briggsandstratton.com/en-us/residential/products/remote-monitoring/generator-monitoring (accessed 2026-10-23)
  4. Briggs & Stratton transfer switches and cold weather accessories — https://energy.briggsandstratton.com/en-us/residential/products/standby-generators/transfer-switches-and-accessories (accessed 2026-10-23)
  5. GSHA KOHLER Generator Installation in Will County (GSHA-verified county facts and distances) — https://gshaservices.com/electrician-near-me/whole-house-generator-installation/kohler-generators-installation-will-county/ (accessed 2026-10-23)
  6. Will County, Illinois (Wikipedia; 2020 Census) — https://en.wikipedia.org/wiki/Will_County,_Illinois (verified by GSHA 2026-09)
  7. Nicor Gas, Where We Are — https://www.nicorgas.com/company/where-we-are.html (verified by GSHA 2026-09)
  8. Village of New Lenox, Guide for New Residents — https://www.newlenox.net/292/Guide-for-New-Residents (verified by GSHA 2026-09)
  9. Village of Homer Glen, Utilities — https://www.homerglenil.org/2485/Utilities (verified by GSHA 2026-09)
  10. Will County Land Use Department, Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (verified by GSHA 2026-09)
  11. Will County Building Ordinance sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (verified by GSHA 2026-09)
  12. Will County Building Ordinance sec. 150.110 Electrical Requirements — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-48224 (verified by GSHA 2026-09)
  13. Will County Building Ordinance sec. 150.070 (drain tile and sump pumps) — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-48134 (verified by GSHA 2026-09)
  14. Will County Land Use Department contractor registration FAQ — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (verified by GSHA 2026-09)
  15. Will County Comprehensive Stormwater Management Plan (1998) — https://willcounty.gov/County-Offices/Economic-Development/Stormwater-Management-Planning-Committee/Plans-Projects/FileId/4021 (verified by GSHA 2026-09)
  16. Will County Health Department, Safe Water, Wells and Septic Systems — https://willcountyhealth.org/safe-water-wells-and-septic-systems/ (verified by GSHA 2026-09)
  17. Will County news release, August 13, 2026 — https://willcounty.gov/News/resources-available-for-will-county-residents-impacted-by-storms (verified by GSHA 2026-09)
  18. Will County Land Resources Management Plan excerpts (2002) — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Community-Development-Division/Long-Range-Planning/FileId/2025 (verified by GSHA 2026-09)
  19. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)