Authorized Weil-McLain dealer · Will County, IL

Authorized Weil-McLain Dealer Serving Will County, IL

GSHA Services, LTD is an authorized Weil-McLain dealer and installer serving Will County homeowners from Joliet and Plainfield to New Lenox, Bolingbrook and Romeoville. We have no office in Will County: estimators, installation crews and our own licensed electricians are dispatched from our Woodstock office in McHenry County and our Lake Bluff office in Lake County. On a Weil-McLain job we calculate the heat loss, install the boiler and any indirect water heater, handle the near-boiler piping, gas piping, venting, condensate and electrical work, pull the municipal permit, run a combustion test at start-up and walk you through the controls. GSHA installs and services other boiler brands too, so a Weil-McLain recommendation is a fit for your house, not the only thing we sell.

Will County has the newest housing of any county we serve. The median home was built in 1992, only about 37 percent of homes predate 1980, and about 7 percent predate 1940 (Census Bureau ACS 2020-2024). Gas is nearly universal: 87.9 percent of occupied homes heat with utility gas, 2.0 percent with bottled or LP gas and 9.3 percent with electricity, and Nicor Gas serves the Will County communities we checked. Most homes here are forced air, so the boilers we see fall into two groups: radiant floor and baseboard systems in newer custom homes, and radiator systems in the older parts of Joliet, Lockport and Lemont.

Request a free installation estimateCall (224) 220-3660

Combustion analyzer printout from a GSHA Services boiler start-up
GSHA records a combustion analysis at every boiler start-up before calling the job done.

Communities we serve in Will County

GSHA’s published service-area ZIP list includes these Will County communities: Joliet, the county seat, whose city limits also reach into Kendall County; New Lenox, Crest Hill and Romeoville, which lie entirely within Will County; Plainfield, partly in Kendall County; Bolingbrook, shared with DuPage County; and Channahon, which extends into Grundy County. Four more listed communities sit mostly outside Will County but include Will County neighborhoods: Naperville (mostly DuPage County), Aurora (mostly DuPage, Kane and Kendall counties), Lemont (mostly Cook County, also DuPage) and Tinley Park (mostly Cook County). In a cross-county town the building department depends on which side of the line your house sits on, and GSHA sorts that out during the estimate.

Crete is not on the published ZIP list, although GSHA crews have recently worked there; if you live in Crete or elsewhere in southern Will County, please confirm your address at (224) 220-3660 or through the estimate form before scheduling. The complete ZIP-code list is on the GSHA service area page.

Weil-McLain boiler guidance for Will County homes

Radiant floors in newer custom homes. Some of Will County’s newer custom homes and additions were built with hydronic radiant floors or a radiant basement slab, often alongside forced air upstairs. Radiant floors run at low water temperatures, which is exactly where a condensing boiler is most efficient, because the return water stays cool enough to condense the flue gases all season. Weil-McLain’s wall-hung ECO Tec (80 to 199 MBH, 95% AFUE, stainless steel firetube heat exchanger, Unity 2.0 control) and AquaBalance Series 2 (80 to 155 MBH, 95% AFUE, 316L stainless steel heat exchanger) fit these systems, and the Ultra Gas Series 4, which Weil-McLain describes as designed for low-temperature condensing applications, adds a 5:1 turndown and a U-Control that can manage one to three setpoints for different zones. GSHA calculates the heat loss of the radiant zones and checks the floor’s design water temperature before choosing a size.

Radiators in older Joliet, Lockport and Lemont. About 7 percent of Will County housing predates 1940, concentrated in the older neighborhoods of Joliet, Lockport and Lemont, and many of those houses still have cast iron radiators. Where the chimney is sound and the homeowner wants a direct swap, the Weil-McLain CGa Series 4 (84% AFUE, natural draft, 38 to 233 MBH) goes back on the chimney, and GSHA publishes its installed-from prices on our Weil-McLain prices page. A steam system gets the EG Series 7, rated for water or steam. Where the radiators can run cooler, a condensing ECO Tec or GV90+ with outdoor reset saves more gas.

Domestic hot water: indirect tanks for large households. Will County’s three- and four-bedroom homes often have three full baths. When a boiler is in the house, an indirect water heater is a strong way to supply that demand: a heat-only boiler heats an Aqua Plus or Aqua Pro tank, and the stored hot water covers several showers at once. Weil-McLain rates the Aqua Pro 80 at a first-hour output of 381 gallons per hour and the Aqua Pro 119 at 477, and the Aqua Plus is 316L stainless steel with no anode rod. Where space is tight and demand is moderate, a combi (ECO Tec C with hot water output up to 5.4 GPM, AquaBalance C or Simplicity) replaces both the boiler and the water heater.

