Authorized Bradford White dealer · Cook County, IL
Authorized Bradford White Dealer Serving Cook County, IL
In Cook County, GSHA Services, LTD installs and services Bradford White water heaters as an authorized dealer across the north, northwest and near-west suburbs, and in Tinley Park and Lemont. GSHA has no Cook County office; the Lake Bluff office in Lake County sends crews to most Cook County jobs, and the Woodstock office covers the far northwest corner. Every Bradford White job includes sizing, removal of the old water heater, gas piping or the electrical circuit, venting or chimney work, the relief valve and expansion tank, the municipal permit and inspection, and start-up, with electrical work by GSHA’s own licensed electricians.
No county we serve has older housing. In the Census Bureau’s ACS 2020-2024 estimates, Cook County’s median home dates from 1961, roughly 28 percent of housing units were built in 1939 or earlier, and roughly 73 percent before 1980. About 80 percent of occupied homes heat with natural gas, about 16 percent with electricity and about 1.5 percent with propane, and over half of all housing units sit in buildings with two or more units. That makes water heater work here a mix of old basements with tired chimneys and condos or townhomes where the water heater lives in a closet.

Communities we serve in Cook County
Our published Cook County ZIP coverage falls into four groups. Northwest: Arlington Heights, Elk Grove Village, Hoffman Estates, Mount Prospect, Palatine, Prospect Heights, Rolling Meadows, Schaumburg, Streamwood and Wheeling, plus Des Plaines and Park Ridge. North: Glencoe, Glenview, Golf, Kenilworth, Morton Grove, Northbrook, Skokie, Wilmette and Winnetka. Near west: Berkeley, Broadview, Franklin Park, Hillside, Melrose Park, River Grove, Schiller Park and Westchester. South: Lemont and Tinley Park.
A few of these towns spill into neighboring counties: Palatine, Barrington and Buffalo Grove into Lake, Schaumburg and Hanover Park into DuPage, Bartlett into DuPage and Kane, Lemont into DuPage and Will, and Tinley Park into Will. That affects which office issues the permit, not when we can come out. Only some City of Chicago ZIP codes are on the ZIP list; we have done work at Chicago addresses, but each one is confirmed individually, and the same goes for Cicero, Berwyn, Matteson and Richton Park. If your ZIP is not on the service area page, call (224) 220-3660.
Bradford White water heater guidance for Cook County homes
Old basements, old chimneys. In pre-war houses in Park Ridge, Wilmette, Winnetka, Glencoe, Kenilworth, Skokie and the near-west suburbs, the gas water heater often vents into a masonry chimney that also served a boiler or an old furnace for decades. A new Bradford White atmospheric RG2 can go back on that chimney only if the flue drafts properly for what remains on it, so we inspect it and quote a liner when needed. Where the chimney is in poor shape or the furnace now vents through PVC, a Bradford White power vent tank (the RG2PV40S6N and RG2PV50S6N are rated 0.72 UEF) vents through a side wall and lets the chimney be retired.
Condos, townhomes and closet installations. Many Cook County owners replace a tank in a utility closet. Palatine’s water heater handout shows how much the closet matters: a replacement heater in a confined space needs two 100-square-inch ventilation openings, and new installations are prohibited inside a storage closet. For a gas tank in a tight space, a Bradford White direct vent RG2DV, which draws combustion air from outdoors through its vent kit, or a power direct vent RG2PDV can solve the air problem, but both need an exterior wall the association will let us penetrate. In all-electric units, Bradford White’s upright and lowboy electric tanks fit where gas cannot; an AeroTherm heat pump water heater needs more air around it and a condensate drain, so it suits a basement or larger utility room better than a small closet.
Hot water across a long, narrow house. Older Cook County homes often run the hot-water line a long way from a front basement to a rear second-floor bath. Bradford White’s Infiniti GR condensing tankless unit adds a built-in recirculation pump and a dedicated recirculation connection to the GS design, so hot water can be ready at the far fixture; the Infiniti GS 199 itself delivers 5.8 GPM at a 67°F rise. Both need PVC venting (2-inch up to 60 feet or 3-inch up to 150 feet) and a gas line able to supply up to 199,000 BTU/h, which we check before quoting.
