Authorized Mitsubishi Electric dealer · Will County, IL
Mitsubishi Electric Dealer Serving Will County, IL
GSHA Services, LTD is an authorized Mitsubishi Electric dealer and installer serving Will County homeowners from Joliet and Plainfield to New Lenox, Bolingbrook and Romeoville. We have no office in Will County: estimators, installation crews and our own licensed electricians come from our Woodstock and Lake Bluff offices. On a Mitsubishi job we size the system room by room, install the ductless, multi-zone, ducted or intelli-HEAT equipment, handle the line sets, condensate and electrical work, pull the municipal permit, commission the system and register the Mitsubishi warranty. GSHA installs other brands too, so a Mitsubishi recommendation is made because it fits the house.
Will County has the newest housing and the highest gas share in our service area. Census Bureau ACS 2024 five-year estimates put utility gas at 87.9 percent of occupied homes, bottled or LP gas at 2.0 percent and electricity at 9.3 percent, with a median build year of 1992 and 82.8 percent of homes owner-occupied. Most Will County houses already have a gas furnace and central air on ducts, so the typical Mitsubishi project here is not a whole-house conversion: it is intelli-HEAT on an existing furnace, or a ductless system for the bonus room, finished basement or sunroom the builder’s ductwork never served well.

Communities we serve in Will County
Our published ZIP list includes Joliet, the county seat, which also reaches into Kendall County; New Lenox, Crest Hill and Romeoville, entirely within Will County; Plainfield, partly in Kendall; Bolingbrook, shared with DuPage; and Channahon, which extends into Grundy. Four more listed communities sit mostly outside Will County but include Will County neighborhoods: Naperville (mostly DuPage, with its own electric utility), Aurora, Lemont and Tinley Park. In a cross-county town, the building department and sometimes the electric utility depend on which side of the line your house is on, and GSHA sorts that out at the estimate. Our crews have worked recently in Joliet, Romeoville, Crest Hill and Channahon.
Lockport and Frankfort are also on the published ZIP list, but Crete is not, although our crews have recently worked there. If you live there or elsewhere in southern Will County, please confirm your address at (224) 220-3660 or through the estimate form before scheduling. The complete list is on the GSHA service area page.
Mitsubishi Electric guidance for Will County homes
intelli-HEAT for the gas-and-ducts house. With nearly nine in ten homes on Nicor Gas and most built since the 1980s with forced-air ducts, Will County is a natural fit for Mitsubishi’s intelli-HEAT. The PAA-NL heat pump coil installs on top of the existing furnace and connects to a P-Series or MXZ outdoor unit, replacing the air conditioner for cooling and carrying most of the heating, while the furnace comes on automatically in extreme cold. Mitsubishi lists the PAA-NL at up to 20 SEER2 and requires an ANSI Z21.47/CSA 2.3 certified furnace. Many 1990s furnaces are reaching the end of their lives, so GSHA inspects the furnace, its flue and the ducts at the same visit and prices the options side by side if the furnace should be replaced first.
Bonus rooms, basements and sunrooms. The rooms over the garage and the finished lower levels of 1990s and 2000s subdivisions are the most common reason Will County homeowners call about ductless. A single-zone system fixes the room without rebalancing the whole house: the MSZ-JX and MSZ-HX wall units are listed by Mitsubishi at up to 20 SEER2 and down to 22 dB(A), the MFZ-KX floor console sits under a window, and the MLZ-KX ceiling cassette fits between standard 16-inch joists, which suits a basement media room. Where two or three rooms need help, one multi-zone outdoor unit can serve them all; Mitsubishi says a multi-zone outdoor unit can connect to up to eight ductless or ducted indoor units.
Propane and electric-heat homes. The roughly one in nine Will County homes heated with propane or electricity, many on larger lots outside the subdivisions, are where a whole-home Mitsubishi heat pump pays off most. Mitsubishi states its Hyper-Heating INVERTER (H2i) systems deliver 100% of rated heating capacity at 5°F with operation continuing below zero, limits varying by system. With ducts, a Mitsubishi outdoor unit and an SVZ-NL or PVA-NL multi-position air handler take over the house, with backup heat sized for the coldest nights; without ducts, a multi-zone system does the same room by room.
