Authorized Cummins Dealer · Cook County, IL
Cummins Generator Dealer Serving Cook County, IL
GSHA Services, LTD installs and services Cummins QuietConnect™ home standby generators across most of Cook County from our Lake Bluff office at 11 N Skokie Hwy, Lake Bluff, IL 60044. We do not have an office inside Cook County, but most of it is close: the nearest north-suburban villages are about 10 miles in a straight line from Lake Bluff, Chicago’s North Side about 23, the Loop about 30, and the south and southwest suburbs in our table roughly 40 to 45. A few communities on the county’s northwest edge are nearer to our Woodstock headquarters, and we dispatch from whichever office is closer.
GSHA is an authorized Cummins dealer and installer with its own licensed electricians and gas-line technicians. Cook County is the oldest and most varied part of our territory: three different gas utilities depending on the address, permits from the City of Chicago, from more than a hundred suburbs or from the county, a large share of houses built before 1940, and combined sewers that back up into basements when the power and the pumps are out. Each of those changes what a Cummins installation involves, and we plan for them at the free estimate.

Communities we serve in Cook County
The table lists the twelve most populous municipalities wholly or partly in Cook County, with April 1, 2020 Census counts and straight-line miles from the nearer GSHA office. Cicero and Berwyn were not on our measured list, so their mileage is estimated from neighboring Oak Park (27.4 miles) and marked approximate. All twelve are inside our standard 50-mile radius; Tinley Park, at 48.9 miles, is the farthest suburb we measured.
| City or village | Population (2020 Census) | Miles from nearer office | Gas utility and notes |
|---|---|---|---|
| Chicago | 2,746,388 | 29.9 (Lake Bluff, to the Loop) | Peoples Gas (Nicor in some annexed areas); City of Chicago permits |
| Elgin | 114,797 | 21.1 (Woodstock) | Also in Kane County |
| Cicero | 85,268 | approx. 29 (Lake Bluff) | Combined sewer system per MWRD |
| Schaumburg | 78,723 | 20.8 (Lake Bluff) | Also partly in DuPage County |
| Evanston | 78,110 | 18.1 (Lake Bluff) | Nicor Gas; combined sewer system per MWRD |
| Arlington Heights | 77,676 | 14.8 (Lake Bluff) | Nicor Gas; combined and separate sewers per MWRD |
| Palatine | 67,908 | 15 (Lake Bluff) | Also partly in Lake County |
| Skokie | 67,824 | 17.9 (Lake Bluff) | County Building and Zoning satellite office at 5600 Old Orchard Rd |
| Des Plaines | 60,675 | 17.1 (Lake Bluff) | Combined and separate sewers per MWRD |
| Orland Park | 58,703 | 44.8 (Lake Bluff) | A small portion lies in Will County |
| Oak Lawn | 58,362 | 39.5 (Lake Bluff) | Within our 50-mile radius |
| Berwyn | 57,250 | approx. 30 (Lake Bluff) | Combined sewer system per MWRD |
Communities more than 50 miles from both offices are quoted case by case. The full ZIP-code list is on our service area page.
Cummins generator guidance for Cook County homes
Basement backups and the sump pump
The Metropolitan Water Reclamation District’s Cook County Flood Response Resource Guide (December 15, 2025) explains that the region’s flat landscape makes it prone to flooding, that many communities have combined sewers carrying sewage and rainwater in the same pipes, and that basement backups happen when rainwater enters neighborhood sewers faster than it can drain. It lists a malfunctioning sump pump among the sources of water in a home and notes that most homeowner’s policies do not cover flooding. A sump pump protects the basement only while it has power, so it is the first circuit on every Cook County generator we size. The Cummins QuietConnect™ 13 kW, rated 54.2 A on natural gas or propane, carries a sump pump, furnace, refrigerator and lights in most houses. A central air conditioner usually moves the house to the 17 kW (70.8 A), and two air conditioners to the 20 kW (75 A on natural gas, 83.3 A on propane) with Cummins’ built-in load management for up to four loads. For the largest homes in the north and northwest suburbs, Cummins lists liquid-cooled QuietConnect™ models from 25 kW upward, quoted after a site visit.
