Authorized Generac Dealer · Lake County, IL
Authorized Generac Dealer Serving Lake County, IL
Lake County homeowners are served from GSHA’s Lake Bluff office at 11 N Skokie Hwy, inside the county, with our Woodstock headquarters next door in McHenry County. GSHA Services, LTD is an authorized Generac dealer and installer: our estimators size the system, our gas-line technicians run the fuel line, our own licensed electricians install the transfer switch, and we pull the permit and meet the inspector, whether your house is on the North Shore, in the central county or out by the Chain O’Lakes.
Two Lake County facts shape most Generac quotes here. The county has two natural gas utilities, North Shore Gas and Nicor Gas, and several towns sit on both companies’ lists, so the utility that has to sign off on a meter upgrade depends on your exact address. And about 14.7 percent of the county’s roughly 258,500 occupied homes heat with electricity (U.S. Census Bureau, 2020-2024 American Community Survey), which changes generator sizing far more than square footage does. With a median build year of 1983, many homes also have panels and gas meters that predate any thought of a standby generator.

Communities we serve in Lake County
GSHA’s published service area covers these Lake County communities: Antioch, Deerfield, Grayslake, Gurnee, Highland Park, Ingleside, Lake Bluff, Lake Forest, Lake Villa, Lake Zurich, Libertyville, Lincolnshire, Mundelein, Round Lake, Vernon Hills, Wadsworth, Wauconda, Waukegan and Zion. Four more straddle a county line and are on the list too: Barrington and Buffalo Grove extend into Cook County, and Fox Lake and Island Lake extend into McHenry County. Ingleside is unincorporated, so its permits run through Lake County rather than a village hall.
Coverage follows the ZIP code, not the county line. Our crews also work in Winthrop Harbor, Beach Park, Kildeer, Deer Park, Long Grove and Hawthorn Woods, which are not named on the published list even though several share listed ZIP codes; if you live in one of them, or anywhere in Lake County not named above, call (224) 220-3660 and we will confirm coverage for your address. The full ZIP-code list is on our service area page.
Generac sizing guidance for Lake County homes
Gas-heated homes. About 83 percent of Lake County’s occupied homes heat with utility gas. In those houses the furnace itself draws little electricity, just the blower and controls, so a generator’s job is mainly the air conditioning, refrigeration, sump and ejector pumps, lights and outlets. A typical 1980s or 1990s colonial with one central air conditioner and a 200 A service is usually well served by Generac’s 18 kW or 22 kW with a 200 A service-entrance-rated switch. Larger North Shore and central-county homes commonly have two air conditioners, a second refrigerator, pool or spa equipment and sometimes an electric range; for those we look at the 24, 26 or 28 kW, or pair a smaller unit with a Generac Load Manager or the ecobee by Generac smart thermostat so the second compressor waits its turn when the generator is near capacity.
Electrically heated homes. The roughly 15 percent of Lake County homes that heat with electricity are a different sizing problem. Electric baseboard, an electric furnace or the backup heat strips in a heat pump air handler can draw more power than everything else in the house combined, and that load lands in January, exactly when outages are least comfortable. For those homes we either size a larger Generac, often the 26 or 28 kW, or deliberately put only part of the heat on the generator, and we explain that trade-off in writing. Generac’s 28 kW is rated 28 kW on propane and 25 kW on natural gas, with a maximum rated current of 116 A on propane and 104 A on natural gas at 240 V.
Essentials only. If you want to keep the furnace, refrigerator, sump pump, a few lights and the garage door working and nothing more, Generac packages its 10 kW with a 100 A limited-circuit switch. It is the smallest and lightest unit in the line at 344 pounds, and Generac rates it at 61 dB(A) at 23 feet under normal load and 49 dB(A) during its Quiet-Test exercise.
Sump and ejector pumps. Lake County basements commonly rely on a sump pump, and homes with basement bathrooms add a sewage ejector. Both stop with the power. They are small loads compared with an air conditioner, but they start hard, so they go on every Lake County load list we write, including essentials-only systems.
Winter. Generac recommends its battery heater and oil heater below 32°F and a breather heater below 0°F where heavy icing occurs. Every Lake County winter meets the first condition, so we recommend the battery and oil heaters on every install and quote them up front.