Controls. Every Mitsubishi system can run from a wall controller such as the MHK2 wireless touchscreen, and select systems connect to Mitsubishi’s Comfort app for remote and local smartphone control; some units have built-in Wi-Fi and others need an adapter, which we confirm on the quote and set up at start-up.
Permits, utilities and installation considerations
In Will County the contractor files the permit and the municipality inspects. GSHA handles the application, the Mitsubishi specification sheets, contractor registration and inspections. Here is what the municipalities we checked publish.
- Village of New Lenox. The Miscellaneous Permits Guide requires a permit for air conditioning units and furnaces submitted with manufacturer’s specifications, calls for liquid-tight flexible metallic conduit outdoors and a breaker no larger than the condenser label allows, and requires a final inspection; allow three to five working days. Contractors must register with the village.
- City of Joliet. The building code page requires contractor registration, a certificate of insurance, a per-project letter of intent and a Joliet-accepted HVAC contractor license, with HVAC inspections after completion. The contractor, not the homeowner, must pull the permit, and permits are not issued over the counter (residential permit information).
- Village of Plainfield. Permits go through the Permitting & Licensing Portal, and the building codes page lists the adopted mechanical and electrical codes; GSHA confirms the permit category for a new ductless system with the Building Department.
- City of Lockport. The permit FAQ treats HVAC as an over-the-counter permit, and the HVAC application asks for spec sheets, a plat of survey showing any outdoor unit, and wiring by a licensed electrician.
- Unincorporated Will County. The Land Use Department Building Section permits through SmartGov; Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment and electrical installations, and contractors must be registered with the county.
- Other municipalities (Bolingbrook, Romeoville, Crest Hill, Channahon, Naperville, Aurora, Lemont, Tinley Park) run their own building departments; GSHA confirms the requirement before scheduling.
Where the outdoor unit can go. Plainfield’s zoning code (Sec. 9-14, Table II-2) permits air conditioning equipment only in rear, side and corner side yards at least four feet from all property lines, never the front yard, and its noise regulations (Sec. 6-232) limit residential sound at the property line to 55 dBA from 7 a.m. to 7 p.m. and 50 dBA overnight; on a tight subdivision lot GSHA checks the outdoor unit’s published sound data against its distance to the lot line. Lockport’s Zoning Table 156.023 allows a condenser in a corner side, interior side or rear yard but not the required front yard and leaves similar equipment to the Zoning Administrator, so we confirm how it treats a mini-split outdoor unit. Subdivision HOA covenants can add screening or location rules, and we ask about them at the estimate.
Utilities and incentives. Nicor Gas’s service territory includes Will County communities such as Aurora, Bolingbrook, Channahon, Crest Hill and Joliet, and its 2026 residential rebates list furnaces and smart thermostats but no air conditioner or heat pump rebate. ComEd delivers electricity in New Lenox, Lockport, Plainfield and Joliet, and its heating and cooling discounts cover ducted, ductless and geothermal heat pumps, with eligibility requirements and offers that change. Most of Naperville, including its Will County portion, is served by the city’s municipally owned electric utility, so ComEd programs do not apply to Naperville Electric customers. Check current eligibility with ComEd or your city utility; GSHA tells you which quoted equipment qualifies.
Electrical and what GSHA handles. Each outdoor unit needs its own circuit sized to the manufacturer’s label and an outdoor disconnect; New Lenox specifies liquid-tight conduit and a breaker no larger than the label allows, and Lockport requires a licensed electrician for the wiring. GSHA’s own licensed electricians do that work on every job. We pressure-test and evacuate the line sets, run exterior lines in a cover, raise the outdoor unit above the snow line, commission the system, set up the controls and register the Mitsubishi warranty.
Mitsubishi Electric products we install in Will County
The same eight categories are available county-wide. Models, published ratings and sources are on the main Mitsubishi Electric page.

Wall-Mounted Ductless
Single rooms, additions and open areas, alone or as part of a multi-zone system.
