Authorized Williams dealer · DuPage County, IL

Williams Wall Furnaces Installed in DuPage County, IL

GSHA Services, LTD is an authorized Williams dealer and installer serving homeowners across DuPage County. GSHA has no office in DuPage; our crews come from our offices in Woodstock (McHenry County) and Lake Bluff (Lake County). We supply and install Williams direct-vent wall furnaces, Forsaire counterflow furnaces, Monterey top-vent furnaces, floor furnaces and vented console heaters, with gas piping, venting, any electrical work by our own licensed electricians, the municipal permit and the inspection handled by one company.

DuPage’s housing is older than many people assume: the Census Bureau’s 2024 five-year American Community Survey puts the median home’s build year at 1978, and 83.0 percent of occupied homes heat with utility gas, 14.7 percent with electricity and 1.1 percent with bottled or LP gas. Decades of additions, sunrooms, finished basements and converted garages have left many of those houses with a room the original furnace does not keep comfortable. A Williams wall furnace solves that one room without reworking the duct system.

Request a free installation estimateCall (224) 220-3660

Direct-vent Williams furnaces use outside air for combustion, not room air.

Communities we serve in DuPage County

GSHA’s published service area includes Addison, Bensenville, Bloomingdale, Carol Stream, Elmhurst, Glen Ellyn, Glendale Heights, Itasca, Lombard, Roselle, Villa Park, Warrenville, West Chicago, Wheaton (the county seat), Winfield and Wood Dale. Several covered municipalities straddle county lines: Aurora extends into Kane and Will, Bartlett into Cook and Kane, Bolingbrook and Naperville into Will, Hanover Park into Cook, and Lemont into Cook and Will. Whichever side of the line your house is on, the crew and equipment are the same; the permit office and sometimes the electric utility change.

Downers Grove, Woodridge, Hinsdale, Lisle, Westmont and Oak Brook are also on the published ZIP list. Burr Ridge is not named on it, although its 60527 ZIP code is listed; if you live there, please confirm your address with GSHA at (224) 220-3660 or through the estimate form before scheduling. The full list is on the GSHA service area page.

Choosing a Williams unit for a DuPage County home

Additions and sunrooms on 1970s houses. A ranch, split-level or two-story built around 1978 often has a family room addition or a four-season room hung off the back, heated by a duct run stretched beyond its reach. A Williams direct-vent gravity furnace on that room’s exterior wall (14,000, 22,000 or 30,000 BTU/hr input) heats it independently and needs no electricity. If the room is large or opens to a kitchen, a Forsaire direct-vent counterflow furnace (40,000 to 60,000 BTU/hr, up to 80 percent AFUE) adds a blower that pushes warm air from ceiling to floor, with outlet kits that can share heat with up to three rooms.

Small rooms and offices. For a home office, a converted porch or a bathroom-sized space, the Williams 7,400 BTU/hr high-efficiency direct-vent unit mounts on an exterior wall with no floor space, uses no indoor air for combustion and includes a built-in seven-day programmable timer. Its 17,700 BTU/hr sibling adds a two-speed recirculating fan and runs on 120 volts.

Electric-heated condos and townhomes. About one DuPage home in seven heats with electricity. A gas wall furnace needs gas service, and in many condos and townhomes the association controls exterior walls, so we start with what is allowed. Where gas is not available or not permitted, the Williams Solana electric counterflow furnace keeps the slim wall-furnace format, and a ductless heat pump is the other option we price.

Garages. Williams markets direct-vent counterflow, gravity and high-efficiency models for garages and workshops. For a three-car or detached garage, compare those against a unit heater on our garage heater installation page; we look at both on the estimate.

Permits, utilities and installation considerations

Permits and inspections by municipality

In the DuPage municipalities checked for this page and in unincorporated DuPage County, installing or replacing a furnace goes through the local building department. GSHA pulls the permit, meets the inspector and closes out the job.

  • Wheaton. The Furnace & Air-Conditioner – Residential page lists the submittals: furnace brand, efficiency and BTUs, the manufacturer’s specifications and, for a non-high-efficiency gas appliance, a combustion-air worksheet. That worksheet is relevant to top-vent Williams furnaces, which draw combustion air from the room; direct-vent models take it from outdoors. Wheaton also requires sizing from a load calculation and a programmable thermostat.
  • Glen Ellyn. The What Application to Use table makes a residential furnace replacement a Small Building Permit with Plan Review, while a gas-piping change by itself is an over-the-counter permit; the Work That Requires a Building Permit sheet names forced-air heating and natural gas systems.
  • Lombard. The Furnace Replacement Residential handout answers “permit required? yes,” calls for a final HVAC inspection, requires the installation manual and a Manual J or equal on site, and requires a programmable thermostat per the energy code. Fees are calculated at the end of review.
  • Downers Grove. The village Permits page says most projects need a permit and that applications, inspection requests and fees go through the online portal only.
  • Unincorporated DuPage County. Apply to the DuPage County Building & Zoning Department through its Accela portal; its Building and Permits page lists furnace replacement among online permits, its Permits and Forms page says work shall not begin before the permit is issued, and contractors must be registered with the county.