Radiator homes and indirect tanks. Nearly half of Cook County’s housing was built before 1960, and hot-water radiator systems are common in the older suburbs. In those homes a Bradford White PowerStor indirect tank, heated by the boiler through an internal coil, replaces a separate gas tank and its chimney connection. Peoples Gas and North Shore Gas list an indirect water heater paired with a condensing, modulating hot-water boiler of at least 88% AFUE as a 2026 rebate measure when it replaces a standard atmospheric tank, and Bradford White’s Brute FT wall-hung boilers are rated 95% AFUE. Steam systems are a different case that GSHA evaluates on site.
Northwest suburban single-family homes. Arlington Heights, Palatine, Mount Prospect, Schaumburg and Hoffman Estates are full of houses built between the 1960s and the 1980s, most with a basement gas tank sharing a flue with the furnace. A new RG2 atmospheric tank, a power vent tank or an Infiniti tankless unit all fit, and in a Nicor Gas suburb the choice rests on performance and venting rather than a gas rebate, because Nicor’s 2026 water heater measures do not fit current Bradford White gas models.
Permits, utilities and installation considerations
Water heater permits
Almost all of suburban Cook County is incorporated, so the village or city issues the water heater permit; the county’s Department of Building and Zoning handles only unincorporated parcels and does not process permits for Chicago or incorporated suburbs (e-Permits). GSHA files the application with the plumber’s letter of intent and the Bradford White spec sheet, and is there for the inspection.
- Palatine. The village’s permit page names “replacing or installing an air conditioning, heating unit or water heater” as permitted work. Under its 2026 Water Heater Replacement handout, the job is an online Express permit and must follow the manufacturer’s instructions and the Illinois State Plumbing Code. The handout’s checklist includes a full-port cold-water shut-off, dielectric unions where metals change, lead-free solder, rigid Type L copper rather than flexible connectors, a full-size relief valve discharge that ends within 6 inches of the floor, a heat trap, bonding, and an 18-inch platform for a gas heater in a garage. A tankless application adds a diagram of the heater and floor drain; the plumber registers with the village and files a letter of intent, and review can take five days. When a household has no hot water, work may begin as long as the permit application follows within one business day.
- Arlington Heights. Water heater replacement and boiler replacement are both on the village’s over-the-counter permit list, filed through Civic Access.
- Des Plaines and Park Ridge. Des Plaines accepts applications in its Customer Self Service portal (Building and Permits); Park Ridge books inspections one to two working days out (Permits and Inspections). We confirm each city’s water heater paperwork at filing.
- Unincorporated Cook County permits through the County’s Department of Building and Zoning.
Venting in older and multi-unit buildings
Atmospheric tanks need a chimney or B-vent that drafts properly; power vent, direct vent and Infiniti units need an exterior termination with clearances from windows, doors, neighboring buildings and, in some suburbs, the side-yard line. In a condo, that termination may require association approval. When a combi or boiler change leaves the water heater as the only appliance on a masonry chimney, or the other way around, the remaining appliance’s flue is checked; Peoples Gas and North Shore Gas already require a chimney liner when a high-efficiency furnace orphans a water heater, and GSHA applies the same check to any change.
Utilities and rebates
Which rebate rules apply comes down to the gas company named on your bill. Most of the Cook suburbs we serve are Nicor Gas; Chicago is Peoples Gas; Winnetka and the towns north of it are North Shore Gas, and along that stretch we confirm from the bill. Electricity is ComEd throughout, except in Winnetka, which runs a village electric department. The 2026 rules:
- Peoples Gas and North Shore Gas share one HVAC and Water Heating application: the existing heater must be a standard-efficiency, standalone, atmospherically vented tank, and the new one a power-vented tankless of 0.95 UEF or higher (Bradford White rates the Infiniti GS and GR at a maximum 0.98 UEF) or an indirect tank paired with a condensing, modulating boiler of at least 88% AFUE. Applications are due within 30 days of installation or by December 31, 2026, with the AHRI certificate.
