Authorized Corro-Protec Dealer · Will County, IL
Corro-Protec Powered Anode Rods in Will County, IL
GSHA crews travel into Will County from our Woodstock headquarters and our Lake Bluff office. As an authorized Corro-Protec dealer and installer, we fit Corro-Protec powered anode rods into gas and electric tank water heaters, with our own plumbing crews doing the work and our own licensed electricians adding an outlet when needed.
Will County’s water is in transition. Joliet’s latest drinking water quality report describes a groundwater system of 21 deep bedrock wells and 5 shallow gravel wells, and the Grand Prairie Water Commission, whose members include Joliet, Crest Hill and Romeoville, plans to begin buying treated Lake Michigan water from the City of Chicago in 2030. Today’s well water and tomorrow’s lake water are different, but in both cases the steel tank in your basement relies on its anode.
Communities we serve in Will County
Our published ZIP list includes Joliet, the county seat, whose limits also reach into Kendall County; New Lenox, Crest Hill and Romeoville; Plainfield, partly in Kendall County; and Bolingbrook, which is shared with DuPage County, along with other Will County addresses on the list. Water systems in these communities differ, so we ask which utility serves your home.
Crete is not on the published ZIP list. If you live there or elsewhere in southern Will County, please confirm your address at (224) 220-3660 or through the estimate form before scheduling. The complete list is on our service area page.
What Will County water means for a water heater
Joliet’s drinking water quality report
Joliet’s 2024 Drinking Water Quality Report, distributed in June 2025, is the most recent full city report we could read. It describes groundwater from 21 deep bedrock wells about 1,000 feet deep and 5 shallow gravel wells about 80 feet deep, with the city currently drawing from the Ironton-Galesville aquifer. Treatment uses hydrous manganese oxide (HMO), which the report says removes up to 90 percent of radium along with iron and manganese, and a blended ortho-polyphosphate is added for corrosion control. The text says sodium hypochlorite is added for disinfection, while the report’s disinfectant table lists chloramines at up to 2.2 ppm (range 1 to 2.2 ppm).
The report gives no measured hardness value. It says the dissolved minerals in the water account for its hardness and that Lake Michigan water will have lower hardness. Sodium is listed at 60.3 to 119 ppm, and the report notes sodium is used in water softener regeneration.
| Item | Joliet 2024 report | Why it matters for a water heater |
|---|---|---|
| Source | 21 deep bedrock wells and 5 shallow gravel wells | Mineral-rich groundwater today |
| Treatment | HMO for radium, iron and manganese; ortho-polyphosphate for corrosion control | Utility corrosion control protects pipes; your tank still needs its anode |
| Disinfectant | Chloramines in the report’s table (up to 2.2 ppm) | Corro-Protec states its rod can be used with any water treatment system |
| Hardness | No value given; Lake Michigan water expected to be lower | Hardness may change after the switch; a powered anode does not change it |
Bolingbrook, Plainfield, New Lenox and other Will County communities operate or buy water through their own systems and publish their own annual reports.
Corro-Protec guidance for Will County homes
Groundwater homes today
On mineral-rich groundwater, the steel tank in a water heater is protected by its anode wherever the glass lining is imperfect. A sacrificial anode is consumed doing that job, and Corro-Protec’s FAQ notes that heater makers often call for anode inspection every one to three years to keep tank warranties valid. A Corro-Protec rod, titanium coated with mixed metal oxide, protects the tank with a small current from its power supply instead of dissolving, and shows a green light while it is working.
The rotten-egg smell
Corro-Protec attributes a hot-water rotten-egg smell to hydrogen sulfide produced when sulfur-reducing bacteria react with sulfates, sometimes along with a magnesium anode, and says its rod eliminates the smell in most cases within 24 hours. The Minnesota Department of Health, writing for well owners, notes that a magnesium anode can help convert sulfate to hydrogen sulfide, suggests comparing hot and cold taps to find the source, and warns that removing the anode altogether may significantly shorten the heater’s life. Homes on private wells in rural Will County can check our well water guide if both taps smell.
Softeners
Joliet’s report mentions sodium from water softener regeneration, and many homes on hard groundwater soften. Corro-Protec says its rod can be used safely with any water treatment system, so a softener is not a reason to skip it. The rod itself does not soften water; for that, see our water filtration page.
