Authorized MagicPak Dealer · Will County, IL
MagicPak Dealer Serving Will County, IL
GSHA Services, LTD is an authorized MagicPak dealer and installer serving Will County condominium and townhome owners, landlords and associations from Joliet and Plainfield to New Lenox, Bolingbrook and Romeoville. We have no office in Will County: estimators, installation crews and our own licensed electricians are dispatched from our Woodstock and Lake Bluff offices. On a MagicPak job we measure the closet and wall opening, supply and install the unit, reconnect the gas line or circuit, set the vent and condensate drain, register with the municipality where required, pull the permit and start the system up.
Will County is the youngest housing stock we serve, with a median build year of 1992, and its multi-unit homes lean toward townhomes: about 28,900 units (11.4 percent of roughly 254,300) are single-family attached homes, and about 32,800 (12.9 percent) are in buildings with two or more homes (U.S. Census Bureau, American Community Survey 2020-2024). Many of those buildings are only now reaching their first equipment replacement, which is when questions about the wall opening, the louver and the association’s rules first come up.

Communities we serve in Will County
GSHA’s published service-area list includes Joliet, the county seat; New Lenox, Crest Hill and Romeoville; Plainfield, partly in Kendall County; Bolingbrook, shared with DuPage; and Channahon, which extends into Grundy County. Naperville, Aurora, Lemont and Tinley Park are mostly outside Will County but include Will County neighborhoods. In a cross-county town, the building department and, in Naperville, the electric utility depend on which side of the line the building sits.
Lockport and Frankfort are also on the published ZIP list, but Crete is not; if your building is there or elsewhere in southern Will County, please confirm your address at (224) 220-3660 before scheduling. The complete list is on the GSHA service area page.
Multi-unit housing in Will County
The Census units-in-structure table counts every housing unit, occupied or not. It does not say which buildings use MagicPak units; it shows the kinds of buildings where all-in-one units are likely.
| Type of structure | Housing units | Share |
|---|---|---|
| One unit, detached | 189,298 | 74.4% |
| One unit, attached (townhomes, rowhouses) | 28,912 | 11.4% |
| Buildings with 2 to 4 units | 11,960 | 4.7% |
| Buildings with 5 to 19 units | 12,339 | 4.9% |
| Buildings with 20 or more units | 8,460 | 3.3% |
Source: U.S. Census Bureau, ACS 2020-2024 5-year estimates, table B25024, Will County. Mobile homes and other types make up the remainder.
Attached homes and small to mid-sized buildings make up most of the county’s multi-unit housing; large buildings are relatively few. On fuel, Will County is the most gas-heated county we serve: about 87.9 percent of occupied homes heat with utility gas, 9.3 percent with electricity and 2.0 percent with bottled or LP gas (ACS 2020-2024, table B25040). For through-the-wall units that usually means a gas MagicPak, but we confirm what each unit actually uses before quoting.
MagicPak guidance for Will County homes
Gas units on Nicor. Nicor Gas serves the Will County communities we checked. For a gas-fed closet unit, MagicPak’s MGE9 (95% AFUE, up to 11.7 SEER2, 20,000 to 50,000 BTU/h input) and MGE8 (80% AFUE, up to 13.4 SEER2, 15,000 to 60,000 BTU/h) are the current M-Series options. The MGE9’s FreezeShield circulates flue gas to keep condensate from freezing, and its telescoping flue adjusts for wall thickness. New Lenox asks that any change to the venting be described on the permit application, so if a move from an 80% unit to the condensing MGE9 changes the vent, we say so up front.
Electric units. For the smaller share of all-electric units, the MHP heat pump (0.75 to 3.0 tons, up to 13.4 SEER2 and 6.7 HSPF2, 3 to 10 kW electric heat) and the MCE (0 to 10 kW electric heat, up to 13.4 SEER2) are the choices. Naperville Electric customers in the Will County part of Naperville buy power from the city rather than ComEd, which affects incentives but not the unit.
Thermostats. New Lenox requires a programmable thermostat with a furnace installation. A MagicPak includes gas heat, so we include a compatible programmable thermostat in New Lenox quotes where the existing one does not qualify.
Electrical details. New Lenox calls for liquid-tight flexible metallic conduit outdoors and a breaker no larger than the equipment label allows, and Lockport requires wiring by a licensed electrician. GSHA’s own licensed electricians do the electrical work on every job and size the breaker to the new MagicPak nameplate.
When your building reaches its first replacement
Because so much of Will County’s multi-unit housing was built in the 1990s and 2000s, many owners are replacing the unit the builder installed. That first replacement raises questions that later ones do not:
- Who decides. Your declaration, bylaws and rules decide whether the unit, the wall and the louver belong to you or are common or limited common elements, and what approval you need. Read them, or ask the board or manager, before choosing a model.