Older houses, older services
According to the Census Bureau’s 2019-2023 American Community Survey, 27.9 percent of Cook County houses were built in 1939 or earlier and only 4.4 percent since 2010, and 45.3 percent of housing units are single-family houses. In a house that old the electrical service, meter socket and panel may have been replaced several times, or not at all. The Cummins automatic transfer switch is installed between the ComEd meter and the panel, so our electricians look at what is actually on the wall before recommending a whole-house service-entrance switch or a switch that carries selected circuits. If a panel change is needed, you hear about it at the estimate, not on installation day.
Close-set lots
Cummins’ specification sheet says NFPA 37 permits its air-cooled QuietConnect™ units to be installed 18 inches from a building, and the enclosure measures 34.1 by 36.0 by 27.3 inches. On a 30-foot city lot or a narrow suburban side yard that still leaves the question of windows, gas meter location, lot lines and neighbors. Cook County’s own generator permit asks for the unit’s distance from every lot line on the site plan, and most suburbs ask for something similar, so we lay the pad out on the plat of survey first. Cummins rates the units at 65 dB(A) at 23 feet under normal load, and its crank-only exercise mode makes the weekly self-test quieter still, which neighbors on a close lot notice.
Three gas utilities and the meter check
Gas heats 82.2 percent of occupied homes in Cook County (2019-2023 ACS, including bottled, tank and LP gas), so most houses already have a gas service to tie into; the question is capacity. Cummins lists full-load natural gas consumption of 217,227 BTU/hr for the 13 kW, 245,954 BTU/hr for the 17 kW and 255,947 BTU/hr for the 20 kW, plus a minimum supply pressure of 3.5 inches of water column at the generator, on top of the furnace, water heater and range already on the meter. If the existing meter and regulator cannot carry the total, the utility has to upgrade the meter before the generator can run, and we coordinate that with Nicor Gas, Peoples Gas or North Shore Gas, whichever serves your address.
Cold-weather rating
Cummins says standard air-cooled models perform down to 0°F out of the box and the extreme-cold E models down to -40°F. We quote the E versions (RS13AE, RS17AE, RS20AE) or a Cummins cold weather kit for Cook County installations.
Permits, utilities and installation considerations
Who issues the permit
- City of Chicago. Inside the city, the permit comes from the City of Chicago; Cook County’s e-permits page states that it cannot process permits for the city. GSHA pulls the city permit.
- Incorporated suburbs. The large majority of suburban homeowners deal with their own village or city building department; the county cannot process permits for properties inside incorporated suburbs. GSHA files with that department and meets its inspectors.
- Unincorporated Cook County. Only about 2.4 percent of county residents live in unincorporated areas, and roughly 56 percent of them are in Bremen, Lemont, Leyden, Northfield, Maine and Orland townships, according to the Civic Federation. For those addresses the Cook County Department of Building and Zoning issues the permit: Generator is one of the permit types it accepts online, its e-permits page lists a $100 deposit, and it enforces the 2014 Cook County Electrical Code, the 2014 Illinois Plumbing Code and, for drawings submitted after December 1, 2021, the 2021 International Residential Code with county amendments. The county’s generator permit sheet asks for a plat of survey sealed by an Illinois registered surveyor and not more than five years old, a site plan showing the unit’s distance from every lot line, a single-line diagram of the meter, main panel and transfer switch, cut sheets for the generator and switch, and letters of intent from an electrical contractor registered with the department and from a registered plumbing contractor. The department’s FAQ adds that references to the National Electrical Code must be removed from drawings and that electrical inspections are scheduled by calling the township’s field inspector. The sheet dates from 2015 and lists a different deposit formula than the current e-permits page, so we confirm the fee when we apply.
Whichever authority applies, GSHA prepares the drawings, pulls the electrical and gas permits and attends the inspections. Once the permit is issued, most installations take one to two days on site.
Gas utilities
Nicor Gas serves most suburban communities, and its county-by-county list names every suburb in our table and Chicago’s annexed areas. Inside the city, Peoples Gas says it delivers natural gas to more than 898,000 customers. Along the lake, North Shore Gas serves nearly 166,000 customers in 54 communities between Winnetka and the Wisconsin border, and Nicor’s list names some of the same north-shore villages, so there the utility depends on the address. We confirm it from your gas bill or meter tag before sizing anything.