Permits, utilities and installation considerations
Permits and inspections
A Generac installation involves electrical and fuel-gas work, and in Lake County the permit comes from the municipality your address sits in, or from the county if you are unincorporated. GSHA prepares the application and schedules the inspections. What the local pages we checked say:
- Unincorporated Lake County (including Ingleside): Lake County Planning, Building and Development (500 W Winchester Rd, Unit 101, Libertyville; 847-377-2600; online Permit ePortal) requires a building permit to install or alter any equipment regulated by the building, electrical or mechanical code. A generator, its transfer switch and its gas line are all regulated equipment, so an unincorporated install is a permitted job.
- Village of Lake Bluff: The Community Development Department’s Building Division (847-283-6885) requires building permits for all projects that alter or improve a property and requires every contractor working in the Village to hold a Village contractor’s license. The Village enforces the 2017 National Electrical Code and the 2018 International Fuel Gas Code, among others.
- Village of Libertyville: The Building Division (325 N Milwaukee Ave, Suite 203; 847-918-2020) reviews plans, issues permits and inspects, and its online permit page accepts electrical service upgrade applications by email. Its residential permit page asks for a plat of survey showing the location of outdoor mechanical equipment, and we prepare the same kind of plat for a generator.
- Village of Grayslake: The Building Department (847-223-8515) says almost all building or property changes need a permit. In the Prairie Crossing subdivision you still apply to the Village, but Lake County performs the plan review and inspections under the annexation agreement. The Village limits construction work to 7:00 a.m. to 7:00 p.m. on weekdays and 8:30 a.m. to 5:00 p.m. on Saturdays.
- Village of Mundelein: The Building Department (300 Plaza Circle; 847-949-3283) takes applications through its online portal, asks for an electronic plat of survey for outdoor equipment, and needs 48 hours’ notice for inspections. Every permit carries an application fee, which GSHA confirms when it applies.
Other villages, including Lake Forest, Highland Park, Deerfield, Gurnee, Vernon Hills and Waukegan, run their own building departments; we file with whichever one covers your address and add its requirements to the schedule.
Placement and sound
Generac allows its units as close as 18 inches to a structure, away from doors, windows and fresh air intakes and subject to local codes. Lake County villages add their own rules. Mundelein’s zoning code limits ground-based mechanical equipment to interior side and rear yards, at least five feet from the rear lot line and three feet from an interior side lot line, with screening where it is visible from an adjoining lot or street; the code we read is written for HVAC equipment, so we confirm with the Village how it applies to a generator before the pad goes in. Mundelein’s noise chapter caps residential sound at the lot line at 55 dBA at night (10:00 p.m. to 7:00 a.m.) and 60 dBA by day. Generac’s published ratings, 61 to 67 dB(A) under load and 49 to 55 dB(A) in Quiet-Test exercise, are measured at 23 feet from the unit, not at a lot line, so the two numbers are not directly comparable, but on a tight lot they are a reason to choose the location carefully and schedule the exercise for daytime. Libertyville’s zoning code applies octave-band sound limits measured inside the receiving residence. We could not find a published generator setback for Lake Bluff, so we confirm placement with the Village at permit time.
Two gas utilities
North Shore Gas serves the eastern and central county; its tariff and service-area page list communities including Deerfield, Highland Park, Lake Bluff, Lake Forest, Libertyville, Vernon Hills and Zion, and the company describes a territory of 54 communities between Winnetka and the Illinois-Wisconsin border. Nicor Gas serves the western and northwestern county, including Barrington, Fox Lake, Ingleside, Lake Zurich, Round Lake and Wauconda. Antioch, Grayslake, Gurnee, Lake Villa, Mundelein and Waukegan appear on both companies’ lists, so we confirm the utility from your gas bill or meter tag. It matters because a standby generator is a big gas appliance: Generac lists full-load natural gas use of 235 cubic feet per hour for the 18 kW, 311 for the 22 kW and 297 for the 28 kW, on top of your furnace, water heater, range and dryer. If the existing meter and regulator cannot carry the total, the utility has to upgrade the meter before the generator can run at full output, and we coordinate that with North Shore Gas or Nicor Gas, whichever serves your home.
