Mitsubishi Electric comfort. Local GSHA expertise.
Authorized Mitsubishi Electric Dealer in Northern Illinois
GSHA Services, LTD is an authorized Mitsubishi Electric dealer and installer with offices in Woodstock and Lake Bluff. Our own crews design, install and service residential heating and cooling systems from Mitsubishi Electric Trane HVAC US: wall-mounted, floor-mounted and ceiling-cassette ductless mini-splits, multi-zone systems, ducted air handlers, Hyper-Heating INVERTER (H2i) cold-climate heat pumps, intelli-HEAT dual-fuel systems that work with a gas furnace, Lossnay ventilation and the controls that run them. We serve homeowners in McHenry, Lake, Boone, Kane, DuPage, Cook and Will counties.
Every Mitsubishi Electric project starts with a free in-home estimate: a room-by-room load calculation, a walk around the house to find where the outdoor unit, refrigerant lines and condensate can run, a look at your electrical panel by our own licensed electricians, and a written quote for a system designed for the rooms you actually use. Request a free installation estimate or call (224) 220-3660.

Authorized Mitsubishi Electric DealerGSHA Services, LTD · Woodstock & Lake Bluff, IL
An authorized Mitsubishi Electric dealer with its own crews
What this page claims, and what it does not
GSHA is an authorized dealer and installer of Mitsubishi Electric residential heating and cooling equipment. Mitsubishi Electric Trane HVAC US also runs a Diamond Contractor program: it describes Diamond Contractors as independent contractors who have received advanced training directly from the company, and it says it extends its residential product warranty to 12 years for customers who choose a Diamond Contractor. Program status is shown on Mitsubishi’s own contractor search, so this page does not claim a program tier. If a particular credential or warranty term matters to you, ask, and we will show you the Mitsubishi warranty statement that applies to your installation before you sign anything.
Our own crews, our own licensed electricians
The people who measure your rooms, design the system, set the outdoor unit, run the refrigerant lines and commission the equipment work for GSHA. A ductless or ducted heat pump is as much an electrical job as a mechanical one: the dedicated circuit, the outdoor disconnect and any panel work are done by GSHA’s own licensed electricians under the same permit, so you are not coordinating a second contractor. Permits and inspections, start-up, setting up the controls and app, and the homeowner walkthrough are handled by the same team.
More than one brand, one honest recommendation
GSHA installs and services several heating and cooling brands, so a Mitsubishi Electric recommendation is made because it fits the house. Ductless and ducted Mitsubishi heat pumps are usually the strongest answer for additions, finished attics and basements, sunrooms, older homes without ductwork, rooms that never stay comfortable, and homeowners who want electric heat that keeps working in a northern Illinois winter. Where a gas furnace and central air conditioner is the better value, we will tell you that too.
Current Mitsubishi Electric offers
Ask GSHA about current Mitsubishi Electric offers.
Manufacturer promotions carry their own equipment lists, purchase and installation windows and claim rules, so we confirm what applies to your system and installation date at the estimate instead of publishing offer amounts here. Financing programs available through GSHA, including Synchrony and Service Finance, are on our financing page. See financing options.
Utility incentives depend on your utility, the equipment installed and the installation date. ComEd lists discounts for ducted and ductless mini-split heat pumps, with eligibility rules it sets and offers that can change; homes served by a municipal electric utility are outside ComEd’s programs. We check current eligibility with you during the estimate rather than promising an incentive up front.
Explore Mitsubishi Electric products
Eight categories GSHA designs, installs and services. Ratings shown are Mitsubishi Electric’s published figures from mitsubishicomfort.com (“up to” efficiency, “down to” sound); the rating of an installed system depends on the exact indoor and outdoor pairing, which we confirm in writing on your quote.

Wall-Mounted Ductless
The most common ductless indoor unit: a slim cabinet high on the wall that heats and cools one room or open area with no ductwork. Ideal for bedrooms, offices, additions and sunrooms, alone or as part of a multi-zone system.
Current line: MSZ-FX, MSZ-GX, MSZ-EX, MSZ-JX, MSZ-WX, MSZ-HX
Models and published figures
- MSZ-FX — described by Mitsubishi as its model with the “most features”
- MSZ-GX — described as “Wi-Fi enabled”
- MSZ-EX — offered in three color options
- MSZ-JX — Up to 20 SEER2 · down to 22 dB(A) · 9,000-12,000 BTU/H
- MSZ-WX — Up to 18 SEER2 · down to 22 dB(A) · 9,000-24,000 BTU/H
- MSZ-HX — Up to 20 SEER2 · down to 22 dB(A) · 9,000-24,000 BTU/H
Figures as listed on Mitsubishi’s wall-mounted products page. Cold-climate (H2i) performance depends on the outdoor unit the indoor unit is paired with; see the cold-climate section below.