- Nicor Gas (2026 rebates) requires at least 0.86 UEF on a power-vented or condensing storage tank and limits tankless units to 75 MBTUH or less, which excludes current Bradford White gas models.
- ComEd lists heat pump water heaters in its Home Heating & Cooling Discounts; Winnetka residents should ask the village electric department instead.
Check current eligibility with your utility, and ask GSHA which programs your equipment qualifies for.
What GSHA handles
The installation details Palatine spells out are a good checklist anywhere in the county: a full-port cold-water shut-off, dielectric connections, rigid piping where required, a relief valve discharge to within 6 inches of the floor, heat traps, bonding, and a raised platform for a gas water heater in a garage. GSHA also handles the gas piping and shut-off, venting or liner work, the expansion tank, the electrical connection by our own licensed electricians, the permit and inspection, and start-up. Financing is described on GSHA’s financing page.
Recent GSHA work in Cook County
Recent GSHA jobs in Cook County include work in Arlington Heights, Des Plaines, Glenview, Hoffman Estates, Mount Prospect, Palatine, Schaumburg and Wheeling, plus Barrington and Bartlett at the county line. Chicago addresses and suburbs not on the ZIP list are taken case by case after we confirm the address.
Bradford White products we install in Cook County
The same Bradford White lineup is available county-wide. Featured models, ratings and links are on the main Bradford White dealer page.
Atmospheric vent gas tanks
The classic Bradford White gas tank: vents into an existing chimney or B-vent, with the Defender Safety System, ICON System gas control and Hydrojet sediment reduction.
Featured: RG240T6N, RG250T6N, RG250S6N, RG250H6N, RG275H6N
See the RG2 atmospheric vent tank
Power vent and direct vent gas tanks
For homes where the chimney is going away: a blower vents the tank sideways through the wall or up through the roof, or a direct vent kit draws outside air.
Featured: RG2PV40S6N, RG2PV50S6N, RG2PV50H6N, RG2PV75H6N, RG2DV50S6N, RG2PDV50S6N
See the power vent tankHigh Efficiency eF Series
Bradford White’s highest-efficiency residential gas tank: a vertical dual-pass heat exchanger, power venting and a built-in condensate tee.
Featured: RC2PV50H6N, RC2PDV50H6N
Explore Bradford White gas tanks
AeroTherm heat pump water heaters
ENERGY STAR certified hybrid electric water heaters that pull heat from the surrounding air, rated up to 4.20 UEF.
Featured: RE2HP5010, RE2HP6510, RE2HP8010
See the AeroTherm heat pumpElectric tank water heaters
Upright, lowboy and utility electric tanks for homes without gas, with Vitraglas lining and the Hydrojet system.
Featured: RE240S6, RE250S6, RE250T6, RE350S6, RE240L6, RE120U6
Explore Bradford White electric
Infiniti tankless water heaters
Condensing gas tankless with stainless steel heat exchangers, up to 0.98 UEF; the GR adds a built-in recirculation pump.
Featured: RTG-S-150, RTG-S-199, RTG-R-150, RTG-R-199, RTG-K-160
See Infiniti tanklessPowerStor indirect water heaters
Storage tanks heated by your boiler through an internal coil, with a limited lifetime tank and heat exchanger warranty.
Featured: SW-2-40R-L, SW-2-50R-L, SW-2-80-L, DW-2-50L, SS-50-L
Boiler and indirect installationBrute boilers and combi-boilers
Bradford White’s Brute FT wall-hung boilers and combination boilers: 95% AFUE condensing, natural gas or propane.
Featured: BMFTHW-100/140/199, BMFTCW-140/199, BFTCF-199
Boiler installationCurrent Bradford White offers
Ask GSHA about current Bradford White offers.
Manufacturer offers change during the year and each names its qualifying models and dates, so tell us your planned installation date and we will say which offer, if any, applies. Financing through Synchrony and Service Finance is described on our financing page.