Smart controls when the service office is a drive away. Because our crews come from Woodstock and Lake Bluff, controls that report clearly are worth having. The Simplicity combi connects to a smartphone over Bluetooth, the ECO Tec’s Unity 2.0 control has a color touchscreen, and the Ultra Gas U-Control displays service alerts and maintenance reminders. Weil-McLain also lists its ECO Tec, AquaBalance, Ultra and Simplicity boilers as heat pump ready, which matters to homeowners who may add a heat pump later; GSHA discusses that option at the estimate.

Permits, utilities and installation considerations

In Will County the contractor pulls the permit and the municipality inspects the work; GSHA handles the application, specification sheets, contractor registration and inspections. Here is what the municipalities we checked publish for heating equipment and related work.

  • Village of New Lenox. The Miscellaneous Permits Guide lists furnaces, water heaters and garage heating units among the projects that require a permit, asks for the manufacturer’s specifications, and requires any venting modification, such as a change from a draft-hood vent to direct vent, to be submitted with the application. We confirm how New Lenox classifies a boiler replacement and include the Weil-McLain venting details with the application. Contractors must register with the village.
  • City of Lockport. The building permit FAQ describes an Over the Counter Permit that includes HVAC and water heaters, reviewed quickly without building plans or plats; contractors register with the Building Department first (Building Services).
  • City of Joliet. The contractor, not the homeowner, must pull the permit, and Joliet requires contractor registration, a certificate of insurance and a per-project letter of intent; permits are not issued over the counter (residential permit information).
  • Village of Plainfield. Permits go through the Permitting & Licensing Portal, and the building codes page lists the adopted plumbing, mechanical, fuel gas and electrical codes; GSHA confirms the boiler submittal with the Building Department.
  • Unincorporated Will County. The Land Use Department Building Section permits through its SmartGov portal. Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment and electrical installations, with an emergency-repair exception if the permit is applied for the next business day, and every contractor must be registered with the county.
  • Other municipalities (Bolingbrook, Romeoville, Crest Hill, Channahon, Naperville, Aurora, Lemont, Tinley Park) have their own building departments; GSHA confirms the requirement for your address before scheduling.

Venting in newer homes. Weil-McLain’s condensing boilers vent through PVC, CPVC, polypropylene or stainless steel as listed for each model, so a basement boiler usually vents out the rim joist or up through an unused chase. In newer subdivisions with tight side yards, we place the termination to keep clearances from windows, doors, the gas meter and the neighboring house, and in New Lenox the venting details go in with the permit application. If an older boiler shared a vent with a gas water heater, the water heater’s vent is checked once it is alone. Condensate is neutralized before it reaches a floor drain or condensate pump.

Gas supply. A boiler at 150 or 199 MBH, or a combi that also makes hot water, can draw more gas than the equipment it replaces. The meter and the furnace, range, dryer and any fireplace on the same line decide what the system can supply; meter-capacity questions go to Nicor Gas, and GSHA sizes and runs the piping and installs a new gas valve.

Utilities and rebates. Nicor Gas’s service territory names Will County communities including Aurora, Bolingbrook, Channahon, Crest Hill, Frankfort, Crete and Joliet, and New Lenox, Lockport and Plainfield name Nicor Gas on their own resident pages; a ZIP lookup on nicorgas.com is the definitive check. ComEd delivers electricity across most of the county, while most of Naperville, including its Will County portion, is served by the city’s own electric utility; neither affects a gas boiler rebate. Nicor Gas’s 2026 residential rebates include boilers at 95% AFUE and above under 300 MBTUH, which Weil-McLain’s ECO Tec, AquaBalance and Simplicity meet and the Ultra Gas, GV90+ and cast iron boilers do not, and a combination-boiler measure requiring a sealed combustion unit capable of modulating, and a programmed outdoor reset control; Nicor lists no indirect water heater measure. Equipment must be installed during 2026 and claimed within 90 days or by January 31, 2027. Check current eligibility with Nicor Gas.

What GSHA handles. Removal of the old boiler, near-boiler piping, circulators and zone controls (including radiant manifolds where present), gas piping and a new gas valve, venting and the condensate neutralizer, outdoor reset sensor, any indirect tank, the electrical connection by our own licensed electricians, the permit, the inspection, combustion analysis at start-up, Weil-McLain registration and a walkthrough of the controls.