Electric service
ComEd’s territory runs from Iroquois County north to the Wisconsin border and from the Iowa border to Indiana, which takes in all of Cook County. Every Cummins transfer switch we install here sits behind a ComEd meter: when utility power drops, the switch starts the generator and moves the house onto it, and when ComEd returns it transfers back and lets the generator cool down and shut off.
Wells and septic
Private wells and septic systems exist in Cook County, mostly in the unincorporated and outlying areas. The Cook County Department of Public Health reviews and approves private sewage disposal systems throughout the county except in incorporated Barrington Hills, Inverness, Palos Park and South Barrington, which have their own septic ordinances, and Building and Zoning requires Health Department approval before construction projects involving wells and septic. The county’s generator application asks whether the property is on well and septic or on water and sewer. If you are on a well, the well pump goes on the load list and affects the size we recommend, and we keep the pad and gas trench clear of the septic field.
Cummins products we install in Cook County
The same Cummins line is available county-wide. Full specifications are on the main Cummins page.

QuietConnect™ 13 kW
54.2 A on natural gas or propane. Sump pump, furnace, refrigerator and lights in an older house.
Models: RS13A, RS13AE
Explore the Cummins 13 kW
QuietConnect™ 17 kW
70.8 A on either fuel. Essentials plus one central air conditioner.
Models: RS17A, RS17AE
Explore the Cummins 17 kW
QuietConnect™ 20 kW
75 A on natural gas, 83.3 A on propane, with load management for up to four loads.
Models: RS20A, RS20AC, RS20AE, RS20ACE
Explore the Cummins 20 kWLiquid-Cooled QuietConnect™
Cummins lists liquid-cooled models from 25 kW upward for the largest homes; quoted after a site visit.
Models: RS25 and up
Liquid-cooled detailsCurrent Cummins offers
Ask GSHA about current Cummins offers.
Promotions change through the year and each names its qualifying equipment and dates, so tell us your planned installation date and we will say which offer, if any, applies. Financing through Synchrony and Service Finance is on our financing page. See financing options.
Questions and answers
Do you install Cummins generators inside Chicago, or only in the suburbs?
Both. The Loop is 29.9 miles in a straight line from our Lake Bluff office and the North Side about 23, well inside our standard 50-mile radius. Inside Chicago the gas utility is Peoples Gas (Nicor serves some annexed areas) and the permit comes from the City of Chicago; GSHA runs the gas check, coordinates any meter upgrade and pulls the city permit.
Do I need a permit in unincorporated Cook County?
Yes. The Cook County Department of Building and Zoning accepts generator permits online with a deposit currently listed at $100, and asks for a sealed plat of survey, a site plan with lot-line distances, a single-line diagram, equipment cut sheets and letters of intent from registered electrical and plumbing contractors. GSHA prepares that package; inside a city or village, that municipality issues the permit instead.
Which gas utility will handle my meter?
Nicor Gas in most suburbs, Peoples Gas inside the city, and North Shore Gas in the north-shore suburbs between Winnetka and the Wisconsin border, where Nicor also serves some villages. We confirm the utility from your bill and coordinate any meter upgrade with that company.
My house is more than 80 years old. Can it take a standby generator?
Usually yes, but the electrical service decides how. Our electricians check the meter socket, panel and service size at the estimate and recommend either a whole-house service-entrance transfer switch or a switch for selected circuits. If a panel change is needed, it is in the quote.
Will a generator stop my basement from flooding?
A generator keeps your sump pump running during an outage, which is when many basement floods happen. It does not stop a combined-sewer backup, which MWRD describes as rainwater entering the sewers faster than it can drain; backflow protection is a separate plumbing measure. The sump pump is the first circuit we put on every Cook County generator.
Is Orland Park inside your service area?
Yes. Orland Park is 44.8 miles in a straight line from our Lake Bluff office and Oak Lawn 39.5, both inside our standard 50-mile radius; Tinley Park, at 48.9 miles, is the farthest southwest suburb on our measured list.
What affects the installed price in Cook County?