Electric service: ComEd
ComEd delivers electricity across all of Lake County, and the county has no municipal electric utility. The transfer switch goes between the ComEd meter and your panel. For whole-house coverage on a 200 A service, Generac packages its 14 through 28 kW generators with a 200 A service-entrance-rated switch in a NEMA 3R outdoor enclosure; if your service is larger, or your panel needs work before it can accept the switch, our electricians quote that at the estimate.
Gas, electrical and what GSHA handles
GSHA runs and pressure-tests the gas line from the meter to the generator, sets the pad, mounts the transfer switch and moves the circuits with our own licensed electricians, installs any load management modules, pulls the permit, attends the inspections, starts and load-tests the system, enrolls it in Mobile Link with you and registers it with Generac.
Generac products we install in Lake County
The full Generac air-cooled line and its accessories are available county-wide. The size table and installation details are on the main Generac page.

Generators, 10 to 18 kW
Essentials systems and smaller whole-house homes with one air conditioner.
Featured: 10 kW (7257), 14 kW (7258), 18 kW (7259)
Explore Generac generator sizes
Generators, 22 to 28 kW
Larger homes, two air conditioners and electrically heated houses that need more capacity in winter.
Featured: 22 kW (7260), 24 kW (7261), 26 kW (7327), 28 kW (7282)
Compare Generac sizesTransfer Switches & Load Management
Limited-circuit and service-entrance-rated switches, Generac Load Managers and the ecobee by Generac thermostat.
Featured: 7321 and 7323-7329 packages, Load Manager 50 A / 100 A, HVAC Energy Manager
How we install the switchMobile Link & Maintenance
Cellular Mobile Link is standard on current models. Service and repairs are dispatched from our Lake Bluff office.
Basic (free) and Premium plans; Service Schedule A / B
Generator maintenanceCurrent Generac offers
Ask GSHA about current Generac offers.
Each Generac promotion names its own qualifying models and dates, so we confirm which one, if any, applies to your generator and installation date in the written quote. Financing through Synchrony and Service Finance is available to qualified buyers, subject to credit approval. See financing options.
Questions and answers
Which office serves Lake County?
Our Lake Bluff office at 11 N Skokie Hwy, inside the county. Communities on the western edge, such as Fox Lake, Island Lake and Wauconda, are also close to our Woodstock headquarters, and we dispatch from whichever office makes sense for the job.
Is my gas from North Shore Gas or Nicor?
It depends on the address. North Shore Gas serves much of the eastern and central county, Nicor Gas the western and northwestern county, and several towns, including Grayslake, Gurnee, Mundelein and Waukegan, are on both companies’ lists. Your gas bill settles it; we confirm it at the estimate because that utility handles any meter upgrade.
Can one Generac run two air conditioners?
Often, yes, either by choosing a larger size such as the 26 or 28 kW or by adding a Generac Load Manager or the ecobee by Generac thermostat so the two compressors do not start at the same moment. We read both units’ nameplates at the estimate before recommending one approach.
My house has electric heat. What size do I need?
Usually a larger one, or a plan that puts only part of the heat on the generator. Electric heat can exceed every other load in the house combined, so we calculate it separately and show you what each option would and would not carry in winter.
Do I need a Village contractor’s license or permit?
GSHA handles that. Lake Bluff, for example, requires every contractor working in the Village to hold a Village contractor’s license, and every village we work in requires a permit for the electrical and gas work a generator involves. Unincorporated addresses are permitted by Lake County Planning, Building and Development.
What affects the installed price in Lake County?
The generator size and switch, any load management, the length of the gas run, a North Shore Gas or Nicor meter upgrade, any panel or service work, screening or placement requirements, cold-weather accessories and your village’s permit fee. Every job is quoted in writing after a free on-site estimate.
Which Generac offers apply right now?
Ask GSHA about current Generac offers; we confirm eligibility for your model and installation date when we quote.
More Generac pages
Authorized Generac dealer in Illinois (main page) · Generac generator sizes · Generac error codes · Overload alarm explained · Generator error codes, all brands · Generator installation
Other counties
Request a free Generac installation estimate
Tell us about your Lake County home and what you want running during an outage. We will follow up to schedule a free, no-obligation in-home visit, check your panel and gas meter, choose a spot for the generator that fits your village’s rules, and give you a written quote.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
In-home visit
A GSHA estimator reviews your loads, panel and gas supply and explains the Generac options that fit.