Choosing the model
The standard 40-89 gallon dedicated-port rod (part 96387) fits the usual 40 or 50 gallon tank. Bradford White heaters with the anode in the hot water outlet need the hot-outlet model (96383); Corro-Protec warns that a dedicated-port model in a hot water outlet voids the warranty. The 10-39 gallon rod (96386) and the 19-inch 90-120 gallon rod (96388) cover smaller and larger tanks.
Planning around the 2030 switch to Lake Michigan water
According to a Grand Prairie Water Commission fact sheet published by the Village of Minooka, the Commission’s members are Channahon, Crest Hill, Joliet, Minooka, Romeoville and Shorewood, and in 2030 the Commission will begin purchasing treated Lake Michigan water from the City of Chicago, moving those communities from their existing groundwater supplies. Here is how we think about that change for a water heater, as our own practical advice rather than a utility statement.
- The tank still needs protection. Lake Michigan water is moderately hard and chlorinated in the communities that already use it, and glass-lined steel tanks served by it still rely on anodes. A Corro-Protec rod installed now keeps working after the switch; nothing about it is tied to a particular water source.
- Hardness is expected to drop. Joliet’s report says Lake Michigan water will have lower hardness. If you run a softener, it is worth having its settings reviewed when the new supply arrives.
- A water heater bought today will see both waters. If you are replacing a heater in the next few years, it will spend part of its life on groundwater and part on lake water. A powered anode in the new tank avoids having to think about the anode at all through that change.
- Watch your utility’s notices. Your city will publish details of the changeover, including any change in treatment, in its notices and annual reports. We read them too.
Permits, power and installation considerations
Permits
An anode retrofit is maintenance on an existing water heater. We have not found a Will County municipality that lists it as a separate permit type, but we have not reviewed every code, and rules differ between Joliet, the villages and unincorporated Will County. GSHA confirms with the building department for your address and pulls any permit the job requires, which is most likely if we add a receptacle or replace the heater.
Power
The power supply has a 12-foot cord, and Corro-Protec’s warranty requires continuous power and proper grounding. If there is no grounded receptacle within reach, or the nearest one is switched, our licensed electricians install a suitable one.
Headroom and tank condition
The regular rod needs about a foot of clearance above the tank, and the X-Large rod more. On hard groundwater an older tank may carry heavy sediment, and an old anode may be fused in place; we inspect before installing and tell you if the tank itself is failing. A powered anode protects a sound tank; it cannot repair a leak. Replacement options are on our water heater services page.
Installation day in Will County
Because our crews travel to Will County from Woodstock and Lake Bluff, we confirm the part at the estimate so the installation can be done in one visit. On the day, the technician:
- Confirms the heater and part. Capacity, fuel, anode location (dedicated port or hot water outlet), thread size and headroom are checked against the quote.
- Shuts the heater down safely. Gas control or breaker off, cold supply closed, pressure relieved and a few gallons drained.
- Removes the old anode. Corro-Protec specifies a 1-1/16 inch (27 mm) socket for removal. Anodes that have spent years in mineral-rich groundwater can be fused in place; we free them without stressing the tank.
- Installs the Corro-Protec rod. Sealed and tightened to about 22 foot-pounds, Corro-Protec’s suggested torque, or with the supplied stainless elbow, nipple and tee on a hot-outlet heater.
- Refills, restarts and powers up. The tank is refilled and purged of air, fittings are checked for leaks, the heater is restarted, and the power supply is plugged in and its green light confirmed.
- Registers the warranty. We register the extended warranty with you inside Corro-Protec’s 90-day window and leave the invoice and serial number.
If the old anode or the drained water shows that the tank is in poor shape, or we find a leaking relief valve or a venting problem, we stop and explain the options before going further. And if you are planning to replace the heater before 2030 anyway, we can price a new tank with a Corro-Protec rod fitted at the same time.
Corro-Protec models we install in Will County
The same residential models are available throughout our Will County service area. Specifications are on the main Corro-Protec page.
Dedicated port, 10-39 gal
Compact tanks with a separate anode port.
Part no. 96386
Model detailsDedicated port, 40-89 gal
The standard model for typical 40 and 50 gallon tanks.