The generator size, the transfer switch type, panel or service work on an older house, the length of the gas run, a utility meter upgrade, the permit authority’s fees and drawing requirements, and placement limits on a close lot. Every job is quoted after a free in-home estimate; see our Cummins installation and pricing page.
Which Cummins offers apply right now?
Ask GSHA about current Cummins offers. We confirm what applies to your generator and installation date at the estimate; financing is described on our financing page.
More Cummins pages
Authorized Cummins dealer in Northern Illinois (main page) · Cummins installation and pricing · Cummins generators · Cummins fault codes · Whole-house generator installation
Other counties
Request a free Cummins installation estimate
Tell us about your home and the generator you are considering in Cook County. We will follow up to schedule a free, no-obligation in-home visit, count the loads you want carried, check the gas meter, electrical service and placement, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA advisor reviews your panel, gas meter and the proposed pad location and explains the Cummins options that fit.
Written quote
You receive an itemized quote with the generator, transfer switch, warranty registration, permits and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Cummins dealer for home standby generators. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Cummins generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- Cummins Quiet Connect Series Specification Sheet NAS-6254 (RS13A, RS17A, RS20A, RS20AC) — https://mart.cummins.com/imagelibrary/data/assetfiles/0058055.pdf (accessed 2026-10-23)
- Cummins QuietConnect™ Series (home standby) — https://www.cummins.com/en-na/na/generators/home-standby/quietconnect-series (accessed 2026-10-23)
- Cummins QuietConnect™ product listing (liquid-cooled RS25 and up) — https://www.cummins.com/generators/quietconnecttm-series?v=3151&application=Residential+Home+Standby (accessed 2026-10-23)
- Cook County, Illinois (Wikipedia, 2020 Census places table) — https://en.wikipedia.org/wiki/Cook_County,_Illinois (verified by GSHA 2026-09)
- U.S. Census Bureau ACS 2019-2023 Narrative Profile, Cook County — https://www.census.gov/acs/www/data/data-tables-and-tools/narrative-profiles/2023/report.php?geotype=county&state=17&county=031 (verified by GSHA 2026-09)
- U.S. Census Bureau QuickFacts, Cook County — https://www.census.gov/quickfacts/fact/table/cookcountyillinois/PST045224 (verified by GSHA 2026-09)
- Nicor Gas, Where We Are — https://www.nicorgas.com/company/where-we-are.html (verified by GSHA 2026-09)
- Peoples Gas, Service Area — https://www.peoplesgasdelivery.com/company/area (verified by GSHA 2026-09)
- North Shore Gas, About — https://www.northshoregasdelivery.com/company/about (verified by GSHA 2026-09)
- Commonwealth Edison (Wikipedia; service territory) — https://en.wikipedia.org/wiki/Commonwealth_Edison (verified by GSHA 2026-09)
- Cook County Department of Building and Zoning — https://www.cookcountyil.gov/agency/building-and-zoning-0 (verified by GSHA 2026-09)
- Cook County e-Permits — https://www.cookcountyil.gov/service/e-permits (verified by GSHA 2026-09)
- Cook County Generator Installation Permit Requirements (rev. 08/04/2015) — http://www.cookcountyil.gov/sites/g/files/ywwepo161/files/service/generatorinstallationrequirements.pdf (verified by GSHA 2026-09)
- Cook County Building and Zoning FAQ (November 2020) — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/faq-building_and_zoning.pdf (verified by GSHA 2026-09)
- Cook County Building and Zoning Code Posting (2021 code adoption) — https://www.cookcountyil.gov/sites/g/files/ywwepo161/files/documents/2024-03/Code%20Posting%202023.pdf (verified by GSHA 2026-09)
- Civic Federation, Unincorporated Areas of Cook County (December 9, 2014) — https://www.civicfed.org/sites/default/files/REPORT_UnincorporatedAreasofCookCounty.pdf (verified by GSHA 2026-09)
- Cook County Department of Public Health, Septic Systems — https://cookcountypublichealth.org/environmental-health/water-and-sewage/septic/ (verified by GSHA 2026-09)
- MWRD Cook County Flood Response Resource Guide (12/15/2025) — https://www.mwrd.org/sites/default/files/2025-12/Flood_Resource_Guide_251215.pdf (verified by GSHA 2026-09)
- GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