- Setting the standard. The first few owners to replace often set the pattern for the building: model family, louver finish and how the opening is finished. Associations sometimes adopt a standard at this point to keep the facade consistent.
- Builder-era details. We check the original sleeve, louver, vent termination, condensate route and circuit, because builder installations vary and some details only show when the old unit comes out.
- Same opening if possible. Reusing the existing opening avoids exterior changes. Whether a current MagicPak fits depends on the original equipment; we check current MagicPak literature at the estimate and state the answer in the quote.
- Documentation. GSHA provides the specification sheet, louver finish, our certificate of insurance and a copy of the permit, and records the model and serial number for your files.
Paperwork GSHA prepares for a Will County MagicPak job
For the municipality
- MagicPak manufacturer specifications for the model being installed (New Lenox and Lockport ask for spec sheets)
- A description of any change to the venting (New Lenox)
- Contractor registration with the village, city or county where required (New Lenox, Lockport, Joliet, unincorporated Will County)
- Certificate of insurance, letter of intent and HVAC contractor license documentation (Joliet)
- Inspection scheduling and attendance
For you and your association
- A written quote naming the MagicPak model, size and louver finish
- A plain statement of whether the existing opening, sleeve and louver are reused
- GSHA’s certificate of insurance for the management company
- The permit and final inspection result
- The model and serial number, and MagicPak’s warranty terms, for your records
Looking after a newer MagicPak
In a county where many buildings are on their first or second unit, good maintenance can push the next replacement further out. Change the filter on schedule; MagicPak lists toolless filter access on its current M-Series gas units. Keep the closet clear so air can reach the return. Watch for water around the base of the cabinet, which usually points to a blocked condensate trap or drain. Keep the outside of the louver free of debris where your association allows owners to reach it. And book an annual check of the burner, heat exchanger, blower, controls and electrical connections; GSHA schedules maintenance visits in Will County from our Woodstock and Lake Bluff offices and can group several units in one building into one trip.
Permits, utilities and installation considerations
Permits by municipality
In Will County the contractor pulls the permit and the municipality inspects. GSHA handles the application, spec sheets, contractor registration and inspection:
- New Lenox. The Miscellaneous Permits Guide requires a permit for air conditioning units and furnaces, submitted with the manufacturer’s specifications, whether the unit is a direct replacement or a high-efficiency upgrade, and any change to the venting; it requires a programmable thermostat with a furnace and a final inspection, and asks three to five working days. Contractors must register with the village.
- Lockport. The building permit FAQ requires permits for mechanical-system replacements, treats HVAC as an over-the-counter permit and makes the property owner responsible for seeing that one is obtained; the HVAC Replacement application asks for spec sheets and wiring by a licensed electrician.
- Joliet. The building code page requires contractor registration, a certificate of insurance, a per-project letter of intent and a Joliet-accepted HVAC contractor license; the contractor, not the homeowner, must pull the permit, and permits are not issued over the counter (residential permit information).
- Plainfield. Permits go through the Permitting & Licensing Portal; the pages do not spell out the replacement rule, so GSHA confirms it with the Building Department.
- Unincorporated Will County. Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment and electrical installations, with an emergency-repair exception if the permit is applied for the next business day, through the Land Use Department Building Section.
- Other municipalities (Bolingbrook, Romeoville, Crest Hill, Channahon and others) have their own building departments; GSHA confirms the requirement before scheduling.
None of these pages addresses through-the-wall packaged units separately, so GSHA files a MagicPak as a heating and cooling replacement. Plainfield’s and Lockport’s yard rules for air conditioning equipment govern outdoor condensers; a MagicPak has no outdoor unit, so the louver and vent on the wall are what matter.
Utilities and incentives
Nicor Gas’s service territory names Will County communities including Aurora, Bolingbrook, Channahon, Crest Hill and Joliet; a ZIP lookup on nicorgas.com is the definitive check. ComEd delivers electricity in most of the county, but most of Naperville, including its Will County portion, is served by the city’s municipally owned electric utility. Nicor’s residential rebates tier furnace rebates at 95 and 97 percent AFUE and list no air conditioner or heat pump rebate; whether a gas packaged unit such as the MGE9 qualifies as a furnace is set by Nicor’s equipment rules, so we check. Rental owners with three or more units can look at Nicor’s Multi-Family Savings program. ComEd’s heating and cooling discounts cover heat pumps under eligibility rules that change. Check current eligibility with Nicor Gas and your electric utility.
Gas, electrical and condensate
A gas MagicPak needs a gas line sized for its input; GSHA sizes and reconnects the piping, and meter questions go to Nicor Gas. Our licensed electricians install the circuit, breaker and disconnect to the nameplate and to your town’s rules. We confirm the condensate drain in the closet and wall, which matters most for a condensing MGE9 in winter.
MagicPak products we install in Will County
The full MagicPak line is available county-wide. Specs are on the main MagicPak page.