Floor-Mounted
A low console that sits near the floor, often under a window or where a radiator or baseboard heater used to be. Mitsubishi describes the MFZ-KX as an energy-efficient, all-electric alternative to conventional baseboard heaters and radiators.
Featured: MFZ-KX
What Mitsubishi publishes
- MFZ-KX — described as a “whisper-quiet unit” and an all-electric alternative to baseboard heaters and radiators; the product page carries the ENERGY STAR mark
Mitsubishi publishes the MFZ-KX technical data through its professional documents library; GSHA quotes the capacity and rating of the exact pairing on your estimate.
Ceiling Cassettes
Recessed ceiling units that keep walls clear, useful in kitchens, finished basements and rooms with little wall space. Mitsubishi’s MLZ-KX is designed to fit between standard 16-inch ceiling joists; the SLZ-NL fits a 2-by-2-foot suspended ceiling grid.
Featured: MLZ-KX, SLZ-NL
Models and published figures
- MLZ-KX (EZ FIT ceiling-recessed) — Up to 20.9 SEER2 · down to 27 dB(A) · 6,000-18,000 BTU/H
- SLZ-NL (four-way ceiling-recessed cassette) — Up to 21 SEER2 · down to 25 dB(A) · 9,000-18,000 BTU/H
Figures as listed on Mitsubishi’s ceiling cassette page; the installed rating depends on the outdoor unit.
Ducted Air Handlers
Mitsubishi heat pumps that use ducts: multi-position air handlers for whole-home systems that use the existing ductwork, and low-static horizontal units that serve one or two rooms over a short duct run, hidden in an attic, soffit or crawl space.
Featured: SVZ-NL, PVA-NL, SEZ-NL
Models and published figures
- SVZ-NL (multi-position air handler; Mitsubishi positions it to replace a furnace or forced-air system using existing ductwork) — Up to 19.5 SEER2 · as low as 36 dB(A)
- PVA-NL (multi-position air handler for small spaces) — Up to 20.2 SEER2 · as low as 31 dB(A) · 12,000-60,000 BTU/H · built-in refrigerant leak sensor
- SEZ-NL (low-static horizontal-ducted, one or two rooms) — Up to 19.1 SEER2 · down to 23 dB(A) · 9,000-18,000 BTU/H
Figures as listed on Mitsubishi’s ducted solutions page. Duct condition and static pressure are checked before a ducted unit is quoted.
Multi-Zone Systems
One outdoor unit serving several rooms, each with its own indoor unit and its own temperature setting. Mitsubishi states that one multi-zone outdoor unit can connect to up to eight ductless or ducted indoor units, so wall, floor, cassette and ducted units can share one system.
Featured: MXZ multi-zone outdoor units, SMART MULTI H2i
What Mitsubishi publishes
- Multi-zone outdoor units — connect to up to eight ductless or ducted indoor units
- SMART MULTI H2i (single-phase 5-ton, announced April 2026) — 100% heating capacity at 5°F and 80% at -13°F; compatible with up to eight M- and P-Series indoor units
The number and size of zones is set by the load calculation, not by the maximum the outdoor unit allows.
intelli-HEAT Dual Fuel
A Mitsubishi heat pump coil installed on top of an existing gas furnace and connected to the existing ductwork. The heat pump cools in summer and heats most of the year; Mitsubishi’s intelligent switchover brings the furnace on when it is needed in extreme cold.
Featured: PAA-NL with P-Series or MXZ outdoor units
What Mitsubishi publishes
- PAA-NL (intelli-HEAT) — Up to 20 SEER2; connects to P-Series or MXZ outdoor units
- Works with a gas furnace and existing ductwork; Mitsubishi says it should only be connected to ANSI Z21.47/CSA 2.3 certified furnaces
- Offered in 18,000 to 42,000 BTU/H sizes
- Switchover can be set to favor efficiency or a lower carbon footprint
GSHA checks the furnace’s certification, age, blower and cabinet size before quoting intelli-HEAT.