Other municipalities run their own building departments; GSHA confirms the process for your village at the estimate.

Programmable thermostats and millivolt controls

Wheaton and Lombard both require a programmable thermostat with a furnace permit. Most Williams gravity furnaces run on a millivolt gas valve with a separately sold millivolt thermostat, so the thermostat has to be one rated for millivolt systems. The 7,400 BTU/hr high-efficiency direct-vent unit has a programmable seven-day timer built in. GSHA specifies a compatible programmable control for each Williams model and confirms with the village that it satisfies the requirement before installation.

Venting

Direct-vent Williams furnaces vent through the wall right behind the unit, within the model’s maximum wall thickness (24 inches for gravity models, 12 inches for counterflow models, about 19 1/2 inches for high-efficiency models), using the vent kit Williams supplies. Top-vent Monterey and Forsaire models vent through the roof with Williams’ oval vent system. The cap location follows the Williams installation manual and the fuel gas code your municipality has adopted, and we add a vent cap guard where it sits beside a walkway or patio.

Utilities

Nicor Gas is the gas utility named by Wheaton, Glen Ellyn, Lombard and Woodridge, and ComEd delivers their electricity; confirm your address on Nicor’s service-area lookup. Most of Naperville is served by the city’s own municipal electric utility. Nicor’s 2026 residential rebate program sets its furnace tiers at 95 and 97 percent AFUE, and the Williams models we install are rated at or below 80 percent, so a Williams unit should be budgeted without that rebate.

Gas, electrical and what GSHA handles

GSHA runs and tests the gas piping from the existing line to the furnace and installs the shut-off, mounts the unit to Williams’ clearances (for example 4 inches from an intersecting wall for a Forsaire), installs the vent kit, and lights and tests the appliance. Where a counterflow model or the 17,700 BTU/hr high-efficiency unit needs power, our licensed electricians add the outlet or circuit, so no second contractor is needed. Financing options are on the GSHA financing page.

Williams products we install in DuPage County

The same Williams lines are available county-wide. Full models, ratings and spec-sheet details are on the main Williams page.

Direct-Vent Wall Furnaces

Gravity units vented through the wall; no electricity required.

14,000 / 22,000 / 30,000 BTU/hr

Details

High-Efficiency Direct-Vent

Low-profile sealed-combustion wall units for small rooms and garages.

7,400 / 17,700 BTU/hr

Details

Forsaire Counterflow

Blower-equipped, up to 80% AFUE, top-vent or direct-vent.

35,000-65,000 BTU/hr

Details

Monterey Top-Vent

Recessed or surface-mount gravity furnace vented through the roof.

25,000 / 35,000 / 50,000 BTU/hr

Details

Floor Furnaces

Blower-free furnace under a floor register; no electricity.

45,000 / 60,000 BTU/hr

Details

Vented Room Heaters

Enclosed or glass-front console heaters; optional blower.

20,000-65,000 BTU/hr

Details

Garage & Workshop

Direct-vent counterflow, gravity and high-efficiency models for garages.

Natural or propane

Garage heaters

Solana Electric

Electric counterflow furnace for spaces without gas.

Freestanding or recessed

Details

Current Williams offers

Ask GSHA about current Williams offers.

Financing programs available through GSHA are on our financing page.

Questions and answers

Is my DuPage address covered?

Yes if you are in Addison, Bensenville, Bloomingdale, Carol Stream, Elmhurst, Glen Ellyn, Glendale Heights, Itasca, Lombard, Roselle, Villa Park, Warrenville, West Chicago, Wheaton, Winfield or Wood Dale, or in the covered parts of Aurora, Bartlett, Bolingbrook, Naperville, Hanover Park or Lemont. Downers Grove, Woodridge, Hinsdale, Lisle, Westmont and Oak Brook are on the list too, and Burr Ridge addresses are confirmed by phone first.

Does Wheaton need a combustion-air worksheet for a Williams furnace?

Wheaton asks for one for a non-high-efficiency gas appliance. Top-vent Williams furnaces draw combustion air from the room, so the worksheet applies; direct-vent models take combustion air from outdoors through the vent. GSHA prepares the submittal with the Williams specifications.

Will my village accept a millivolt thermostat?

Wheaton and Lombard require a programmable thermostat with a furnace permit. GSHA specifies a programmable thermostat compatible with the Williams model’s millivolt or 24-volt controls and confirms it meets the local requirement.

Can I add a Williams wall furnace to a sunroom?

Usually, yes, if there is an exterior wall that can take the vent and a gas line can reach it. We check the wall construction and thickness against the Williams limits and size the unit for the glass area, which loses heat faster than a solid wall.

Does Nicor offer a rebate for a Williams furnace?

Not under Nicor’s 2026 furnace rebate, which starts at 95 percent AFUE. Williams wall furnaces are rated at or below 80 percent AFUE.

Does Lombard really want a Manual J for a wall furnace?