MGE9 and MGE8 gas/electric
95% AFUE MGE9 with FreezeShield, or the 80% AFUE MGE8.
GSHA MGE product page
MHP heat pump
All-electric heat pump with 3 to 10 kW of electric heat.
GSHA MHP product pageMCE electric/electric
Electric heat with electric cooling, 0.75 to 3.0 tons.
GSHA MCE product pageV-Series, sleeves and louvers
V-Series HWC and EWC units, wall sleeves and louvers.
All MagicPak productsCurrent MagicPak offers
Ask GSHA about current MagicPak offers.
Financing programs available through GSHA are on our financing page. Utility incentives run separately; check current eligibility with Nicor Gas and your electric utility.
Questions and answers
Can I pull the permit myself in Joliet to save time?
No. Joliet says the contractor, not the homeowner, must pull the permit, and requires contractor registration, insurance, a letter of intent and a Joliet-accepted HVAC license. GSHA handles that paperwork.
How long does a New Lenox permit take?
The village’s guide asks three to five working days. For an emergency installation, the application must still be filed the next business day.
Our townhomes are from the late 1990s. Will a new MagicPak fit the original opening?
It depends on the original equipment. We record the existing model, measure the sleeve and louver, and check current MagicPak literature; the quote states whether the opening can be reused or must change.
Is the MGE9 worth it over the MGE8 in Will County?
With most of the county on gas, the MGE9’s 95% AFUE can lower heating costs compared with the 80% MGE8, but it produces winter condensate and has a lower cooling rating. We compare both for your home, including vent and drain requirements.
My building is in Naperville. Do ComEd incentives apply?
Not for customers of Naperville’s municipal electric utility, which covers most of the city including its Will County part. Nicor Gas programs still apply to Nicor customers.
What warranty does MagicPak offer?
MagicPak lists a 5-year limited parts warranty and a 20-year limited warranty on the stainless steel heat exchanger, with no registration required for new single packaged vertical units.
More MagicPak pages
MagicPak authorized dealer in Illinois (main page) · Magic-Pak package units · MGE · MHP · MCE
Other counties
Request a free MagicPak installation estimate
Tell us about your home and the unit you are replacing in Will County. We will follow up to schedule a free, no-obligation visit, measure the closet and wall opening, check the vent, gas, electrical and ductwork, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
On-site visit
A GSHA comfort advisor measures the unit, checks the existing installation and explains the MagicPak options that fit.
Written quote
You receive an itemized quote with the equipment, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized MagicPak dealer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- MagicPak M-Series overview — https://www.magicpak.com/products/m-series (accessed 2026-10-23)
- MagicPak MGE9 — https://www.magicpak.com/products/m-series/mge9 (accessed 2026-10-23)
- MagicPak MGE8 — https://www.magicpak.com/products/m-series/mge8 (accessed 2026-10-23)
- MagicPak MHP — https://www.magicpak.com/products/m-series/mhp (accessed 2026-10-23)
- MagicPak MCE — https://www.magicpak.com/products/m-series/mce (accessed 2026-10-23)
- MagicPak warranty — https://www.magicpak.com/products/warranty (accessed 2026-10-23)
- Census Reporter, ACS 2020-2024 5-year, table B25024 Units in Structure, Will County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25024&geo_ids=05000US17197 (accessed 2026-10-23)
- Census Reporter, ACS 2020-2024 5-year, tables B25040 and B25035, Will County — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035&geo_ids=05000US17197 (accessed 2026-10-23)
- Village of New Lenox – Miscellaneous Permits Guide — https://www.newlenox.net/DocumentCenter/View/113 (accessed 2026-09-16)
- Village of New Lenox – contractor registration FAQ — https://www.newlenox.net/m/faq?cat=16 (accessed 2026-09-16)
- City of Lockport – building permit FAQ — https://www.cityoflockport.net/Faq.aspx?QID=68 (accessed 2026-09-16)
- City of Lockport – HVAC Replacement application — https://www.cityoflockport.net/DocumentCenter/View/7049 (accessed 2026-09-16)
- City of Joliet – building code information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-code-information (accessed 2026-09-16)
- City of Joliet – building permit forms — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-permit-forms (accessed 2026-09-16)
- City of Joliet – residential permit information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/residential-building-permit-information (accessed 2026-09-16)
- Village of Plainfield – Building and Code Enforcement — https://www.plainfieldil.gov/departments/building-and-code-enforcement (accessed 2026-09-16)
- Will County Building Ordinance Sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-09-16)
- Will County Land Use Department – Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-09-16)
- Nicor Gas – Where We Are — https://www.nicorgas.com/company/where-we-are.html (accessed 2026-09-16)
- City of Naperville Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
- Nicor Gas Residential Rebates — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
- Nicor Gas Multi-Family Savings — https://www.nicorgas.com/ways-to-save/multi-family-savings.html (accessed 2026-10-23)
- ComEd Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