Controls & Comfort App
The Comfort app by Mitsubishi Electric gives remote and local smartphone control of select Mitsubishi systems: modes, room temperatures, schedules and airflow. Wall controllers include the MHK2 wireless touchscreen controller and the Simple Direct Wired controller.
Featured: Comfort app, MHK2, Simple Direct Wired controller
What Mitsubishi publishes
- Comfort app — remote and local control; some systems have built-in Wi-Fi, others need a field-installed Wireless Interface Adapter
- MHK2 wireless controller — wall-mounted touchscreen, compatible with the Comfort app, room-by-room control
- Simple Direct Wired controller — full-color screen, 7-day programming with presets, Auto Dry setting that adjusts air conditioning to reduce humidity
Many existing owners know Mitsubishi’s earlier kumo cloud app. GSHA confirms which app and adapter your equipment supports and sets it up at start-up.
Lossnay Ventilation
The residential ducted Lossnay is a compact energy recovery ventilator (ERV) that brings in filtered outdoor air and exhausts stale indoor air while transferring heat and moisture between the two streams, so ventilation adds less load to the heating and cooling system.
Featured: Residential Ducted Lossnay ERV
What Mitsubishi publishes
- Airflow up to 110 CFM · as low as 23 dB(A)
- Standard MERV 10 filter, optional MERV 14
- Mitsubishi states it can “maintain up to 90% of the heat energy” in hot or cold climates
- Listed in the HVI Certified directory; optional CO2 sensor adjusts airflow automatically
Ventilation and filtration are comfort and building-performance measures; GSHA makes no health claims for them.
Choose a system
Most Mitsubishi Electric systems GSHA installs fall into one of five configurations. Which one fits depends on whether the house has usable ductwork, which rooms are the problem, whether you have gas service you want to keep, and how much of the house you want the heat pump to carry in January.
Single-zone ductless
One outdoor unit, one indoor unit, one room or open area. A small hole through the wall carries the refrigerant lines, the condensate drain and the control wire; there is no ductwork to build. This is the usual answer for a room over the garage, a sunroom, a finished attic, an addition the furnace never reached, a home office or a bedroom that is always too hot or too cold. The indoor unit can be wall-mounted, a floor console, a ceiling cassette or a short-run ducted unit hidden in a closet or soffit.
Multi-zone ductless or mixed
One outdoor unit connected to several indoor units, each with its own controller. Mitsubishi states a multi-zone outdoor unit can serve up to eight ductless or ducted indoor units, so a second floor can be served by wall units in the bedrooms and a ducted unit for the hallway and bath. Multi-zone suits older homes without ductwork (including homes heated by boilers and radiators that have no central air), whole-floor projects and houses where the owners want room-by-room control. The design question is sizing: every indoor unit should match its room’s load, because an oversized ductless unit short-cycles and does a poor job removing summer humidity.
Ducted Mitsubishi heat pump
A Mitsubishi outdoor unit paired with a multi-position air handler that uses the house’s ductwork. Mitsubishi positions the SVZ-NL to replace a furnace or forced-air system using the existing ducts, and the PVA-NL as a compact multi-position unit for small spaces. In an all-electric home, or a home where the owners are leaving gas behind, this is the whole-house replacement; electric backup heat in the air handler is sized at the estimate for the coldest nights.
intelli-HEAT dual fuel with your gas furnace
For a house that heats with natural gas and has a sound furnace, Mitsubishi’s intelli-HEAT puts a heat pump coil on top of the furnace and uses the existing ducts. The heat pump replaces the air conditioner for cooling and carries the heating through most of the season; the furnace comes on automatically in extreme cold. It keeps the security of gas heat while moving much of the heating to electricity, and Mitsubishi says the furnace must be ANSI Z21.47/CSA 2.3 certified, which GSHA confirms from the furnace’s rating plate before quoting.
Ductless supplement to a central system
Many northern Illinois homes keep their furnace and central air for most of the house and add a single-zone Mitsubishi system for the one space the ducts serve poorly. This is often the lowest-cost way to fix a comfort problem, and the existing equipment is left as it is.
Sizing and compatibility are determined for your home during the free estimate. GSHA runs a room-by-room load calculation, checks the ductwork if a ducted unit is being considered, confirms which indoor units, outdoor unit and controls work together, and quotes the pairing in writing with the efficiency and cold-climate rating that exact combination carries.