Written quote
You receive an itemized quote with the generator, transfer switch, permits, warranty registration and the work included. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Generac dealer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Generac generators across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands
GSHA Services, LTD is an independent authorized Generac dealer. Generac® is a registered trademark of Generac Power Systems, Inc.
Sources
- Census Reporter API, ACS 2024 5-year (2020-2024) tables B25040 and B25035, Lake County (05000US17097) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040&geo_ids=05000US17097 (accessed 2026-10-23)
- Lake County, IL, Building Permits (Planning, Building and Development) — https://www.lakecountyil.gov/740/Building-Permits (accessed 2026-10-23)
- Village of Lake Bluff, Building Permit Process — https://www.lakebluff.org/departments-services/community-development/50-building-permit-process (accessed 2026-10-23)
- Village of Lake Bluff, Adopted Building Codes — https://www.lakebluff.org/departments-services/community-development/1003-adopted-building-codes (accessed 2026-10-23)
- Village of Libertyville, Residential Permits — https://www.libertyville.com/departments/community_development/building/general_permit/residential_permit.php (accessed 2026-10-23)
- Village of Libertyville, Online Permit Application — https://www.libertyville.com/departments/community_development/building/online_permit_application.php (accessed 2026-10-23)
- Libertyville Municipal Code Sec. 26-12-2 Noise — https://library.municode.com/il/libertyville/codes/code_of_ordinances?nodeId=LIILMUCO_CH26ZO_ART12PEST_S26-12-2NO (accessed 2026-10-23)
- Village of Grayslake, Building Department FAQs — https://www.villageofgrayslake.com/669/Frequently-Asked-Questions-FAQs (accessed 2026-10-23)
- Village of Grayslake, BDH-1 General Construction Information handout — https://villageofgrayslake.com/DocumentCenter/View/10574/BDH-1-General-Construction-Information-Handout (accessed 2026-10-23)
- Village of Mundelein, Building & Construction Permits — https://www.mundelein.org/405/Building-Construction-Permits (accessed 2026-10-23)
- Village of Mundelein, Homeowner Project Guide — https://www.mundelein.org/DocumentCenter/View/4301/Project-Information-Packet—050426-PDF (accessed 2026-10-23)
- Mundelein Municipal Code 20.52.060(K) Mechanical Equipment — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT20ZO_CH20.52TEDEST_20.52.060PEEN (accessed 2026-10-23)
- Mundelein Municipal Code Chapter 9.08 Noise — https://library.municode.com/il/mundelein/codes/code_of_ordinances?nodeId=TIT9OFEAMOSA_CH9.08NO_9.08.020NOPR (accessed 2026-10-23)
- North Shore Gas Company tariff, Ill. C.C. No. 17 (communities served) — ICC tariff book, North Shore Gas (accessed 2026-10-23)
- North Shore Gas, Service Area — https://www.northshoregasdelivery.com/company/area (accessed 2026-10-23)
- North Shore Gas, About (54 communities between Winnetka and the Wisconsin border) — https://www.northshoregasdelivery.com/company/about (accessed 2026-10-23)
- Nicor Gas, Where We Are (county service lists) — https://www.nicorgas.com/company/where-we-are.html (accessed 2026-10-23)
- Nicor Gas, Our Service Area (ZIP lookup) — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-10-23)
- ComEd service territory, ICC filing Part 285.305 — https://icc.illinois.gov/downloads/public/edocket/272285.PDF (accessed 2026-10-23)
- American Public Power Association, Public Power in Illinois — https://www.publicpower.org/public-power-illinois (accessed 2026-10-23)
- Generac spec sheet, 10/14/18 kW air-cooled standby generator — https://productmanuals.generac.com/api/manualfiles/G0072580/A0005151081/0 (accessed 2026-10-23)
- Generac spec sheet, 22-28 kW air-cooled standby generator — https://productmanuals.generac.com/api/manualfiles/G0072600/A0005151077/0 (accessed 2026-10-23)
- GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