Part no. 96387
Model detailsDedicated port, 90-120 gal
X-Large 19-inch rod for big tanks.
Part no. 96388
Model detailsHot water outlet, 10-120 gal
Fits most Bradford White heaters; Buderus version available.
Part no. 96383 (96382 Buderus)
Model detailsCorro-Protec offers in Will County
Ask GSHA about current Corro-Protec offers.
No Corro-Protec promotion was confirmed current on both corroprotec.com and gshaservices.com when this page was checked on 2026-10-23, so none is listed. Corro-Protec’s product page describes a 90-day money-back guarantee with its limited warranty. GSHA’s financing programs are on our financing page.
Will County questions and answers
Joliet is switching to Lake Michigan water. Should I wait to protect my water heater?
There is no need to wait. A Corro-Protec rod is not tied to a water source, so one installed now keeps protecting the tank before and after the Grand Prairie Water Commission switch planned for 2030.
Is Joliet water hard?
Joliet’s report does not give a hardness number, but it says the water’s dissolved minerals account for its hardness and that Lake Michigan water will be lower in hardness. Homes on well water elsewhere in the county vary.
Does chloramine in the water matter for a powered anode?
Corro-Protec lists compatibility by heater type and size, not by disinfectant, and says its rod can be used with any water treatment system. We install it the same way on chloraminated and chlorinated water.
The hot water smells but the cold does not. What now?
That points to the water heater. Corro-Protec says its rod eliminates the smell in most cases within 24 hours, and we confirm the pattern at the visit.
Do I need a permit in Joliet or Plainfield?
We have not found an anode retrofit listed as a separate permit type, but local rules vary. GSHA checks with your building department and handles any permit required.
What warranty comes with it?
Corro-Protec’s written warranty covers the rod and power supply for 5 years, and the rod for up to 20 years, prorated from year 6, when registered within 90 days of purchase. GSHA registers it with you after installation.
More Corro-Protec and water heater pages
Corro-Protec Authorized Dealer in Illinois (main page) · Corro-Protec powered anode rod installation · Water heater services · Gas tank vs. tankless vs. heat pump water heaters · Well water problems in northwest Illinois
Other counties
Request a free Corro-Protec installation estimate
Tell us about your water heater in Will County: brand, size, fuel, rough age, city water or well, and whether the hot water smells. We will follow up to confirm the right Corro-Protec model and schedule a free, no-obligation visit.
Send the form or call
Use the form here, book online, or call (224) 220-3660.
Fit check
A GSHA technician confirms the anode location, thread, headroom and power, and checks the condition of the heater.
Written quote
You receive an itemized quote for the rod, installation, any electrical work and warranty registration. No obligation.
If the form does not load, email info@gshaservices.com or call (224) 220-3660.
About GSHA Services, LTD
GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Corro-Protec dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and 11 N Skokie Hwy, Lake Bluff, IL 60044. Phone (224) 220-3660. Email info@gshaservices.com. GSHA Services is an independent dealer, not Corro-Protec; product warranties are provided by the manufacturer. See the full service area by ZIP code. Contact us · Financing · All products and brands
Sources
- City of Joliet, 2024 Drinking Water Quality Report (distributed June 2025) — https://www.joliet.gov/home/showpublisheddocument/36625/639026112238500000 (accessed 2026-10-23)
- Grand Prairie Water Commission, Chicago water quality fact sheet (published by the Village of Minooka) — https://www.minooka.com/media/rqjpqc2x/gpwc_chicago_water_quality_fact-sheet.pdf (accessed 2026-10-23)
- Minnesota Department of Health, Hydrogen Sulfide in Well Water — https://www.health.mn.gov/communities/environment/water/wells/waterquality/hydrosulfide.html (accessed 2026-10-23)
- Corro-Protec FAQ — https://www.corroprotec.com/faq/ (accessed 2026-10-23)
- Corro-Protec Powered Anode Rod for Water Heaters (product page) — https://www.corroprotec.com/product/water-heater-anode-rod/ (accessed 2026-10-23)
- Corro-Protec Limited Warranty — https://www.corroprotec.com/corro-protec-limited-warranty/ (accessed 2026-10-23)
- GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)