Hyper-Heating INVERTER (H2i) in a northern Illinois winter
The question homeowners ask most is whether a Mitsubishi heat pump will keep the house warm in January. Mitsubishi’s published claims for its Hyper-Heating INVERTER technology are specific. Its wall-mounted products page says its all-electric heat pumps with H2i perform at 100% of rated capacity in temperatures as low as 5°F, with continued operation down to -22°F. An October 2026 Mitsubishi article states 100% of rated capacity as low as 5°F with guaranteed operation down to -13°F, and says that H2i plus, available in select systems, raises 100% capacity down to -5°F. Its April 2026 SMART MULTI H2i announcement lists 100% heating capacity at 5°F and 80% at -13°F. The figures differ by system, which is exactly why the outdoor unit is chosen for your house rather than from a brochure.
What that means in practice: the City of Woodstock’s building code amendments set a 0°F winter design temperature for load calculations, and Chicago-area winters bring nights below that. GSHA calculates the heating load at design temperature, then chooses an H2i outdoor unit whose published capacity at low temperatures covers the rooms it serves. For a whole-home system we size backup heat (electric heat in an air handler, an intelli-HEAT gas furnace or the existing heating system) so the house stays comfortable on the coldest nights without oversizing the heat pump for the rest of the year.
Installation details matter more in cold weather than in summer. GSHA mounts outdoor units on a stand or wall bracket that keeps them clear of drifting snow, routes the defrost meltwater so it does not freeze on a walkway or driveway, keeps the unit away from roof drip lines, and confirms the refrigerant line length and lift are within the manufacturer’s installation limits.
Why the installation matters
A ductless system is precise equipment installed in a finished house, and two homes with the same Mitsubishi model can end up with very different comfort and electric bills. These are the steps GSHA performs on a Mitsubishi Electric installation.
- Room-by-room load calculation. Each indoor unit is sized to its room’s heating and cooling load, based on the room’s size, insulation, windows and exposure, not on a rule of thumb. Oversized ductless units short-cycle and leave rooms clammy in July; undersized units cannot keep up in a cold snap.
- Indoor unit placement. We place each indoor unit where its airflow reaches the room without blowing on a bed or a desk, where the condensate can drain by gravity or to a pump, and where the line set can run neatly, often through a closet, an exterior wall or the attic.
- Line sets and condensate. Refrigerant lines are sized, insulated, pressure-tested with nitrogen and evacuated with a vacuum pump before the refrigerant valves are opened. Exterior lines run in a line-set cover, and condensate lines are pitched and routed so they do not freeze or drip on a walkway.
- Outdoor unit location. The outdoor unit is set on a pad, stand or wall bracket above the snow line, with the clearances the installation manual requires, in a spot that satisfies your municipality’s setback and screening rules and keeps the unit away from a neighbor’s bedroom windows where the lot allows.
- Electrical. GSHA’s own licensed electricians install the dedicated circuit and outdoor disconnect, check the panel’s capacity, and handle any panel upgrade under the same permit.
- Controls and app. We install the wireless or wired controllers, connect any Wi-Fi adapter, set up the Comfort app with you and explain each mode, including Auto Dry where the controller offers it.
- Permits, commissioning and handoff. GSHA pulls the permit, schedules the inspection, runs the system in heating and cooling, confirms it performs as designed, walks you through filter cleaning and registers the equipment with Mitsubishi. Mitsubishi tells owners to register residential systems to get the best warranty, and its warranty statements differ by model and installation date.
Find your county
GSHA installs and services Mitsubishi Electric systems from two offices: Woodstock (McHenry County) and Lake Bluff (Lake County). Crews travel from those offices into Boone, Kane, DuPage, Cook and Will counties. Each county page covers the communities we serve there, local permit, placement and utility details for heat pumps and mini-splits, and how to get an estimate. The ZIP-code list is the definitive coverage map.
- McHenry County, ILWoodstock office
- Lake County, ILLake Bluff office
- Boone County, ILserved from Woodstock
- Kane County, ILserved from Woodstock and Lake Bluff
- DuPage County, ILserved from Woodstock and Lake Bluff
- Cook County, ILserved from Woodstock and Lake Bluff
- Will County, ILserved from Woodstock and Lake Bluff
Questions and answers
Is GSHA an authorized Mitsubishi Electric dealer?
Yes. GSHA Services, LTD is an authorized dealer and installer of Mitsubishi Electric residential heating and cooling equipment. Mitsubishi Electric Trane HVAC US also recognizes contractors through its Diamond Contractor program, and program status appears on Mitsubishi’s own contractor search; this page does not claim a program tier. Ask us which Mitsubishi warranty statement applies to your installation and we will show it to you with your quote.