MSZ-FX, GX, EX, JX, WX, HX
DetailsFloor-Mounted
A low console where a radiator or baseboard heater used to be.
MFZ-KX
DetailsCeiling Cassettes
Recessed units that keep walls clear in kitchens and basements.
MLZ-KX, SLZ-NL
DetailsDucted Air Handlers
Whole-home heat pumps on existing ducts, or short-run units for one or two rooms.
SVZ-NL, PVA-NL, SEZ-NL
DetailsMulti-Zone Systems
One outdoor unit, up to eight indoor units, a setting for every room.
MXZ, SMART MULTI H2i
Detailsintelli-HEAT Dual Fuel
A heat pump coil on your gas furnace, with automatic switchover in extreme cold.
PAA-NL
DetailsControls & Comfort App
Wall controllers and smartphone control for select systems.
Comfort app, MHK2
DetailsLossnay Ventilation
Energy recovery ventilation for tighter homes and additions.
Residential Ducted Lossnay ERV
DetailsCurrent Mitsubishi Electric offers
Ask GSHA about current Mitsubishi Electric offers.
Promotions change through the year and name their own equipment and dates, so we confirm what applies to your system and installation date at the estimate. Financing through Synchrony and Service Finance is described on our financing page.
Utility incentives are separate from manufacturer offers and depend on whether ComEd or Naperville Electric serves your home; we confirm what applies at the estimate rather than promising an incentive up front.
Questions and answers
Do you serve my address in Will County?
Yes, if it is in a listed community: Joliet, New Lenox, Crest Hill, Romeoville, Plainfield, Bolingbrook, Channahon, or the Will County parts of Naperville, Aurora, Lemont and Tinley Park. Lockport and Frankfort are on the list as well; Crete and other southern Will County addresses should be confirmed first.
My house has a 1990s furnace and central air. Is intelli-HEAT a good fit?
It often is, if the furnace meets Mitsubishi’s ANSI Z21.47/CSA 2.3 certification requirement and has life left. intelli-HEAT replaces the air conditioner with a heat pump coil on the furnace and uses the existing ducts; the furnace takes over automatically in extreme cold. If the furnace is near the end of its life, we price replacing it alongside.
Our bonus room over the garage is always uncomfortable. What fixes it?
A single-zone Mitsubishi system, usually a wall unit or a ceiling cassette, gives the room its own heating and cooling and its own controller without changing the rest of the house. It connects to a compact outdoor unit through a small hole in the wall.
What does Joliet require from the contractor?
Joliet requires contractor registration, insurance, a per-project letter of intent and a Joliet-accepted HVAC license, and the contractor must pull the permit. GSHA handles all of it.
Where can the outdoor unit go in Plainfield?
In a rear, side or corner side yard at least four feet from every property line, never the front yard, and within Plainfield’s lot-line noise limits of 55 dBA by day and 50 dBA overnight. GSHA checks the location and published sound data before filing.
Which incentives apply?
For a heat pump, ComEd’s heating and cooling discounts for ducted and ductless heat pumps, subject to eligibility rules that change; ComEd serves New Lenox, Lockport, Plainfield and Joliet. Naperville Electric customers are outside ComEd’s programs. Nicor Gas’s 2026 rebates list furnaces and thermostats, not heat pumps.
Are there Mitsubishi Electric offers right now?
Ask GSHA about current Mitsubishi Electric offers. We confirm what applies to your equipment and installation date when you book.
What affects the installed price?
The number of zones and indoor unit types, the outdoor unit’s capacity, the furnace’s condition for intelli-HEAT, line-set length, electrical work, HOA requirements and your municipality’s permit process. Published single-zone pricing is on our Mitsubishi ductless page; every job is confirmed by a free in-home estimate.
More Mitsubishi Electric pages
Authorized Mitsubishi Electric dealer in Northern Illinois (main page) · Mitsubishi ductless prices and installation · Ductless systems · Best heat pumps for cold climates
Other counties
Request a free Mitsubishi Electric installation estimate
Tell us about your Will County home and the rooms you want to heat and cool. We will follow up to schedule a free, no-obligation in-home visit, measure the load room by room, check where the outdoor unit and lines can go and look at your electrical panel, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA comfort advisor measures the rooms, checks the existing system and explains the Mitsubishi Electric options that fit.