Utility rebates are separate from any Bradford White offer and depend on your utility, the exact model and the installation date; we check current eligibility with you at the estimate rather than promising a rebate up front.
Questions and answers
Will you install a Bradford White water heater at a Chicago address?
Possibly. Only some Chicago ZIP codes are on our published list, so each city address is confirmed individually, although we have worked in the city before. Call (224) 220-3660 with your address.
What does Palatine require for a water heater permit?
An online Express permit, a plumber registered with the Village with a letter of intent, and a final inspection. The handout lists installation details such as a full-port cold-water shut-off, rigid Type L copper, a relief discharge within 6 inches of the floor and an 18-inch raise for a gas heater in a garage; a tankless heater needs a diagram showing the heater and floor drain.
Is a water heater replacement an over-the-counter permit in Arlington Heights?
Yes. Arlington Heights lists water heater replacement and boiler replacement among its over-the-counter permits through the Civic Access portal.
Can you replace the water heater in my condo closet?
Usually. The questions are combustion air, venting and association approval. Palatine, for example, requires two 100-square-inch openings for a heater in a confined space and prohibits new installations inside a storage closet. Direct vent and electric Bradford White models are often the answer; we check the building, the association rules and the local code before quoting.
Does a Bradford White Infiniti qualify for a Peoples Gas or North Shore Gas rebate?
It can, if it replaces a standard atmospheric tank: the 2026 application accepts a power-vented tankless of 0.95 UEF or higher, and Bradford White rates the Infiniti GS and GR at a maximum 0.98 UEF. File within 30 days of installation with the AHRI certificate GSHA provides.
And in a Nicor Gas suburb?
Nicor’s 2026 storage measure requires at least 0.86 UEF and its tankless measure is limited to 75 MBTUH, so current Bradford White gas models do not fit them. Check current eligibility with Nicor Gas.
Our house has radiators. Can the boiler make our hot water?
On a hot-water system, yes, with a PowerStor indirect tank heated by the boiler. If the boiler is also due, a Brute FT wall-hung boiler or combination boiler can be part of the plan. Steam systems need a different approach, which GSHA evaluates on site.
Do you service Bradford White water heaters installed by others?
Yes. GSHA repairs and maintains Bradford White tanks, heat pump water heaters and tankless units from any installer. Call (224) 220-3660.
More Bradford White pages
Bradford White Authorized Dealer in Illinois (main page) · Bradford White water heaters · AeroTherm heat pump water heater · Infiniti tankless · Water heater services · Water heater replacement
Other counties
Request a free Bradford White installation estimate
Tell us about your home and the water heater you are considering in Cook County. We will follow up to schedule a free, no-obligation in-home visit, size the unit, check the existing gas, venting, water and electrical, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA comfort advisor checks the existing water heater, venting and gas or electric supply and explains the Bradford White options that fit.
Written quote
You receive an itemized quote with the equipment, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Bradford White dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Bradford White water heaters across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · Water heater services · All products and brands
Sources
- Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Cook County (05000US17031) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17031 (accessed 2026-10-23, via GSHA Navien Cook County page)
- Share of Cook County housing units in multi-unit buildings, as cited on the GSHA Lennox Cook County page — https://gshaservices.com/lennox/cook-county-il/ (accessed 2026-10-23)
- Bradford White – Residential Gas Water Heaters (model lines and features) — https://www.bradfordwhite.com/gas-water-heaters/ (accessed 2026-10-23)