Will a Mitsubishi heat pump heat my house in a northern Illinois winter?
A correctly sized Hyper-Heating INVERTER (H2i) system is designed for it. Mitsubishi states that H2i heat pumps deliver 100% of rated capacity at 5°F, and its published operating limits run from guaranteed operation down to -13°F to continued operation down to -22°F depending on the system; H2i plus systems hold 100% capacity lower still. GSHA sizes the system at the local winter design temperature and plans backup heat for whole-home systems, so the answer for your house comes from the load calculation.
Can a Mitsubishi system work with my existing gas furnace?
Yes, through intelli-HEAT. The PAA-NL coil sits on top of the furnace, uses the existing ductwork and connects to a P-Series or MXZ outdoor unit; the heat pump handles cooling and most heating, and the furnace takes over automatically in extreme cold. Mitsubishi requires an ANSI Z21.47/CSA 2.3 certified furnace, and GSHA also checks the furnace’s age and blower before recommending it.
Single-zone or multi-zone: which do I need?
Single-zone is one outdoor unit for one room or area and is the simplest, most efficient answer for one problem space. Multi-zone connects one outdoor unit to several indoor units (up to eight, per Mitsubishi) and suits a whole floor or a house without ducts. Where rooms have very different loads or schedules, two single-zone systems can be the better design; we show you both options when it matters.
Can a ducted Mitsubishi system replace my furnace and central air?
Often, yes. Mitsubishi positions the SVZ-NL multi-position air handler to replace a furnace or forced-air system using the existing ductwork, paired with an outdoor heat pump. We check the ducts, the return air and the electrical service first, and size backup heat for the coldest nights.
What is the Comfort app, and what happened to kumo cloud?
Mitsubishi’s current residential app page is for the Comfort app by Mitsubishi Electric, which gives remote and local smartphone control of select Mitsubishi systems. Many existing owners know the earlier kumo cloud app. Some indoor units have built-in Wi-Fi and others need a Wireless Interface Adapter, so GSHA confirms compatibility for your equipment and sets the app up at start-up.
Do I need a permit for a mini-split?
Usually. Most municipalities in our area require a permit for new heating and cooling equipment, and the outdoor unit must meet local setback and screening rules. GSHA pulls the permit, includes the equipment specification sheets and any plat of survey the municipality asks for, and schedules the inspection. Each county page lists what the municipalities we checked publish.
Are there utility incentives for a Mitsubishi heat pump?
ComEd lists Home Heating & Cooling Discounts for ducted, ductless mini-split and geothermal heat pumps, with eligibility requirements it sets and offers that can change. Nicor Gas’s 2026 residential rebates list no heat-pump rebate. Homes served by municipal electric utilities, such as Batavia, Geneva, St. Charles, Naperville or Winnetka, are outside ComEd’s programs. Check current eligibility with your utility; GSHA supplies the model numbers and invoice the application asks for.
Are there any Mitsubishi Electric offers right now?
Ask GSHA about current Mitsubishi Electric offers. Promotions name their own equipment and dates, so we confirm what applies to your system and installation date at the estimate. Financing options are on our financing page.
How is the Mitsubishi warranty handled?
GSHA registers your system with Mitsubishi after start-up and gives you the confirmation. Mitsubishi publishes separate warranty statements by product line and installation date on its warranty page, tells owners to register to get the best warranty, and offers a 12-year residential warranty when the installing contractor is a Diamond Contractor. We show you the statement that applies to the equipment on your quote.
How much does a Mitsubishi ductless system cost?
It depends on the number of zones, the indoor unit types, the outdoor unit and how hard the line-set route is. Published single-zone pricing is on our Mitsubishi ductless page; every job is a custom design confirmed by a free in-home estimate.
Do you service Mitsubishi systems you did not install?
Yes. GSHA cleans, maintains and repairs Mitsubishi Electric ductless and ducted systems regardless of who installed them, and we service other brands as well. Call (224) 220-3660 to schedule service.