Written quote
You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing, water treatment and generator contractor and an authorized Mitsubishi Electric dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Census Reporter API — ACS 2020-2024 5-year tables B25035, B25040, B25003, Will County (05000US17197) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040,B25003&geo_ids=05000US17197 (accessed 2026-09-16)
- Village of New Lenox — Miscellaneous Permits Guide — https://www.newlenox.net/DocumentCenter/View/113 (accessed 2026-09-16)
- Village of New Lenox — Contractor registration FAQ — https://www.newlenox.net/m/faq?cat=16 (accessed 2026-09-16)
- City of Joliet — Building Code Information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-code-information (accessed 2026-09-16)
- City of Joliet — Building Permit Forms — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-permit-forms (accessed 2026-09-16)
- City of Joliet — Residential Building Permit Information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/residential-building-permit-information (accessed 2026-09-16)
- Village of Plainfield — Building and Code Enforcement — https://www.plainfieldil.gov/departments/building-and-code-enforcement (accessed 2026-09-16)
- Village of Plainfield — Building Codes — https://www.plainfieldil.gov/departments/building-and-code-enforcement/building-codes (accessed 2026-09-16)
- Village of Plainfield Zoning Sec. 9-14 Table II-2 — https://library.municode.com/il/plainfield/codes/code_of_ordinances?nodeId=COOR_CH9ZOOR_ARTIIGEPR_S9-14PEOBREYA (accessed 2026-09-16)
- Village of Plainfield Noise Regulations Sec. 6-232 — https://library.municode.com/il/plainfield/codes/code_of_ordinances?nodeId=COOR_CH6OFMIPR_ARTVIINORE (accessed 2026-09-16)
- City of Lockport — Building permit FAQ — https://www.cityoflockport.net/Faq.aspx?QID=68 (accessed 2026-09-16)
- City of Lockport — HVAC Replacement application — https://www.cityoflockport.net/DocumentCenter/View/7049 (accessed 2026-09-16)
- City of Lockport Zoning Chapter 156 (Table 156.023) — https://www.cityoflockport.net/DocumentCenter/View/1131/Chapter-156—Zoning-PDF (accessed 2026-09-16)
- Will County Land Use Department — Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-09-16)
- Will County Building Ordinance Sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-09-16)
- Will County — Contractor registration — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (accessed 2026-09-16)
- City of Naperville — Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
- Nicor Gas — Where we are — https://www.nicorgas.com/company/where-we-are.html (accessed 2026-09-16)
- Nicor Gas — Residential Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-09-16)
- ComEd — Home Heating & Cooling Discounts — https://www.comed.com/ways-to-save/for-your-home/rebates-discounts/heating-cooling-discounts (accessed 2026-09-16)
- Mitsubishi Electric — Wall-mounted products — https://www.mitsubishicomfort.com/products/wall-mounted (accessed 2026-10-23)
- Mitsubishi Electric — Ducted solutions (SVZ-NL, PVA-NL, PAA-NL, multi-zone) — https://www.mitsubishicomfort.com/products/ducted-solutions (accessed 2026-10-23)
- Mitsubishi Electric — Ceiling cassettes — https://www.mitsubishicomfort.com/products/ceiling-cassette (accessed 2026-10-23)
- Mitsubishi Electric — intelli-HEAT dual fuel system — https://www.mitsubishicomfort.com/intelli-heat (accessed 2026-10-23)
- Mitsubishi Electric — Mythbusters: heat pumps for extreme cold climates — https://www.mitsubishicomfort.com/blog/mythbusters-heat-pumps-for-extreme-cold-climates (accessed 2026-10-23)
- Mitsubishi Electric — Smart controls — https://www.mitsubishicomfort.com/products/smart-controls (accessed 2026-10-23)
- Mitsubishi Electric — Comfort app — https://www.mitsubishicomfort.com/comfort-app (accessed 2026-10-23)
- GSHA Services — Service area (ZIP list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