Recent GSHA work in Will County

GSHA crews have recently worked in Joliet, Romeoville, Crest Hill, Channahon and Frankfort, and in Crete in the southern part of the county, where we ask homeowners to confirm coverage for their address before booking.

Weil-McLain products we install in Will County

The same Weil-McLain lineup is available county-wide. Featured models, ratings and published prices are on the main Weil-McLain dealer page.

ECO Tec

95% AFUE wall-hung boiler suited to radiant floors.

Featured: ECO Tec 80-H to 199-H

Explore ECO Tec

AquaBalance and Ultra

Compact AquaBalance; Ultra Gas for low-temperature multi-zone systems.

Featured: AB-80H to AB-155H, ULTRA-80 to ULTRA-399

Explore AquaBalance and Ultra

Indirect water heaters

Aqua Pro up to 477 GPH first-hour; Aqua Plus stainless.

Featured: Aqua Plus, Aqua Pro

Explore indirect tanks

Combi-boilers

Heat and hot water from one wall-hung unit.

Featured: ECO Tec C, AquaBalance C, Simplicity

Explore combis
Weil-McLain GV90+ gas boiler

GV90+

Cast iron primary with stainless condensing secondary.

Featured: GV90+3 to GV90+6

Explore the GV90+
Weil-McLain CGa cast iron gas boiler

CGa and CGi

Cast iron for radiator homes in older Joliet and Lemont.

Featured: CGa-25 to CGa-8, CGi-25 to CGi-8

Explore the CGa

EG steam/water

Cast iron steam boiler for the oldest homes.

Featured: EG-30 to EG-75

Explore the EG

Oil boilers

WGO, WTGO, Ultra Oil and SGO for rural oil-heated homes.

Featured: WGO, WTGO, Ultra Oil

Explore oil boilers

Current Weil-McLain offers

Ask GSHA about current Weil-McLain offers.

Each Weil-McLain offer names its own models and dates; tell us when you plan to install and we will say which applies. Financing through Synchrony and Service Finance is on our financing page.

Utility rebates run separately; check current eligibility with Nicor Gas.

Questions and answers

Do you serve my Will County address?

Yes, if you are in a listed ZIP: Joliet, New Lenox, Crest Hill, Romeoville, Plainfield, Bolingbrook or Channahon, or the Will County parts of Naperville, Aurora, Lemont and Tinley Park. Crete and other southern Will County addresses should call (224) 220-3660 to confirm first.

Which Weil-McLain boiler is best for a radiant floor?

Radiant floors run at low water temperatures, which suits a condensing boiler. The 95% AFUE ECO Tec and AquaBalance and the modulating Ultra Gas Series 4 are all good fits; GSHA chooses among them from the radiant zones’ heat loss, the design water temperature and the space available.

Does New Lenox require venting details with a permit?

New Lenox’s Miscellaneous Permits Guide requires any venting modification, such as a change from a draft-hood vent to direct vent, to be submitted with the application, along with the manufacturer’s specifications. GSHA includes the Weil-McLain venting details and confirms how the village classifies a boiler replacement.

Should I get a combi or an indirect water heater?

For a three-bath household that runs several showers at once, a heat-only boiler with an Aqua Pro or Aqua Plus indirect tank stores hot water; the Aqua Pro 80 has a first-hour rating of 381 gallons per hour. A combi saves space when demand is moderate. We count fixtures at the estimate.

Does a Weil-McLain boiler qualify for a Nicor Gas rebate?

The 95% AFUE ECO Tec, AquaBalance and Simplicity meet Nicor’s 2026 boiler threshold; the Ultra Gas, GV90+ and cast iron models do not. The combination-boiler measure also requires modulation and a programmed outdoor reset control, and Nicor lists no indirect water heater measure. Check current eligibility with Nicor Gas.

Is a heating permit required in unincorporated Will County?

Yes. Will County Building Ordinance Sec. 150.003 requires a permit in advance for heating equipment and electrical installations, with an emergency-repair exception if the permit is applied for the next business day. Contractors must be registered with the county; GSHA is set up to file.

How do you handle service from Woodstock and Lake Bluff?

Call (224) 220-3660 and we schedule a technician. Telling us what the boiler’s display shows when you call helps us arrive with the right parts.

Do you service Weil-McLain boilers installed by others?

Yes. GSHA repairs and maintains Weil-McLain boilers from any installer, including discontinued models. See boiler repair & maintenance.