- Bradford White – Heat Pump Water Heaters (AeroTherm Series) — https://www.bradfordwhite.com/heat-pump-water-heaters/ (accessed 2026-10-23)
- Bradford White – Tankless Water Heaters (Infiniti) — https://www.bradfordwhite.com/tankless-water-heater/ (accessed 2026-10-23)
- Bradford White – Electric Water Heaters — https://www.bradfordwhite.com/electric-water-heater/ (accessed 2026-10-23)
- Bradford White – Indirect Water Heaters (PowerStor Series) — https://www.bradfordwhite.com/indirect-water-heaters/ (accessed 2026-10-23)
- Bradford White – Home Heating (Brute boilers and combination boilers) — https://www.bradfordwhite.com/home-heating/ (accessed 2026-10-23)
- Bradford White spec sheet 1101 – Atmospheric Vent Gas (RG2 models, input, first hour rating, UEF, warranty) — https://docs.bradfordwhite.com/Spec_Sheets/1101_Current.pdf (accessed 2026-10-23)
- Bradford White spec sheet 1261 – Power Vent Gas (RG1PV/RG2PV models) — https://docs.bradfordwhite.com/Spec_Sheets/1261_Current.pdf (accessed 2026-10-23)
- Bradford White spec sheet 1105 – Direct Vent Gas (RG2DV models) — https://docs.bradfordwhite.com/Spec_Sheets/1105_Current.pdf (accessed 2026-10-23)
- Bradford White spec sheet 1903 – AeroTherm Series G2 (UEF, first hour rating, operating air range, electrical) — https://docs.bradfordwhite.com/Spec_Sheets/1903_Current.pdf (accessed 2026-10-23)
- Bradford White spec sheet 1155 – Infiniti GS (input, flow rates, gas pipe and vent limits, warranty) — https://docs.bradfordwhite.com/Spec_Sheets/1155_Current.pdf (accessed 2026-10-23)
- Bradford White spec sheet 1156 – Infiniti GR with built-in recirculation — https://docs.bradfordwhite.com/Spec_Sheets/1156_Current.pdf (accessed 2026-10-23)
- Bradford White spec sheet 554 – PowerStor Series Single Wall Indirect (SW-2) — https://docs.bradfordwhite.com/Spec_Sheets/554_Current.pdf (accessed 2026-10-23)
- Bradford White For The Pro – Brute FT Wall-Hung Combination Boilers (BMFTCW) — https://forthepro.bradfordwhite.com/our-products/usa-residential-boilers/brute-ft-wall-hung-combination-boilers-bmftcw (accessed 2026-10-23)
- Village of Palatine – When a Building Permit is Required — https://www.palatine.il.us/621/When-a-Building-Permit-is-Required (accessed 2026-10-23, via GSHA Navien Cook County page)
- Village of Palatine – 2026 Water Heater Replacement handout — https://www.palatine.il.us/DocumentCenter/View/721/Water-Heater-Replacement-PDF (accessed 2026-10-23, via GSHA Navien Cook County page)
- Village of Palatine – Express Building Permits — https://www.palatine.il.us/609/Express-Building-Permits (accessed 2026-10-23, via GSHA Navien Cook County page)
- Village of Arlington Heights – Over the Counter Permits — https://www.vah.com/over_the_counter_permits/index.php (accessed 2026-10-23, via GSHA Navien Cook County page)
- City of Des Plaines – Building and Permits — https://www.desplainesil.gov/Departments/Community-and-Economic-Development/Building-and-Permits (accessed 2026-09-16)
- City of Park Ridge – Permits and Inspections — https://www.parkridge.us/your_government/city_departments/permits_and_inspections_2.php (accessed 2026-10-23, via GSHA Navien Cook County page)
- Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (accessed 2026-09-16)
- Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (accessed 2026-09-16)
- Peoples Gas / North Shore Gas HVAC and Water Heating Application 2026 — https://www.peoplesgasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23)
- North Shore Gas HVAC and Water Heating Application 2026 — https://www.northshoregasdelivery.com/savings/pdf/residential_hvac.pdf (accessed 2026-10-23, via GSHA Navien Lake County page)
- Nicor Gas Residential Energy Efficiency Rebates 2026 (tankless and storage water heater measures) — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
- ComEd Home Heating & Cooling Discounts (heat pump water heaters listed) — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16, via GSHA Lennox county pages)
- GSHA Bradford White water heaters page — https://gshaservices.com/plumbing-services/water-heaters-services/bradford-white-water-heaters-prices/ (accessed 2026-10-23)
- GSHA Water Heater Services — https://gshaservices.com/plumbing-services/water-heaters-services/ (accessed 2026-10-23)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
- GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)