Lombard’s furnace replacement handout asks for the installation manual and a Manual J or equal on site at inspection. GSHA sizes every Williams installation from a heat-loss calculation and leaves that paperwork with the Williams manual.

What warranty comes with Williams?

Williams states a 10-year limited warranty on the combustion chamber and one year on other parts, contingent on installation by a qualified installer.

More Williams and heating pages

Williams authorized dealer in Illinois (main page) · Garage heater installation · Furnace installation · Furnace repair

Other counties

Request a free Williams installation estimate

Tell us about the room you want to heat in DuPage County. We will schedule a free, no-obligation visit, run the heat-loss numbers, choose the vent route, check the gas line and any electrical needs, and give you a written quote.

Send the form or call

Use the form here, book online, or call (224) 220-3660.

On-site visit

A GSHA comfort advisor measures the room, checks venting, gas and power, and explains the Williams options that fit.

Written quote

You receive an itemized quote with the equipment, vent kit, thermostat, gas piping, any electrical work and the permit. No obligation.

If the form does not load, email info@gshaservices.com or call (224) 220-3660.

About GSHA Services, LTD

GSHA Services, LTD is a licensed and insured heating, cooling, electrical, plumbing and generator contractor and an authorized Williams dealer and installer. Offices: 1257 Cobblestone Way, Suite A, Woodstock, IL 60098 and Lake Bluff, IL. Phone (224) 220-3660. Email info@gshaservices.com. See the full service area by ZIP code. Contact us · Financing · All products and brands

Sources

  1. Census Reporter API, ACS 2024 5-year tables B25035, B25040, DuPage County, IL (05000US17043) — https://api.censusreporter.org/1.0/data/show/acs2024_5yr?table_ids=B25035,B25040&geo_ids=05000US17043 (accessed 2026-09-16)
  2. Williams Direct-Vent spec sheet L1109 (June 2026) — https://williamscomfort.com/wp-content/uploads/2026/06/L1109_Direct_Vent_specSheet_6_26.pdf (accessed 2026-10-23)
  3. Williams High-Efficiency Direct-Vent spec sheet L1457 — https://williamscomfort.com/wp-content/uploads/2023/09/L1457_High_Efficiency-DV_spec_sheet-8_25.pdf (accessed 2026-10-23)
  4. Williams Forsaire spec sheet L1158 (June 2026) — https://williamscomfort.com/wp-content/uploads/2026/06/L1158_Forsaire_spec_sheet_EN_6_26.pdf (accessed 2026-10-23)
  5. Williams Garage Furnaces spec sheet L1171 (millivolt ignition, thermostat sold separately, wall limits) — https://williamscomfort.com/wp-content/uploads/2023/09/L1171_Garage_spec_sheet_4_21-1.pdf (accessed 2026-10-23)
  6. Williams Solana Electric Counterflow Furnace — https://williamscomfort.com/product/solana-electric-counterflow-furnace/ (accessed 2026-10-23)
  7. City of Wheaton – Furnace & Air-Conditioner – Residential — https://www.wheaton.il.us/813/Furnace-Air-Conditioner—Residential (accessed 2026-09-16)
  8. Village of Glen Ellyn – What Application to Use — https://www.glenellyn.org/DocumentCenter/View/1744/WHAT-APPLICATION-TO-USE (accessed 2026-09-16)
  9. Village of Glen Ellyn – Work That Requires a Building Permit — https://www.glenellyn.org/DocumentCenter/View/2329/Work-That-Requires-A-Building-Permit- (accessed 2026-09-16)
  10. Village of Lombard – Furnace Replacement Residential — https://www.villageoflombard.org/DocumentCenter/View/122/Furnace-Replacement-Residential-PDF (accessed 2026-09-16)
  11. Village of Lombard – Permit Requirements and Fees — https://www.villageoflombard.org/479/Permit-Requirements-and-Fees (accessed 2026-09-16)
  12. Village of Downers Grove – Permits — https://www.downers.us/permits (accessed 2026-09-16)
  13. DuPage County – Building and Permits — https://www.dupagecounty.gov/government/departments/building_and_zoning/building_and_permits/ (accessed 2026-09-16)
  14. DuPage County – Permits and Forms — https://www.dupagecounty.gov/government/departments/building_and_zoning/building_and_permits/permits_and_forms.php (accessed 2026-09-16)
  15. DuPage County – Contractor Registration — https://www.dupagecounty.gov/government/departments/building_and_zoning/building_and_permits/contractor_registration.php (accessed 2026-09-16)
  16. City of Naperville – Electric Utility — https://www.naperville.il.us/services/electric-utility/ (accessed 2026-09-16)
  17. Nicor Gas – Our Service Area — https://www.nicorgas.com/company/where-we-are/our-service-area.html (accessed 2026-10-23)
  18. Nicor Gas Residential Rebates 2026 — https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html (accessed 2026-10-23)
  19. GSHA service area page (ZIP-code list) — https://gshaservices.com/about-gsha-services/service-area/ (accessed 2026-10-23)