More Weil-McLain pages

Weil-McLain Authorized Dealer in Illinois (main page) · Weil-McLain boilers: prices and installation cost · Boiler installation · Boiler repair & maintenance

Other counties

Request a free Weil-McLain installation estimate

Tell us about your home and the boiler you are considering in Will County. We will follow up to schedule a free, no-obligation in-home visit, calculate the heat loss, check the existing venting, gas supply, piping and electrical, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

In-home visit

A GSHA comfort advisor checks the existing boiler and system and explains the Weil-McLain options that fit.

Written quote

You receive an itemized quote with the equipment, warranty registration, permits and the work included. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Weil-McLain dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. We install and service Weil-McLain boilers across the northern and western Chicago suburbs; see the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Census Reporter API – ACS 2020-2024 5-year tables B25040, B25035, B25034, Will County (05000US17197) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25040,B25035,B25034&geo_ids=05000US17197 (accessed 2026-10-23, via GSHA Navien Will County page)
  2. Weil-McLain ECO Tec Gas Boiler Series 3 — https://www.weil-mclain.com/products/eco-tec-boiler-3/ (accessed 2026-10-23)
  3. Weil-McLain AquaBalance Series 2 — https://www.weil-mclain.com/products/aquabalance-series-2/ (accessed 2026-10-23)
  4. Weil-McLain Ultra Gas Boiler Series 4 (low-temperature condensing applications; U-Control) — https://www.weil-mclain.com/products/ultra-s4-gas-boiler/ (accessed 2026-10-23)
  5. Weil-McLain Simplicity Gas Combi Boiler — https://www.weil-mclain.com/products/simplicity-gas-combi-boiler/ (accessed 2026-10-23)
  6. Weil-McLain GV90+ Gas Boiler — https://www.weil-mclain.com/products/gv90-gas-boiler/ (accessed 2026-10-23)
  7. Weil-McLain CGa Gas Boiler Series 4 — https://www.weil-mclain.com/products/cga-gas-boiler-series-4/ (accessed 2026-10-23)
  8. Weil-McLain EG Series 7 Gas Boiler — https://www.weil-mclain.com/products/eg-series-7-gas-boiler/ (accessed 2026-10-23)
  9. Weil-McLain Aqua Plus Indirect-Fired Water Heater Series 2 — https://www.weil-mclain.com/products/aqua-plus-indirect-fired-water-heater-series-2/ (accessed 2026-10-23)
  10. Weil-McLain Aqua Pro Indirect-Fired Water Heater — https://www.weil-mclain.com/products/aqua-pro/ (accessed 2026-10-23)
  11. Village of New Lenox – Miscellaneous Permits Guide — https://www.newlenox.net/DocumentCenter/View/113 (accessed 2026-10-23, via GSHA Navien Will County page)
  12. Village of New Lenox – contractor registration FAQ — https://www.newlenox.net/m/faq?cat=16 (accessed 2026-09-16)
  13. City of Lockport – building permit FAQ — https://www.cityoflockport.net/Faq.aspx?QID=68 (accessed 2026-10-23, via GSHA Navien Will County page)
  14. City of Lockport – Building Services — https://cityoflockport.net/133/Building (accessed 2026-09-16)
  15. City of Joliet – building permit forms — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/building-permit-forms (accessed 2026-09-16)
  16. City of Joliet – residential permit information — https://www.joliet.gov/government/departments/community-development/building-inspectional-services-division/residential-building-permit-information (accessed 2026-09-16)
  17. Village of Plainfield – Building and Code Enforcement — https://www.plainfieldil.gov/departments/building-and-code-enforcement (accessed 2026-09-16)
  18. Village of Plainfield – Building Codes — https://www.plainfieldil.gov/departments/building-and-code-enforcement/building-codes (accessed 2026-09-16)
  19. Will County Land Use Department – Building — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building (accessed 2026-10-23)
  20. Will County Building Ordinance Sec. 150.003 — https://codelibrary.amlegal.com/codes/willcounty/latest/willcounty_il/0-0-0-47886 (accessed 2026-09-16, via GSHA Lennox Will County page)
  21. Will County contractor registration — https://willcounty.gov/County-Offices/Economic-Development/Will-County-Land-Use-Department/Development-Services-Division/Building/FileId/1987 (accessed 2026-09-16)
  22. Nicor Gas Residential Energy Efficiency Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
  23. Nicor Gas – Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-10-23)
  24. City of Naperville Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
  25. GSHA Weil-McLain Boilers Prices and Installation Cost page — https://gshaservices.com/hvac-services-illinois-wisconsin/boiler-installation/weil-mclain-boilers-prices/ (accessed 2026-10-23)
  26. GSHA service area page — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
  27. GSHA financing page — https://gshaservices.com/financing/ (accessed 2026-10-23)