More Mitsubishi and ductless pages
Mitsubishi ductless mini-split systems: prices and installation · Ductless systems · Best heat pumps for cold climates · Best ductless mini split brands for home additions · All products and brands
Request a free Mitsubishi Electric installation estimate
Tell us about your home and the rooms you want to heat and cool. We will follow up to schedule a free, no-obligation in-home visit, measure the load room by room, check where the outdoor unit and lines can go and look at your electrical panel, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA comfort advisor measures the rooms, checks the existing system and explains the Mitsubishi Electric options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing, water treatment and generator contractor and an authorized Mitsubishi Electric dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Mitsubishi Electric heat pumps and mini-splits across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Mitsubishi Electric Trane HVAC US — Wall-mounted products (MSZ-FX, GX, EX, JX, WX, HX; H2i capacity statement) — https://www.mitsubishicomfort.com/products/wall-mounted (accessed 2026-10-23)
- Mitsubishi Electric — MFZ-KX floor-mounted unit — https://www.mitsubishicomfort.com/products/m-series/mfz-kx (accessed 2026-10-23)
- Mitsubishi Electric — Ceiling cassettes (MLZ-KX, SLZ-NL) — https://www.mitsubishicomfort.com/products/ceiling-cassette (accessed 2026-10-23)
- Mitsubishi Electric — Ducted solutions (SVZ-NL, PVA-NL, SEZ-NL, PAA-NL; multi-zone up to eight indoor units) — https://www.mitsubishicomfort.com/products/ducted-solutions (accessed 2026-10-23)
- Mitsubishi Electric — SVZ-NL multi-position air handler — https://www.mitsubishicomfort.com/products/m-series/svz-nl (accessed 2026-10-23)
- Mitsubishi Electric — PVA-NL multi-position air handler — https://www.mitsubishicomfort.com/products/p-series/pva-nl (accessed 2026-10-23)
- Mitsubishi Electric — intelli-HEAT dual fuel system — https://www.mitsubishicomfort.com/intelli-heat (accessed 2026-10-23)
- Mitsubishi Electric — intelli-HEAT PAA-NL — https://www.mitsubishicomfort.com/products/p-series/paa-nl (accessed 2026-10-23)
- Mitsubishi Electric — Mythbusters: heat pumps for extreme cold climates (released Oct 19, 2026; H2i and H2i plus) — https://www.mitsubishicomfort.com/blog/mythbusters-heat-pumps-for-extreme-cold-climates (accessed 2026-10-23)
- Mitsubishi Electric Trane HVAC US — SMART MULTI single-phase 5-ton H2i outdoor unit announcement (Business Wire, April 9, 2026) — https://www.businesswire.com/news/home/20260409885548/en (accessed 2026-10-23)
- Mitsubishi Electric — PUZ Hyper-Heating INVERTER outdoor unit press release (P-Series, residential and light commercial) — https://www.mitsubishicomfort.com/press-releases/mitsubishi-electric-trane-hvac-us-introduces-the-2-ton-puz-hyper-heating-inverter-r-h2i-r-outdoor-unit (accessed 2026-10-23)
- Mitsubishi Electric — Comfort app — https://www.mitsubishicomfort.com/comfort-app (accessed 2026-10-23)
- Mitsubishi Electric — Smart controls (MHK2, Simple Direct Wired controller) — https://www.mitsubishicomfort.com/products/smart-controls (accessed 2026-10-23)
- Mitsubishi Electric — Residential Ducted Lossnay ERV — https://www.mitsubishicomfort.com/products/residential-lossnay (accessed 2026-10-23)
- Mitsubishi Electric — Get started / Diamond Contractors and 12-year warranty statement — https://www.mitsubishicomfort.com/get-started (accessed 2026-10-23)
- Mitsubishi Electric — Warranty statements — https://www.mitsubishicomfort.com/warranty (accessed 2026-10-23)
- Mitsubishi Electric — Register your product — https://www.mitsubishicomfort.com/register-your-product (accessed 2026-10-23)
- City of Woodstock City Code Title 7 Chapter 1 Building Code (IRC amendments; 0 F winter design temperature) — https://codelibrary.amlegal.com/codes/woodstockil/latest/woodstock_il/0-0-0-13901 (accessed 2026-09-16)
- ComEd — Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
- Nicor Gas — Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
- American Public Power Association — Public Power in Illinois (municipal electric utilities) — https://www.publicpower.org/public-power-illinois (accessed 2026-09-16)
- GSHA Services — Mitsubishi ductless mini-split systems prices and installation — https://gshaservices.com/ductless-mini-split-systems/mitsubishi-ductless/ (accessed 2026-10-23)
- GSHA Services — Service area (ZIP list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA Services — Financing — https://gshaservices.com/financing/ (accessed 2026-10-23)
